Professional Documents
Culture Documents
0_eng) ) Page 1 of 6
5. Detach the clips (A, B), and release the hooks Fastener Locations
(C) and the projections (D) by pulling the trunk
A : Clip, 1 B : Clip, 4
rear trim panel (E) up, then remove it. (Gray)
B
E
B
D
B C
B A
https://www.ecom.honda-eu.com/gma10/EMA/SM/111222115712680/html/0000000... 10/10/2012
CU1,2009( TL1XX02J26273400000NNNKDXT03(2835_3.0_eng) ) Page 2 of 6
6. Remove the tool box spacer (A). With temporary repair kit (TRK)
E A
F
C
D
B A
C
A A
https://www.ecom.honda-eu.com/gma10/EMA/SM/111222115712680/html/0000000... 10/10/2012
CU1,2009( TL1XX02J26273400000NNNKDXT03(2835_3.0_eng) ) Page 3 of 6
https://www.ecom.honda-eu.com/gma10/EMA/SM/111222115712680/html/0000000... 10/10/2012
CU1,2009( TL1XX02J26273400000NNNKDXT03(2835_3.0_eng) ) Page 4 of 6
7. Detach the clips (A, B), and release the hooks Fastener Locations
(C) and the projections (D) by pulling the trunk
A : Clip, 1 B : Clip, 4
rear trim panel (E) up, then remove it. (Gray)
D
B
E B
B
D
C
B
A
https://www.ecom.honda-eu.com/gma10/EMA/SM/111222115712680/html/0000000... 10/10/2012
CU1,2009( TL1XX02J26273400000NNNKDXT03(2835_3.0_eng) ) Page 5 of 6
8. Remove the clips (A), detach the clip (B), Fastener Locations
release each tie down hook (C) out through the
A : Clip, 4 B : Clip, 1
hole in the panel, and pull the trunk side trim
panel (D) out from under the rear bulkhead
cover (E) and the rear seat-back (F), then
remove the panel.
D
E
A
F
C
C A
B A
A
https://www.ecom.honda-eu.com/gma10/EMA/SM/111222115712680/html/0000000... 10/10/2012
CU1,2009( TL1XX02J26273400000NNNKDXT03(2835_3.0_eng) ) Page 6 of 6
https://www.ecom.honda-eu.com/gma10/EMA/SM/111222115712680/html/0000000... 10/10/2012