This document summarizes three KemPress tools for completing press cycles of tubing and cables. The KPSA is the lightest small tool suitable for 15-35mm tubes, requiring maintenance every 2 years or 40,000 cycles. The KPL2 is for 15-54mm tubes, is also very light, and only requires maintenance every 2 years. The largest tool, the KPXL2, handles 15-108mm tubes and signals improper cycles, but requires maintenance every 40,000 cycles. All three tools indicate battery level, will not begin a press without enough power, and kits include the tool, jaws, batteries and charger.
This document summarizes three KemPress tools for completing press cycles of tubing and cables. The KPSA is the lightest small tool suitable for 15-35mm tubes, requiring maintenance every 2 years or 40,000 cycles. The KPL2 is for 15-54mm tubes, is also very light, and only requires maintenance every 2 years. The largest tool, the KPXL2, handles 15-108mm tubes and signals improper cycles, but requires maintenance every 40,000 cycles. All three tools indicate battery level, will not begin a press without enough power, and kits include the tool, jaws, batteries and charger.
This document summarizes three KemPress tools for completing press cycles of tubing and cables. The KPSA is the lightest small tool suitable for 15-35mm tubes, requiring maintenance every 2 years or 40,000 cycles. The KPL2 is for 15-54mm tubes, is also very light, and only requires maintenance every 2 years. The largest tool, the KPXL2, handles 15-108mm tubes and signals improper cycles, but requires maintenance every 40,000 cycles. All three tools indicate battery level, will not begin a press without enough power, and kits include the tool, jaws, batteries and charger.
• Suitable for 15 – 35mm • Lightest tool in the market (1.7 kg incl. battery) • One-Hand-Operation (patented) • Maintenance every 2 years or 40,000 press cycles • Battery status indication • Signal in case of an improper pressing cycle • Will not begin press unless enough power to complete it • Kit available with tool, jaws, batteries and charger KPL2 (EN KemPress Large Tool) • Suitable for 15 – 54mm • Lightest tool in the market (2.8 kg incl. battery) • One-Hand-Operation (patented) • Maintenance without any limitation of pressing cycles (only 2 years) • Battery status indication • Signal in case of an improper pressing cycle • Illumination of the press area • Will not begin press unless enough power to complete it • Kit available with tool, jaws, batteries and charger KPXL2 (EN KemPress Extra Large Tool) • Suitable for 15 – 108mm • Maintenance every 40,000 press cycles • Battery status indication • Signal in case of an improper pressing cycle • Will not begin press unless enough power to complete it • Kit available with tool, jaws, batteries and charger