Professional Documents
Culture Documents
The increase in hardness is shown by the value of the figure put in front of the letter H, 2H,
3H, and 4H etc.
a) True
b) False
The Grade becomes ______ according to the figure placed in front of the letter B, 2B, 3B, 4B
etc.
a) harder
b) lighter
c) darker
d) softer
If there is a need for the center line, then it can be used as a _____
a) Dimension line
b) Leader line
c) Extension line
d) Section line
1
As far as possible, the dimension should be given to which of the following lines?
a) Outline
b) Hidden line
c) Center line
d) Leader line
2
c) 3:5
d) 6:1
3
UNIT-II
PROJECTION OF POINTS
4
A straight line is the___________ distance between two points.
a) shortest
b) longest
c) half
d) infinite
When a line is parallel to a plane, the projection of the line on to that plane will be its______
length
a) shortened
b) true
c) enlarged
d) point
When a point is in HP and above VP, The point is resting in which quadrant?
II
III
IV
aNS: ii
Perpendicular
Parrallel
Inclined
Ans: Parallel
5
When a line is inclined to VP and parallel to HP, the front view will be ______________ to
XY line.
Parallel
Perpendicular
Inclined
None of above
Ans: Parallel
6
UNIT-III
The straight lines which are drawn from various points on the contour of an object to meet a
plane are called as _________
a) connecting lines
b) projectors
c) perpendicular lines
d) hidden lines.
When the projectors are parallel to each other and also perpendicular to the plane, the
projection is called ___________________________
a) Perspective projection
b) Oblique projection
c) Isometric projection
d) Orthographic projection
What is additional 3rd view on orthographic projection in general for simple objects?
a) Front view
b) Top view
c) Side view
d) View at 45 degrees perpendicular to horizontal plane
7
b) Vertical plane
c) Horizontal plane
d) Parallel plane