Professional Documents
Culture Documents
ANDERSON GREENWOOD
flow control
Anderson Greenwood D Series Catalog
API 526 Direct Spring Operated Pressure Relief Valve
ANDERSON GREENWOOD
flow control
In the highly specialized field of pressure valve (Series 700), direct spring operated
relief devices, no manufacturer can match valves meeting API Standard 526 and an
the diversified products and experience of extensive iron and bronze product range.
Anderson Greenwood. With more designs In addition to our well-known product
than any other worldwide manufacturer, quality, ISO 9001 certifications have been
Anderson Greenwood’s product technolo- awarded to both our Stafford, Texas and
gy solves applications from the most Manchester, England manufacturing
severe to very basic service conditions. plants, ensuring the ability to deliver prod-
Recent technology releases demonstrate ucts that meet customers' precise
significant product enhancement by our requirements well into the 21st century
globally experienced engineering staff. and beyond.
These include the high-temperature pilot
Contents
Principles of Operation
D Series ................................................................................................. 2 - 3
Product Overview
D Series (all models) ............................................................................. 5
Specifications - D Series
Valve Selector - D thru T Orifice (English Units) ................................... 8 - 21
Valve Selector - D thru T Orifice [Metric Units] ..................................... 22 - 35
ER QUALI
ST T
I
G
Y
D ' S RE
CO
MPAN
OY
NATIONAL
ACCREDITATION
LL
IS OF CERTIFICATION
O 9001 BODIES
D Series Catalog
Revised September 1998
Catalog: D-API 526 DSOPRV-US.95
The Series D/DB pressure relief valve The disc lifts and fluid flows through the
consists of a nozzle threaded into a cast valve. When pressure in the system
body housing which is flanged to a pres- returns to a safe level, the valve closes.
surized system. A disc is held against the
Just prior to reaching set point, the pres-
nozzle by a spring, which is contained in
sure relief valve leaks system fluid into
a cast bonnet. The spring is adjusted by a
the huddling chamber. The fluid now acts
compression screw to permit the calibra-
on a larger area of the disc inside the
huddling chamber (PAh), causing the
valve to experience an instantaneous
increase in the opening force. Refer to
the Figure on page 3 to see relationship
between Nozzle Area (A) and the
Huddling Chamber Area (Ah). System
pressure acting on the larger area will
suddenly open the pressure relief valve at
a rapid rate.
Technical Data
DS Series
D Series
Conventional design
ND model for nuclear service
DB Series
Balanced bellows design
NDB model for nuclear service
DS Series
Open bonnet for steam service
ASME VIII only
DO Series
Conventional design, soft seat
DBO Series
Balanced bellows design, soft seat
Features and Benefits • In the soft seat option, the springload 2. Hastelloy® is a registered trademark of
is applied directly to the metal seat, Haynes International.
• Single trim for all services provides full
capacity at 10% overpressure for liq- increasing service life of the O-ring. 3. Pressure ratings on pages 8 - 35 are based on
The soft seat disc retains the metal A216-WCB materials. Consult ANSI B16.34 for
uid, steam or vapor applications pressure ratings of other materials (316,
without additional parts. seat on its reversible side. Monel®, Hastelloy®, WC6, etc.)
• Springs within a pressure class and • Lift levers, test gags, steam jackets
orifice size are designed with a fixed and other accessories available
I.D. to eliminate the need to custom- • Monel®, Hastelloy® C and Duplex SS
machine steps for each spring. materials for corrosive applications
• Identical nozzle ring for each orifice • NACE MR-0175 compliance
size regardless of pressure range or
seat design reduces parts variations, • Cryogenic materials available
except in DB Series F orifice.
• Oxygen cleaning (LOX, GOX) avail-
able.
Product Overview
D Series
Model Number Guide
D 1 0 D S1
Valve Type
D - Conventional Valve, ASME VIII, Enclosed Spring
ND - Conventional Valve, ASME III, Enclosed Spring1
DB - Balanced Bellows, ASME VIII, Enclosed Spring
NDB - Balanced Bellows, ASME III, Enclosed Spring1
DO - O-ring Seat, Conventional ASME VIII2
DBO - O-ring Seat, Balanced Bellows, ASME VIII2
DS - Open Yoke, ASME VIII, Exposed Spring3
Inlet/Outlet Connections
1 - ANSI 150 x ANSI 150 5 - ANSI 600 x ANSI 1504
2 - ANSI 300 (285 psig maximum) 7 - ANSI 900 x ANSI 150 or ANSI 900 x ANSI 300
[19.65 barg] x ANSI 150 8 - ANSI 1500 x ANSI 300
3 - ANSI 300 x ANSI 150 9 - ANSI 2500 x ANSI 300
Temperature Range
D/DB/DO/DBO DS
0 - -20°F to +450°F [-29°C to +232°C] 5 - -20°F to +750°F [-29°C to +399°C]
2 - +451°F to +800°F [+232°C to +427°C] 6 - +751°F to +800°F [+399°C to +427°C]
3 - +800°F to +1000°F [+427°C to +538°C] 7 - +801°F to +1000°F [+427°C to +538°C]
M 20 A K S 0200 /SPL
Seat Material
A - Aflas K - Kalrez
B - BUNA-N M - Metal
C - Chemraz S - Silicone
E - EPR V - Viton®
Design Revision
— - For DB, DBO (D, E orifice only) and all Nuclear valves
A - For all other model, sizes
Service
D - ASME III Liquids L - ASME VIII Steam (limited to 2900 psig [200 barg])
E - ASME III Gas, Vapors M - Non Code Liquid
J - ASME VIII Liquids N - Non Code Gas, Vapor
K - ASME VIII Gas, Vapors P - Non Code Steam
Spring Material
B - Inconel® X750 (NACE standard for D, DO) P - Steel, Aluminized (NACE standard for models DB, DBO)
F - High Temp5 (standard for temperature range ‘2’ and ‘3’) R - Monel®
G - 316 SS S - Steel, Aluminum Coated (standard for temperature
K - Hastelloy® C range ‘0’)
Set Pressure
0050 - 50 psig [3.45 barg]
0200 - 200 psig [13.79 barg]
1500 - 1500 psig [103.43 barg]
Specials
/SPL
Notes Examples
D-33HS122ALF0500
1. Nuclear models ND and NDB not certified for 4. For 8T10, Inlet/Outlet Rating Code ‘5’ is an
ASME III steam service. ANSI 300 x ANSI 150, not ANSI 600 x 150. NDB10FS420-EG0060
2. The standard soft seat material in Models DO, 5. Tungsten Alloy or Inconel® X750.
DBO is Viton®. Viton® is a registered trade- DB10EH124-KS0120/SPL
mark of the E.I. duPont de Nemours Company.
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard (psig) (psig @ 100°F) (inches) (lb)
(inches) Inlet Outlet 100°F 450°F 800°F 1000°F Conventional Bellows A B Max. C
1x2 D-10D DB10D 150 RF or RJ 150 RF 285 185 285 230 41/8 41/2 20 40
1x2 D-12D DB12D 150 RF or RJ 150 RF 185 80 285 230 41/8 41/2 20 40
1x2 D-20D DB20D 300 RF or RJ 150 RF 285 285 285 230 41/8 41/2 20 43
1x2 D-22D DB22D 300 RF or RJ 150 RF 285 285 285 230 41/8 41/2 20 43
1x2 D-30D DB30D 300 RF or RJ 150 RF 740 615 285 230 41/8 41/2 20 45
1x2 D-32D DB32D 300 RF or RJ 150 RF 615 410 285 230 41/8 41/2 20 45
1x2 D-33D DB33D 300 RF or RJ 150 RF 510 225 285 230 41/8 41/2 20 45
1x2 D-50D DB50D 600 RF or RJ 150 RF 1480 1235 285 230 41/8 41/2 20 45
1x2 D-52D DB52D 600 RF or RJ 150 RF 1235 825 285 230 41/8 41/2 20 45
1x2 D-53D DB53D 600 RF or RJ 150 RF 1015 445 285 230 41/8 41/2 20 45
11/2 x2 D-70D DB70D 900 RF or RJ 300 RF 2220 1845 600 500 41/8 51/2 20 58
11/2 x 2 D-72D DB72D 900 RF or RJ 300 RF 1845 1235 600 500 41/8 51/2 20 58
11/2 x 2 D-73D DB73D 900 RF or RJ 300 RF 1525 670 600 500 41/8 51/2 20 58
11/2 x2 D-80D DB80D 1500 RF or RJ 300 RF 3705 3080 600 500 41/8 51/2 20 58
11/2 x 2 D-82D DB82D 1500 RF or RJ 300 RF 3080 2060 600 500 41/8 51/2 20 58
11/2 x 2 D-83D DB83D 1500 RF or RJ 300 RF 2540 1115 600 500 41/8 51/2 20 58
11/2 x 21/2 D-90D DB90D 2500 RF or RJ 300 RF 6000 5135 740 500 51/2 61/2 221/2 80
11/2 x 21/2 D-92D DB92D 2500 RF or RJ 300 RF 5135 3430 740 500 51/2 61/2 221/2 80
11/2 x 21/2 D-93D DB93D 2500 RF or RJ 300 RF 4230 1860 740 500 51/2 61/2 221/2 80
Notes
1. Valves set under 15 psig are not ASME code 3. Valve capacities are listed in the PRV Capacity
stamped. Tables Catalog for air, steam, and water C
±1/16-inch.
B
Carbon Steel
400
D-20E
D-20E
Body-Bonnet 300
and Spring D-10E D-30E D-50E D-70E D-80E D-90E
D-10E D-30E D-50E D-70E D-80E D-90E
200
100
-20
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2500 3000 3500 4000 4500 5000 5500 6000
Set pressure psig1
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard (psig) (psig @ 100°F) (inches) (lb)
(inches) Inlet Outlet 100°F 450°F 800°F 1000°F Conventional Bellows A B Max. C
1x2 D-10E DB10E 150 RF or RJ 150 RF 285 185 285 230 41/8 41/2 20 40
1x2 D-12E DB12E 150 RF or RJ 150 RF 185 80 285 230 41/8 41/2 20 40
1x2 D-20E DB20E 300 RF or RJ 150 RF 285 285 285 230 41/8 41/2 20 43
1x2 D-22E DB22E 300 RF or RJ 150 RF 285 285 285 230 41/8 41/2 20 43
1x2 D-30E DB30E 300 RF or RJ 150 RF 740 615 285 230 41/8 41/2 20 45
1x2 D-32E DB32E 300 RF or RJ 150 RF 615 410 285 230 41/8 41/2 20 45
1x2 D-33E DB33E 300 RF or RJ 150 RF 510 225 285 230 41/8 41/2 20 45
1x2 D-50E DB50E 600 RF or RJ 150 RF 1480 1235 285 230 41/8 41/2 20 45
1x2 D-52E DB52E 600 RF or RJ 150 RF 1235 825 285 230 41/8 41/2 20 45
1x2 D-53E DB53E 600 RF or RJ 150 RF 1015 445 285 230 41/8 41/2 20 45
11/2 x2 D-70E DB70E 900 RF or RJ 300 RF 2220 1845 600 500 41/8 51/2 20 58
11/2 x 2 D-72E DB72E 900 RF or RJ 300 RF 1845 1235 600 500 41/8 51/2 20 58
11/2 x 2 D-73E DB73E 900 RF or RJ 300 RF 1525 670 600 500 41/8 51/2 20 58
11/2 x2 D-80E DB80E 1500 RF or RJ 300 RF 3705 3080 600 500 41/8 51/2 20 58
11/2 x 2 D-82E DB82E 1500 RF or RJ 300 RF 3080 2060 600 500 41/8 51/2 20 58
11/2 x 2 D-83E DB83E 1500 RF or RJ 300 RF 2540 1115 600 500 41/8 51/2 20 58
11/2 x 21/2 D-90E DB90E 2500 RF or RJ 300 RF 6000 5135 740 500 51/2 61/2 221/2 80
11/2 x 21/2 D-92E DB92E 2500 RF or RJ 300 RF 5135 3430 740 500 51/2 61/2 221/2 80
11/2 x 21/2 D-93E DB93E 2500 RF or RJ 300 RF 4230 1860 740 500 51/2 61/2 221/2 80
Notes
1. Valves set under 15 psig are not ASME code 3. Valve capacities are listed in the PRV Capacity
stamped. Tables Catalog for air, steam, and water.
C
Carbon Steel
400
D-20F
D-20F
Body-Bonnet 300
and Spring D-10F D-30F D-50F D-70F D-80F D-90F
D-10F D-30F D-50F D-70F D-80F D-90F
200
100
-20
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2500 3000 3500 4000 4500 5000
Set pressure psig1
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard (psig) (psig @ 100°F) (inches) (lb)
(inches) Inlet Outlet 100°F 450°F 800°F 1000°F Conventional Bellows A B Max. C
11/2 x 2 D-10F DB10F 150 RF or RJ 150 RF 285 185 285 230 47/8 43/4 203/4 43
11/2 x 2 D-12F DB12F 150 RF or RJ 150 RF 185 80 285 230 47/8 43/4 203/4 43
11/2 x 2 D-20F DB20F 300 RF or RJ 150 RF 285 285 285 230 47/8 43/4 203/4 47
11/2 x 2 D-22F DB22F 300 RF or RJ 150 RF 285 285 285 230 47/8 43/4 203/4 47
11/2 x 2 D-30F DB30F 300 RF or RJ 150 RF 740 615 285 230 47/8 6 203/4 50
11/2 x 2 D-32F DB32F 300 RF or RJ 150 RF 615 410 285 230 47/8 6 203/4 50
11/2 x 2 D-33F DB33F 300 RF or RJ 150 RF 510 225 285 230 47/8 6 203/4 50
11/2 x 2 D-50F DB50F 600 RF or RJ 150 RF 1480 1235 285 230 47/8 6 203/4 50
11/2 x 2 D-52F DB52F 600 RF or RJ 150 RF 1235 825 285 230 47/8 6 203/4 50
11/2 x 2 D-53F DB53F 600 RF or RJ 150 RF 1015 445 285 230 47/8 6 203/4 50
11/2 x 21/2 D-70F DB70F 900 RF or RJ 300 RF 2220 1845 740 500 47/8 6 203/8 63
11/2 x 21/2 D-72F DB72F 900 RF or RJ 300 RF 1845 1235 740 500 47/8 6 203/8 63
11/2 x 21/2 D-73F DB73F 900 RF or RJ 300 RF 1525 670 740 500 47/8 6 203/8 63
11/2 x 21/2 D-80F DB80F 1500 RF or RJ 300 RF 3705 3080 740 500 47/8 6 213/4 68
11/2 x 21/2 D-82F DB82F 1500 RF or RJ 300 RF 3080 2060 740 500 47/8 6 213/4 68
11/2 x 21/2 D-83F DB83F 1500 RF or RJ 300 RF 2540 1115 740 500 47/8 6 203/4 63
11/2 x 21/2D-90F DB90F 2500 RF or RJ 300 RF 5000 5000 740 500 51/2 61/2 221/2 80
11/2 x 21/2 D-92F DB92F 2500 RF or RJ 300 RF 5000 3430 740 500 51/2 61/2 221/2 80
11/2 x 21/2 D-93F DB93F 2500 RF or RJ 300 RF 4230 1860 740 500 51/2 61/2 221/2 80
Notes
1. Valves set under 15 psig are not ASME code 3. Valve capacities are listed in the PRV Capacity
stamped. Tables Catalog for air, steam, and water.
C
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard (psig) (psig @ 100°F) (inches) (lb)
(inches) Inlet Outlet 100°F 450°F 800°F 1000°F Conventional Bellows A B Max. C
11/2 x 21/2 D-10G DB10G 150 RF or RJ 150 RF 285 185 285 230 47/8 43/4 203/4 46
11/2 x 21/2 D-12G DB12G 150 RF or RJ 150 RF 185 80 285 230 47/8 43/4 203/4 46
11/2 x 21/2 D-20G DB20G 300 RF or RJ 150 RF 285 285 285 230 47/8 43/4 203/4 50
11/2 x 21/2 D-22G DB22G 300 RF or RJ 150 RF 285 285 285 230 47/8 43/4 203/4 50
11/2 x 21/2 D-30G DB30G 300 RF or RJ 150 RF 740 615 285 230 47/8 6 203/4 55
11/2 x 21/2 D-32G DB32G 300 RF or RJ 150 RF 615 410 285 230 47/8 6 203/4 55
11/2 x 21/2 D-33G DB33G 300 RF or RJ 150 RF 510 225 285 230 47/8 6 203/4 55
11/2 x 21/2 D-50G DB50G 600 RF or RJ 150 RF 1480 1235 285 230 47/8 6 203/4 55
11/2 x 21/2 D-52G DB52G 600 RF or RJ 150 RF 1235 825 285 230 47/8 6 203/4 55
11/2 x 21/2 D-53G DB53G 600 RF or RJ 150 RF 1015 445 285 230 47/8 6 203/4 55
11/2 x 21/2 D-70G DB70G 900 RF or RJ 300 RF 2220 1845 740 470 47/8 6 213/4 67
11/2 x 21/2 D-72G DB72G 900 RF or RJ 300 RF 1845 1235 740 470 47/8 6 213/4 67
11/2 x 21/2 D-73G DB73G 900 RF or RJ 300 RF 1525 670 740 470 47/8 6 213/4 63
2x 3 D-80G DB80G 1500 RF or RJ 300 RF 3705 3080 740 470 61/8 63/4 251/2 140
2x 3 D-82G DB82G 1500 RF or RJ 300 RF 3080 2060 740 470 61/8 63/4 251/2 140
2x 3 D-83G DB83G 1500 RF or RJ 300 RF 2540 1115 740 470 61/8 63/4 251/2 140
2x3 D-90G DB90G 2500 RF or RJ 300 RF 3705 3705 740 470 61/8 63/4 251/2 155
2x3 D-92G DB92G 2500 RF or RJ 300 RF 3705 3430 740 470 61/8 63/4 251/2 155
2x3 D-93G DB93G 2500 RF or RJ 300 RF 3705 1860 740 470 61/8 63/4 251/2 155
Notes
1. Valves set under 15 psig are not ASME code 3. Valve capacities are listed in the PRV Capacity
stamped. Tables Catalog for air, steam, and water.
C
2. Maximum A and B dimensions ±1/16-inch.
Carbon Steel
400
Body-Bonnet
D-20H
D-20H
and Spring 300
D-10H
D-10H D-30H
D-30H D-50H
D-50H D-70H
D-70H D-80H
D-80H
200
100
-20
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800
Set pressure psig1
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard (psig) (psig @ 100°F) (inches) (lb)
(inches) Inlet Outlet 100°F 450°F 800°F 1000°F Conventional Bellows A B Max. C
11/2 x 3 D-10H DB10H 150 RF or RJ 150 RF 285 185 285 230 51/8 47/8 21 50
11/2 x 3 D-12H DB12H 150 RF or RJ 150 RF 185 80 285 230 51/8 47/8 21 50
11/2 x 3 D-20H DB20H 300 RF or RJ 150 RF 285 285 285 230 51/8 47/8 21 54
11/2 x 3 D-22H DB22H 300 RF or RJ 150 RF 285 285 285 230 51/8 47/8 21 54
2x3 D-30H DB30H 300 RF or RJ 150 RF 740 615 285 230 51/8 47/8 21 58
2x3 D-32H DB32H 300 RF or RJ 150 RF 615 410 285 230 51/8 47/8 21 58
2x3 D-33H DB33H 300 RF or RJ 150 RF 510 225 285 230 51/8 47/8 21 58
2x3 D-50H DB50H 600 RF or RJ 150 RF 1480 1235 285 230 61/16 63/8 251/2 120
2x3 D-52H DB52H 600 RF or RJ 150 RF 1235 825 285 230 61/16 63/8 251/2 120
2x3 D-53H DB53H 600 RF or RJ 150 RF 1015 445 285 230 51/8 47/8 21 60
2x3 D-70H DB70H 900 RF or RJ 150 RF 2220 1845 285 230 61/16 63/8 251/2 135
2x3 D-72H DB72H 900 RF or RJ 150 RF 1845 1235 285 230 61/16 63/8 251/2 135
2x3 D-73H DB73H 900 RF or RJ 150 RF 1525 670 285 230 61/16 63/8 251/2 135
2x3 D-80H DB80H 1500 RF or RJ 300 RF 2750 2750 740 415 61/16 63/8 251/2 140
2x3 D-82H DB82H 1500 RF or RJ 300 RF 2750 2060 740 415 61/16 63/8 251/2 140
2x3 D-83H DB83H 1500 RF or RJ 300 RF 2540 1115 740 415 61/16 63/8 251/2 140
Notes
1. Valves set under 15 psig are not ASME code 3. Valve capacities are listed in the PRV Capacity
stamped. Tables Catalog for air, steam, and water. C
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard (psig) (psig @ 100°F) (inches) (lb)
(inches) Inlet Outlet 100°F 450°F 800°F 1000°F Conventional Bellows A B Max. C
2x3 D-10J DB10J 150 RF or RJ 150 RF 285 185 285 230 53/8 47/8 213/4 58
2x3 D-12J DB12J 150 RF or RJ 150 RF 185 80 285 230 53/8 47/8 213/4 58
2x3 D-20J DB20J 300 RF or RJ 150 RF 285 285 285 230 53/8 47/8 213/4 62
2x3 D-22J DB22J 300 RF or RJ 150 RF 285 285 285 230 53/8 47/8 213/4 62
21/2 x 4 D-30J DB30J 300 RF or RJ 150 RF 740 615 285 230 53/8 55/8 223/4 76
21/2 x 4 D-32J DB32J 300 RF or RJ 150 RF 615 410 285 230 53/8 55/8 223/4 76
21/2 x 4 D-33J DB33J 300 RF or RJ 150 RF 510 225 285 230 53/8 55/8 223/4 76
21/2 x 4 D-50J DB50J 600 RF or RJ 150 RF 1480 1235 285 230 61/8 63/4 251/2 130
21/2 x 4 D-52J DB52J 600 RF or RJ 150 RF 1235 825 285 230 61/8 63/4 251/2 130
21/2 x 4 D-53J DB53J 600 RF or RJ 150 RF 815 445 285 230 53/8 55/8 223/4 80
3x4 D-70J DB70J 900 RF or RJ 150 RF 2220 1845 285 230 71/4 71/8 301/2 205
3x4 D-72J DB72J 900 RF or RJ 150 RF 1845 1235 285 230 71/4 71/8 301/2 205
21/2 x 4 D-73J DB73J 900 RF or RJ 150 RF 1525 670 285 230 61/8 63/4 251/2 155
3x4 D-80J DB80J 1500 RF or RJ 300 RF 2700 2700 600 230 71/4 71/8 301/2 235
3x4 D-82J DB82J 1500 RF or RJ 300 RF 2700 2060 600 230 71/4 71/8 301/2 235
3x4 D-83J DB83J 1500 RF or RJ 300 RF 2540 1115 600 230 71/4 71/8 301/2 235
Notes
1. Valves set under 15 psig are not ASME code 3. Valve capacities are listed in the PRV Capacity
stamped. Tables Catalog for air, steam, and water.
C
2. Maximum A and B dimensions ±1/16-inch.
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard (psig) (psig @ 100°F) (inches) (lb)
(inches) Inlet Outlet 100°F 450°F 800°F 1000°F Conventional Bellows A B Max. C
3x4 D-10K DB10K 150 RF or RJ 150 RF 285 185 285 150 61/8 63/8 261/2 120
3x4 D-12K DB12K 150 RF or RJ 150 RF 185 80 285 150 61/8 63/8 261/2 120
3x4 D-20K DB20K 300 RF or RJ 150 RF 285 285 285 150 61/8 63/8 261/2 130
3x4 D-22K DB22K 300 RF or RJ 150 RF 285 285 285 150 61/8 63/8 261/2 130
3x4 D-30K DB30K 300 RF or RJ 150 RF 740 615 285 150 61/8 63/8 261/2 135
3x4 D-32K DB32K 300 RF or RJ 150 RF 615 410 285 150 61/8 63/8 261/2 135
3x4 D-33K DB33K 300 RF or RJ 150 RF 510 225 285 150 61/8 63/8 261/2 135
3x4 D-50K DB50K 600 RF or RJ 150 RF 1480 1235 285 200 71/4 71/8 301/2 185
3x4 D-52K DB52K 600 RF or RJ 150 RF 1235 825 285 200 71/4 71/8 301/2 185
3x4 D-53K DB53K 600 RF or RJ 150 RF 1015 445 285 200 61/8 63/8 261/2 135
3x6 D-70K DB70K 900 RF or RJ 150 RF 2220 1845 600 285 713/16 81/2 31 215
3x6 D-72K DB72K 900 RF or RJ 150 RF 1845 1235 600 285 713/16 81/2 31 215
3x4 D-73K DB73K 900 RF or RJ 150 RF 1525 670 600 285 71/4 71/8 301/2 200
3x6 D-80K DB80K 1500 RF or RJ 300 RF 2220 2220 600 200 73/4 81/2 31 255
3x6 D-82K DB82K 1500 RF or RJ 300 RF 2220 2060 600 200 73/4 81/2 31 255
3x6 D-83K DB83K 1500 RF or RJ 300 RF 2040 1115 600 200 73/4 81/2 31 255
Notes
1. Valves set under 15 psig are not ASME code 3. Valve capacities are listed in the PRV Capacity
stamped. Tables Catalog for air, steam, and water.
C
2. Maximum A and B dimensions ±1/16-inch.
Alloy Steel
Body-Spring
1000
Bonnet 900 D-83L
D-83L
D-33L
D-33L D-53L
D-53L D-73L
D-73L
800
D-82L
D-82L
Carbon Steel 700
Body-Bonnet D-22L
D-22L D-32L
D-32L D-52L
D-52L D-72L
D-72L
Alloy Steel 600
Spring D-12L
D-12L
500
400
Carbon Steel D-20L
D-20L
Body-Bonnet 300 D-70L
D-70L
and Spring D-10L
D-10L D-30L
D-30L D-50L
D-50L
200
100
-20
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
0 200 400 600 800 1000 1200 1400 1650
Set pressure psig1
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard (psig) (psig @ 100°F) (inches) (lb)
(inches) Inlet Outlet 100°F 450°F 800°F 1000°F Conventional Bellows A B Max. C
3x4 D-10L DB10L 150 RF or RJ 150 RF 285 185 285 100 61/8 61/2 261/2 130
3x4 D-12L DB12L 150 RF or RJ 150 RF 185 80 285 100 61/8 61/2 261/2 130
3x4 D-20L DB20L 300 RF or RJ 150 RF 285 285 285 100 61/8 61/2 261/2 140
3x4 D-22L DB22L 300 RF or RJ 150 RF 285 285 285 100 61/8 61/2 261/2 140
4x6 D-30L DB30L 300 RF or RJ 150 RF 740 615 285 170 71/16 71/8 301/4 200
4x6 D-32L DB32L 300 RF or RJ 150 RF 615 410 285 170 71/16 71/8 301/4 200
4x6 D-33L DB33L 300 RF or RJ 150 RF 510 225 285 170 71/16 71/8 301/4 200
4x6 D-50L DB50L 600 RF or RJ 150 RF 1000 1000 285 170 71/16 8 301/4 220
4x6 D-52L DB52L 600 RF or RJ 150 RF 1000 825 285 170 71/16 8 301/4 220
4x6 D-53L DB53L 600 RF or RJ 150 RF 1000 445 285 170 71/16 8 301/4 220
4x6 D-70L DB70L 900 RF or RJ 150 RF 1650 1650 285 170 73/4 83/4 341/4 250
4x6 D-72L DB72L 900 RF or RJ 150 RF 1650 1235 285 170 73/4 83/4 341/4 250
4x6 D-73L DB73L 900 RF or RJ 150 RF 1525 670 285 170 73/4 83/4 341/4 250
4x6 D-82L DB82L 1500 RF or RJ 150 RF 1650 1500 285 170 73/4 83/4 341/4 270
4x6 D-83L DB83L 1500 RF or RJ 150 RF 1650 1115 285 170 73/4 83/4 341/4 270
Notes
1. Valves set under 15 psig are not ASME code 3. Valve capacities are listed in the PRV Capacity
stamped. Tables Catalog for air, steam, and water. C
Carbon Steel
400
Body-Bonnet
D-20M
D-20M
and Spring
300
D-10M
D-10M D-30M
D-30M D-50M
D-50M
200
100
-20
▲ ▲ ▲ ▲ ▲ ▲ ▲
0 200 400 600 800 1000 1200
Set pressure psig1
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard (psig) (psig @ 100°F) (inches) (lb)
(inches) Inlet Outlet 100°F 450°F 800°F 1000°F Conventional Bellows A B Max. C
4x6 D-10M DB10M 150 RF or RJ 150 RF 285 185 285 80 7 71/4 301/4 190
4x6 D-12M DB12M 150 RF or RJ 150 RF 185 80 285 80 7 71/4 301/4 190
4x6 D-20M DB20M 300 RF or RJ 150 RF 285 285 285 80 7 71/4 301/4 200
4x6 D-22M DB22M 300 RF or RJ 150 RF 285 285 285 80 7 71/4 301/4 200
4x6 D-30M DB30M 300 RF or RJ 150 RF 740 615 285 160 7 71/4 301/4 205
4x6 D-32M DB32M 300 RF or RJ 150 RF 615 410 285 160 7 71/4 301/4 205
4x6 D-33M DB33M 300 RF or RJ 150 RF 510 225 285 160 7 71/4 301/4 205
4x6 D-50M DB50M 600 RF or RJ 150 RF 1200 1200 285 160 7 8 333/4 230
4x6 D-52M DB52M 600 RF or RJ 150 RF 1200 825 285 160 7 8 333/4 230
4x6 D-53M DB53M 600 RF or RJ 150 RF 1015 445 285 160 7 8 333/4 230
4x6 D-72M DB72M 900 RF or RJ 150 RF 1200 1200 285 160 7 3/ 4 83/4 341/4 260
4x6 D-73M DB73M 900 RF or RJ 150 RF 1200 670 285 160 7 3/ 4 83/4 341/4 260
Notes
1. Valves set under 15 psig are not ASME code 3. Valve capacities are listed in the PRV Capacity
stamped. Tables Catalog for air, steam, and water.
C
Alloy Steel
Body-Spring
1000
Bonnet
900 D-73N
D-73N
D-33N
D-33N D-53N
D-53N
800
D-72N
D-72N
Carbon Steel 700
Body-Bonnet D-22N
D-22N D-32N
D-32N D-52N
D-52N
Alloy Steel
Spring
600
D-12N
D-12N
500
Carbon Steel
400
Body-Bonnet
D-20N
D-20N
and Spring 300
D-10N
D-10N D-30N
D-30N D-50N
D-50N
200
100
-20
▲ ▲ ▲ ▲ ▲ ▲ ▲
0 200 400 600 800 1000 1200
Set pressure psig1
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard (psig) (psig @ 100°F) (inches) (lb)
(inches) Inlet Outlet 100°F 450°F 800°F 1000°F Conventional Bellows A B Max. C
4x6 D-10N DB10N 150 RF or RJ 150 RF 285 185 285 80 73/4 81/4 311/2 200
4x6 D-12N DB12N 150 RF or RJ 150 RF 185 80 285 80 73/4 81/4 311/2 200
4x6 D-20N DB20N 300 RF or RJ 150 RF 285 285 285 80 73/4 81/4 311/2 200
4x6 D-22N DB22N 300 RF or RJ 150 RF 285 285 285 80 73/4 81/4 311/2 200
4x6 D-30N DB30N 300 RF or RJ 150 RF 740 615 285 160 73/4 81/4 35 230
4x6 D-32N DB32N 300 RF or RJ 150 RF 615 410 285 160 73/4 81/4 35 230
4x6 D-33N DB33N 300 RF or RJ 150 RF 510 225 285 160 73/4 81/4 311/2 215
4x6 D-50N DB50N 600 RF or RJ 150 RF 1050 1050 285 160 73/4 83/4 35 250
4x6 D-52N DB52N 600 RF or RJ 150 RF 1050 825 285 160 73/4 83/4 35 250
4x6 D-53N DB53N 600 RF or RJ 150 RF 1015 445 285 160 73/4 83/4 35 250
4x6 D-72N DB72N 900 RF or RJ 150 RF 1050 1000 285 160 73/4 83/4 35 270
4x6 D-73N DB73N 900 RF or RJ 150 RF 1050 670 285 160 73/4 83/4 35 270
Notes
1. Valves set under 15 psig are not ASME code 3. Valve capacities are listed in the PRV Capacity
stamped. Tables Catalog for air, steam, and water.
C
2. Maximum A and B dimensions ±1/16-inch.
Alloy Steel
1000
Body-Spring D-73P
D-73P
Bonnet 900
D-33P
D-33P D-53P
D-53P
800
D-72P
D-72P
Carbon Steel
700
Body-Bonnet
D-22P
D-22P D-32P
D-32P D-52P
D-52P
Alloy Steel
600
Spring
D-12P
D-12P
500
400
Carbon Steel D-20P
D-20P
Body-Bonnet 300
and Spring D-10P
D-10P D-50P
D-50P
200
D-30P
D-30P
100
-20
▲ ▲ ▲ ▲ ▲ ▲ ▲
0 200 400 600 800 1000 1200
Set pressure psig1
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard (psig) (psig @ 100°F) (inches) (lb)
(inches) Inlet Outlet 100°F 450°F 800°F 1000°F Conventional Bellows A B Max. C
4x6 D-10P DB10P 150 RF or RJ 150 RF 285 185 285 80 71/8 9 307/8 210
4x6 D-12P DB12P 150 RF or RJ 150 RF 185 80 285 80 71/8 9 307/8 210
4x6 D-20P DB20P 300 RF or RJ 150 RF 285 285 285 80 71/8 9 307/8 220
4x6 D-22P DB22P 300 RF or RJ 150 RF 285 285 285 80 71/8 9 307/8 220
4x6 D-30P DB30P 300 RF or RJ 150 RF 525 525 285 150 87/8 10 421/2 330
4x6 D-32P DB32P 300 RF or RJ 150 RF 525 410 285 150 87/8 10 421/2 330
4x6 D-33P DB33P 300 RF or RJ 150 RF 510 225 285 150 87/8 10 421/2 330
4x6 D-50P DB50P 600 RF or RJ 150 RF 1000 1000 285 150 87/8 10 421/2 360
4x6 D-52P DB52P 600 RF or RJ 150 RF 1000 825 285 150 87/8 10 421/2 360
4x6 D-53P DB53P 600 RF or RJ 150 RF 1000 445 285 150 87/8 10 421/2 360
4x6 D-72P DB72P 900 RF or RJ 150 RF 1000 1000 285 150 87/8 10 421/2 380
4x6 D-73P DB73P 900 RF or RJ 150 RF 1000 670 285 150 87/8 10 421/2 380
Notes
1. Valves set under 15 psig are not ASME code 3. Valve capacities are listed in the PRV Capacity
stamped. Tables Catalog for air, steam, and water.
C
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard (psig) (psig @ 100°F) (inches) (lb)
(inches) Inlet Outlet 100°F 450°F 800°F 1000°F Conventional Bellows A B Max. C
6x8 D-10Q DB10Q 150 RF or RJ 150 RF 165 165 115 70 97/16 91/2 451/2 480
6x8 D-12Q DB12Q 150 RF or RJ 150 RF 165 80 115 70 97/16 91/2 451/2 480
6x8 D-20Q DB20Q 300 RF or RJ 150 RF 165 165 115 70 97/16 91/2 451/2 500
6x8 D-22Q DB22Q 300 RF or RJ 150 RF 165 165 115 70 97/16 91/2 451/2 500
6x8 D-30Q DB30Q 300 RF or RJ 150 RF 300 300 115 115 97/16 91/2 451/2 520
6x8 D-32Q DB32Q 300 RF or RJ 150 RF 300 300 115 115 97/16 91/2 451/2 520
6x8 D-33Q DB33Q 300 RF or RJ 150 RF 165 165 115 115 97/16 91/2 451/2 520
6x8 D-50Q DB50Q 600 RF or RJ 150 RF 600 600 115 115 97/16 91/2 491/2 630
6x8 D-52Q DB52Q 600 RF or RJ 150 RF 600 600 115 115 97/16 91/2 491/2 630
6x8 D-53Q DB53Q 600 RF or RJ 150 RF 600 445 115 115 97/16 91/2 491/2 630
Notes
1. Valves set under 15 psig are not ASME code 3. Valve capacities are listed in the PRV Capacity
stamped. Tables Catalog for air, steam, and water.
C
1000
Alloy Steel
Body-Spring 900 D-33R
D-33R D-53R
D-53R
Bonnet
800
700
Carbon Steel D-52R
D-52R
Body-Bonnet 600 D-12R
D-12R D-32R
D-32R
Alloy Steel D-22R
D-22R
Spring 500
400
Carbon Steel 300
Body-Bonnet D-10R D-30R D-50R
and Spring
D-10R D-30R D-50R
200 D-20R
D-20R
100
-20
▲ ▲ ▲ ▲
0 100 200 300
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard (psig) (psig @ 100°F) (inches) (lb)
(inches) Inlet Outlet 100°F 450°F 800°F 1000°F Conventional Bellows A B Max. C
6x8 D-10R DB10R 150 RF or RJ 150 RF 100 100 60 60 97/16 91/2 451/2 500
6x8 D-12R DB12R 150 RF or RJ 150 RF 100 80 60 60 97/16 91/2 451/2 500
6x8 D-20R DB20R 300 RF or RJ 150 RF 100 100 60 60 97/16 91/2 451/2 520
6x8 D-22R DB22R 300 RF or RJ 150 RF 100 100 60 60 97/16 91/2 451/2 520
6 x 10 D-30R DB30R 300 RF or RJ 150 RF 230 230 100 100 97/16 101/2 491/2 620
6 x 10 D-32R DB32R 300 RF or RJ 150 RF 230 230 100 100 97/16 101/2 491/2 620
6x8 D-33R DB33R 300 RF or RJ 150 RF 100 100 60 60 97/16 91/2 451/2 520
6 x 10 D-50R DB50R 600 RF or RJ 150 RF 300 300 100 100 97/16 101/2 491/2 660
6 x 10 D-52R DB52R 600 RF or RJ 150 RF 300 300 100 100 97/16 101/2 491/2 660
6 x 10 D-53R DB53R 600 RF or RJ 150 RF 300 300 100 100 97/16 101/2 491/2 660
Notes
1. Valves set under 15 psig are not ASME code 3. Valve capacities are listed in the PRV Capacity
stamped. Tables Catalog for air, steam, and water.
C
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard (psig) (psig @ 100°F) (inches) (lb)
(inches) Inlet Outlet 100°F 450°F 800°F 1000°F Conventional Bellows A B Max. C
8 x 10 D-50T DB50T 300 RF or RJ 150 RF 300 300 100 60 107/8 11 543/4 830
8 x 10 D-52T DB52T 300 RF or RJ 150 RF 300 300 100 60 107/8 11 543/4 830
8 x 10 D-53T DB53T 300 RF or RJ 150 RF 300 225 100 60 107/8 11 543/4 830
Notes
1. Valves set under 15 psig are not ASME code 3. Valve capacities are listed in the PRV Capacity
stamped. Tables Catalog for air, steam, and water.
C
2. Maximum A and B dimensions ±1/8-inch. 4. DB50T, DB52T and DB53T do not meet API
526 back pressure requirement of 100 psig.
A
0 14 28 41 55 69 83 97 110 124 138 172 207 241 276 310 345 379 414
Set pressure barg1
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard [barg] [barg @ 38°C] [mm] [kg]
[mm] Inlet Outlet 38°C 232°C 427°C 538°C Conventional Bellows A B Max. C
25 x 50 D-10D DB10D 150 RF or RJ 150 RF 19.7 12.8 19.7 15.9 104 114 508 18.1
25 x 50 D-12D DB12D 150 RF or RJ 150 RF 12.8 5.5 19.7 15.9 104 114 508 18.1
25 x 50 D-20D DB20D 300 RF or RJ 150 RF 19.7 19.7 19.7 15.9 104 114 508 19.5
25 x 50 D-22D DB22D 300 RF or RJ 150 RF 19.7 19.7 19.7 15.9 104 114 508 19.5
25 x 50 D-30D DB30D 300 RF or RJ 150 RF 51.0 42.4 19.7 15.9 104 114 508 20.4
25 x 50 D-32D DB32D 300 RF or RJ 150 RF 42.4 28.3 19.7 15.9 104 114 508 20.4
25 x 50 D-33D DB33D 300 RF or RJ 150 RF 35.2 15.5 19.7 15.9 104 114 508 20.4
25 x 50 D-50D DB50D 600 RF or RJ 150 RF 102.0 85.2 19.7 15.9 104 114 508 20.4
25 x 50 D-52D DB52D 600 RF or RJ 150 RF 85.2 56.9 19.7 15.9 104 114 508 20.4
25 x 50 D-53D DB53D 600 RF or RJ 150 RF 70.0 30.7 19.7 15.9 104 114 508 20.4
40 x 50 D-70D DB70D 900 RF or RJ 300 RF 153.1 127.2 41.0 35.0 104 139 508 26.3
40 x 50 D-72D DB72D 900 RF or RJ 300 RF 127.2 85.2 41.0 35.0 104 139 508 26.3
40 x 50 D-73D DB73D 900 RF or RJ 300 RF 105.1 46.2 41.0 35.0 104 139 508 26.3
40 x 50 D-80D DB80D 1500 RF or RJ 300 RF 255.5 212.4 41.0 35.0 104 139 508 26.3
40 x 50 D-82D DB82D 1500 RF or RJ 300 RF 212.4 142.0 41.0 35.0 104 139 508 26.3
40 x 50 D-83D DB83D 1500 RF or RJ 300 RF 175.1 76.9 41.0 35.0 104 139 508 26.3
40 x 65 D-90D DB90D 2500 RF or RJ 300 RF 413.7 354.1 51.0 35.0 139 165 571 36.3
40 x 65 D-92D DB92D 2500 RF or RJ 300 RF 354.1 236.5 51.0 35.0 139 165 571 36.3
40 x 65 D-93D DB93D 2500 RF or RJ 300 RF 291.7 128.2 51.0 35.0 139 165 571 36.3
Notes
1. Valves set under 1 barg are not ASME code 4. Metric Calculations:
stamped. barg = psig x 0.06895 C
Alloy Steel
538
Body-Spring
Bonnet 482
D-33E
D-33E D-53E
D-53E D-73E
D-73E D-83E
D-83E D-93E
D-93E
427
Carbon Steel 371
Body-Bonnet D-22E
D-22E D-32E
D-32E D-52E
D-52E D-72E
D-72E D-82E
D-82E
Alloy Steel 316
Spring D-12E
D-12E D-92E
D-92E
260
204
Carbon Steel D-20E
D-20E
Body-Bonnet 149
and Spring D-10E
D-10E D-30E
D-30E D-50E
D-50E D-70E
D-70E D-80E
D-80E D-90E
D-90E
93
+38
-29
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
0 14 28 41 55 69 83 97 110 124 138 172 207 241 276 310 345 379 414
Set pressure barg1
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard [barg] [barg @ 38°C] [mm] [kg]
[mm] Inlet Outlet 38°C 232°C 427°C 538°C Conventional Bellows A B Max. C
25 x 50 D-10E DB10E 150 RF or RJ 150 RF 19.7 12.8 19.7 15.9 104 114 508 18.1
25 x 50 D-12E DB12E 150 RF or RJ 150 RF 12.8 5.5 19.7 15.9 104 114 508 18.1
25 x 50 D-20E DB20E 300 RF or RJ 150 RF 19.7 19.7 19.7 15.9 104 114 508 19.5
25 x 50 D-22E DB22E 300 RF or RJ 150 RF 19.7 19.7 19.7 15.9 104 114 508 19.5
25 x 50 D-30E DB30E 300 RF or RJ 150 RF 51.0 42.4 19.7 15.9 104 114 508 20.4
25 x 50 D-32E DB32E 300 RF or RJ 150 RF 42.4 28.3 19.7 15.9 104 114 508 20.4
25 x 50 D-33E DB33E 300 RF or RJ 150 RF 35.2 15.5 19.7 15.9 104 114 508 20.4
25 x 50 D-50E DB50E 600 RF or RJ 150 RF 102.0 85.2 19.7 15.9 104 114 508 20.4
25 x 50 D-52E DB52E 600 RF or RJ 150 RF 85.2 56.9 19.7 15.9 104 114 508 20.4
25 x 50 D-53E DB53E 600 RF or RJ 150 RF 70.0 30.7 19.7 15.9 104 114 508 20.4
40 x 50 D-70E DB70E 900 RF or RJ 300 RF 153.1 127.2 41.0 35.0 104 139 508 26.3
40 x 50 D-72E DB72E 900 RF or RJ 300 RF 127.2 85.2 41.0 35.0 104 139 508 26.3
40 x 50 D-73E DB73E 900 RF or RJ 300 RF 105.1 46.2 41.0 35.0 104 139 508 26.3
40 x 50 D-80E DB80E 1500 RF or RJ 300 RF 255.5 212.4 41.0 35.0 104 139 508 26.3
40 x 50 D-82E DB82E 1500 RF or RJ 300 RF 212.4 142.0 41.0 35.0 104 139 508 26.3
40 x 50 D-83E DB83E 1500 RF or RJ 300 RF 175.1 76.9 41.0 35.0 104 139 508 26.3
40 x 65 D-90E DB90E 2500 RF or RJ 300 RF 413.7 354.1 51.0 35.0 139 165 571 36.3
40 x 65 D-92E DB92E 2500 RF or RJ 300 RF 354.1 236.5 51.0 35.0 139 165 571 36.3
40 x 65 D-93E DB93E 2500 RF or RJ 300 RF 291.7 128.2 51.0 35.0 139 165 571 36.3
Notes
1. Valves set under 1 barg are not ASME code 4. Metric Calculations:
stamped. barg = psig x 0.06895 C
Alloy Steel
Body-Spring 538
Bonnet
482
D-33F
D-33F D-53F
D-53F D-73F
D-73F D-83F
D-83F D-93F
D-93F
427
Carbon Steel
Body-Bonnet
371
D-22F
D-22F D-32F
D-32F D-52F
D-52F D-72F
D-72F D-82F
D-82F
Alloy Steel
316
Spring D-12F D-92F
D-12F D-92F
260
Carbon Steel 204
Body-Bonnet D-20F
D-20F
and Spring 149
D-10F
D-10F D-30F
D-30F D-50F
D-50F D-70F
D-70F D-80F
D-80F D-90F
D-90F
93
+38
-29
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
0 14 28 41 55 69 83 97 110 124 138 172 207 241 276 310 345
Set pressure barg1
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard [barg] [barg @ 38°C] [mm] [kg]
[mm] Inlet Outlet 38°C 232°C 427°C 538°C Conventional Bellows A B Max. C
40 x 50 D-10F DB10F 150 RF or RJ 150 RF 19.7 12.8 19.7 15.9 123 120 527 19.5
40 x 50 D-12F DB12F 150 RF or RJ 150 RF 12.8 5.5 19.7 15.9 123 120 527 19.5
40 x 50 D-20F DB20F 300 RF or RJ 150 RF 19.7 19.7 19.7 15.9 123 120 527 21.3
40 x 50 D-22F DB22F 300 RF or RJ 150 RF 19.7 19.7 19.7 15.9 123 120 527 21.3
40 x 50 D-30F DB30F 300 RF or RJ 150 RF 51.0 42.4 19.7 15.9 123 152 527 22.7
40 x 50 D-32F DB32F 300 RF or RJ 150 RF 42.4 28.3 19.7 15.9 123 152 527 22.7
40 x 50 D-33F DB33F 300 RF or RJ 150 RF 35.2 15.5 19.7 15.9 123 152 527 22.7
40 x 50 D-50F DB50F 600 RF or RJ 150 RF 102.0 85.2 19.7 15.9 123 152 527 22.7
40 x 50 D-52F DB52F 600 RF or RJ 150 RF 85.2 56.9 19.7 15.9 123 152 527 22.7
40 x 50 D-53F DB53F 600 RF or RJ 150 RF 70.0 30.7 19.7 15.9 123 152 527 22.7
40 x 65 D-70F DB70F 900 RF or RJ 300 RF 153.1 127.2 51.0 35.0 123 152 527 28.6
40 x 65 D-72F DB72F 900 RF or RJ 300 RF 127.2 85.2 51.0 35.0 123 152 527 28.6
40 x 65 D-73F DB73F 900 RF or RJ 300 RF 105.1 46.2 51.0 35.0 123 152 527 28.6
40 x 65 D-80F DB80F 1500 RF or RJ 300 RF 255.5 212.4 51.0 35.0 123 152 517 30.9
40 x 65 D-82F DB82F 1500 RF or RJ 300 RF 212.4 142.0 51.0 35.0 123 152 552 30.9
40 x 65 D-83F DB83F 1500 RF or RJ 300 RF 175.1 76.9 51.0 35.0 123 152 552 30.9
40 x 65 D-90F DB90F 2500 RF or RJ 300 RF 344.8 344.8 51.0 35.0 139 165 527 36.3
40 x 65 D-92F DB92F 2500 RF or RJ 300 RF 344.8 236.5 51.0 35.0 139 165 571 36.3
40 x 65 D-93F DB93F 2500 RF or RJ 300 RF 291.7 128.2 51.0 35.0 139 165 571 36.3
Notes
1. Valves set under 1 barg are not ASME code 4. Metric Calculations:
stamped. barg = psig x 0.06895 C
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard [barg] [barg @ 38°C] [mm] [kg]
[mm] Inlet Outlet 38°C 232°C 427°C 538°C Conventional Bellows A B Max. C
40 x 65 D-10G DB10G 150 RF or RJ 150 RF 19.7 12.8 19.7 15.9 123 120 527 20.9
40 x 65 D-12G DB12G 150 RF or RJ 150 RF 12.8 5.5 19.7 15.9 123 120 527 20.9
40 x 65 D-20G DB20G 300 RF or RJ 150 RF 19.7 19.7 19.7 15.9 123 120 527 22.7
40 x 65 D-22G DB22G 300 RF or RJ 150 RF 19.7 19.7 19.7 15.9 123 120 527 22.7
40 x 65 D-30G DB30G 300 RF or RJ 150 RF 51.0 42.4 19.7 15.9 123 152 527 25.0
40 x 65 D-32G DB32G 300 RF or RJ 150 RF 42.4 28.3 19.7 15.9 123 152 527 25.0
40 x 65 D-33G DB33G 300 RF or RJ 150 RF 35.2 15.5 19.7 15.9 123 152 527 25.0
40 x 65 D-50G DB50G 600 RF or RJ 150 RF 102.0 85.2 19.7 15.9 123 152 527 25.0
40 x 65 D-52G DB52G 600 RF or RJ 150 RF 85.2 56.9 19.7 15.9 123 152 527 25.0
40 x 65 D-53G DB53G 600 RF or RJ 150 RF 70.0 30.7 19.7 15.9 123 152 527 25.0
40 x 65 D-70G DB70G 900 RF or RJ 300 RF 153.1 127.2 51.0 32.0 123 152 527 30.4
40 x 65 D-72G DB72G 900 RF or RJ 300 RF 127.2 85.2 51.0 32.0 123 152 552 30.4
40 x 65 D-73G DB73G 900 RF or RJ 300 RF 105.1 46.2 51.0 32.0 123 152 552 30.4
50 x 80 D-80G DB80G 1500 RF or RJ 300 RF 255.5 212.4 51.0 32.0 155 171 647 63.5
50 x 80 D-82G DB82G 1500 RF or RJ 300 RF 212.4 142.0 51.0 32.0 155 171 647 63.5
50 x 80 D-83G DB83G 1500 RF or RJ 300 RF 175.1 76.9 51.0 32.0 155 171 647 63.5
50 x 80 D-90G DB90G 2500 RF or RJ 300 RF 255.5 255.5 51.0 32.0 155 171 647 70.3
50 x 80 D-92G DB92G 2500 RF or RJ 300 RF 255.5 236.5 51.0 32.0 155 171 647 70.3
50 x 80 D-93G DB93G 2500 RF or RJ 300 RF 255.5 128.2 51.0 32.0 155 171 647 70.3
Notes
1. Valves set under 1 barg are not ASME code 4. Metric Calculations:
stamped. barg = psig x 0.06895 C
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard [barg] [barg @ 38°C] [mm] [kg]
[mm] Inlet Outlet 38°C 232°C 427°C 538°C Conventional Bellows A B Max. C
40 x 80 D-10H DB10H 150 RF or RJ 150 RF 19.7 12.8 19.7 15.9 130 123 533 22.7
40 x 80 D-12H DB12H 150 RF or RJ 150 RF 12.8 5.5 19.7 15.9 130 123 533 22.7
40 x 80 D-20H DB20H 300 RF or RJ 150 RF 19.7 19.7 19.7 15.9 130 123 533 24.5
40 x 80 D-22H DB22H 300 RF or RJ 150 RF 19.7 19.7 19.7 15.9 130 123 533 24.5
50 x 80 D-30H DB30H 300 RF or RJ 150 RF 51.0 42.4 19.7 15.9 130 123 533 26.3
50 x 80 D-32H DB32H 300 RF or RJ 150 RF 42.4 28.3 19.7 15.9 130 123 533 26.3
50 x 80 D-33H DB33H 300 RF or RJ 150 RF 35.2 15.5 19.7 15.9 130 123 533 26.3
50 x 80 D-50H DB50H 600 RF or RJ 150 RF 102.0 85.2 19.7 15.9 154 161 647 54.4
50 x 80 D-52H DB52H 600 RF or RJ 150 RF 85.2 56.9 19.7 15.9 154 161 647 54.4
50 x 80 D-53H DB53H 600 RF or RJ 150 RF 70.0 30.7 19.7 15.9 130 123 533 27.2
50 x 80 D-70H DB70H 900 RF or RJ 150 RF 153.1 127.2 19.7 15.9 154 161 647 61.2
50 x 80 D-72H DB72H 900 RF or RJ 150 RF 127.2 85.2 19.7 15.9 154 161 647 61.2
50 x 80 D-73H DB73H 900 RF or RJ 150 RF 105.1 46.2 19.7 15.9 154 161 647 61.2
50 x 80 D-80H DB80H 1500 RF or RJ 300 RF 189.6 189.6 51.0 29.0 154 161 647 63.5
50 x 80 D-82H DB82H 1500 RF or RJ 300 RF 189.6 142.0 51.0 29.0 154 161 647 63.5
50 x 80 D-83H DB83H 1500 RF or RJ 300 RF 175.1 76.9 51.0 29.0 154 161 508 63.5
Notes
1. Valves set under 1 barg are not ASME code 4. Metric Calculations:
stamped. barg = psig x 0.06895 C
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard [barg] [barg @ 38°C] [mm] [kg]
[mm] Inlet Outlet 38°C 232°C 427°C 538°C Conventional Bellows A B Max. C
50 x 80 D-10J DB10J 150 RF or RJ 150 RF 19.7 12.8 19.7 15.9 136 123 552 26.3
50 x 80 D-12J DB12J 150 RF or RJ 150 RF 12.8 5.5 19.7 15.9 136 123 552 26.3
50 x 80 D-20J DB20J 300 RF or RJ 150 RF 19.7 19.7 19.7 15.9 136 123 552 28.1
50 x 80 D-22J DB22J 300 RF or RJ 150 RF 19.7 19.7 19.7 15.9 136 123 552 28.1
65 x 100 D-30J DB30J 300 RF or RJ 150 RF 51.0 42.4 19.7 15.9 136 142 577 34.5
65 x 100 D-32J DB32J 300 RF or RJ 150 RF 42.4 28.3 19.7 15.9 136 142 577 34.5
65 x 100 D-33J DB33J 300 RF or RJ 150 RF 35.2 15.5 19.7 15.9 136 142 577 34.5
65 x 100 D-50J DB50J 600 RF or RJ 150 RF 102.0 85.2 19.7 15.9 155 171 647 59.0
65 x 100 D-52J DB52J 600 RF or RJ 150 RF 85.2 56.9 19.7 15.9 155 171 647 59.0
65 x 100 D-53J DB53J 600 RF or RJ 150 RF 70.0 30.7 19.7 15.9 136 142 577 36.3
80 x 100 D-70J DB70J 900 RF or RJ 150 RF 153.1 127.2 19.7 15.9 184 181 774 93.0
80 x 100 D-72J DB72J 900 RF or RJ 150 RF 127.2 85.2 19.7 15.9 184 181 774 93.0
65 x 100 D-73J DB73J 900 RF or RJ 150 RF 105.1 46.2 19.7 15.9 155 171 647 70.3
80 x 100 D-80J DB80J 1500 RF or RJ 300 RF 186.2 186.2 41 15.9 184 181 774 106.6
80 x 100 D-82J DB82J 1500 RF or RJ 300 RF 186.2 142.0 41 15.9 184 181 774 106.6
80 x 100 D-83J DB83J 1500 RF or RJ 300 RF 175.1 76.9 41 15.9 184 181 774 106.6
Notes
1. Valves set under 1 barg are not ASME code 4. Metric Calculations:
stamped. barg = psig x 0.06895 C
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard [barg] [barg @ 38°C] [mm] [kg]
[mm] Inlet Outlet 38°C 232°C 427°C 538°C Conventional Bellows A B Max. C
80 x 100 D-10K DB10K 150 RF or RJ 150 RF 19.7 12.8 19.7 10.3 155 161 673 54.4
80 x 100 D-12K DB12K 150 RF or RJ 150 RF 12.8 5.5 19.7 10.3 155 161 673 54.4
80 x 100 D-20K DB20K 300 RF or RJ 150 RF 19.7 19.7 19.7 10.3 155 161 673 59.0
80 x 100 D-22K DB22K 300 RF or RJ 150 RF 19.7 19.7 19.7 10.3 155 161 673 59.0
80 x 100 D-30K DB30K 300 RF or RJ 150 RF 51.0 42.4 19.7 10.3 155 161 673 61.2
80 x 100 D-32K DB32K 300 RF or RJ 150 RF 42.4 28.3 19.7 10.3 155 161 673 61.2
80 x 100 D-33K DB33K 300 RF or RJ 150 RF 35.2 15.5 19.7 10.3 155 161 673 61.2
80 x 100 D-50K DB50K 600 RF or RJ 150 RF 102.0 85.2 19.7 13.8 184 181 774 83.9
80 x 100 D-52K DB52K 600 RF or RJ 150 RF 85.2 56.9 19.7 13.8 184 181 774 83.9
80 x 100 D-53K DB53K 600 RF or RJ 150 RF 70.0 30.7 19.7 13.8 155 161 673 61.2
80 x 150 D-70K DB70K 900 RF or RJ 150 RF 153.1 127.2 19.7 13.8 198 215 876 97.5
80 x 150 D-72K DB72K 900 RF or RJ 150 RF 127.2 85.2 19.7 13.8 198 215 876 97.5
80 x 100 D-73K DB73K 900 RF or RJ 150 RF 105.1 46.2 19.7 13.8 184 181 774 90.7
80 x 150 D-80K DB80K 1500 RF or RJ 300 RF 153.1 153.1 41.0 13.8 196 215 876 115.7
80 x 150 D-82K DB82K 1500 RF or RJ 300 RF 153.1 142.0 41.0 13.8 196 215 876 115.7
80 x 150 D-83K DB83K 1500 RF or RJ 300 RF 140.7 76.9 41.0 13.8 196 215 876 115.7
Notes
1. Valves set under 1 barg are not ASME code 4. Metric Calculations:
stamped. barg = psig x 0.06895 C
Alloy Steel
Body-Spring
538
Bonnet D-83L
482 D-83L
D-33L
D-33L D-53L
D-53L D-73L
D-73L
427
Carbon Steel D-82L
Body-Bonnet 371
Alloy Steel D-22L
D-22L D-32L
D-32L D-52L
D-52L D-72L
D-72L
Spring 316
D-12L
D-12L
260
204
Carbon Steel D-20L
D-20L
Body-Bonnet 149 D-70L
D-70L
and Spring D-10L
D-10L D-30L
D-30L D-50L
D-50L
93
+38
-29
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
0 14 28 41 55 69 83 97 110
Set pressure barg1
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard [barg] [barg @ 38°C] [mm] [kg]
[mm] Inlet Outlet 38°C 232°C 427°C 538°C Conventional Bellows A B Max. C
80 x 100 D-10L DB10L 150 RF or RJ 150 RF 19.7 12.8 19.7 6.9 155 165 673 59.0
80 x 100 D-12L DB12L 150 RF or RJ 150 RF 12.8 5.5 19.7 6.9 155 165 673 59.0
80 x 100 D-20L DB20L 300 RF or RJ 150 RF 19.7 19.7 19.7 6.9 155 165 673 63.5
80 x 100 D-22L DB22L 300 RF or RJ 150 RF 19.7 19.7 19.7 6.9 155 165 673 63.5
100 x 150 D-30L DB30L 300 RF or RJ 150 RF 51.0 42.4 19.7 11.7 179 181 768 90.7
100 x 150 D-32L DB32L 300 RF or RJ 150 RF 42.4 28.3 19.7 11.7 179 181 768 90.7
100 x 150 D-33L DB33L 300 RF or RJ 150 RF 35.2 15.5 19.7 11.7 179 181 768 90.7
100 x 150 D-50L DB50L 600 RF or RJ 150 RF 69.0 69.0 19.7 11.7 179 203 768 99.8
100 x 150 D-52L DB52L 600 RF or RJ 150 RF 69.0 56.9 19.7 11.7 179 203 768 99.8
100 x 150 D-53L DB53L 600 RF or RJ 150 RF 69.0 30.7 19.7 11.7 179 203 768 99.8
100 x 150 D-70L DB70L 900 RF or RJ 150 RF 113.8 113.8 19.7 11.7 196 222 870 113.4
100 x 150 D-72L DB72L 900 RF or RJ 150 RF 113.8 85.2 19.7 11.7 196 222 870 113.4
100 x 150 D-73L DB73L 900 RF or RJ 150 RF 105.1 46.2 19.7 11.7 196 222 870 113.4
100 x 150 D-82L DB82L 1500 RF or RJ 150 RF 113.8 103.4 19.7 11.7 196 222 870 122.5
100 x 150 D-83L DB83L 1500 RF or RJ 150 RF 113.8 113.8 76.9 19.7 11.7 196 222 870 122.5
Notes
1. Valves set under 1 barg are not ASME code 4. Metric Calculations:
stamped. barg = psig x 0.06895 C
Alloy Steel
Body-Spring
538
Bonnet D-73M
482 D-73M
D-33M
D-33M D-53M
D-53M
427
Carbon Steel
D-72M
D-72M
Body-Bonnet 371
Alloy Steel D-22M
D-22M D-32M
D-32M D-52M
D-52M
Spring 316
D-12M
D-12M
260
204
Carbon Steel D-20M
D-20M
Body-Bonnet 149
and Spring D-10M
D-10M D-30M
D-30M D-50M
D-50M
93
+38
-29
▲ ▲ ▲ ▲ ▲ ▲ ▲
0 14 28 41 55 69 82
Set pressure barg1
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard [barg] [barg @ 38°C] [mm] [kg]
[mm] Inlet Outlet 38°C 232°C 427°C 538°C Conventional Bellows A B Max. C
100 x 150 D-10M DB10M 150 RF or RJ 150 RF 19.7 12.8 19.7 5.5 177 184 768 86.1
100 x 150 D-12M DB12M 150 RF or RJ 150 RF 12.8 5.5 19.7 5.5 177 184 768 86.1
100 x 150 D-20M DB20M 300 RF or RJ 150 RF 19.7 19.7 19.7 5.5 177 184 768 90.7
100 x 150 D-22M DB22M 300 RF or RJ 150 RF 19.7 19.7 19.7 5.5 177 184 768 90.7
100 x 150 D-30M DB30M 300 RF or RJ 150 RF 51.0 42.4 19.7 11.0 177 184 768 93.0
100 x 150 D-32M DB32M 300 RF or RJ 150 RF 42.4 28.3 19.7 11.0 177 184 768 93.0
100 x 150 D-33M DB33M 300 RF or RJ 150 RF 35.2 15.5 19.7 11.0 177 184 768 93.0
100 x 150 D-50M DB50M 600 RF or RJ 150 RF 82.7 82.7 19.7 11.0 177 203 857 104.0
100 x 150 D-52M DB52M 600 RF or RJ 150 RF 82.7 56.9 19.7 11.0 177 203 857 104.0
100 x 150 D-53M DB53M 600 RF or RJ 150 RF 70.0 30.7 19.7 11.0 177 203 857 104.0
100 x 150 D-72M DB72M 900 RF or RJ 150 RF 82.7 82.7 19.7 11.0 196 222 870 117.9
100 x 150 D-73M DB73M 900 RF or RJ 150 RF 82.7 46.2 19.7 11.0 196 222 870 117.9
Notes
1. Valves set under 1 barg are not ASME code 4. Metric Calculations:
stamped. barg = psig x 0.06895 C
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard [barg] [barg @ 38°C] [mm] [kg]
[mm] Inlet Outlet 38°C 232°C 427°C 538°C Conventional Bellows A B Max. C
100 x 150 D-10N DB10N 150 RF or RJ 150 RF 19.7 12.8 19.7 5.5 196 209 800 90.7
100 x 150 D-12N DB12N 150 RF or RJ 150 RF 12.8 5.5 19.7 5.5 196 209 800 90.7
100 x 150 D-20N DB20N 300 RF or RJ 150 RF 19.7 19.7 19.7 5.5 196 209 800 90.7
100 x 150 D-22N DB22N 300 RF or RJ 150 RF 19.7 19.7 19.7 5.5 196 209 800 90.7
100 x 150 D-30N DB30N 300 RF or RJ 150 RF 51.0 42.4 19.7 11.0 196 209 889 104.3
100 x 150 D-32N DB32N 300 RF or RJ 150 RF 42.4 28.3 19.7 11.0 196 209 889 104.3
100 x 150 D-33N DB33N 300 RF or RJ 150 RF 35.2 15.5 19.7 11.0 196 209 800 97.5
100 x 150 D-50N DB50N 600 RF or RJ 150 RF 72.4 72.4 19.7 11.0 196 222 889 113.4
100 x 150 D-52N DB52N 600 RF or RJ 150 RF 72.4 56.9 19.7 11.0 196 222 889 113.4
100 x 150 D-53N DB53N 600 RF or RJ 150 RF 70.0 30.7 19.7 11.0 196 222 889 113.4
100 x 150 D-72N DB72N 900 RF or RJ 150 RF 72.4 69.0 19.7 11.0 196 222 889 122.5
100 x 150 D-73N DB73N 900 RF or RJ 150 RF 72.4 46.2 19.7 11.0 196 222 889 122.5
Notes
1. Valves set under 1 barg are not ASME code 4. Metric Calculations:
stamped. barg = psig x 0.06895 C
538
Alloy Steel
Body-Spring 482 D-73P
D-73P
Bonnet D-33P
D-33P D-53P
D-53P
427
D-72P
D-72P
Carbon Steel
Body-Bonnet
371
D-22P
D-22P D-32P
D-32P D-52P
D-52P
Alloy Steel 316
Spring D-12P
D-12P
260
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard [barg] [barg @ 38°C] [mm] [kg]
[mm] Inlet Outlet 38°C 232°C 427°C 538°C Conventional Bellows A B Max. C
100 x 150 D-10P DB10P 150 RF or RJ 150 RF 19.7 12.8 19.7 5.5 181 228 784 95.3
100 x 150 D-12P DB12P 150 RF or RJ 150 RF 12.8 5.5 19.7 5.5 181 228 784 95.3
100 x 150 D-20P DB20P 300 RF or RJ 150 RF 19.7 19.7 19.7 5.5 181 228 784 99.8
100 x 150 D-22P DB22P 300 RF or RJ 150 RF 19.7 19.7 19.7 5.5 181 228 784 99.8
100 x 150 D-30P DB30P 300 RF or RJ 150 RF 36.2 36.2 19.7 10.3 225 254 1079 149.7
100 x 150 D-32P DB32P 300 RF or RJ 150 RF 36.2 28.3 19.7 10.3 225 254 1079 149.7
100 x 150 D-33P DB33P 300 RF or RJ 150 RF 35.2 15.5 19.7 10.3 225 254 1079 149.7
100 x 150 D-50P DB50P 600 RF or RJ 150 RF 69.0 69.0 19.7 10.3 225 254 1079 163.3
100 x 150 D-52P DB52P 600 RF or RJ 150 RF 69.0 56.9 19.7 10.3 225 254 1079 163.3
100 x 150 D-53P DB53P 600 RF or RJ 150 RF 69.0 30.7 19.7 10.3 225 254 1079 163.3
100 x 150 D-72P DB72P 900 RF or RJ 150 RF 69.0 69.0 19.7 10.3 225 254 1079 172.4
100 x 150 D-73P DB73P 900 RF or RJ 150 RF 69.0 46.2 19.7 10.3 225 254 1079 172.4
Notes
1. Valves set under 1 barg are not ASME code 4. Metric Calculations:
stamped. barg = psig x 0.06895 C
2. Maximum A and B dimensions ±2mm. mm = in x 25.4
kg = lb x 0.4536
3. Valve capacities are listed in the PRV Capacity °C = (°F – 32) x .5556 A
Tables Catalog for air, steam, and water.
B
538
Alloy Steel
Body-Spring 482
Bonnet D-33Q
D-33Q D-53Q
D-53Q
427
Carbon Steel 371
Body-Bonnet D-22Q
D-22Q D-52Q
D-52Q
Alloy Steel 316
Spring D-12Q
D-12Q D-32Q
D-32Q
260
204
Carbon Steel
Body-Bonnet 149
and Spring D-10Q
D-10Q D-30Q
D-30Q D-50Q
D-50Q
93 D-20Q
D-20Q
+38
-29
▲ ▲ ▲ ▲
0 14 28 41
Set pressure barg1
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard [barg] [barg @ 38°C] [mm] [kg]
[mm] Inlet Outlet 38°C 232°C 427°C 538°C Conventional Bellows A B Max. C
150 x 200 D-10Q DB10Q 150 RF or RJ 150 RF 11.4 11.4 7.9 4.8 239 241 1155 217.7
150 x 200 D-12Q DB12Q 150 RF or RJ 150 RF 11.4 5.5 7.9 4.8 239 241 1155 217.7
150 x 200 D-20Q DB20Q 300 RF or RJ 150 RF 11.4 11.4 7.9 4.8 239 241 1155 226.8
150 x 200 D-22Q DB22Q 300 RF or RJ 150 RF 11.4 11.4 7.9 4.8 239 241 1155 226.8
150 x 200 D-30Q DB30Q 300 RF or RJ 150 RF 20.7 20.7 7.9 7.9 239 241 1155 235.9
150 x 200 D-32Q DB32Q 300 RF or RJ 150 RF 20.7 20.7 7.9 7.9 239 241 1155 235.9
150 x 200 D-33Q DB33Q 300 RF or RJ 150 RF 11.4 11.4 7.9 7.9 239 241 1155 235.9
150 x 200 D-50Q DB50Q 600 RF or RJ 150 RF 41.4 41.4 7.9 7.9 239 241 1250 285.8
150 x 200 D-52Q DB52Q 600 RF or RJ 150 RF 41.4 41.4 7.9 7.9 239 241 1250 285.8
150 x 200 D-53Q DB53Q 600 RF or RJ 150 RF 41.4 30.7 7.9 7.9 239 241 1250 285.8
Notes
1. Valves set under 1 barg are not ASME code 4. Metric Calculations:
stamped. barg = psig x 0.06895 C
538
Alloy Steel
Body-Spring 482 D-33R
D-33R D-53R
D-53R
Bonnet
427
Carbon Steel
Body-Bonnet 371
Alloy Steel
D-52R
D-52R
Spring 316 D-12R
D-12R D-32R
D-32R
D-22R
D-22R
260
204
Carbon Steel
Body-Bonnet 149
and Spring D-10R
D-10R D-30R
D-30R D-50R
D-50R
93 D-20R
D-20R
+38
-29
▲ ▲ ▲ ▲
0 7 14 21
Set pressure barg1
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard [barg] [barg @ 38°C] [mm] [kg]
[mm] Inlet Outlet 38°C 232°C 427°C 538°C Conventional Bellows A B Max. C
150 x 200 D-10R DB10R 150 RF or RJ 150 RF 6.9 6.9 4.1 4.1 239 241 1155 226.8
150 x 200 D-12R DB12R 150 RF or RJ 150 RF 6.9 6.9 4.1 4.1 239 241 1155 226.8
150 x 200 D-20R DB20R 300 RF or RJ 150 RF 6.9 6.9 4.1 4.1 239 241 1155 235.9
150 x 200 D-22R DB22R 300 RF or RJ 150 RF 6.9 6.9 4.1 4.1 239 241 1155 235.9
150 x 250 D-30R DB30R 300 RF or RJ 150 RF 15.9 15.9 6.9 6.9 239 266 1257 281.2
150 x 250 D-32R DB32R 300 RF or RJ 150 RF 15.9 15.9 6.9 6.9 239 266 1257 281.2
150 x 200 D-33R DB33R 300 RF or RJ 150 RF 6.9 6.9 4.1 4.1 239 241 1250 235.9
150 x 250 D-50R DB50R 600 RF or RJ 150 RF 20.7 20.7 6.9 6.9 239 266 1257 299.4
150 x 250 D-52R DB52R 600 RF or RJ 150 RF 20.7 20.7 6.9 6.9 239 266 1257 299.4
150 x 250 D-53R DB53R 600 RF or RJ 150 RF 20.7 20.7 6.9 6.9 239 266 1257 299.4
Notes
1. Valves set under 1 barg are not ASME code 4. Metric Calculations:
stamped. barg = psig x 0.06895 C
Alloy Steel
538
Body-Spring
482 D-33T
D-33T D-53T
D-53T
Bonnet
427
Carbon Steel
Body-Bonnet 371
Alloy Steel
D-52T
D-52T
316 D-12T
D-12T
Spring
D-22T D-32T
D-32T
D-22T
260
204
Carbon Steel D-30T
D-30T
Body-Bonnet 149
and Spring D-50T
D-50T
D-10T
D-10T
93 D-20T
D-20T
+38
-29
▲ ▲ ▲ ▲
0 7 14 21
Set pressure barg1
Specifications
Valve Valve Model Flange Connections Maximum Set Pressure Maximum Back Pressure Valve Dimensions2 Weight
Size Conv. Bellows ASA Standard [barg] [barg @ 38°C] [mm] [kg]
[mm] Inlet Outlet 38°C 232°C 427°C 538°C Conventional Bellows A B Max. C
200 x 250 D-10T DB10T 150 RF or RJ 150 RF 4.5 4.5 2.1 2.1 276 279 1212 303.9
200 x 250 D-12T DB12T 150 RF or RJ 150 RF 4.5 4.5 2.1 2.1 276 279 1212 303.9
200 x 250 D-20T DB20T 300 RF or RJ 150 RF 4.5 4.5 2.1 2.1 276 279 1212 317.5
200 x 250 D-22T DB22T 300 RF or RJ 150 RF 4.5 4.5 2.1 2.1 276 279 1212 317.5
200 x 250 D-30T DB30T 300 RF or RJ 150 RF 8.3 8.3 4.1 4.1 276 279 1308 358.3
200 x 250 D-32T DB32T 300 RF or RJ 150 RF 8.3 8.3 4.1 4.1 276 279 1308 358.3
200 x 250 D-33T DB33T 300 RF or RJ 150 RF 8.3 8.3 4.1 4.1 276 279 1308 358.3
200 x 250 D-50T DB50T 300 RF or RJ 150 RF 20.7 20.7 6.9 4.1 276 279 1390 376.5
200 x 250 D-52T DB52T 300 RF or RJ 150 RF 20.7 20.7 6.9 4.1 276 279 1390 376.5
200 x 250 D-53T DB53T 300 RF or RJ 150 RF 20.7 15.5 6.9 4.1 276 279 1390 376.5
Notes
1. Valves set under 1 barg are not ASME code 5. Metric Calculations:
stamped. barg = psig x 0.06895 C
Notes
1. Steam valves set under 15 psig are not ASME 3. Valve capacities are listed in the PRV Capacity
code stamped. Tables Catalog for air, steam, and water.
Notes
1. Steam valves set under 15 psig are not ASME 4. Alloy springs required for temperatures greater
code stamped. than 750°F. Valve model number changes to
DS32, DS33. DS52 or DS53.
2. Maximum A and B dimensions ±1/16-inch up to
C
4-inch inlet size, ±1/8-inch for 6-inch and 5. Alloy body/yoke required for temperatures
above. greater than 800°F. Valve model number
changes to DS33 or DS53.
3. Valve capacities are listed in the PRV Capacity
Tables Catalog for air, steam, and water. A
Notes
1. Steam valves set under 1 barg are not ASME 4. Metric Calculations:
code stamped. cm2 = in2 x 6.4516
2. Maximum A and B dimensions ±1.6mm up to °C = (°F – 32) x .5556
mm = in x 25.4 C
100mm, ± 3.2mm above 100mm inlet.
kg = lb x 0.4536
3. Valve capacities are listed in the PRV Capacity
Tables Catalog for air, steam, and water.
A
Notes
1. Steam valves set under 1 barg are not ASME 5. Alloy body/yoke required for temperatures
code stamped. above 426°C. Valve model numbers changes
to DS33 or DS53.
2. Maximum A and B dimensions ±1.6mm up
C
to 100mm ±3.2mm above 100mm inlet. 6. Metric Calculations:
cm2 = in2 x 6.4516
3. Valve capacities are listed in the PRV Capacity
Tables Catalog for air, steam, and water. °C = (°F – 32) x .5556
mm = in x 25.4 A
4. Alloy springs required for temperatures above kg = lb x 0.4536
399°C. Valve model number changes to DS32,
B
DS33, DS52, or DS53.
D, ND Series –
Conventional Pressure Relief Valve
Bill of Materials (S1 Trim) – Figure 1
22
5
23
6A
21
10 6B
1
7
11 8
9
24
16
12
17
14
13
18
15 19
25
20
D, ND Series –
Conventional Pressure Relief Valve
Bill of Materials (S1 Trim) – Figure 1
Part No. Part Name Materials
1 Point A582 416 SS
2 Compression Screw A479 316 SS
3 Bonnet Plug CS
4 Locknut A479 316 SS
5 Gasket, Cap Soft Iron
6A Top Spring Step A108 CS1 or A479 316 SS
6B Bottom Spring Step A108 CS1 or A479 316 SS
7 Body Studs SA193 GR. B7
8 Stud Nuts SA194 GR. 2H
9 Bonnet Gasket Soft Iron
10 Stem A479 316 SS
Guide A351 CF8M 316 SS
11
Guide (Steam Service) A494 M-35-2, Monel®
12 Guide Gasket Soft Iron
13 Disc Holder Insert A582 416 SS
14 Ring Pin Gasket Soft Iron
15 Ring Pin A479 316 SS
16 Disc Holder A351 CF8M 316 SS
17 Disc Retainer A313 302 SS
18 Disc A479 316 SS
19 Nozzle Ring A351 CF8M 316 SS
20 Nozzle SA351 CF8M 316 SS or A479 316 SS
Spring A229 or A6892,3
21
Spring (Above 450°F) A681 GR. H12 or B637 UNS N077504,5,6
22 Cap(screwed) A216 WCB
Bonnet SA216 WCB2,4
23
Bonnet (Above 750°F) SA217 WC65
Body SA216 WCB2,4
24
Body (Above 750°F) SA217 WC65
25 Body Plug CS
Notes
1. CS spring steps are zinc-cobalt plated.
22
2
4
5
23
21
10 7
1
8
26
9
24 11
12
13
27
31
28
16
16
14
17
15
18
3
19
20
Notes
1. CS spring steps are zinc-cobalt plated.
29
27
28 2
24
5
7
31
3
30
8A
1
23
4
9
8B 10
11
13
18 14
19
16
15
17
12
20
26 21
25
22
Notes
1. For Models DS10, DS30, DS50.
Stem A479 316 SS A479 316 SS A479 316 SS A479 316 SS A479 316 SS
Point1 A582 416 SS A479 316 SS A479 316 SS A479 316 SS A582 416 SS
Compression Screw A479 316 SS A479 316 SS A479 316 SS A479 316 SS A479 316 SS
Bonnet Plug2 CS CS A479 316 SS A479 316 SS N/A
Locknut A479 316 SS A479 316 SS A479 316 SS A479 316 SS A479 316 SS
Gasket, Cap Soft Iron Monel® Monel® Monel® Soft Iron
A108 CS or A108 CS or A108 CS or A108 CS or
Spring Steps3 A479 316 SS
A479 316 SS A479 316 SS A479 316 SS A479 316 SS
Body Studs SA193 GR. B7 SA193 GR. B7 SA193 GR. B8 SA193 GR. B8 SA193 GR. B7
Stud Nuts SA194 GR. 2H SA194 GR. 2H SA194 GR. 8 SA194 GR. 8 SA194 GR. 2H
Bonnet Gasket Soft Iron Monel® Monel® Monel® Soft Iron
Guide4 A351 CF8M 316 SS A351 CF8M 316 SS A351 CF8M 316 SS A351 CF8M 316 SS A351 CF8M 316 SS
Guide Gasket (D, DO) Soft Iron Monel® Monel® Monel® N/A
Guide Gasket (DB, DBO) Fiber and Nitrile Fiber and Nitrile Fiber and Nitrile Fiber and Nitrile Fiber and Nitrile
Holder Insert A582 416 SS A479 316 SS A479 316 SS A479 316 SS A582 416 SS
Ring Pin Gasket Soft Iron Monel® Monel® Monel® Monel®
Ring Pin A479 316 SS A479 316 SS A479 316 SS A479 316 SS A479 316 SS
Disc Holder A351 CF8M 316 SS A351 CF8M 316 SS A351 CF8M 316 SS A351 CF8M 316 SS A351 CF8M 316 SS
Disc Retainer A313 302 SS A313 302 SS A313 302 SS A313 302 SS A313 302 SS
Disc5 A479 316 SS A479 316 SS A479 316 SS A479 316 SS A479 316 SS
Nozzle Ring A351 CF8M 316 SS A351 CF8M 316 SS A351 CF8M 316 SS A351 CF8M 316 SS A351 CF8M 316 SS
Nozzle6 SA351 CF8M 316 SS SA351 CF8M 316 SS SA351 CF8M 316 SS SA351 CF8M 316 SS SA351 CF8M 316 SS
Spring7,8,9 A229 or A689 A229 or A689 A229 or A689 A313 316 SS A229 or A689
Cap A216 WCB A216 WCB A351 CF8M 316 SS A351 CF8M 316 SS A216 WCB
Bonnet10 SA216 WCB SA216 WCB SA351 CF8M 316 SS SA351 CF8M 316 SS SA216 WCB
Body10 SA216 WCB SA216 WCB SA351 CF8M 316 SS SA351 CF8M 316 SS SA351 CF8M 316 SS
Body Plug CS CS SS SS SS
Bellows B443 Inconel® 625 B443 Inconel® 625 B443 Inconel® 625 B443 Inconel® 625 B443 Inconel® 625
Bellows Flange A240 316L SS A240 316L SS A240 316L SS A240 316L SS A240 316L SS
Bellows Nut A479 316L SS A479 316L SS A479 316L SS A479 316L SS A479 316L SS
Bellows Spacer11 A106 CS A106 CS A479 316 SS A479 316 SS A479 316 SS
Bellows Gasket Fiber and Nitrile Fiber and Nitrile Fiber and Nitrile Fiber and Nitrile Fiber and Nitrile
Notes
1. Not applicable to “D” and “E” orifice DB/DBO 5. Optional disc material for steam service is 8. CS springs are aluminum coated.
Series. A564 Type 630, 17-4 PH SS for material
option S1. 9. SS springs not available for all sizes and
2. Not applicable to DB/DBO Series. pressures. Inconel® X-750 will be used.
6. A479 TY 316 SS may be used as alternate
3. CS spring steps are zinc-cobalt plated for material. 10. High temperature (above 800°F, 427°C) body
material options S1, S2, S3, and S5. and bonnet are SA217 WC6 for material
7. High temperature spring (above 450°F, 232°C) options S1 and S2.
4. Guide material for steam service is Monel®, is A681 GR. H12 or A638 GR. 660 (chrome-
A494 M-35-2 for material options S1 and S5. moly-tungsten-alloy or Inconel®) for material 11. Applicable to “D” and “E” orifice DB/DBO
options S1, S2, S3 and S5. Series only.
Stem A479 316 SS B164 UNS N04400 B164 UNS N04400 B164 UNS N04400 A479 316 SS
Point1 A582 416 SS B164 UNS N04400 B164 UNS N04400 B164 UNS N04400 A582 416 SS
Compression Screw A479 316 SS B164 UNS N04400 B164 UNS N04400 B164 UNS N04400 A479 316 SS
Bonnet Plug2 CS CS B164 UNS N04400 B164 UNS N04400 N/A
Locknut A479 316 SS B164 UNS N04400 B164 UNS N04400 B164 UNS N04400 A479 316 SS
Gasket, Cap Soft Iron Monel® Monel® Monel® Soft Iron
A108 CS or A108 CS or A108 CS or A108 CS or
Spring Steps3 B164 UNS N04400
A479 316 SS A479 316 SS A479 316 SS A479 316 SS
Body Studs SA193 GR. B7 SA193 GR. B7 F468 UNS N04400 F468 UNS N04400 SA193 GR. B7
Stud Nuts SA194 GR. 2H SA194 GR. 2H F467 UNS N04400 F467 UNS N04400 SA194 GR. 2H
Bonnet Gasket Soft Iron Monel® Monel® Monel® Soft Iron
Guide4 A351 CF8M 316 SS A494 GR. M-35-2 A494 GR. M-35-2 A494 GR. M-35-2 A351 CF8M 316 SS
Guide Gasket (D, DO) Soft Iron Monel® Monel® Monel® N/A
Guide Gasket (DB, DBO) Fiber and Nitrile Fiber and Nitrile Fiber and Nitrile Fiber and Nitrile Fiber and Nitrile
Holder Insert A582 416 SS B164 UNS N04400 B164 UNS N04400 B164 UNS N04400 A582 416 SS
Ring Pin Gasket Soft Iron Monel® Monel® Monel® Monel®
Ring Pin A479 316 SS B164 UNS N04400 B164 UNS N04400 B164 UNS N04400 B164 UNS N04400
Disc Holder A351 CF8M 316 SS A494 GR. M-35-2 A494 GR. M-35-2 A494 GR. M-35-2 A194 GR. M-35-2
Disc Retainer A313 302 SS Monel® Monel® Monel® Monel®
Disc B164 UNS N04400 B164 UNS N04400 B164 UNS N04400 B164 UNS N04400 B164 UNS N04400
Nozzle Ring A351 CF8M 316 SS A494 GR. M-35-2 A494 GR. M-35-2 A494 GR. M-35-2 A494 GR. M-35-2
Nozzle A494 GR. M-35-2 A494 GR. M-35-2 A494 GR. M-35-2 A494 GR. M-35-2 A494 GR. M-35-2
Spring5,6 A229 or A689 A229 or A689 A229 or A689 B164 UNS N04400 A229 or A689
Cap A216 WCB A216 WCB A494 GR. M-35-2 A494 GR. M-35-2 A216 WCB
Bonnet7 SA216 WCB SA216 WCB A494 GR. M-35-2 A494 GR. M-35-2 A216 WCB
Body7 SA216 WCB SA216 WCB A494 GR. M-35-2 A494 GR. M-35-2 A494 GR. M-35-2
Body Plug CS CS B164 UNS N04400 B164 UNS N04400 B164 UNS N04400
Bellows B443 Inconel® 625 B164 UNS N04400 B164 UNS N04400 B164 UNS N04400 B164 UNS N04400
Bellows Flange A240 316L SS B164 UNS N04400 B164 UNS N04400 B164 UNS N04400 B164 UNS N04400
Bellows Nut A479 316L SS B164 UNS N04400 B164 UNS N04400 B164 UNS N04400 B164 UNS N04400
Bellows Spacer8 A106 CS B164 UNS N04400 B164 UNS N04400 B164 UNS N04400 B164 UNS N04400
Bellows Gasket Fiber and Nitrile Fiber and Nitrile Fiber and Nitrile Fiber and Nitrile Fiber and Nitrile
Notes
1. Not applicable to “D” and “E” orifice DB/DBO 4. Guide material for steam service is Monel® 6. CS springs are aluminum coated.
Series. A494 M-35-2 for material options M1 and M5.
7. High temperature (above 800°F [427°C]) materi-
2. Not applicable to DB/DBO Series. 5. High temperature spring (above 450°F al is SA217 WC6 for material options M1 and
[232°C]) is A681 GR. H12 or A638 GR. 660 M2.
3. CS spring steps are zinc-cobalt plated for (chrome-moly-tungsten-alloy or Inconel®) for
material options M1, M2, M3 and M5. material options M1, M2, M3 and M5. 8. Applicable to “D” and “E” orifice DB/DBO
Series only.
Stem A479 316 SS B574 UNS N10276 B574 UNS N10276 B574 UNS N10276 A479 316 SS
Point 1 A582 416 SS B574 UNS N10276 B574 UNS N10276 B574 UNS N10276 A582 416 SS
Compression Screw A479 316 SS B574 UNS N10276 B574 UNS N10276 B574 UNS N10276 A479 316 SS
Bonnet Plug2 CS CS B574 UNS N10276 B574 UNS N10276 N/A
Locknut A479 316 SS B574 UNS N10276 B574 UNS N10276 B574 UNS N10276 A479 316 SS
Gasket, Cap Soft Iron Hastelloy® C Hastelloy® C Hastelloy® C Soft Iron
A108 CS or A108 CS or A108 CS or A108 CS or
Spring Steps 3 B574 UNS N10276
A479 316 SS A479 316 SS A479 316 SS A479 316 SS
Body Studs SA193 GR. B7 SA193 GR. B7 F468 UNS N10276 F468 UNS N10276 SA193 GR. B7
Stud Nuts SA194 GR. 2H SA194 GR. 2H F467 UNS N10276 F467 UNS N10276 SA194 GR. 2H
Bonnet Gasket Soft Iron Hastelloy® C Hastelloy® C Hastelloy® C Soft Iron
Guide4 A351 CF8M 316 SS A494 CW-12MW A494 CW-12MW A494 CW-12MW A351 CF8M 316 SS
Gasket (D, DO) Soft Iron Hastelloy® C Hastelloy® C Hastelloy® C N/A
Guide Gasket (DB, DBO) Fiber and Nitrile Fiber and Nitrile Fiber and Nitrile Fiber and Nitrile Fiber and Nitrile
Holder Insert A582 416 SS B574 UNS N10276 B574 UNS N10276 B574 UNS N10276 A582 416 SS
Ring Pin Gasket Soft Iron Hastelloy® C Hastelloy® C Hastelloy® C Hastelloy® C
Ring Pin A479 316 SS B574 UNS N10276 B574 UNS N10276 B574 UNS N10276 B574 UNS N10276
Disc Holder A351 CF8M 316 SS A494 CW-12MW A494 CW-12MW A494 CW-12MW A494 CW-12MW
Disc Retainer A313 302 SS A313 302 SS Hastelloy® C Hastelloy® C Hastelloy® C
Disc B574 UNS N10276 B574 UNS N10276 B574 UNS N10276 B574 UNS N10276 B574 UNS N10276
Nozzle Ring A351 CF8M 316 SS A494 CW-12MW A494 CW-12MW A494 CW-12MW A494 CW-12MW
Nozzle SA494 CW-N12MW SA494 CW-12MW SA494 CW-12MW SA494 CW-12MW SA494 CW-12MW
Spring5,6 A229 or A689 A229 or A689 A229 or A689 B574 UNS N10276 A229 or A689
Cap A216 WCB A216 WCB A494 CW-12MW A494 CW-12MW A216 WCB
Bonnet 7 SA216 WCB SA216 WCB SA494 CW-12MW SA494 CW-12MW SA216 WCB
Body 7 SA216 WCB SA216 WCB SA494 CW-12MW SA494 CW-12MW SA494 CW-12MW
Body Plug A108 CS A108 CS B574 UNS N10276 B574 UNS N10276 B574 UNS N10276
Bellows B443 Inconel® 625 B574 UNS N10276 B574 UNS N10276 B574 UNS N10276 B574 UNS N10276
Bellows Flange A240 316L SS B574 UNS N10276 B574 UNS N10276 B574 UNS N10276 B574 UNS N10276
Bellows Nut A479 316L SS B574 UNS N10276 B574 UNS N10276 B574 UNS N10276 B574 UNS N10276
Bellows Spacer8 A106 CS B574 UNS N10276 B574 UNS N10276 B574 UNS N10276 B574 UNS N10276
Bellows Gasket Fiber and Nitrile Fiber and Nitrile Fiber and Nitrile Fiber and Nitrile Fiber and NitrileGuide
Notes
1. Not applicable to “D” and “E” orifice DB/DBO 4. Guide material for steam service is Monel® 6. CS springs are aluminum coated.
Series. A494 M-35-2 for material options M1 and M5.
7. High temperature (above 800°F [427°C]) materi-
2. Not applicable to DB/DBO Series. 5. High temperature spring (above 450°F al is SA217 WC6 for material options M1 and
[232°C]) is A681 GR. H12 or A638 GR. 660 M2.
3. CS spring steps are zinc-cobalt plated for (chrome-moly-tungsten-alloy or Inconel®) for
material options M1, M2, M3 and M5. material options M1, M2, M3 and M5. 8. Applicable to “D” and “E” orifice DB/DBO
Series only.
Notes
1. Due to severity of service, the selection of
actual Duplex SS material specifications are
chosen for each application, such as UNS
31803, UNS 31254 6MO or A351 GR.
CD4MCu.
Notes
1. NACE Level 1 Compliance - hardness con- 4. Material for D/DO Series is B637 UNS N07750 7. Hardness controlled A479 316 SS is alterna-
trolled 316 SS nozzle and disc. Inconel® X-750. tive material for the nozzle in NACE service.
2. Not applicable to “D” and “E” orifice DB/DBO 5. Material for DB/DBO Series is A229 or A689 8. Applicable to “D” and “E” orifice DB/DBO
Series. CS, steel, aluminized. Series only.
3. Not applicable to DB/DBO Series. 6. Material for DB/DBO Series is A313 316 SS. 9. Material for DB/DBO Series is A108 CS with
zinc-cobalt plating.
Standard construction of pressure relief valve. Foreign particles will often lodge
valves include a screwed cap. However, under the seats of the valve when it dis-
a wide variety of cap styles are available, charges. The ability to lift the valve
at extra charge, to meet the most rigid immediately and flush the obstruction may
requirements. A lifting mechanism is prevent damage and eliminate possible
recommended to test for correct valve shutdown of the unit. Pressure relief
operation at all times where corrosion, valves for Section III and VIII may require
caking or any deposit could prevent the a lift lever on all air, steam, and hot water
opening operation of the pressure relief (>140°F) valves.
Figure 4
Figure 5
Accessories
Figure 7
Steam Jackets
Bolt on steam jacket for preserving valve
temperature in body. For use on fluids to
prevent solidification of the flowing vis-
cous fluids. Consult factory for details.
16 7
14
12
22 20
19 1
1
18
21 8
2
23 10 5
11 3
17
13 4
Specifications
Packed Lever S0, S1, S5, M5 and H5 Trims S2 Trim S3 and S4 L3 Trim
1 Yoke A216 GR. WCB A351 CF8M A351 CF8M A351 CF8M
2 Collar A108 CS A479 316 SS A479 316 SS A479 316 SS
3 Packing Graphite Graphite Graphite Graphite
4 Packing Gland A479 316 A479 316 SS A479 316 SS A479 316 SS
5 Shaft A479 316 SS A479 316 SS A479 316 SS A479 316 SS
6 Cotter Pin (not shown) CS CS SS SS
7 Jam Nut A582 303 SS A582 303 SS A582 303 SS A582 303 SS
8 Cap A216 GR. WCB A216 GR. WCB A351 GR. CF8M A351 GR. CF8M
9 Gasket, Cap (not shown) Soft Iron Monel® Monel® Monel®
10 Cap Bolt A325 A325 F593 316 SS A320 GR. B8
11 Lever CS or Cast Iron CS or Cast Iron CS or Cast Iron CS or Cast Iron
12 Lifting Disc A479 316 SS A479 316 SS A479 316 SS A479 316 SS
13 Adapter A108 CS A108 CS A479 316 SS A479 316 SS
Plain Lever S0, S1, S5, M5 and H5 Trims S2 Trim S3 and S4 L3 Trim
14 Jam Nut A582 303 SS A582 303 SS A582 303 SS A582 303 SS
15 Cotter Pin (not shown) CS CS CS CS
16 Cap Ductile Iron Ductile Iron Ductile Iron Ductile Iron
17 Lever Ductile Iron Ductile Iron Ductile Iron Ductile Iron
18 Lever Pin A108 CS A108 CS A108 CS A108 CS
19 Yoke Ductile Iron Ductile Iron Ductile Iron Ductile Iron
20 Yoke Pin A108 CS A108 CS A108 CS A108 CS
21 Set Screw A108 CS A108 CS A108 CS A108 CS
22 Lifting Disc A479 316 SS A479 316 SS A479 316 SS A479 316 SS
23 Adapter A108 CS A108 CS A108 CS A108 CS
23 5
10
11 3
17
13
4
Specifications
Packed Lever M2 Trim M3 and M4 Trims H2 Trim H3 and H4 Trims
1 Yoke Monel® A494 Monel® A494 Hastelloy® C A494 Hastelloy® C A494
2 Collar Monel® B164 Monel® B164 Hastelloy® C B574 Hastelloy® C B574
3 Packing Graphite Graphite Graphite Graphite
4 Packing Gland A479 316 SS B164 A479 316 SS Hastelloy® C B574
5 Shaft Monel® B164 B164 Hastelloy® C B574 Hastelloy® C B574
6 Cotter Pin (not shown) Monel® Monel® Monel® Hastelloy® C
7 Jam Nut Monel® B164 Monel® B164 Hastelloy® C B164 Hastelloy® C B574
8 Cap A216 GR. WCB Monel® A494 A216 GR. WCB Hastelloy® C A494
9 Gasket, Cap (not shown) Monel® Monel® Monel® Hastelloy® C
10 Cap Bolt A325 F468 A325 Hastelloy® C F468
11 Lever CS or Cast Iron CS or Cast Iron CS or Cast Iron CS or Cast Iron
12 Lifting Disc A479 316 SS Monel® B164 A479 316 SS Hastelloy® C B574
13 Adapter A479 316 SS Monel® B164 A479 316 SS Hastelloy® C B574
23 5
10
11 3
17
13 4
Specifications
Packed Lever D4 Trim SG Trim SS Trim
1 Yoke Duplex SS A216 GR. WCB A351 CF8M
2 Collar Duplex SS A479 316 SS A479 316 SS
3 Packing Graphite Graphite Graphite
4 Packing Gland Duplex SS A479 316 SS A479 316 SS
5 Shaft Duplex SS A479 316 SS A479 316 SS
6 Cotter Pin (not shown) Monel® CS 18-8 SS
7 Jam Nut Duplex SS A479 316 SS A479 316 SS
8 Cap Duplex SS A216 GR. WCB A351 GR. CF8M
9 Gasket, Cap (not shown) Monel® Monel® Monel®
10 Cap Bolt Monel® A325 F593 316 SS
11 Lever Duplex SS CS SS
12 Lifting Disc Duplex SS A479 316 SS A479 316 SS
13 Adapter Duplex SS A108 A479 316 SS
Test Gags
2
Gag Model For Valve Sizes
Figure 11
3
Part No. Part Name
1 Gag Screw Plug
2 Gasket Gag Screw
3 Cap, Packed or Screwed
4 Gag Rod (removed)
Figure 12
O-ring Material 2
°C
400
350 Max.
300 Min. 287
260
260
250 232 232
204
200 162
150 135
100
50
0
-28 -28 -28 -28 -28
-50
-53 -53
-100
-101
-150
-200
Aflas Buna-N Chemraz EPR Fluoraz Kalrez Silicone Viton
O-ring Material 2
Notes
1. For pressures below 100 psig [6.9 barg] con-
tact factory for material availability.
W ––––– –––––
√ √
A = –––––––––––––– W TZ 1.316W TZ
52.5 P1 K K n Ksh A = –––––––– –––– A = –––––––– ––––
CK P1Kb M CK P1Kb M
Liquids Notes
1.00
Back Pressure Correction Factor Kb
.90
.80
.70
.60
.50
.40
.30
.20
.10
0▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
▲
0 10 20 30 40 50 60 70 80 90 100
Back pressure, psia or bara
Back Pressure Percentage = x 100
Flowing pressure, psia or bara
Example:
Note
Set pressure = 200 psig [13.79 barg]
1. Valves must be set using the cold differential
Constant back pressure = 160 psig [11.03 barg]
set pressure (CDSP) to adjust for constant
160 + 14.7 back pressure.
Back pressure percentage (absolute) = –––––––––––––– x 100 = 74% or
200 + 20 + 14.7
11.03 + 1.013
–––––––––––––––––– = 74%
13.79 + 1.38 + 1.013
Factor Kb = 0.91 (follow dotted line from curve)
Note
1. Use Kb = 1.00 for 21% overpressure.
Note
Consult PRV Technical Manual for more detailed
sizing information and procedures.
Anderson Greenwood has proven capa- needs of your application. They are avail-
bilities in the development of Block Body able in materials such as Duplex, High
Pressure Relief Valves. These valves Temperature Alloys and 6MO.
provide for greater through-put and can
operate at set pressures higher than
traditional API 526 valves. These valves Please contact the factory or your local
are ideal for applications where there are representative for additional information.
extreme back pressure requirements or
to replace multiple high pressure valves
with fewer or in some cases a single
valve. Block body pressure relief valves
can be custom designed to meet the
Anderson Greenwood
P.O. Box 944
Stafford, Texas 77497, USA
Tel: (281) 274-4400
Fax: (281) 240-1800
International Tel: +1 281 274-4400
International Fax: +1 281 240-1800
Anderson Greenwood
Corrie Way, Bredbury Industrial Estate,
Stockport, Cheshire SK6 2ST, UK
Tel: 0161 494 5363
Fax: 0161 494 5672
International Tel: +44 161 494 5363
International Fax: +44 161 494 5672