Professional Documents
Culture Documents
ME 204
Spring 2021
Section 03
HOMEWORK #3
Assigned: 16.05.2021
Due: 21.04.2021 (upload your solution to ODTÜCLASS until 21:00 pm)
Q1) A gas turbine engine with regeneration has a single compressor and two turbine
stages. Air enters the compressor at 1 bar, 300 K. The compressor pressure ratio is 6.
The temperature at the inlet of the first turbine is 1600 K. The first turbine produces
enough power to drive the compressor. The second turbine produces 150 kW of power.
The compressor has an isentropic efficiency of 80 % whereas the two turbines have
isentropic efficiencies of 90%. The regenerator has an efficiency of 85%. Using air
standard assumptions and also assuming constant specific heats at 300 K:
a) Draw a schematic for the cycle. Name all the components. Number each state on
the sketch.
b) Draw the T-s diagram of the cycle. Number each state.
c) Calculate the pressure ratio of each turbine stages.
d) Calculate the mass flow rate of the air.
e) Calculate the thermal efficiency of the cycle.
f) Calculate the back work ratio.
g) Calculate the second law efficiency of the cycle.