GUIDED BY :’ AR.SHILPA INGALE AR. VAIBHAV GHODKE WOOD SHELL wood shell works in 3 method on wood: preventive, preservation, and curative. PRECAUTION : Do not handle wood shell with bare hands , do not inhale and hand gloves should be used. COMPOSITION : Carbolic acid, naphthalene and hydrocarbon, petro derivatives. FEATURES: For better & faster results use wood shell before painting , polishing or lamination. To stop powder falling problem in plywood, inject wood shell into pin holes in plywood/wood. 1 Lt covers about 150sq.ft/14sq.m area. DIRECTIONS TO USE : Clean the surface and then apply wood shell with brush spray or swab. Apply a second coat if necessary. Wait for 8 hrs. and there after paint laminate or polish. MFD BY : Lada Organics Pvt ltd. MRP : Rs.175/- SMARTCARE CRACK SEAL Asian paints smartcard crack seal is a fiber glass reinforced ready to use crack filling compound for interior and exterior surface. DIRECTIONS FOR USE :ensure that the surface is free from oil dust, grease and oil particles etc. Widen the crake to form a ‘V’ groove and prime the surface. For interior cracks use Asian paints deco prime water based primer and for exterior crack Asian paints exterior wall primer. Apply the layer of Asian paints smart care crack seal exceeding 3cms from each side of the crack. Press the paste firmly into the crack with a spatula or putty knife and level with the surface. These must5 be applied in consecutive perpendicular layer to avoid leaving air pockets. Allow it to set for 12 hrs. before Applying the second coat. Further finishing the pop or putty can be taken up once the coat is fully dry. PRECAUTIONS : Do not apply for of more t5han 3mm thickness. Do not apply for temp below 5 degree Celsius or on wet surface. MANUFACTURED BY : beissier S.A. Spain. MARKETED & IMPORTED : Asian paints limited. MRP : Rs.146/- 360g PIONEER DIRECTIONS ;- surface must be clean & dry .cut nozzle to desired size. Insert cartridge into caulking gun. Push the sealant for uniform bead size, tool after 5 min. clean off excess sealant with solvent. Curing time is affected by the thickness of the sealant applied, temp and relative humidity. We have to apply this product before painting and staining of substrate. WEIGHT :- 280ml MRP:-Rs.200/- SMART CARE REPAIR POLYMER
5 kg NETT. MRP :-Rs.1450/- COMPANY :- Asian paints THANK YOU.