Professional Documents
Culture Documents
Volume 5 Issue 4, May-June 2021 Available Online: www.ijtsrd.com e-ISSN: 2456 – 6470
INTRODUCTION
Cloth peg are mostly used for hanging a wet clothes for or semi-automated machine and the cost of the machine is
drying in line at overall world. It consist of two plastic peg very costly and in last year one engineering student can
and one metal round ring or also assembly in U-shaped pin developed a design a mechanism but this a hand operated
ring is assembled together. They made from plastics, wood, mechanism. The used of human effort is more and
steel etc. Clothe pegs often comes in many different designs production rate is less. So my aim is to develop a small
and different colours. It is done by workers and machines. machine to reduce their manual efforts make their easy job.
So Research and developing a mechanism. I Appropriate
mechanism inserting a round ring into the cloth peg.
CAD MODEL OF THE ASSEMBLY MACHINE
@ IJTSRD | Unique Paper ID – IJTSRD43641 | Volume – 5 | Issue – 4 | May-June 2021 Page 1467
International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
Fig: Workstation-I
@ IJTSRD | Unique Paper ID – IJTSRD43641 | Volume – 5 | Issue – 4 | May-June 2021 Page 1468
International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
ACKNOWLEDGEMENT [6] J.S. Rao, R.V. Dukkipati, Mechanism and Machine
I express my sincere gratitude to my guide Dr. A. V. Theory, Second Edition, New Age International (P)
Vanalkar (Professor), Mechanical Engineering Limited, Publishers, 1998.
Department, K.D.K. College of Engineering, Nagpur for
[7] Er. R.K. Rajput, “Strength of Materials (SI Units),
their valuable guidance, proper advice and moral support
S.Chand & Company Ltd., Ram Nagar, New Delhi-
during the course of my work on this paper.
110005, Fifth Revised Edition, 2012.
Reference
[8] A.M. Kuthe, “Computer Graphics Including CAD,
[1] https://en.wikipedia.org/wiki/Clothespin.
AutoCAD And C”, S.Chand & Company Ltd., Ram Nagar,
[2] VB Bhandari, “Design of Machine Elements”, Tata New Delhi-110055, First Edition, 2005.
McGraw Hill Education Private Limited, New Delhi,
[9] Ibrahim Zeid, R Sivasubramanian, “CAD/CAM Theory
India, Third Edition, 2012.
and Practice”, Tata McGraw Hill Education Private
[3] R.S. Khurmi, J.K. Gupta, “Theory of Machines”, S.Chand Limited, New Delhi, India, Second Edition, 2010.
Publications, Eurasia Publishing House (Pvt.) Ltd.,
[10] S.K. Hajra Choudhury, A.K. Hajra Choudhury, Nirjhar
Ram Nagar, New delhi-110055, Fourteenth Revised
Roy, Elements of Workshop Technology, Vol: 1
Edition, 2007.
Manufacturing Processes, Media Promoters &
[4] SS Rattan, “Theory of Machines”, McGraw Hill Publishers Pvt. Ltd., Mumbai-400007, 14th edition,
Education (India) Private Limited, New Delhi, India, 2010.
Fourth Edition, 2016.
[11] S.K. Hajra Choudhury, A.K. Hajra Choudhury, Nirjhar
[5] R.S. Khurmi, J.K. Gupta, A Textbook Of Machine Roy, Elements of Workshop Technology, Vol: 2
Design(S.I. Units), S.Chand Publications, Eurasia Machine Tools, Media Promoters & Publishers Pvt.
Publishing House(Pvt.) Ltd., Ram Nagar, New Delhi- Ltd., Mumbai400007, Thirteenth edition, 2014
110055,Fourteenth Edition, 2005.
@ IJTSRD | Unique Paper ID – IJTSRD43641 | Volume – 5 | Issue – 4 | May-June 2021 Page 1469