You are on page 1of 1

Faculty of Mechanical And Manufacturing Engineering

University Tun Hussien Onn Malaysia


BDA 30903 – SOLID MODELING

Practical exercise 1, Sem 2 20202021

Draw the following object using SolidWorks – sketch. All dimension in mm. Durations 60 mins.

Parallel

B
Assessment
1. Fully define, 1.5 mark
2. Complete and correct shape, 1.5 mark
3. Correct dimensions, 1.5 mark
4. Proper and tidy dimensioning, 0.5 mark Equal length and symmetrical
at line AB
Total 5.0 marks

Ck Sia 2021

You might also like