Professional Documents
Culture Documents
50 Macroparca
To check settings: Press SET key 50 Slash Pine Elliottii
repeatedly for 48 Pine Radiata
Wood 58 Tawa
Wood Settings: #
Change with keys. 45 Rimo Heartwood
To obtain readings: For Brazil
- Both sensor plates must be in 62 Andiroba
contact with smooth, flat surface. 80 Balsamo
- If surface is not smooth, take a few 50 Cedrella
readings and take the highest 84 Cumaru
value. 100 Gombeira
- Material must be at least as 70 Guatambu
thick as the measuring depth. 88 Ipe
80 Jacaranda
To measure: Press READ key.
76 Jatoba
Place meter on sample (for wood: in
direction of the grain) and press 100 Macaranduba
slightly down without touching 100 Tatuba
sample with your hand. 68 Tauari
36 Virola Sur.
Press HOLD to activate hold func-
tion. Press READ to resume mea- For Bamboo:
suring. Min (Max) appears with low- 0 Reference Scale 1/4” (7mm)
est (highest) moisture value, when Use Ligno-Scanner SDM for specific
moisture is too low (high) to mea- calibrations of vertical, horizontal,
sure. Meter turns itself off after 1min. strand, carbonized Bamboo.
Lignomat, 14345 NE Morris Ct. 50 Plywood made from soft-
Portland OR 97230 USA woods.
www.lignomat.com 60 OSB
E-mail: sales@lignomat.com To check settings, use a well accli-
mated sample, which should read
FAX: 503-255-1430Tel: 503-257-8957 about 7.5% See F2 in User
Inctructions.