Professional Documents
Culture Documents
Ferramenta de Cálculo de Domo Geodésico
Ferramenta de Cálculo de Domo Geodésico
1) Enter the radius of the dome you want to build A 0.25318 1.13931
2) The tool will automatically give you the total length of each edge B 0.29524 1.32858
3) Enter the thickness of the edge that complements the overall length. See the following example: C 0.29453 1.325385
4) Finally the tool will give you the length that the edge should have D 0.31287 1.407915
E 0.32492 1.46214
IMPORTANT F 0.29859 1.343655
To define the angles, it will be considered that the table is looking like the figure below:
Edge-Center Angle
Radius 3
Construction pattern
INSTRUCTIONS:
1) Enter the radius of the dome you want to build
2) The tool will automatically give you the total length of each edge
3) Enter the thickness of the edge that complements the overall length. See the following example:
4) Finally the tool will give you the length that the edge should have
IMPORTANT
To define the angles, it will be considered that the table is looking like the figure below:
Edge-Center Angle
Radius 3
Construction pattern
CF
A 0.61803
B 0.54653