Professional Documents
Culture Documents
REPORT
E
Copyright
Disclaimer
The contents of this document are subject to revision without notice due to
continued progress in methodology, design, and manufacturing. Ericsson
shall have no liability for any error or damages of any kind resulting from the
use of this document.
Contents
1 Introduction 1
2 Revision Information 1
3 General Impact 6
3.1 Capacity and Performance 6
3.2 Hardware 7
3.3 Implementation 11
3.4 Interface 13
3.5 Memory 13
3.6 Operations 15
3.7 Other Features 15
3.8 Other Network Elements 15
4 Summary of Impacts 16
4.1 BSS Features 16
4.2 BTS Features 19
4.3 OSS Features 19
9 Glossary 120
10 References 123
1 Introduction
This document describes the impacts the new release, BSS R10 will have
on the BSS Product. BSS R10 contains the following; OSS-RC 1.1, BSC
R10 , BTS 10.1A, BTS 10.1B (RBS 2106/2206/2207/2308), BTS 10A
(RBS2101/2102/2202/2301/2302/2401), BTS 10A (RBS 200) and SMPC 6.0.
Note that a seperate NIR covering R10 NAED (North American Early Delivery)
covers the network impact from R9.1 to R10 NAED. This document covers the
network impact from BSS R9.1 to BSS R10.
The OSS-RC 1.1 consist of the GSM OSS and the CN-OSS. This is the first
merged product covering the Operation and Maintenance both for the Radio
Access Network and the Core Network. For the OSS user this involves some
changes and additions to the OSS GUIs. There are also changes in how to
handle the Network Elements in the OSS.
2 Revision Information
Table 1
Revi- Date Prepared Description
sion
A 2002-11-20 ENEILOR First version of BSS R10 NIR.
Approved by SYG.
Table 1
Revi- Date Prepared Description
sion
C 2003–03–22 EPKHASP Updated due to:
New SGSN version 5.5. Flexible
Positioning Support added. TRH
Capacity drop estimated to 5%.
Features delivered in BTS SW
10.1B clarified. OSS-RC 1.1
added. OSS Configurations
updated. Double DXU EDGE
described in more details.
Improved BTS alarms added.
Editorial changes
Table 1
Revi- Date Prepared Description
sion
E 2003–07–09 EPKHASP The main changes are:
RBS 2207 is added.
Compatibility with older BTS
R9 SW is changed (chapter
3.3). Parameter NOR5AINBSC
added (chapter 8.1.1). Note
added for GPRS/EGPRS in OL
subcell (chapter 5.7). Antenna
Hopping on Double DXU EDGE
solution is not supported. OMT
improvements are changed
(chapter 5.25).
Table 1
Revi- Date Prepared Description
sion
F 2003–10–17 EPKHASP The main changes are:
Compatibility with CGSN
2.1 changed to CGSN 3.0.
Chapter 8.2 (STS counter
changes) updated. Chapter 5.7
(Re-reservation of an existing
TBF) is clarified. Parameter
TN corrected in chapter 8.1.2.
Removal of results on SDCCH
in MRR is added in chapter
5.34. OMT Support for RBS
2x06 dual band configurations
added in chapter 5.25. Memory
requirements for APZ 212 20
and APZ 212 25 are clarified
(chapter 3.5). Mixed HW
configurations added in chapter
3.2.2. Recovery of EGPRS
Channels added in chapter
5.24. HW restriction added for
Self Configuring Transcoder
Pools (chapter 5.12.2). Chapter
3.3 updated regarding BTS
compatibility.
Table 1
Revi- Date Prepared Description
sion
H 2003–10–28 EPKHASP Description of the feature
Flexible SDCCH Allocation
updated (chapter 5.8)
3 General Impact
3.1.1 BSC
The CP capacity drop compared to BSC R9.1 with the BAS2 traffic model is
roughly 8% for APZ 212 20/25 and 3% for APZ 212 30. The higher impact
for APZ 212 25 and APZ 212 20 is due to the limited PS cache memory in
those processors. Note that the capacity drop depends on the traffic mix in
the network.
The TRH traffic capacity drop compared to BSC R9.1 is estimated to be 5% for
the BAS2 traffic model.
The PCU processor capacity is slightly decrased but the dimensioning rule that
the RPP can handle traffic on all supported GSL channels is not changed.
However since we so far have very limited experience from heavy live GPRS
traffic with R10 features like QoS Streaming the dimensioning rule may be
changed for the case with heavy traffic per GSL channel.
3.1.2 OSS
3.1.2.1 Configuration A
3.1.2.2 Configuration B
3.1.2.3 Configuration C
3.2 Hardware
3.2.1 BSC HW
Supported HW combinations are:
• APZ 212 20 in combination with IOG 20C (Both BYB 202 and BYB 501).
• APZ 212 25 in combination with IOG 20C (Both BYB 202 and BYB 501).
• APZ 212 30 in combination with IOG 20C (Both BYB 202 and BYB 501).
• APZ 212 25 in combination with IOG 20M, only for the one cabinet BSC
and BSC/TRC configurations (BYB 501 only).
• APZ 212 30 in combination with APG40.
• APZ 212 33C in combination with APG40.
• TRA R4, R5A and R5B in BYB 202.
• TRA R5A and R5B in BYB 501.
• TRA R6 in AXE 810
• RPD and RPG1 in BYB 202.
• RPP 202 and RPP 501 in BYB 202.
• RPP 501 in BYB 501.
• ETC4 in BYB 202.
• ETC5, ETC T1-H in BYB 501 and BYB 202
• ET155-7 in BYB 501.
• ET155-1 in AXE 810
• RPG3 in AXE 810 and BYB501
• RPG2 in BYB501
Note in BSS R10, support for NNRP4 is introduced. This process allows the
upgrade of BYB501 group switch to GS890(AXE810) group switch.
3.2.2 BTS HW
The RBS 2000 platforms are supported (RBS 2106, RBS 2206, RBS 2207,
RBS 2308 and older RBS 2000 platforms).
A new RBS 2207 is introduced in BSS R10 and is based mainly on the RBS
2206 platform. A maximum of 3 dTRUs will be supported. The software support
for RBS 2207 is introduced in BTS 10.1B.
The RBS 2308 is the new micro base station and is introduced in BSS R10 for
800, 900, 1800 and 1900 frequencies. The software support for RBS 2308 is
introduced in BTS 10.1B. For GSM 800 and GSM 1900, it is also possible to
run RBS 2308 with BTS SW 9.1C and 10.1A but in this case without support for
the feature Synchronised Radio Networks.
EDGE double TRU for 1800 MHz and 900 MHz are introduced (RBS 2106
and RBS 2206/2207).
A new internal Hybrid Combiner Unit (HCU) is introduced in RBS 2106 and
2206. The purpose is to be able to build large configurations with less number
of antennas and still support synthesised frequency hopping.
A new RBS configuration, Double DXU EDGE (for 1900 MHz only) is also
supported in BTS SW 9.1D. This allows DXU-21 + sTRU to be added to RBS
2202 and RBS 2102 to co-exist with the existing DXU-11 and non EDGE
TRUs in the same cabinet. These are considered 2 TGs by the BSC and are
connected via TG-SYNC. Note that the needed number of TGs per BSC will
increase due to the fact that each BTS where the mix configuration is introduced
need to have an extra TG to handle the new HW (i.e. DXU-21 with s-TRUs).
The maximum number of TGs that can be connected to a BSC is still 512.
The following features are impacted by the Double DXU EDGE configuration:
1) The feature AMR requires that all TRUs in a cell are capable of handling
AMR. When using the Double DXU EDGE configuration, the existing TRU’s
needs to be able to support AMR in order for the subcell to support AMR.
3) The feature Software Power Boost require an even number of TRXs to work.
The cTRU and sTRU can not be combined for this purpose. This means that an
even number of sTRUs/cell and an even number of cTRUs/cell are required.
See table 5 for further information regarding support for new R10 features.
Note that Mixed HW Configuration does not include any changes in the
operational documents in BSS R10.
Flexible SDCCH X X X X X
Allocation
Increased X X X X X
SDCCH
Capacity
AMR / AMR HR — X X1 X X2
IRC — — — X X
Antenna — — — — X
Hopping
IDB and HW — — — — X
Consistency
Check
Battery Test — X — X X3
Synchronised — — — X X
Radio Networks
EDGE (UL) — — — X X
Paging X X X X X
3.2.3 OSS HW
The following Sun Enterprise and Sun Fire servers/products are supported in
OSS-RC 1.1 provided that the network load is lower or the same as in R9.1.
• Sun StorEdge D1000/A1000 and A5200 disk system with disk capacity from
18/36 GB per disk and T3 disk system with 36 GB per disk
Old OSS HW may also be used. Please see Sales Configuration Guide for
OSS RC 1.1 for details.
3.3 Implementation
The following upgrade paths to BSS R10 are supported:
• MSC R9.1
• MSC R10/R3
• SGSN G 3.0
• SGSN R5.5
• CGSN G 3.0
3.4 Interface
All BSS interfaces have been updated to comply to 3GPP/GSM Release
4/December 2001. See Statement of Compliance (SoC) documents for more
information.
3.5 Memory
3.5.1 General
The memory estimate is based on BSS R9.1 with estimate on BSS R10
functionality added. The CP memory impact is estimated to an increase of
approx. 6–10 MW16.
The APZ memory limits are according to the table below. The maximum values
are specified and possible reduction steps within parenthesis.
*512 MW16 steps are valid for DRAM based boards, 32 MW steps are valid for
SRAM based boards (BSC only uses DRAM boards)
The processor is always equipped with 64 MW16 PS and 252 MW16 DS which
is enough to handle the largest TRC.
The minimum memory requirement for DS when using fixed SAE settings is
252MW16.
The processor is always equipped with 64 MW16 PS and 252 MW16 DS which
is enough to handle the largest BSC/TRC. See also chapter 3.5.4 for further
information regarding upgrade to BSC R10.
The processor is always equipped with 96 MW16 PS and 512 MW16 DS which
is enough to handle the largest BSC/TRC.
for APZ 212 20, this SAE reduction may not be enough for large switches and
further actions may be required. This has to be investigated for each case.
3.6 Operations
See each specific feature for a detailed description.
The Information Model Handler (IMH) in GSM OSS is restricted to use the US
ASCII character set with the following limitations: """, "*", ",", ";", "\", "<", ">",
".", "’", "%", "~", "(", ")", "&", "|", "?", "^”, ´“”, “‘” In OSS-RC only the following
characters are allowed: "A-Z", “a-z”, “0-9”, "-", “#”, "[]", "_" .
The consequence of this for the migration in OSS-RC is that if any characters
are used that are not allowed in OSS-RC, they will be substituted by "_". It is
therefore strongly recommended to change those characters before starting
the migration to OSS-RC since those characters are not allowed in OSS-RC
and consequently it’s impossible to import Network Elements and Sites into
OSS-RC containing those characters. If not done in advance it will for example
not be possible to reconnect the FM specific data (for example heart beat and
management groups) to the Managed element.
4 Summary of Impacts
This section is an overview of the impact the features have on the system. If
a feature is classified as ’major’ it means that new hardware is needed before
the feature can be used. Major can also mean that the feature affects other
features or has impact in other ways on the system. For details of the impact,
see each feature description.
By combing the frequency bands within the same cell it is possible to achieve
further network integration. The traffic can be increased in the frequency
band without BCCH (one extra TCH) and there will be less neighbouring cell
relations. The radio interference in the non-BCCH band will be less (the BCCH
always transmits with maximum output power) and the reuse of frequencies
can be tighter.
The Multi Band Cell solution in BSS R10 allows different frequency bands in
different subcells. A maximum of two bands per cell is supported. Subcell
load distribution is utilised to distribute circuit switched traffic between the
frequency bands.
The number of cell relations will be reduced in a Multi Band Cell network
compared to a traditional ’dual-band site’ network with multiple frequency
bands. The amount of inter cell handovers are expected to be reduced since
the same cell can handle more than one frequency band. The amount of intra
cell handovers are expected to be increased.
Less number of cells in an area will result in larger cells with respect to the
number of TRX per cell. Less paging load is expected due to this and also
higher traffic levels can be achieved at the same congestion level.
5.1.2 Hardware
No impact.
5.1.3 Implementation
No impact.
5.1.4 Interface
5.1.5 Memory
No impact.
5.1.6 Operations
The following new OPIs are introduced,’ BSC Multi Band Cell, Initiate’ and
’BSC Multi Band Cell, End’.
The following OPIs are updated, ’BSC Cell System Information Data Change’
and ’BSC, Internal Cell Data, Change’.
The following commands are modified following the introduction of this feature,
RARDC, RLCFI, RLDGE, RLDGI, RLDEC, RLDGC, RLOLC, RLLOC, RLHPC
and RLHPP.
The following printout descriptions are modified, ’ Cell Channel Group Data’,
’Cell Locating Data’,’Cell Resources’,’CERFIL’, ’CTRFILE’, ’MTRFILE’.
PMR, BSM, CNA and CNAI in OSS are modified to support Multi Band Cell.
No Impact.
5.2.2 Hardware
No impact.
5.2.3 Implementation
No impact.
5.2.4 Interface
The following OSS External Interfaces are impacted,
5.2.5 Memory
No impact
5.2.6 Operations
Operator must specify the new thresholds for AMR FR.
The following OPI are updated due to this feature, ’BSC, Cell Locating Data,
Change’.
The following printout description are updated, ’Cell Locating Intracell Handover
Data’
AMR is required.
No impact.
5.3.2 Hardware
No Impact.
5.3.3 Implementation
No Impact.
5.3.4 Interface
5.3.5 Memory
No impact
5.3.6 Operations
The following OPIs are updated, ’BSC, Dynamic MS Power Control Cell Data,
Change’, ’BSC, Dynamic Mobile Subscriber Power Control, Activate’ and ’BSC,
Dynamic Mobile Subscriber Power Control, Deactivate’.
5.4.2 Hardware
No impact.
5.4.3 Implementation
No impact.
5.4.4 Interface
5.4.5 Memory
No impact
5.4.6 Operations
A new OPI, ’BSC, AMR Power Control Cell Data, Change’ is introduced and the
OPI ’ BSC, Internal Cell Data, Change’ is updated.
The operator must purchase the optional features, Dynamic BTS Power Control
and Dynamic MS Power Control before using this feature.
NACC will reduce the service outage time on Intra-BSC cell change from
1–5seconds down to 0.3–1 seconds for Release 4 compliant mobiles. This
For non-release 4 GPRS mobiles that support the message PACKET PSI
STATUS (3GPP 44.060) the NACC feature will reduce the service outage
time at cell change although the reduction will not be as high as for NACC
supporting Release 4 mobiles.
5.5.2 Hardware
No Impact.
5.5.3 Implementation
No Impact
5.5.4 Interface
The Um interface is affected.
5.5.5 Memory
No Impact.
5.5.6 Operations
The following application information is updated, ’ROEPC’.
NWS CNA and CNAI in OSS are updated to support this feature.
New attributes are introduced in the standard for the QoS streaming class,
Transfer delay, Guaranteed Bit Rate (GBR) and SDU format. GBR is the
requested bitrate on LLC level and is the only new supported attribute in BSS
R10. GBR is only supported in the downlink direction. Although a streaming
application may run on an interactive bearer, it is this new attributes which
enables the QoS Streaming user to secure resources with the necessary bitrate
for a streaming application.
It is assumed the user has already activated a PDP context when wanting to
initiate a streaming application. A secondary PDP context is activated and
PDCHs are reserved for the streaming application. These PDCHs are marked
for streaming and may not be used by any other streaming user. However
interactive and background users may be multiplexed on these PDCHs. The
number of actual reserved PDCHs will be determined by GBR, CS load, number
of channels occupied already by other streaming users and by a bitrate/PDCH
parameter, settable by the operator to control coverage of streaming services in
the cell. If the streaming user does not get the requested resources, attempts
are made to upgrade the number of PDCHs to the user. If this is successful
then a re-negotiation of GBR is performed. If the MS moves to a cell with higher
capabilities than the old one, the BSS shall request the SGSN to make a
download of the original ABQP to re-negotiate the PFC to ensure the highest
possible bitrate for each cell is achieved.
The operator can choose if PDCHs allocated by a streaming user are allowed
to be pre-empted by circuit switched traffic or not.
5.6.2 Hardware
No Impact
5.6.3 Implementation
No Impact
5.6.4 Interface
5.6.5 Memory
No Impact
5.6.6 Operations
The following OPIs are updated due to this feature, ’BSC, General Packet Radio
Service Quality of Service, Change’, ’BSC, General Packet Radio Service
Quality of Service, Activate’ and ’BSC, General Packet Radio Service Quality of
Service, Deactivate’.
The following new printout descriptions are introduced, ’CELL GPRS Quality
of Service Data’.
The following Application information is updated, ’RCS GRC Radio Link Control
Changeable Exchange Adaptation’.
CNA, CNAI, SDM and NWS in OSS are updated to support this feature.
The features, GPRS and GPRS Quality of Service and Scheduling, are required
in order to use this feature.
This is a mechanism to keep a TBF alive when expecting more downlink data to
arrive that will reduce frequent TBF setup / releases. With this, the throughput
is improved, especially for ’bursty’ traffic such as web browsing and E-mail etc.
With this enhancement the TBFs are changed in accordance with the
applications needs. If the main direction of application transfer is in uplink then
the downlink TBF is downgraded and the uplink TBF is upgraded.
TBF Upgrading:
For TBFs running on fewer than requested PDCHs, PDCHs are added to the
reservation without moving the TBF.
This feature enables an existing TBF to be moved from channels that don’t
fulfill the requirements of the TBF to channels that better correspond to the
requirements. This will result in better utilisation of the PDCHs as the traffic
load will be more evenly distributed within the cell. Note that re-reservation of
an existing TBF is only supported within a certain TBF mode.This means that
the TBF mode will not be changed at re-reservation.
Prior to BSS R10 GPRS/EGPRS was only supported in the underlaid subcell.
With this feature the possibility to utilise GPRS/EGPRS in an overlaid subcell is
introduced. This is important for configurations where limited number of TRUs
are used within an underlaid subcell. Used together with the feature Multi Band
Cell, GPRS/EGPRS shall be supported no matter which subcell or frequency
band the BCCH is allocated. Similarly when used together with the feature
BCCH in Overlaid Subcell, GPRS/EGPRS can be supported in an overlaid
subcell in which a BCCH is allocated.
5.7.2 Hardware
No Impact.
5.7.3 Implementation
Radio Network planning should consider that the overlaid subcell coverage
should be at least the same as the underlaid subcell coverage when
GPRS/EGPRS in Overlaid Subcell is utilised. Radio Network planning is
required to tune the cell reselection parameters.
5.7.4 Interface
The UM interface is impacted.
5.7.5 Memory
No Impact.
5.7.6 Operations
The following new OPIs are introduced due to this feature, ’BSC, Packet
Specific Cell Plan Data, Change’,
The following printout descriptions are introduced to support this feature ’Packet
Neighbour Relation Data’ and ’Packet Specific Cell Plan Data’
CNA, CNAI and NWS in OSS are modified to support this feature.
If this is used together with the feature Multiband Cell, GPRS/EGPRS will be
supported no matter in which subcell or frequency band the BCCH is allocated.
Also with this feature, it shall be possible to use GPRS/EGPRS together with
the feature BCCH in Overlaid Subcell.
In the radio base station there is not a one-to-one relation between a transceiver
and what is transmitted on the air-interface (carrier). In order to optimize
the hardware and A-bis link utilization, the BSC will automatically spread
the SDCCH/8 between all possible transceivers to distribute the load. The
inter-transceiver bus (also used for baseband frequency hopping) is used to put
the information onto the correct carrier. The consequence of this is that if, for
example eight SDCCH/8 timeslots are required on a carrier, then at least two
transceivers carrying four SDCCH/8 each are needed.
Note that Flexible SDCCH Allocation does not increase the total number of
SDCCH that can be configured in a cell, instead it enhances the flexibility of
where to put them. If additional SDCCH capacity is required then the feature
FAJ 121 355 Increased SDCCH Capacity should be used.
Multiple SDCCH/8 per transceiver is also needed when the feature FAJ 121
355 Increased SDCCH Capacity is used.
The possibility for the operator to allocate SDCCH capacity per cell is introduced
as follows,
The number of TRX per RPG3, RPG1/2 and RPD (TRH capacity) is reduced
due to the increase of the number of SDCCH/8s per TRX.
The operator will be able to set, with an exchange property, the number of
SDCCH/8s per TRX possible to configure in the BSC. The following table
describes the impact.
5.8.2 Hardware
No Impact.
5.8.3 Implementation
No Impact.
5.8.4 Interface
The following OSS External Interfaces are impacted,
5.8.5 Memory
No Impact.
5.8.6 Operations
The following OPIs are updated due to this feature; ’ BSC, Adaptive
Configuration of Logical Channels, Change’, ’BSC, Cell Description Data’.
The following printout descriptions are updated, ’Cell Adaptive Logical Channel
Configuration’, ’Cell Configuration Frequency Data’, ’Cell Configuration
Frequency Hopping Data’.
CNA, CNAI and BSM in OSS are modified to support this feature.
This feature can be extended with more signalling capacity in a cell with the
optional feature, Increased SDCCH Capacity.
The channel quality for HR calls shall be continuously supervised. Two new
quality thresholds are introduced, one for AMR and one for non-AMR calls to
determine when a change of channel rate HR to FR is preferred in order to
obtain better speech quality.
This feature allows the operator the possibility to improve the call capacity per
cell by efficient use of HR and AMR-HR.
5.9.2 Hardware
No Impact.
5.9.3 Implementation
No Impact.
5.9.4 Interface
The following OSS External Interfaces are impacted;
5.9.5 Memory
No Impact.
5.9.6 Operations
The following new OPI is introduced, ’BSC Cell Dynamic FR/HR Mode
Adaptation Data Change’.
The following printout descriptions are updated, ’Cell Dynamic FR/HR Mode
Adapation Data’, ’CTRFILE’, ’ MTRFIL’, ’CERFIL’.
NWS, PMR, CNA and CNAI in OSS are updated to support this feature.
The features AMR and AMR-HR are required in order to utilise the AMR
parameters/thresholds.
5.10.2 Hardware
No Impact.
5.10.3 Implementation
No Impact.
5.10.4 Interface
5.10.5 Memory
No Impact.
5.10.6 Operations
The following new OPI is introduced, ’BSC, MS Queuing, Change’.
This feature can be combined with Differential Channel Allocation (DCA) . This
allows operators to reserve part of the cell for priority users, resulting in these
users gaining access to the cell even though ordinary users will experience
congestion. When all channels in the best cell are occupied then incoming calls
will be handled according to the rules of Call Queuing.
Similarly this feature can be used together with eMLPP. In this case a priority
user shall attempt to pre-empt other users to gain access to the cell. If this is
not possible (no other active calls are of type permitting pre-emption) then
incoming calls will be handled according to the rules of Call Queuing.
This feature is valuable for operators with a limited set of frequencies as well
as for operators with high traffic load.
In the synchronised radio network, the base stations are frame synchronised
to a nominal position so that bursts are aligned and transmitted at the same
time in different cells. The nominal position is calculated by the base station
with the aid of a synchronisation reference. The alignment of bursts introduces
the possibility to tighten the frequency reuse. The performance and capacity of
such a network are limited by interference between cells, so mechanisms such
as planning of MAIO and TSC should be utilised to reduce the interference.
The sychronised radio network is fault tolerant and has built in recovery
mechanisms. The base station is able to maintain frame synchronisation even
when synchronisation information is temporarily unavailable, e.g. due to GPS
satellite shadow. For longer interruptions in synchronisation information the
BTS shall still provide service by choosing a back up synchronisation source.
Note that this combination of a primary synchronisation source and backup
synchronisation source shall lead to improved ISP compared to base stations
with a single synchronisation source.
Note that the support for Synchronised Radio Networks on the RBS PPC
platform is provided in BTS software 10.1B.
5.11.2 Hardware
RBSs must be connected with a GPS synchronisation source. RBS 2308 and
RBSs in the RBS 2000 family equipped with DXU-21 are supported.
5.11.3 Implementation
No Impact.
5.11.4 Interface
Updates are made to the Abis Interface.
5.11.5 Memory
No Impact.
5.11.6 Operations
The following new OPIs are introduced to support this feature, ’Radio X-Ceiver
Administration, Transceiver Group Frame Synchronisation using GPS’, ’Radio
X-Ceiver Administration, Transceiver Group Frame Synchronisation using
GPS Fault, Repair’ and the following OPIs are updated, ’Radio X-Ceiver
Administration, Transceiver Group Synchronisation Fault, Repair’ and ’Radio
X-Ceiver Administration, Transceiver Group Synchronisation’.
CNAI, BSM and CNA in OSS are updated to support this feature.
This feature can be used in conjunction with the feature IRC to improve
downlink interference suppression by 2–3dB.
This feature can be used in conjunction with the feature SAIR to improve uplink
interference suppression by 2–3dB.
commands to, re-define, load with new codec SW, and move to new pool, the
required transcoder resources. Only ’free’ transcoder resources within the
pool shall be moved.
By utilising this feature the operator will experience simplified O&M of the
Transcoder Pools, have automatic pool redimensioning to match the subscriber
profile, handling situations such as the phased introduction of AMR mobiles in
the market and the possibility to order re-configuration to handle cases where
one pool has reached congestion, eg more HR required during peak busy hour.
5.12.2 Hardware
TRA R6, TRA R5A and TRA R5B are supported.
Note that the feature do not support a mix of TRA R5A and TRA R5B equipment
if AMR is activated in the BSC. This is due to that the TRA R5A equipment
do not support AMR.
5.12.3 Implementation
No Impact.
5.12.4 Interface
No Impact.
5.12.5 Memory
No Impact.
5.12.6 Operations
The following new OPIs are introduced, ’ Radio Transmission Transcoder
Pool Self-Configuration Timeout’, ’Radio Transmission Transcoder Pool Self
Configuration, Initiate’, ’Radio Transmission Transcoder Pool Self Configuration,
END’. The following OPIs are updated, ’Radio Transmission Transcoder Pool,
Change’, ’Radio Transmission Transcoder Pool, Initiate’, ’Radio Transmission
Transcoder Pool, End’, ’Radio Transmission Transcoder Pool Idle Level
Superivision, Initiate’.
The following new print out descriptions are introduced, ’Radio Transmission
Transcoder Pool Self Configuration’, ’Radio Transmission Transcoder Pool Self
Configuration Data’, ’Radio Transmission Transcoder Pool Self Configuration
Timeout’, ’Radio Transmission Transcoder Pool Change Log’.
A new alarm is added that will be send from the BSC and checked by OSS,
which shall trigger the OPS scripts to be executed.
5.13 AMR HR
The feature Adaptive Multi Rate Half Rate (AMR HR)introduces a new speech
codec type (AMR HR) which adapts the speech codec rate and channel coding
according to the radio environment. AMR HR allows the operator to enhance
capacity at retained speech quality in the radio network i.e. a speech quality
better or equal to FR. By combining AMR HR with features such as AMR Power
Control, Dynamic FR/HR Adaptation and Dynamic HR Allocation, the operator
can fully utilise the capacity benefit of using the HR channel.
AMR HR gives twice the capacity as FR with the same or better speech quality.
Similarly use of HR also reduces the transmission costs on Abis.
5.13.2 Hardware
TRA R5B or TRA R6 (part of AXE 810) are required to be able to use AMR HR.
See Table 5 for RBS support.
5.13.3 Implementation
No Impact.
5.13.4 Interface
Updates are made to the A-Interface, A-ter, Abis, Um and TRA-BTS Interface.
5.13.5 Memory
No Impact.
5.13.6 Operations
See feature AMR. New optional feature parameter specific for AMR-HR added,
application information ’ROEPC’ updated to reflect this.
Real Time Event Data is also updated to support Multi Band Cells (by
monitoring of the Frequency Band Offset for Multiband Cells).
This feature impacts CP load. Depending on the number of events and number
of cells that are to be monitored, the CP capacity drop will vary.
All event handling in the BSC are treated with lower priority than than traffic
handling to minimize disturbances to CS and PS traffic capacity. The additional
BSC CP load is estimated to 12% relative load increase with all events active.
This is a relative load increase of approx. 3% compared to BSS R9.1. When
events are dropped due to high load in the BSC, OSS is informed.
This feature also impacts OSS load. Approx 11–12% of the CPU capacity is
used by the R-PMO application when running 3000 cells (à 3 erlang). The
memory consumption is maximum 1.5Gb when running all reports for the whole
network.
The load on the TCP/IP link between BSC and OSS is estimated to maximum
220kbit/s.
5.14.2 Hardware
No new hardware needed in BSS R10. Same hardware requirements as
per R9.1 are still valid for this feature, i.e. additional hardware in the BSC
called STOC is required. STOC is regional processor based, running on
RPG-2E/RPG3 for BYB501 BSCs and RPG3 for AXE810 BSCs. It allows the
BSC to be connected to a TCP/IP channel.
5.14.3 Implementation
No Impact.
5.14.4 Interface
The OSS-BSC (RNX-BSC) interface is updated to support the new monitors.
5.14.5 Memory
No Impact.
5.14.6 Operations
The following command descriptions are updated due to this feature, ’RAPMI’
and ’RAPME’.
This feature should be used in conjunction with the OSS feature, GSM
Real-time Performance Monitoring (R-PMO).
5.15 EGPRS
The feature EGPRS is enhanced to provide support for all MCSs in uplink. Link
Adaptation support in uplink is also introduced.
Support for 900/1800Mhz frequency bands is also introduced for the EDGE
double TRU.
By supporting all MCSs in uplink together with link adaptation higher throughput
is achieved in UL. Overall better performance is achieved as the data throughput
in UL is adapted to the quality of the radio environment.
5.15.2 Hardware
DXU-21 with EDGE sTRU or EDGE dTRU is required (see table 5).
The new RBS configurations, Double DXU EDGE and Mixed HW Configuration
are supported. This configuration allows EDGE to be supported on the RBS
2202 / RBS 2102.
EDGE double TRU for 1800 Mhz and 900 Mhz is introduced.
5.15.3 Implementation
No Impact.
5.15.4 Interface
5.15.5 Memory
No Impact.
5.15.6 Operations
The following application information is updated to support the enhancements,
’ROEPC’.
CNAI, CNA and NWS in OSS are updated to support the enhancements.
Path Loss and Timing Advance thresholds only take the serving BTS into
consideration to ensure the MS does not get too far away from the BTS. In a
high capacity area this is not sufficient as interference is the biggest problem
in these areas and not signal strength. BTSs are usually transmitting at high
power to ensure indoor coverage, resulting in high signal strength at the cell
borders. Due to high frequency utilisation in high capacity areas the MSs at the
cell borders can remain using the wrong channel in the wrong place generating
and receiving interference. The DTCB threshold ensures that an MS shall not
become too close to a neighbour cell, avoiding this interference. The DTCB
and path loss thresholds are configured for each cell. When a threshold is
exceeded for an MS, a handover is initiated to a subcell fulfilling all thresholds.
This enables the operator to optimise the frequency reuse of each subcell ,
insuring maximum capacity while maintaining good speech quality in the area
covered by that subcell.
No CP Impact.
5.16.2 Hardware
No Impact.
5.16.3 Implementation
No Impact.
5.16.4 Interface
The following OSS External Interfaces are impacted,
5.16.5 Memory
No Impact.
5.16.6 Operations
The application information ’ROEPC’ is updated to support this feature.
The following printout descriptions are updated, ’Cell Locating Overlaid Subcell
Data’, ’CTRFILE’, ’MTRFIL’, ’Mobile Traffic Recording Event Report’.
The following application informations are updated, ’RCS Cell Load Sharing
Changeable Exchange Adaptation’ and ’ RCS, RCQS Cell Data Changeable
Exchange Adaptation’.
CNA, CNAI, PMR and NWS in OSS is updated to support this feature.
No Impact.
5.17.2 Hardware
No Impact.
5.17.3 Implementation
No Impact.
5.17.4 Interface
The following OSS External Interfaces are impacted,
5.17.5 Memory
No Impact.
5.17.6 Operations
The following new OPI is introduced, ’BSC Cell Dynamic HR Allocation Data
Change’.
The application information for ’RCCD’, ’RNLCT’ and ’ROEPC’ are updated
due to this feature.
CNAI and CNA in OSS is updated to support the enhancements to this feature.
No Impact.
5.18 AMR
The feature AMR is enhanced to provide the operator with improved AMR
counters, together with OSS support which allow the operator to fine tune the
AMR feature to their particular radio environment. Codec Mode Utilisation
counters provide information on usage of the different codec modes within the
codec set. As the modes are adapted according to the radio conditions (C/I) a
picture of the cell performance can be made. Erased frame and total number
of frame counters are introduced for all codec modes within the HR and FR
defined Active Codec Sets (ACS). These counters are also introduced for FR
SPV1, FR SPV2 and HR SPV1. These counters can be used by the operator
to calculate the Frame Erasure Rate (FER) which gives an indication of the
speech quality in the cell. Separate drop call counters are introduced for AMR
FR and AMR HR calls, to distinguish them from existing FR/HR dropped calls.
Using the above counters the operator can fine tune the AMR parameters for
the BSC. To facilitate this new operator settable parameters are introduced for
setting the codec modes within the active codec set together with the thresholds
and hysteresis values to determine when to change codec mode. The two
predefined ACSs for AMR-FR and two for AMR-HR introduced in BSS R9.1 will
remain unchanged. These will be joined by two new user defined ACSs for
AMR-FR and two new ACSs for AMR-HR.
The AMR feature is introduced on new hardware platforms in BSS R10, with
support for RBS 2000 (except RBS2301<R6A) and TRA R5B.
The enhancements allow the operator to fine tune the AMR performance. Using
AMR in combination with features such as AMR Power Control, Dynamic FR/HR
Mode Adaptation and Dynamic HR Allocation provide increased capacity while
maintaining good speech quality.
5.18.2 Hardware
AMR is supported on the following TRA platforms,
TRA R6
TRA R5B
Note that all TRUs in the same subcell must be AMR capable in order to
support AMR in that subcell.
5.18.3 Implementation
No Impact.
5.18.4 Interface
Updates are made to the Abis interface.
5.18.5 Memory
No Impact.
5.18.6 Operations
CNA, CNAI and NWS in OSS are updated to support the enhancements to
the AMR feature.
5.19.2 Hardware
No Impact.
5.19.3 Implementation
No Impact
5.19.4 Interface
The Abis interface is updated to support this feature.
5.19.5 Memory
No Impact.
5.19.6 Operations
The following Speech Quality Reports are modified to include AMR FR and
AMR HR.
A new counter for the number of measurement reports from Half Rate
connections.
5.20.2 Hardware
No Impact.
5.20.3 Implementation
No Impact.
5.20.4 Interface
No Impact.
5.20.5 Memory
No Impact.
5.20.6 Operations
The following OPI is updated to support this feature, ’BSC, Active BA-List
Recording Definition, Initiate’.
The following printout descriptions are updated, ’BSC, Active BA-List Recording
Definition Data’, ’Active BA-List Recording Result’, ’BARFIL’.
Traffic downtime for a large restart in the BSC is reduced by on average of 25s
(dependent on APZ type and size of BSC Node).
Note that System Start and Large Restart with Reload are not impacted by
this feature.
5.21.2 Hardware
No Impact.
5.21.3 Implementation
No Impact.
5.21.4 Interface
No Impact.
5.21.5 Memory
No Impact.
5.21.6 Operations
No Impact.
The single slot TCH allocation strategy with quality consideration is based on
the R9.1 allocation strategy but also taking MAIO into consideration. Operators
should select this when channel quality is the most important criteria.
The single slot TCH allocation strategy with MAIO consideration is aimed at tight
frequency reuse networks (especially 1/1) where the most important criteria is
to minimise interference from co-channels and adjacent channels within and
between cells. MAIO offsets the synthesizer hopping sequences to obtain the
least amount of interference. For this strategy the MAIO is considered before
quality for single slot TCH allocation.
The single slot TCH allocation strategy with multislot consideration leaves as
many idle channels free as possible for multislot calls, increasing the probability
for consecutive channels being available for multislot traffic. For this strategy
multislot is considered ahead of quality.
The TCH allocation strategy is chosen on channel group level. The channel
allocation algorithm shall choose channel groups with the strategy ’TCH
Allocation with Multislot consideration’ as a last option in the cell when allocation
single slot connections. This results in more TCHs available in the channel
groups with multislot consideration strategy for mulitslot connections. Also
this enables the operator to have different frequency planning for that channel
group that shall mostly carry PS traffic.
The strategies are selectable by the operator by command. The default strategy
is Single Slot TCH Allocation with Quality Consideration.
5.22.2 Hardware
No Impact.
5.22.3 Implementation
No Impact.
5.22.4 Interface
The following OSS External Interfaces are impacted;
5.22.5 Memory
No Impact.
5.22.6 Operations
The following new OPI is introduced to support this feature, ’BSC, Cell Channel
Group Allocation Data, Change’.
The following new commands are introduced to support this feature, ’RLGAC’
and ’RLGAP’.
The following new printout is introduced, ’Cell Channel Group Allocation Data’.
5.23.2 Hardware
The APZ 212 33C substitutes APZ 212 25 and APZ 212 30 for new node
deliveries.
The APZ 212 33C can also be used for APZ upgrade of APZ 212 25/IOG 20 to
APZ 212 33C/APG40 in the installed base of BYB 501.
5.23.3 Implementation
No Impact.
5.23.4 Interface
No Impact.
5.23.5 Memory
See chapter 3.5.
5.23.6 Operations
No Impact.
5.24.2 Hardware
No Impact.
5.24.3 Implementation
No Impact.
5.24.4 Interface
No Impact.
5.24.5 Memory
No Impact.
5.24.6 Operations
The following OPIs are introduced to support this feature ’Radio Transmission,
PCU Configurations, Change’, ’Radio Transmission, Packet Control Unit,
Connect’.
No Impact.
Adapt default value to recommended value for T3105 — The Timer T3105
indicates the time between repetition of physical information messages
during the handover procedure. The default value is changed to match the
recommended value (from 6 to 8).
OMT Support for RBS 2x06 dual band configurations — Support for 900/1900
dual band RBS 2106 and RBS 2206 configurations will be implemented in the
OMT. The support will be delivered in BTS SW 10.1B.
5.25.2 Hardware
See Table 5 for RBS HW support for RBS impacting improvements.
5.25.3 Implementation
No Impact.
5.25.4 Interface
No Impact.
5.25.5 Memory
No Impact.
5.25.6 Operations
The application information for ’ROEPC’ is updated with the new T3105 default
timer value.
No Impact.
No Impact.
5.26.2 Hardware
No Impact.
5.26.3 Implementation
No Impact.
5.26.4 Interface
The following external interfaces in OSS are updated,
5.26.5 Memory
No Impact.
5.26.6 Operations
The following command descriptions are updated to support this feature,
’RLCHC’, ’RLSLC’, ’RLDEC’.
No Impact.
5.27.2 Hardware
No Impact.
5.27.3 Implementation
No Impact.
5.27.4 Interface
5.27.5 Memory
No Impact.
5.27.6 Operations
The following command descriptions are updated to support this feature,
’RLCFI’, ’RLCFE’.
The increase in SDCCH/8s defined per cell require more SDCCH/8s on each
TRX. This will reduce the capacity of the RPD/RPG. This shall be configurable
by the operator. See feature Flexible SDCCH Allocation for more details.
5.28.2 Hardware
No Impact.
5.28.3 Implementation
No Impact.
5.28.4 Interface
The following OSS External Interfaces are impacted,
5.28.5 Memory
See feature Flexible SDCCH Allocation.
5.28.6 Operations
CNA, CNAI and BSM in OSS are updated to support this feature.
5.29 Locating
The feature, Locating, provides the basis for handover decisions in BSS. It is
controlled via parameters and works out the cell selection for active MSs. In
BSS R10 this feature is enhanced to include new bad quality parameters for
AMR mobiles. This allows the operator to benefit from the increased robustness
associated with AMR-FR by setting separate bad quality thresholds and higher
Rxqual values before a bad quality urgency handover is performed for these
mobiles.
5.29.2 Hardware
No Impact.
5.29.3 Implementation
No Impact.
5.29.4 Interface
The following OSS External Interfaces are impacted,
5.29.5 Memory
No Impact.
5.29.6 Operations
The following OPI is updated due to this feature ’BSC Cell Neighbour Relation
Data, Change’.
The following printout descriptions are updated, ’Cell Locating Urgency Data’
and ’Neighbour Relation Data’.
No Impact.
5.30 Paging
The feature Paging is used when a mobile terminated call is to be set up to
search for the mobile within the Paging Area, and to order the MS to initiate
the connection. In BSS R10 this feature is enhanced by introducing two new
counters for detecting PCH congestion. The first counter, counts, per cell,
the number of discarded pages due to full Paging Queue in the BTS. The
second counter, counts, per cell, the number of discarded pages due to age.
These two counters provide the operator with a truer representation of paging
congestion situations. By providing the operator with a proper information of
paging congestion situations the operator can take actions to improve paging
performance.
5.30.2 Hardware
No Impact.
5.30.3 Implementation
No Impact.
5.30.4 Interface
5.30.5 Memory
No Impact.
5.30.6 Operations
NWS in OSS are updated to support this feature.
No Impact.
No Impact.
5.31.2 Hardware
No Impact.
5.31.3 Implementation
No Impact.
5.31.4 Interface
No Impact.
5.31.5 Memory
No Impact.
5.31.6 Operations
The following OPIs are updated to reflect the enhancements to the feature,
’BSC, General Packet Radio Service Quality of Service, Change’, ’BSC,
General Packet Radio Service Quality of Service, Activate’, ’BSC, General
Packet Radio Service Quality of Service, Deactivate’.
The Capacity of one 1.5 Mb/s ANSI HSL link using ATM will be approximately
equal to the capacity of 13 56 kb/s signalling links.
No Impact on CP load.
5.32.2 Hardware
RPP is required to support the HSL feature. Each RPP can administrate one
high speed signalling link. APZ 212 20 with serial RP bus, APZ 212 25 , APZ
212 30 and APZ 212 33C support HSL.
5.32.3 Implementation
One serial RP-Bus branch can handle upto 3 HSLs when no other RPs are
connected to it.
It is recommended to have at least two HSLs in the BSC working side by side
for redundancy reasons.
5.32.4 Interface
HSL impacts the A-Interface.
5.32.5 Memory
No Impact.
5.32.6 Operations
All devices within the HSL need to be defined to obtain HSL.
No Impact.
Antenna hopping is seen as particularly beneficial for cells where the non-BCCH
channel group is using synthesizer hopping (and FLP). The BCCH carrier also
benefits from antenna hopping in this configuration.
5.33.2 Hardware
5.33.3 Implementation
No impact.
5.33.4 Interface
No Impact.
5.33.5 Memory
No Impact.
5.33.6 Operations
The following command descriptions are updated to support this feature,
’RXMOC’, ’RXMSC’.
No impact
The measurement results collected while the connection is on the SDCCH are
completely removed from the Measurement Result Recording (MRR). This
means that only connections on TCH is recorded and counted by the counters
in MRR. Note that this may have an impact on the MRR statistics. For example,
a sudden change of measured RxQual might be seen when upgrading to BSS
R10. This is due to that counters are based on measurements on TCH and
SDCCH before the upgrade while after the upgrade, only TCH measurements
are considered.
5.34.2 Hardware
No Impact.
5.34.3 Implementation
No Impact.
5.34.4 Interface
No Impact.
5.34.5 Memory
No Impact.
5.34.6 Operations
The following OPI is updated to support this feature, ’BSC, Measurement Result
Recording Definition, Initiate’.
All counters including the new counters introduced in BSS R10 can be
supported.
5.35.2 Hardware
No Impact.
5.35.3 Implementation
No Impact.
5.35.4 Interface
No Impact.
5.35.5 Memory
No Impact.
5.35.6 Operations
No Impact.
The capacity limit of the Subrate Switch (SRS) in the GS12 will be removed.
For ET155–7 connected to GS12 there are restrictions not to use all devices
in order to avoid group switch congestion. The GS890 is a congestion-free
group switch. This means that increased capacity will be obtained for ET155–7
after group switch upgrade. The capacity will be increased from 1736 to 1953
circuits per ET155.
5.36.2 Hardware
GS890 is added to the group switch in BYB 501. The BYB 501 group switch
remains connected to existing hardware, eg. TRA R5B, RPG2. The GSS 890
can then have APT 1.5 hardware connected to it, eg TRA R6, RPG3, ET155–1.
5.36.3 Implementation
NNRP-4 process is used for GS conversion.
5.36.4 Interface
No Impact.
5.36.5 Memory
The GS890 requires more CP DS memory than the GS12 group switch. An
additional 7 MW16 per GEM magazine is required. This has to be considered for
APZ 212 25 and 212 20 processors where DS memory may be a limiting factor.
5.36.6 Operations
No Impact.
5.37.2 Hardware
No Impact.
5.37.3 Implementation
No Impact.
5.37.4 Interface
No Impact.
5.37.5 Memory
No Impact.
5.37.6 Operations
The application information ’ROEPC’ is updated to support this feature.
5.38.2 Hardware
No Impact.
5.38.3 Implementation
No Impact.
5.38.4 Interface
5.38.5 Memory
No Impact.
5.38.6 Operations
The SMPC tool is updated with a new graphical user interface and it will also be
supported using any Netscape browser.
5.39.2 Hardware
No Impact.
5.39.3 Implementation
No Impact.
5.39.4 Interface
No impact.
5.39.5 Memory
No Impact.
5.39.6 Operations
No impact.
The OSS features Frequency Allocation Support FAJ 122 474 and Frequency
Optimisation Expert (FOX) FAJ 122 629 will increase the value of this feature.
The improvement in OSS is that support for Multi Band Cell has been added.
No CP impact.
6.1.2 Hardware
RBS 2102 and RBS 2202 together with DXU-21 and sTRU are supported. RBS
2308, 2106 and RBS 2206/2207 are also supported.
6.1.3 Implementation
No Impact.
6.1.4 Interface
BTS-BSC interface updated to support enabling/disabling IRC.
6.1.5 Memory
No impact.
6.1.6 Operations
The BSC command, RLDEC is modified to include the IRC parameter.
The following printout descriptions are modified, ’Cell Description Data’ and
’Radio X-Ceiver Administration Managed Object Configuration Data.
Support for IRC in BSM, CNA and CNAI in OSS is also added.
Battery backup time is tested (on cyclic basis) and if the measured time is
less than an operator configured expected time, an alarm is generated. This
reduces maintenance costs and avoids unnecessary replacement of batteries.
It allows the operator to replace batteries before a situation occurs where bad
batteries lead to a RBS out of service.
Note that the software support for Battery Test on the RBS PPC platform
is supported in BTS 10.1B.
6.2.2 Hardware
This feature is available for the Macro RBS 2000 with following site solution:
single cabinet, master + extension with separated or shared batteries and sites
with many RBS 2000 and shared batteries. The power supply unit has to be
either a PSU 230 or a PSU AC and the batteries have to support more than
0.2 hours backup time.
6.2.3 Implementation
No Impact.
6.2.4 Interface
Abis interface is updated to support this feature.
6.2.5 Memory
No Impact.
6.2.6 Operations
No Impact.
All new monitors can be viewed in real-time using the new improved R-PMO
user interface. The events as well as the monitors can also be stored in
tab-seperated text files for post processing in other tools.
7.1.2 Hardware
No Impact.
7.1.3 Implementation
No Impact.
7.1.4 Interface
The OSS-BSC (RNX-BSC) interface is updated to support the new monitors.
7.1.5 Memory
See capacity and performance.
7.1.6 Operations
No Impact.
Table 16
Object Type Counter Description Level
CELLMSQ NQPCCNT Number of PC requests CELL
CELLMSQ RQHIGHCNT Number of PC that have been CELL
removed due to higher PC
request
CELLMSQ NIQLOWCNT number of PCs not allowed in CELL
queue due to PC has lower
priority-queue is full
CELLMSQ RQT11CNT Number of PCs that have been CELL
removed from queue due to
time out
CELLMSQ NPCALLOC- MS queuing counter CELL
CNT
CELLMSQ RQLOSSCNT MS queuing counter CELL
CELLPAG PAGCHCONG Number of discarded pages CELL
due to full Page queue in the
BTS
CELLPAG PAGTOOOLD Number of discarded pages CELL
due to age
CLRATECHG HOAT- Number of intra cell handover CELL
FRHRAMR attempts due to FR to HR
channel rate change made by
an AMR capable mobile
CLRATECHG HOAT- Number of intra cell handover CELL
FRHRNAMR attempts due to FR to HR
channel rate change made by
a mobile not capable of AMR
CLRATECHG HO- Number of succesful intra cell CELL
SUCFRHRAMR handovers due to FR to HR
channel rate change made by
an AMR capable mobile
CLRATECHG HO- Number of successful intra cell CELL
SUCFRHRNAMR handovers due to FR to HR
channel rate change made by
a mobile not capable of AMR
Table 16
CLRATECHG HOATHRFRAMR Number of intra cell handover CELL
attempts due to HR to FR
channel rate change made by
an AMR capable mobile
CLRATECHG HOATHRFR- Number of intra cell handover CELL
NAMR attempts due to HR to FR
channel rate change made by
a mobile not capable of AMR
CLRATECHG HO- Number of successful intra cell CELL
SUCHRFRAMR handovers due to HR to FR
channel rate change made by
an AMR capable mobile
CLRATECHG HOSUCHRFR- Number of successful intra cell CELL
NAMR handovers due to HR to FR
channel rate change made by
a mobile not capable of AMR
CELEVENTSC SCLDCOMUL Subcell change attempts and CELL
successful subcell change
CELEVENTSC SCLDSUCUL Subcell change attempts and CELL
successful subcell change
CELEVENTSC DTCBCOMUL Subcell change attempts and CELL
successful subcell change
CELEVENTSC DTCBSUCUL Subcell change attempts and CELL
successful subcell change
CELEVENTSC LOLCOMUL Subcell change attempts and CELL
successful subcell change
CELEVENTSC LOLSUCUL Subcell change attempts and CELL
successful subcell change
CELEVENTSC TAOLCOMUL Subcell change attempts and CELL
successful subcell change
CELEVENTSC TAOLSUCUL Subcell change attempts and CELL
successful subcell change
BSCGPRS2 RPP0040 Number of scans where RPP BSC
load was between 0 and 40%
BSCGPRS2 RPP4160 Number of scans where RPP BSC
load was between 41 and 60%
BSCGPRS2 RPP6180 Number of scans where RPP BSC
load was between 61 and 80%
BSCGPRS2 RPP8190 Number of scans where RPP BSC
load was between 81 and 90%
Table 16
BSCGPRS2 RPP9100 Number of scans where RPP BSC
load was between 91 and
100%
CELLGPRS2 LDISTFI Number of times the entire CELL
contents of DL LLC PDU
buffer were discarded due to
the reason No available PDCH
or TFI
CELLGPRS2 LDISOTH Number of times the entire CELL
contents of DL LLC PDU
buffer were discarded due to
the reason ’Other’
CELLGPRS2 PSCHREQ Number of successful received CELL
access requests in the PCU
on any channel
CELLGPRS2 PREJTFI Number of rejected access CELL
requests for the reason No
PDCH, USF or TFI
CELLGPRS2 PREJOTH Number of rejected access CELL
requests due to reason ’Other’
CELLGPRS2 IAULREL Number of times an UL TBF CELL
is closed down because radio
contact has been lost with
the MS after PS immediate
Assignment or the Packet UL
Assignment has been sent
CELLGPRS2 FLUDISC Number of flush messages CELL
from SGSN that resulted in
one or more LLC PDUs in the
buffer being discarded.
CELLGPRS2 FLUMOVE Number of flush messages CELL
from SGSN that resulted in
one or more LLC PDUs in the
buffer being moved to another
queue
CELLGPRS2 LDISRR Number of times the entire CELL
contents of DL LLC PDU
buffer were discarded due to
the radio reasons
CELLGPRSO ALLPDCH- Number of accumulations CELL
SCANSUB of alloacated PDCHs in OL
subcell
Table 16
CELLGPRSO PREEMTPD- Number of preemted used CELL
CHSUB PDCHs in OL subcell
CELLGPRSO ALLPD- Number of allocated PDCHs CELL
CHACCSUB accumulator for OL subcell
CELLGPRSO ALLPDCHAC- Number of used PDCHs CELL
TACCSUB accumulator for OL subcells
CELLGPRSO MC19DLSCHED- Number of RLC data blocks CELL
SUB scheduled by the MAC
protocol in the OL subcell only
for MCS 1–9
CELLGPRSO MC19DLACK- Total amount of RLC data CELL
SUB successfully acknowledged
from the total RLC data blocks
scheduled on the DL in the OL
subcell only for MCS 1–9
CELLGPRSO MC19ULSCHED- Number of RLC data blocks CELL
SUB scheduled by the MAC
protocol in the OL subcell only
for MCS 1–9
CELLGPRSO MC19ULACK- Total amount of RLC data CELL
SUB successfully acknowledged
from the total RLC data blocks
scheduled on the UL in the OL
subcell only for MCS 1–9
CELLGPRSO CS14DLSCHED- Number of RLC data blocks CELL
SUB scheduled by the MAC
protocol in the OL subcell only
for CS 1–4
CELLGPRSO CS14DLACK- Total amount of RLC data CELL
SUB successfully acknowledged
from the total RLC data blocks
scheduled on the UL in the OL
subcell only for CS 1–4
CELLGPRSO CS12DLSCHED- Number of RLC data blocks CELL
SUB scheduled by the MAC
protocol in the OL subcell only
for CS 1–2
CELLGPRSO CS12DLACK- Total amount of RLC data CELL
SUB successfully acknowledged
from the total RLC data blocks
scheduled on the DL in the OL
subcell only for CS 1–2
Table 16
CELLGPRSO CS12ULSCHED- Number of RLC data blocks CELL
SUB scheduled by the MAC
protocol in the OL subcell only
for CS 1–2
CELLGPRSO CS12ULACK- Total amount of RLC data CELL
SUB successfully acknowledged
from the total RLC data blocks
scheduled on the UL in the OL
subcell only for CS 1–2
CELLGPRSO LDISRRSUB Number of tiems the entire CELL
contents of the DL LLC PDU
buffer were discarded due to
radio reasons
CELLGPRSO IAULRELSUB Number of times an UL TBF CELL
is closed down because radio
contact has been lost with the
MS after the PS Immediate
Assignment message or
the Packet UL Assignment
message has been sent in the
OL subcell only
CELLQOSS VOLUL- Accumulated UL TBF volume CELL
STRACC over one measurement period
CELLQOSS WTHP10STRACCDL weighted throughput over CELL
one measurement period in
the GBR interval 10–19
CELLQOSS WTHP20STRACCDL weighted throughput over CELL
one measurement period in
the GBR interval 20–29
CELLQOSS WTHP30STRACCDL weighted throughput over CELL
one measurement period in
the GBR interval 30–39
CELLQOSS WTHP40STRACCDL weighted throughput over CELL
one measurement period in
the GBR interval 40–59
CELLQOSS WTHP60STRACCDL weighted throughput over CELL
one measurement period in
the GBR interval 60–79
CELLQOSS WTHP80STRACCDL weighted throughput over CELL
one measurement period in
the GBR interval 80–119
Table 16
CELLQOSS WTHP120STRACC
DL weighted throughput over CELL
one measurement period in
the GBR interval 120–159
CELLQOSS WTHP160STRACC
DL weighted throughput over CELL
one measurement period in
the GBR interval 160 and over
CELLQOSS VOL10STRACC Accumulated DL TBF volume CELL
over one measurement period
in the GBR interval 10–19
CELLQOSS VOL20STRACC Accumulated DL TBF volume CELL
over one measurement period
in the GBR interval 20–29
CELLQOSS VOL30STRACC Accumulated DL TBF volume CELL
over one measurement period
in the GBR interval 30–39
CELLQOSS VOL40STRACC Accumulated DL TBF volume CELL
over one measurement period
in the GBR interval 40–59
CELLQOSS VOL60STRACC Accumulated DL TBF volume CELL
over one measurement period
in the GBR interval 60–79
CELLQOSS VOL80STRACC Accumulated DL TBF volume CELL
over one measurement period
in the GBR interval 80–119
CELLQOSS VOL120STRACC Accumulated DL TBF volume CELL
over one measurement period
in the GBR interval 120–159
CELLQOSS VOL160STRACC Accumulated DL TBF volume CELL
over one measurement period
in the GBR interval 160 and
over
CLQOSSCON CELLPPRS QoS Streaming Congestion CELL
counter
CLQOSSCON GBR10REQ QoS Streaming Congestion CELL
counter
CLQOSSCON GBR20REQ QoS Streaming Congestion CELL
counter
CLQOSSCON GBR30REQ QoS Streaming Congestion CELL
counter
CLQOSSCON GBR40REQ QoS Streaming Congestion CELL
counter
Table 16
CLQOSSCON GBR60REQ QoS Streaming Congestion CELL
counter
CLQOSSCON GBR80REQ QoS Streaming Congestion CELL
counter
CLQOSSCON GBR120REQ QoS Streaming Congestion CELL
counter
CLQOSSCON GBR160REQ QoS Streaming Congestion CELL
counter
CLQOSSCON GBR10LOW QoS Streaming Congestion CELL
counter
CLQOSSCON GBR20LOW QoS Streaming Congestion CELL
counter
CLQOSSCON GBR30LOW QoS Streaming Congestion CELL
counter
CLQOSSCON GBR40LOW QoS Streaming Congestion CELL
counter
CLQOSSCON GBR60LOW QoS Streaming Congestion CELL
counter
CLQOSSCON GBR80LOW QoS Streaming Congestion CELL
counter
CLQOSSCON GBR120LOW QoS Streaming Congestion CELL
counter
CLQOSSCON GBR160LOW QoS Streaming Congestion CELL
counter
CLQOSSCON2 GBR10FAIL QoS Streaming Congestion CELL
counter
CLQOSSCON2 GBR20FAIL QoS Streaming Congestion CELL
counter
CLQOSSCON2 GBR30FAIL QoS Streaming Congestion CELL
counter
CLQOSSCON2 GBR40FAIL QoS Streaming Congestion CELL
counter
CLQOSSCON2 GBR60FAIL QoS Streaming Congestion CELL
counter
CLQOSSCON2 GBR80FAIL QoS Streaming Congestion CELL
counter
CLQOSSCON2 GBR120FAIL QoS Streaming Congestion CELL
counter
Table 16
CLQOSSCON2 GBR160FAIL QoS Streaming Congestion CELL
counter
CLQOSSCON2 TBFUPS QoS Streaming Congestion CELL
counter
DELSTRTBF START- QoS Streaming Counter BSC
STRTBF
DELSTRTBF STARTCON- QoS Streaming Counter BSC
TSTRTBF
DELSTRTBF PENDSTRTBF QoS Streaming Counter BSC
DELSTRTBF PENDCON- QoS Streaming Counter BSC
TSTRTBF
TRAFFDLGPRS TRAFFDL- GPRS DL Traffic load counter CELL
GPRSSCAN
TRAFFDLGPRS TBFDLGPRS GPRS DL Traffic load counter CELL
TRAFFDLGPRS TBFDLEGPRS GPRS DL Traffic load counter CELL
TRAFFDLGPRS DLBPDCH GPRS DL Traffic load counter CELL
TRAFFDLGPRS DLGPDCH GPRS DL Traffic load counter CELL
TRAFFDLGPRS DLEPDCH GPRS DL Traffic load counter CELL
TRAFFDLGPRS DLTBFPBDCH GPRS DL Traffic load counter CELL
TRAFFDLGPRS DLTBFGPDCH GPRS DL Traffic load counter CELL
TRAFFDLGPRS DLTBFEPDCH GPRS DL Traffic load counter CELL
TRAFFDLGPRS STRBPDCH GPRS DL Traffic load counter CELL
TRAFFDLGPRS STRGPDCH GPRS DL Traffic load counter CELL
TRAFFDLGPRS STREPDCH GPRS DL Traffic load counter CELL
TRAFFDLGPRS QOSWDLBA- GPRS DL Traffic load counter CELL
SIC
TRAFFDLGPRS QOSWDL- GPRS DL Traffic load counter CELL
GPRS
TRAFFDLGPRS QOSWDLEG- GPRS DL Traffic load counter CELL
PRS
TRAFFULGPRS TRAFFUL- GPRS UL Traffic load counter CELL
GPRSSCAN
TRAFFULGPRS TBFULGPRS GPRS UL Traffic load counter CELL
TRAFFULGPRS TBFULEGPRS GPRS UL Traffic load counter CELL
TRAFFULGPRS ULBPDCH GPRS UL Traffic load counter CELL
TRAFFULGPRS ULGPDCH GPRS UL Traffic load counter CELL
Table 16
TRAFFULGPRS ULEPDCH GPRS UL Traffic load counter CELL
TRAFFULGPRS ULTBFPBDCH GPRS UL Traffic load counter CELL
TRAFFULGPRS ULTBFGPDCH GPRS UL Traffic load counter CELL
TRAFFULGPRS DLTBFEPDCH GPRS UL Traffic load counter CELL
TRAFFULGPRS QOSWULBA- GPRS UL Traffic load counter CELL
SIC
TRAFFULGPRS QOSWUL- GPRS UL Traffic load counter CELL
GPRS
TRAFFULGPRS QOSWULEG- GPRS UL Traffic load counter CELL
PRS
TRAFFGPRS2 TRAFF2BTBF- GPRS traffic load counter CELL
SCAN
TRAFFGPRS2 TRAFF2GTBF- GPRS traffic load counter CELL
SCAN
TRAFFGPRS2 TRAFF2ETBF- GPRS traffic load counter CELL
SCAN
TRAFFGPRS2 MUTILBASIC GPRS traffic load counter CELL
TRAFFGPRS2 MULTIGPRS GPRS traffic load counter CELL
TRAFFGPRS2 MULTIEGPRS GPRS traffic load counter CELL
TRAFFGPRS2 MAXTSDL GPRS traffic load counter CELL
TRAFFGPRS2 MUTIL24 GPRS traffic load counter CELL
TRAFFGPRS2 MUTIL34 GPRS traffic load counter CELL
TRAFFGPRS2 MUTIL44 GPRS traffic load counter CELL
TRAFFGPRS2 MUTIL13 GPRS traffic load counter CELL
TRAFFGPRS2 MUTIL23 GPRS traffic load counter CELL
TRAFFGPRS2 MUTIL33 GPRS traffic load counter CELL
TRAFFGPRS2 MUTIL12 GPRS traffic load counter CELL
TRAFFGPRS2 MUTIL22 GPRS traffic load counter CELL
TRAFFGPRS2 MUTIL14 GPRS traffic load counter CELL
CELLFERF TFV3FERCM1 FR Frame Erasure Rate (FER) CELL
counter
CELLFERF TFV3FERCM2 FR Frame Erasure Rate (FER) CELL
counter
CELLFERF TFV3FERCM3 FR Frame Erasure Rate (FER) CELL
counter
Table 16
CELLFERF TFV3FERCM4 FR Frame Erasure Rate (FER) CELL
counter
CELLFERF TFV1FER FR Frame Erasure Rate (FER) CELL
counter
CELLFERF TFV2FER FR Frame Erasure Rate (FER) CELL
counter
CELLFERF TFV3TFCM1 FR Frame Erasure Rate (FER) CELL
counter
CELLFERF TFV3TFCM2 FR Frame Erasure Rate (FER) CELL
counter
CELLFERF TFV3TFCM3 FR Frame Erasure Rate (FER) CELL
counter
CELLFERF TFV3TFCM4 FR Frame Erasure Rate (FER) CELL
counter
CELLFERF TFV1FERTF FR Frame Erasure Rate (FER) CELL
counter
CELLFERF TFV2FERTF FR Frame Erasure Rate (FER) CELL
counter
CELLFERH THV3FERCM1 HR Frame Erasure Rate (FER) CELL
counter
CELLFERH THV3FERCM2 HR Frame Erasure Rate (FER) CELL
counter
CELLFERH THV3FERCM3 HR Frame Erasure Rate (FER) CELL
counter
CELLFERH THV3FERCM4 HR Frame Erasure Rate (FER) CELL
counter
CELLFERH THV1FER HR Frame Erasure Rate (FER) CELL
counter
CELLFERH THV1FERTF HR Frame Erasure Rate (FER) CELL
counter
CELLFERH THV3TFCM1 HR Frame Erasure Rate (FER) CELL
counter
CELLFERH THV3TFCM2 HR Frame Erasure Rate (FER) CELL
counter
CELLFERH THV3TFCM3 HR Frame Erasure Rate (FER) CELL
counter
CELLFERH THV3TFCM4 HR Frame Erasure Rate (FER) CELL
counter
Table 16
CLTCHFV3C TFV3CM1UL Codec mode utilisation (AMR CELL
FR) counter
CLTCHFV3C TFV3CM2UL Codec mode utilisation (AMR CELL
FR) counter
CLTCHFV3C TFV3CM3UL Codec mode utilisation (AMR CELL
FR) counter
CLTCHFV3C TFV3CM4UL Codec mode utilisation (AMR CELL
FR) counter
CLTCHFV3C TFV3CM1DL Codec mode utilisation (AMR CELL
FR) counter
CLTCHFV3C TFV3CM2DL Codec mode utilisation (AMR CELL
FR) counter
CLTCHFV3C TFV3CM3DL Codec mode utilisation (AMR CELL
FR) counter
CLTCHFV3C TFV3CM4DL Codec mode utilisation (AMR CELL
FR) counter
CLTCHHV3C THV3CM1UL Codec mode utilisation (AMR CELL
HR) counter
CLTCHHV3C THV3CM2UL Codec mode utilisation (AMR CELL
HR) counter
CLTCHHV3C THV3CM3UL Codec mode utilisation (AMR CELL
HR) counter
CLTCHHV3C THV3CM4UL Codec mode utilisation (AMR CELL
HR) counter
CLTCHHV3C THV3CM1DL Codec mode utilisation (AMR CELL
HR) counter
CLTCHHV3C THV3CM2DL Codec mode utilisation (AMR CELL
HR) counter
CLTCHHV3C THV3CM3DL Codec mode utilisation (AMR CELL
HR) counter
CLTCHHV3C THV3CM4DL Codec mode utilisation (AMR CELL
HR) counter
CLTCHDRAF TFDISTAA Dropped connections for CELL
TCH/F
CLTCHDRAF TFSUDLOSA Dropped connections for CELL
TCH/F
CLTCHDRAF TFSUDLOS- Dropped connections for CELL
SUBA TCH/F
Table 16
CLTCHDRAF TFDISSDLA Dropped connections for CELL
TCH/F
CLTCHDRAF TFDISSDL- Dropped connections for CELL
SUBA TCH/F
CLTCHDRAF TFDISSULA Dropped connections for CELL
TCH/F
CLTCHDRAF TFDISSUL- Dropped connections for CELL
SUBA TCH/F
CLTCHDRAF TFDISSBLA Dropped connections for CELL
TCH/F
CLTCHDRAF TFDISS- Dropped connections for CELL
BLSUBA TCH/F
CLTCHDRAF TFDISQADLA Dropped connections for CELL
TCH/F
CLTCHDRAF TFDISQADL- Dropped connections for CELL
SUBA TCH/F
CLTCHDRAF TFDISQAULA Dropped connections for CELL
TCH/F
CLTCHDRAF TFDIS- Dropped connections for CELL
QAULSUBA TCH/F
CLTCHDRAF TFDISQABLA Dropped connections for CELL
TCH/F
CLTCHDRAF TFDIS- Dropped connections for CELL
QABLSUBA TCH/F
CLTCHDRAH THDISTAA Dropped connections for CELL
TCH/H
CLTCHDRAH THSUDLOSA Dropped connections for CELL
TCH/H
CLTCHDRAH THSUDLOS- Dropped connections for CELL
SUBA TCH/H
CLTCHDRAH THDISSDLA Dropped connections for CELL
TCH/H
CLTCHDRAH THDISSDL- Dropped connections for CELL
SUBA TCH/H
CLTCHDRAH THDISSULA Dropped connections for CELL
TCH/H
CLTCHDRAH THDISSUL- Dropped connections for CELL
SUBA TCH/H
Table 16
CLTCHDRAH THDISSBLA Dropped connections for CELL
TCH/H
CLTCHDRAH THDISS- Dropped connections for CELL
BLSUBA TCH/H
CLTCHDRAH THDISQADLA Dropped connections for CELL
TCH/H
CLTCHDRAH THDISQADL- Dropped connections for CELL
SUBA TCH/H
CLTCHDRAH THDISQAULA Dropped connections for CELL
TCH/H
CLTCHDRAH THDIS- Dropped connections for CELL
QAULSUBA TCH/H
CLTCHDRAH THDISQABLA Dropped connections for CELL
TCH/H
CLTCHDRAH THDIS- Dropped connections for CELL
QABLSUBA TCH/H
Table 17
Object Type Counter Description Level
CELLSQI TSQIGOODAF SQS for AMR. New counter CELL
for monitoring speech quality
for AMR FR and HR codecs
for overlaid and underlaid
subcells.
CELLSQI TSQIGOODAH SQS for AMR. New counter CELL
for monitoring speech quality
for AMR FR and HR codecs
for overlaid and underlaid
subcells.
CELLSQI TSQIGOOD- SQS for AMR. New counter CELL
SUBAF for monitoring speech quality
for AMR FR and HR codecs
for overlaid and underlaid
subcells.
Table 17
CELLSQI TSQIGOOD- SQS for AMR. New counter CELL
SUBAH for monitoring speech quality
for AMR FR and HR codecs
for overlaid and underlaid
subcells.
CELLSQI TSQIACCPTAF SQS for AMR. New counter CELL
for monitoring speech quality
for AMR FR and HR codecs
for overlaid and underlaid
subcells.
CELLSQI TSQIACCPTAH SQS for AMR. New counter CELL
for monitoring speech quality
for AMR FR and HR codecs
for overlaid and underlaid
subcells.
CELLSQI TSQIACCPT- SQS for AMR. New counter CELL
SUBAF for monitoring speech quality
for AMR FR and HR codecs
for overlaid and underlaid
subcells.
CELLSQI TSQIACCPTS- SQS for AMR. New counter CELL
BAH for monitoring speech quality
for AMR FR and HR codecs
for overlaid and underlaid
subcells.
CELLSQI TSQIBADAF SQS for AMR. New counter CELL
for monitoring speech quality
for AMR FR and HR codecs
for overlaid and underlaid
subcells.
CELLSQI TSQIBADAH SQS for AMR. New counter CELL
for monitoring speech quality
for AMR FR and HR codecs
for overlaid and underlaid
subcells.
CELLSQI TSQIBADSUBAF SQS for AMR. New counter CELL
for monitoring speech quality
for AMR FR and HR codecs
for overlaid and underlaid
subcells.
CELLSQI TSQIBADSUBAH SQS for AMR. New counter CELL
for monitoring speech quality
for AMR FR and HR codecs
for overlaid and underlaid
subcells.
Table 17
BSC BSCCUMMS MS Session counter. Changed BSC
from 16 bits to 32 bits due to
overflow.
BSC GSM900CUMMS MS Session counter. Changed BSC
from 16 bits to 32 bits due to
overflow.
RANDOMACC RA- Random Access Counter. CELL
TRHFAOTHER Changed behavior due to
new counter in object type.
RATRHFAOTHER(new)=RA-
TRHFAOTHER(old)-RA-
TRHFAANPAG.
RANDOMACC RATRHFAAN- New Random Access Counter. CELL
PAG The counter will be stepped
for every rejected “CHANNEL
REQUIRED” in TRH with
establishment cause “Answer
to paging”
BSCGPRS NACCPCO Number of PCCP messages BSC
sent per BSC. New counter.
BSCGPRS ESUTONRM Number of TBF set up in ’Early BSC
Set-up of DL TBF mode’ that
resume normal operation.
New counter.
BSCGPRS ESUDLTBF Number of TBF set up in ’Early BSC
Set-up of DL TBF mode’. New
counter.
BSCGPRS DELRELTONRM Number of DL TBFs for which BSC
the release is delayed in
’Delayed Release of a DL TBF
mode’ that resume normal
operation. New counter.
BSCGPRS DELRELDLTBF Number of DL TBFs for which BSC
the release is delayed in
’Delayed Release of a DL TBF
mode’. New counter.
BSCGPRS EXULTIP Number of UL TBFs entering BSC
the ’Temporary Inactive
Period’. New counter.
BSCGPRS EXULNRM Number of UL TBFs entering BSC
the ’Temporary Inactive Period’
that resume normal operation.
New counter.
Table 17
BSCGPRS GSL0040 Total number of scans where BSC
fraction is between 0 and 40%.
New counter.
BSCGPRS GSL4160 Total number of scans where BSC
fraction is between 41 and
60%. New counter.
BSCGPRS GSL6180 Total number of scans where BSC
fraction is between 61 and
80%. New counter.
BSCGPRS GSL8190 Total number of scans where BSC
fraction is between 81 and
90%. New counter.
BSCGPRS GSL9100 Total number of scans where BSC
fraction is between 91 and
100%. New counter.
BSCGPRS GSLMAX Accumulated number of BSC
maximum GSL 16 kbit/s
devices possible to use. New
counter.
BSCGPRS GSLUTIL Accumulated number of BSC
maximum GSL devices
possible to use, fractions
calculated for each scan. New
counter.
BSCGPRS GSLSCAN Number of scans of PCU BSC
taken in relation to GSL device
utilization. New counter.
CELLGPRS CS12ULSCHED Main GPRS events in BSC. CELL
New counter to monitor the
average radio link bitrate.
CELLGPRS CS12DLSCHED Main GPRS events in BSC. CELL
New counter to monitor the
average radio link bitrate.
CELLGPRS CS12ULACK Main GPRS events in BSC. CELL
New counter to monitor the
average radio link bitrate.
CELLGPRS CS12DLACK Main GPRS events in BSC. CELL
New counter to monitor the
average radio link bitrate.
CELLGPRS MC19ULSCHED Main GPRS events in BSC. CELL
New counter to monitor the
average radio link bitrate.
Table 17
CELLGPRS MC19ULACK Main GPRS events in BSC. CELL
New counter to monitor the
average radio link bitrate.
LOADREG NREJIEX Load Regulation counter. New BSC
counter for the number of
terminating calls rejected by
the process load control.
CELLQOSG ULTHP1GTHR GPRS QoS throughput CELL
counter. Counter
weighted by data volume.
ULTHP1GTHR(new) =
ULTHP1GTHR(old) * LLC
data volume.
CELLQOSG DLTHP1GTHR GPRS QoS throughput CELL
counter. Counter
weighted by data volume.
DLTHP1GTHR(new) =
DLTHP1GTHR(old) * LLC
data volume.
CELLQOSG ULTHP2GTHR GPRS QoS throughput CELL
counter. Counter
weighted by data volume.
ULTHP2GTHR(new) =
ULTHP2GTHR(old) * LLC
data volume.
CELLQOSG DLTHP2GTHR GPRS QoS throughput CELL
counter. Counter
weighted by data volume.
DLTHP2GTHR(new) =
DLTHP2GTHR(old) * LLC
data volume.
CELLQOSG ULTHP3GTHR GPRS QoS throughput CELL
counter. Counter
weighted by data volume.
ULTHP3GTHR(new) =
ULTHP3GTHR(old) * LLC
data volume.
CELLQOSG DLTHP3GTHR GPRS QoS throughput CELL
counter. Counter
weighted by data volume.
DLTHP3GTHR(new) =
DLTHP3GTHR(old) * LLC
data volume.
Table 17
CELLQOSG ULBGGTHR GPRS QoS throughput CELL
counter. Counter
weighted by data volume.
ULBGGTHR(new)
=ULBGGTHR(old) * LLC
data volume.
CELLQOSG DLBGGTHR GPRS QoS throughput CELL
counter. Counter
weighted by data volume.
DLBGGTHR(new)
=DLBGGTHR(old) * LLC
data volume.
CELLQOSEG ULTHP1EGTHR EGPRS QoS throughput CELL
counter. Counter
weighted by data volume.
ULTHP1EGTHR(new) =
ULTHP1EGTHR(old) * LLC
data volume.
CELLQOSEG DLTHP1EGTHR EGPRS QoS throughput CELL
counter. Counter
weighted by data volume.
DLTHP1EGTHR(new) =
DLTHP1EGTHR(old) * LLC
data volume.
CELLQOSEG ULTHP2EGTHR EGPRS QoS throughput CELL
counter. Counter
weighted by data volume.
ULTHP2EGTHR(new) =
ULTHP2EGTHR(old) * LLC
data volume.
CELLQOSEG DLTHP2EGTHR EGPRS QoS throughput CELL
counter. Counter
weighted by data volume.
DLTHP2EGTHR(new) =
DLTHP2EGTHR(old) * LLC
data volume.
CELLQOSEG ULTHP3EGTHR EGPRS QoS throughput CELL
counter. Counter
weighted by data volume.
ULTHP3EGTHR(new) =
ULTHP3EGTHR(old) * LLC
data volume.
Table 17
CELLQOSEG DLTHP3EGTHR EGPRS QoS throughput CELL
counter. Counter
weighted by data volume.
DLTHP3EGTHR(new) =
DLTHP3EGTHR(old) * LLC
data volume.
CELLQOSEG ULBGEGTHR EGPRS QoS throughput CELL
counter. Counter
weighted by data volume.
ULBGEGTHR(new) =
ULBGEGTHR(old) * LLC
data volume.
CELLQOSEG DLBGEGTHR EGPRS QoS throughput CELL
counter. Counter
weighted by data volume.
DLBGEGTHR(new) =
DLBGEGTHR(old) * LLC
data volume.
RLINKBITR INT8BRG- GPRS Radio Link Quality CELL
PRSTBF counter. Measures “volume
of successfully received RLC
data” instead of “number of
TBFs”.
RLINKBITR INT10BRG- GPRS Radio Link Quality CELL
PRSTBF counter. Measures “volume
of successfully received RLC
data” instead of “number of
TBFs”.
RLINKBITR INT12BRG- GPRS Radio Link Quality CELL
PRSTBF counter. Measures “volume
of successfully received RLC
data” instead of “number of
TBFs”.
RLINKBITR INT14BRG- GPRS Radio Link Quality CELL
PRSTBF counter. Measures “volume
of successfully received RLC
data” instead of “number of
TBFs”.
RLINKBITR INT16BRG- GPRS Radio Link Quality CELL
PRSTBF counter. Measures “volume
of successfully received RLC
data” instead of “number of
TBFs”.
Table 17
RLINKBITR INT18BRG- GPRS Radio Link Quality CELL
PRSTBF counter. Measures “volume
of successfully received RLC
data” instead of “number of
TBFs”.
RLINKBITR INT10BREG- GPRS Radio Link Quality CELL
PRSTBF counter. Measures “volume
of successfully received RLC
data” instead of “number of
TBFs”.
RLINKBITR INT15BREG- GPRS Radio Link Quality CELL
PRSTBF counter. Measures “volume
of successfully received RLC
data” instead of “number of
TBFs”.
RLINKBITR INT20BREG- GPRS Radio Link Quality CELL
PRSTBF counter. Measures “volume
of successfully received RLC
data” instead of “number of
TBFs”.
RLINKBITR INT25BREG- GPRS Radio Link Quality CELL
PRSTBF counter. Measures “volume
of successfully received RLC
data” instead of “number of
TBFs”.
RLINKBITR INT30BREG- GPRS Radio Link Quality CELL
PRSTBF counter. Measures “volume
of successfully received RLC
data” instead of “number of
TBFs”.
RLINKBITR INT35BREG- GPRS Radio Link Quality CELL
PRSTBF counter. Measures “volume
of successfully received RLC
data” instead of “number of
TBFs”.
RLINKBITR INT40BREG- GPRS Radio Link Quality CELL
PRSTBF counter. Measures “volume
of successfully received RLC
data” instead of “number of
TBFs”.
RLINKBITR INT45BREG- GPRS Radio Link Quality CELL
PRSTBF counter. Measures “volume
of successfully received RLC
data” instead of “number of
TBFs”.
Table 17
RLINKBITR INT50BREG- GPRS Radio Link Quality CELL
PRSTBF counter. Measures “volume
of successfully received RLC
data” instead of “number of
TBFs”.
RLINKBITR INT55BREG- GPRS Radio Link Quality CELL
PRSTBF counter. Measures “volume
of successfully received RLC
data” instead of “number of
TBFs”.
Table 18
Object Type Counter Description Level
CELLGPRS RBCDL Main GPRS events in BSC. CELL
Replaced by CS12DLSCHED
(only acknowledged mode)
CELLGPRS RBCUL Main GPRS events in BSC. CELL
Replaced by CS12ULSCHED
(only acknowledged mode)
CELLGPRS ERBCUL Main GPRS events in BSC. CELL
Replaced by MC19ULSCHED
(only acknowledged mode)
CELLGPRS RETRANSDL Main GPRS events in BSC. CELL
Replaced by CS12DLACK
(different usage)
CELLGPRS RETRANSUL Main GPRS events in BSC. CELL
Replaced by CS12ULACK
(different usage)
CELLGPRS ERETRANSUL Main GPRS events in BSC. CELL
Replaced by MC19ULACK
(different usage)
TRAFFGPRS TBFPULGPRS GPRS Traffic load counter. CELL
Object type TRAFFGPRS
is replaced by object
types TRAFDLGPRS and
TRAFULGPRS.
Table 18
TRAFFGPRS TBFPDLGPRS GPRS Traffic Load counter. CELL
Object type TRAFFGPRS
is replaced by object
types TRAFDLGPRS and
TRAFULGPRS.
TRAFFGPRS TBFPDLEGPRS GPRS Traffic Load counter. CELL
Object type TRAFFGPRS
is replaced by object
types TRAFDLGPRS and
TRAFULGPRS.
TRAFFGPRS TBFPULEGPRS GPRS Traffic Load counter. CELL
Object type TRAFFGPRS
is replaced by object
types TRAFDLGPRS and
TRAFULGPRS.
TRAFFGPRS PDCHULGPRS GPRS Traffic Load counter. CELL
Object type TRAFFGPRS
is replaced by object
types TRAFDLGPRS and
TRAFULGPRS.
TRAFFGPRS PDCHDLGPRS GPRS Traffic Load counter. CELL
Object type TRAFFGPRS
is replaced by object
types TRAFDLGPRS and
TRAFULGPRS.
TRAFFGPRS PDCHULEGPRS GPRS Traffic Load counter. CELL
Object type TRAFFGPRS
is replaced by object
types TRAFDLGPRS and
TRAFULGPRS.
TRAFFGPRS PDCHDLEGPRS GPRS Traffic Load counter. CELL
Object type TRAFFGPRS
is replaced by object
types TRAFDLGPRS and
TRAFULGPRS.
TRAFFGPRS TBFPULBASIC GPRS Traffic Load counter. CELL
Object type TRAFFGPRS
is replaced by object
types TRAFDLGPRS and
TRAFULGPRS.
TRAFFGPRS TBFPDLBASIC GPRS Traffic Load counter. CELL
Object type TRAFFGPRS
is replaced by object
types TRAFDLGPRS and
TRAFULGPRS.
Table 18
TRAFFGPRS PDCHULBASIC GPRS Traffic Load counter. CELL
Object type TRAFFGPRS
is replaced by object
types TRAFDLGPRS and
TRAFULGPRS.
TRAFFGPRS PDCHDLBASIC GPRS Traffic Load counter. CELL
Object type TRAFFGPRS
is replaced by object
types TRAFDLGPRS and
TRAFULGPRS.
Table 19
Object Old New Description Level
Type Counter Counter
CLCTCH TASSMS5 TCASSALL Assignment complete for all CELL
MSs. Name changed with
kept functionality (all MS
classes).
Table 20
Object type Counter Change
BSCQOS PFCLIFETIME The removed threshold
MIN_PFC_OCTET=0 will make
counter increase.
BSCQOS NUMBERTBF The removed threshold
MIN_PFC_OCTET=0 will make
counter increase.
Table 20
BSCQOS NUMBERLL- This quota is the average throughput
CPDU / PFCLIFE- and it might decrease because
TIME of the removed threshold
MIN_PFC_OCTET=0 but might
also increase because of the Delayed
release of TBFs and Early setup of
TBFs.
CELLQOSEG all Same changes as for CELLQOSG.
CELLQOSG xxxxDATA Counters might increase because
of the removed threshold
MIN_PFC_OCTET=0.
CELLQOSG xxxxPFC Counters might increase because
of the removed threshold
MIN_PFC_OCTET=0, but might
decrease because of the delayed
release of TBF and early setup of TBF.
CELLQOSG average Observe that the method of calculating
throughput the average throughput is changed but
the value should be about the same
(see explanation on BSCQOS average
throughput above):
R9.1: xxxxTHR/xxxxPFC = average
throughput
R10: xxxxTHR/xxxxDATA = average
throughput
BSCGPRS ALLPDCH Counter might increase due to early
set-up of DL TBFs (number of PDCH
allocation has increased)
CELLGPRS ALLPDCA, Counters might increase due to early
ALLPDCS, setup of DL TBFs (number of PDCH
PCHALLA, allocations has increased)
PCHALLF
CELLGPRS FAILDLT Counters might have increased
depending on that the counterin early
R10 releases counted also the failed
early setups of DL TBFs. This is now
changed and behaviour should be
approximately the same as in R9.1.
9 Glossary
CP Central Processor
DS Data Store
DT Data Transcript
FM Fault Manager
FR Full Rate
MS Mobile Station
NE Network Element
PC Personal Computer
PS Program Store
RP Regional Processor
RS Reference Store
RX Reciever
SL Signalling Link
SP Support Processor
TF Timing Function
TG Transceiver Group
TRX Transceiver
10 References
10/109 21–APT 210 09/207–1 Changes to the Operator Interface from APT 210
09/203 R1A to APT 210 09/207 R1A