Professional Documents
Culture Documents
Motorcycle Catalog 2014
Motorcycle Catalog 2014
MOTORCYCLE TOOLS
MBD4790 MDB4747
WHEEL BEARING REMOVAL/INSTALL KIT 22-PC. SPOKE TORQUE WRENCH SET
• This tool assembly will remove and install 3/4", • Includes 20 sockets and a dual-head spoke wrench
1", and 25mm I.D. sealed wheel bearings which offers install and removal in one tool
• Use Mac Tools wrenches with this tool • This set includes 11 torque heads and 11 fixed
heads for use with the sealed body wrench, all
complete in a blow-molded case.
• Head sizes included for both ends; 5.0mm, 5.6mm,
5.8mm, 6.0mm, 6.2mm, 6.3mm, 6.5mm, 6.7mm,
6.8mm, 7.1mm, and Spline
1 ®
MDB4748 MDB4777
BELT TENSION GAUGE TIRE BEAD HOLDING TOOL
• Easy-to-use tool allows for accurate belt • This tool allows the tire bead to be held
tension to be set after belt replacement, in the drop center of the wheel when
adjustment, or wheel service changing the tire or installing an inner tube
• Use on secondary drive belts • For use on wheels with 1-5/8" maximum
with a 10 lbs. specification side profile height
MDB4850
9-PC. FLYWHEEL PULLER SET
• Designed to pull magneto flywheel,
clutch hubs, or starter gears
• Works on wet or dry clutches
• 6x25mm and 8x40mm Bolts included
MDB4750
MDB4800 TIRE VALVE INSTALLER/REMOVER
CLUTCH HUB ALTERNATOR PULLER • Includes a stepped rubber sleeve
• Removes clutch on Big Twins that can be positioned on the handle
with 3, 5, and 10 fingers and also for optimum pulling angle of the valve,
services Sportster transmission while protecting the wheel finish
sprocket and clutch • Removes and installs snap-in
• Pulls motor sprockets, alternator style tire valves
covers, and has many other
general pulling applications
3 ®
MDB4744
CHAIN BREAKER AND RIVET KIT
• Breaks, presses, and rivets most
#25 - #35 and #428 - #630
standard and O-ring roller chains
• Includes HSS rivet tip for riveting
hollow nose master links
MDB4740
SPRING HOOK
• 6" Reach for easy removal and installation of headlight
adjusting springs, exhaust, and brake springs
• Made from heat-treated steel
MDB6673
BELT TENSION GAUGE
• Used to properly check drive belt tension on drive
belts to ensure maximum belt and bearing life
• Dual scale reads 30–180 in-lbs. (2.5-15 ft-lbs)
and 130-800 newton-meters
5 ®
MDB4797 MDB4801
STEM BEARING INSTALL TOOL UNIVERSAL CLUTCH HOLDER
• Provides a quick and easy method to • Holder arms designed to fit into the
install lower steering stem bearings external teeth of a clutch hub, but can
• The 14" drive-tube accepts the 1.0", 1.4", also be used on gears and sprockets
and 1.75" I.D. bearing adapters • Opens to handle a 5" outside diameter hub
Get a firm
grip without
leaving a mark.
MDB4779
FRONT FORK VICE
• Designed to hold up to 4" MDB4770
diameter round or oddly shaped MOTORCYCLE TIRE SPOON
components such as forks, • 13" Curved spoon includes comfort
shocks, pistons, rods, etc. grip handle and rounded head that
• The V-shaped jaws are covered prevents puncturing the tube
with thick rubber pads to ensure
a firm grip without leaving a mark
7 ®
10-PC. SET
MDB4741
9-PC. SPOKE TOOL SET
• Use to tighten or loosen spoke
nuts found on most motorcycle
and scooter wheel applications
INCLUDES:
• Nine Interchangeable Wrench Ends;
5.2mm, 5.4mm, 5.6mm, 5.8mm,
6.0mm, 6.2mm, 6.4mm ,6.6mm,
and 6.8mm
9-PC. SET
MDB4791 MDB4792
3/4" – 2" ADJUSTABLE SPANNER WRENCH 2" – 4-3/4" ADJUSTABLE SPANNER WRENCH
• Chrome vanadium hardened steel wrench features • Chrome vanadium hardened steel wrench features
a 5" handle and slim strong hook to access slotted a 9" handle and slim strong hook to access slotted
retaining rings in hard to reach areas retaining rings in hard to reach areas
MDB4848 MDB4769
FLEXIBLE SPOUT FUNNEL 3-PC. RIM PROTECTION SET
• Designed to reach difficult fill locations • Fits over the wheel rim to protect the wheel from
• Aluminum 5-1/2" funnel features a removable debris being scratched or damaged while using tire spoons
screen in the base flowing to a 25" flexible spout
9 ®
MDB4780
PERSONAL TOOL PACK
• Ideal take-along tool for long rides
INCLUDES:
• 2" Extension
• 1/4" Drive Ratchet
• 16 Drive Bits, and Universal Spline
Sockets fit both SAE 3/16" - 9/16"
and metric 5mm - 14mm nuts and
bolts in a variety of styles; 6-PT.,
12-PT., Torx®, Square, Spline, etc.
MDB1545
MOTORCYCLE ATV LIFT
• 1,500 lbs. Capacity and 17" long skids
that will lift the largest, widest cruisers
INCLUDES:
• Foot Pedal Release
• Locking Rear Casters
• Automatic Safety Lock
• (2) Ratcheting Tie-Down Straps
4437
PAGE 4
MDB1545
PAGE 10
MDB4507
PAGE 1
@Mac_Tools
facebook.com/mactools38
mactools38
®
800.MACTOOLS • MACTOOLS.COM
Disclaimer: Items shown are available for a limited time only and are subject to availability through your participating Mac Tools Distributor, Franchisee or Sales Representative. Prices reflect suggested
list price and are subject to change without notice. Printed colors may differ slightly from the actual color. Mac Tools is not responsible for typographical or photographic errors. In Canada, all taxes are
extra and are not included in the prices shown.
Mac Tools, a Division of Stanley Industrial & Automotive, LLC • 505 N Cleveland Avenue • Westerville, OH 43082 © 2014 Mac Tools Printed in the United States 040114BOS
®