SAE 70ers socey AEROSPACE | ...
PM nd So ira Spock
INTERNATIONAL MATERIAL
‘nocinvoneair vorenaw =I SPECIFICATION | yeuea 1947-00-01
Revised 1991-01-01
AMS-5522
‘Submited for recognition as an American National Standard | Superseding AMS-5522D
STEEL SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT
25Cr = 20Ni = 2.084 (314)
Solution Heat Treated
uNs $31400
This specification has been declared "NONCURRENT" by the Aerospace Materials
Division, SAE, as of July 15, 1983. It is recommended that this specification not
be specified for new designs
This cover sheet should be attached to the "D" revision of the subject
specification
"NONCURRENT" refers to those materials which have previously been widely used and
which may be required on some existing designs in the future. The Aerospace
Materials Division, however, does not reconmend these as standard materials for
future use in new designs. Each of the "NONCURRENT" specifications 1s avallable
from SAE upon request
This specification has been "CANCELLED" by the Aerospace Materials Division, SAE,
as of January, 1991, By this action, subject specification number and its title
will be deleted from the active specification index of Aerospace Matertal
Specifications
This specification is under the jurisdiction of AMS Committee
‘SAE Technical Board Rules provide that: “This roport is published ty SAE to advance the state of technical and engineering sciences
The use ofthis report is entirely voluntary. and its applicability and sitabity for any parteula use, ineluding any patent infengement
ausing theratram, is the Sol responsibly of he user”
‘SAE reviews each technical report at least every fv years at which ime it may be reamed, vised, or cancoled. SAE invites your
‘wntten comments and suggests,
Copyright 1990 Society of Automotive Engineers, Inc
Airis reserved, Printed in US.A,