Professional Documents
Culture Documents
Phaser 7800
Firmware Release 081.150.103.05600
Release Date: February 25, 2013 7800_081.150.103.05600
Purpose
This release provides the following resolutions:
This release also includes the following resolutions from prior releases:
The printer Front Panel and internal OS lock-up when connected to a network where IPv6 Multicast
Listener Discovery v1 (IPv6 MLDv1) is broadcast from the router.
Scaled graphics containing PANTONE Solid / Spot Colors will print with incorrect color.
Job Account Record in CentreWare Internet Services is reporting incorrect toner usage
Resolves a problem where the printer does not wake up and crashes or locks up from Power Saver mode
when a print job is sent, or when the printer Power Saver button is pressed on the control panel to wake it
up.
Resolves a problem where banner pages longer than 27 inches are incompletely printed in Enhanced
Print Quality mode.
Resolves a problem when printing on custom 17 inch size that cause printed images to shift on the page
(Service Bulletin T7913-06-03)
Resolves a problem where Automatic Supplies Replenishment data is not sent to the edge server
on a regular basis.
Resolves a problem where the Remaining and Warning state for the black toner amount is
incorrect.
Resolves a problem where a single booklet job with fold and staple will fold but not staple for
less than or equal to 100 copies.
Removed reference to AppleTalk in CWIS and Configuration Page since AppleTalk is not a
supported protocol in the Phaser 7800.
Installation Instructions
* Do not interrupt system once download is in process. Interruptions or loss of power may corrupt the engine
firmware and render the system temporary unusable. (Service repair may be required to return the system to
a working condition.)
* Some of the device’s settings may be changed from their present value back to the factory default values
by the firmware update. It is recommended customers save the configuration page and use it as a reference
to restore the device’s settings after the firmware update is complete.
Note: The System Software version currently installed is displayed on the left column on the first page, under
the Machine Information heading.