Professional Documents
Culture Documents
1.2 The Bidder is expected to examine all instructions, forms, terms, and specifications in the bidding
documents. Failure to furnish all information required by the bidding documents or to submit a bid not
substantially responsive to the bidding documents in every respect shall be at the Bidder’s risk and
may result in the rejection of its bid.
2. Source of Funds
2.1 The Punjab Employees Social Security Institution has allocated for purchase of medical equipment
under the relevant head of Account during the financial year 2019-2020 (herein referred to as the
“Procuring Agency”).
3. Eligible Bidders
3.1 This Invitation for Bids is open to all original Manufacturers/authorized Sole Agents of
Foreign Principals in Pakistan for supply of goods.
3.2 The bidder must possess valid authorization from the Foreign Principal / Manufacturer and in
case of Manufacturer; they should have a documentary proof to the effect that they are the original
Manufacturer of the required goods.
3.3 Bidders should not be under a declaration of ineligibility for corrupt and fraudulent practices issued
by any Government (Federal, Provincial), PESSI, a local body or a public sector organization.
3.4 Any offer not received as per terms and conditions of the Bidding documents is liable to
be rejected. No offer shall be considered if:-
i. Received without earnest money from any firm.
ii. It is received after the time and date fixed for its receipt.
iii. The tender is unsigned
iv. The offer is ambiguous.
v. The offer is conditional.
vi. The offer is from a firm, black listed, suspended.
vii. The offer is received by telegram/fax.
viii. Offer received with shorter validity than required in the tender enquiry.
ix. The offer is for store not conforming to specification indicated in the tender
enquiry. No counter offer will be accepted.
3.5 The bidder must be an active payer. National Tax Number (NTN) and General Sales
Tax Number with documentary proof shall have to be provided by bidder(s).
4.2 For the purpose of this clause, (a) the term “Goods” includes any Goods that are the subject of
this Invitation for Bids and (b) the term “Services” includes related services such as transportation,
insurance, after sale service, spare parts availability, etc. For purposes of this clause, “origin” means
the place where the goods are mined, grown, or produced, or the place from which the related services
are supplied. Goods are produced when, through manufacturing or processing, or substantial and major
assembly of components, a commercially recognized product is produced that is substantially different
in basic characteristics or in purpose or utility from its components.
4.3 The quoted electric equipment must comply with the Standard Electrical Power System of the
Country i.e., 220 V/50 Hz.
4
5. Cost of Bidding
5.1 The Bidder shall bear all costs associated with the preparation and submission of its bid, and the
Procuring Agency shall in no case be responsible or liable for those costs, regardless of the conduct
or outcome of the bidding process.
Preparation of Bids
10. Language of Bid
10.1 The bid prepared by the Bidder, as well as all correspondence and documents relating to the
bid exchanged by the Bidder and the Procuring Agency shall be written in English. Supporting
documents and printed literature furnished by the Bidder may be in another language provided they
are accompanied by an accurate translation of the relevant passages in English, in which case, for
purposes of interpretation of the Bid, the translation shall govern.
15.3 The documentary evidence to be submitted in the Technical Proposal for the purposes of
qualification and technical evaluation shall include:
(a) The Supplier/ agent shall have to produce letter of authorization from Manufacturer and in
case of Manufacturer, documentary proof to the effect that they are the original Manufacturer
of the required goods shall be provided.
(b) National Tax Number (NTN) and General Sales Tax Number (if applicable) with
documentary proof shall have to be provided by each Bidder in the tender.
(c) The Bidder/ Manufacturer shall submit an affidavit on legal stamp paper of Rs. 100/- that their
firm has not been blacklisted in the past on any ground by any Government (Federal,
Provincial), PESSI a local body or a public sector organization. On account of submission of
false statement the Bidder shall be disqualified forthwith and subsequently black listed.
(d) The Bidder should have minimum two years experience in the market, as specified for
relevant equipment which will be counted from the date of Authorized Letter of Principal/Local
Manufacturer. Similarly it is mandatory that the item to be quoted by the Bidder/ Manufacturer
should have already been used in different public/ private Institution/ hospitals. Documentary
proof shall have to be provided in this regard.
(e) The Bidder is required to provide with the technical proposal the name of item(s), tender
number and serial number in the exact manner as quoted in the financial proposals.
(f) The Bidder must indicate the country of origin of the goods, capacity of production of the firm
(in case of manufacturer), its financial status, necessary assurance of quality production,
Certificate(s) for conformity with International standards of Quality (original or attested
certification) and list of qualified (attested degrees or certification) technical persons along
with qualification and trainings (including details of CNIC), payroll details of staff, list of main
service, testing and calibration tools and supervisory staff working in the production and
quality control departments in the manufacturing plants.
(g) The Bidder (in case of manufacturer) shall provide a list of plant, major machinery and
equipment installed in the factory. All necessary equipment must be calibrated and validation
certificate to be included in the technical bid.
(h) In case of non-local manufacturers the list of Countries in which the specific product is
available and is in use. Information to be duly certified by the appropriate Punjab Chapter of
the Chamber of Commerce.
(i) The Bidder shall provide firms balance sheet, latest tax paid, audit inspection report (if
undertaken) and at least one year bank statement.
(j) The Bidder shall provide total list of products it supplies in the market. The Bidder shall also
supply attested copy of the first invoice for the specific product for which bidding is being
undertaken. The Bidder shall also be responsible for providing up to date and authentic
contact details of both private and public hospitals to which it has supplied over the last two
years. Bidder shall also provide supply order details over last one (01) year with complete
and up to date details of its distribution sub-offices or/and representatives.
7
Submission of Bids
19. Format and Signing of Bid
19.1 The bid shall be typed and shall be signed by the Bidder or a person or persons duly authorized
to bind the Bidder to the Contract. The person or persons signing the bid shall initial all pages of the
bid.
19.2 Any interlineations, erasures, or overwriting shall be valid only if they are initialed by the
person or persons signing the bid.
19.3 All biding documents to be duly attested (signed and stamped) by the authorized person of
company.
7. Quoted product must have one or two certification of FDA/CE/JIS/MHLW as per Yes/ No
detail mentioned against each item.
8. Performance of the firm with PESSI regarding supply of equipments fully Yes/ No
compliant with the ordered specifications (if supply order was awarded in past)
Note:
1. Only eligible firms will be scrutinized further for Part-B
3. Financial Soundness 15
i. Tax Returns (Last 3 Years) 03
(copies to be attached)
ii. Bank Certificate showing 05
annual turn over 15-20
Million
iii. Bank Certificate showing 07
annual turn over more than
20 Million
14
Note:
1. Acceptable Bids must score minimum of 70% marks.
2. Technical qualification of the participating firms against Semi Automated Bed shall be subject
to the condition that:-
i. The firm which shall obtain minimum qualifying marks during technical scrutiny of
documents shall have to provide samples of beds within 03 days of the issuance of demand
from the procuring agency.
i. If the sample is found in accordance with the advertised specifications then the Technical
Committee shall visit the manufacturing unit of the firm prior to announcement of the
technical status.
15
30.2 Any effort by a Bidder to influence the Procuring Agency in its decisions on bid evaluation, bid
comparison, or Contract Award will result in the rejection of the Bidder’s bid and subsequent black
listing. Canvassing by any Bidder at any stage of the Tender evaluation is strictly prohibited.
31.3 Notice of the rejection of any or all bids shall be given promptly to the concerned Bidders
that submitted bids.
32. Re-Bidding
32.1 If the Procuring Agency rejects all bids in pursuant to instruction to the bidder, it may call for a
re-bidding or if deems necessary and appropriate the Procuring Agency may seek any alternative
methods of procurement.
32.2 The Procuring Agency before invitation for re-bidding shall assess the reasons for rejection and
may revise specifications, evaluation criteria or any other condition for Bidders, as it may deem
necessary.
Aw ard of Contract
34. Acceptance of Bid and Award criteria
34.1 The Bidder with technically evaluated lowest financial bid, if not in conflict wit h any other law,
rules, regulations or policy of the Government, shall be awarded the Contract, within the original or
extended period of bid validity.
36 Limitations on Negotiations
36.1 Save as otherwise provided there shall be no price negotiations with the bidder having
submitted the lowest evaluated bid or with any other bidder: provided that the extent of the negotiation
permissible shall be subject to the provision of rules / regulations issued by the PPRA, 2014.
37.2 The notification of Award shall constitute the formation of the Contract.
2. Application
2.1 These General Conditions shall apply to the extent that they are not superseded by
provisions of other parts of the Contract.
3. Country of Origin
3.1 Country of manufacturer should be of USA / Europe / Japan. However, country of origin of
equipment could be from any geographical region of the world as per laws of Pakistan.
4. Standards
5. 4.1 The goods supplied under this Contract shall conform to the standards mentioned in the
bidding documents/ Technical Specifications.
6. Patent Rights
6.1 The Supplier shall indemnify the Procuring Agency against all third-party claims of infringement
of patent, trademark, or industrial design rights arising from use of the Goods or any part thereof in
the country.
18
11. Insurance
11.1 The goods supplied under the Contract shall be delivered duty paid (DDP) under which risk is
transferred to the buyer after having been delivered; hence insurance coverage is Seller’s
responsibility.
12. Transportation
12.1 The Supplier shall arrange such transportation of the goods as is required to prevent their
damage or deterioration during transit to their final destination as indicated in the Schedule of
Requirement.
12.2 Transportation including loading/ unloading of goods shall be arranged and paid for by the
Supplier, and related cost shall be inclusive in the Contract price. The addresses of destinations/
offices shall be provided at the time signing of Contract.
14. Warranty
14.1 Warranty as per detail mentioned against each item will be provided free of cost including parts
however in case of high tech equipment if mentioned in the specification, the warranty shall be three
to five years free service and parts at the installation site.
15. Payment
15.1 The method and conditions of payment to be made to the Supplier under this Contract shall be
specified in SCC. The currency of payment is Pak. Rupees which will be paid after installation and
satisfactory report by the Inspection Committee for Duty Delivered Paid (DDP)/free delivery at the
consignee end.
15.2 In case of imported goods to be procured on CFR/CPT basis; the payment will be made 100%
via establishing the LC in favor of manufacturer/beneficiary at sight and receiving shipping documents
i.e Airway Bill / Bill of lading Issuance, Inspection certificate of the manufacturer, Country of origin,
compliance of International standards of quality as per INCOTERMS of latest version. The payment
will be made in the following manner through a letter of credit to be opened by the Procuring Agency.
(A) Payment shall be made after satisfactory pre-shipment inspection at the manufacturing
site (where applicable) and the expenses to be incurred on pre-shipment inspection shall be
born by the firm. Furthermore, if charges incurred on extension of L/C to next quarter it will
be on part of contracting firm. Pre-shipment inspection shall be carried only of single item
19
15.3 The Payment for extended comprehensive warranty period (SLA) will be made by the Procuring
Agency after the end of each year which shall be counted from the date of successful completion of
standard warranty period of one year. No payment shall be made for extended comprehensive
warranty for item (s) against which the firm quoted extended comprehensive warranty free of cost.
16. Prices
16.1 Prices charged by the Supplier for goods delivered under the Contract shall not vary from the
prices quoted by the Supplier in its bid and shall remain the same till expiry of the original bid validity
period provided the Procuring Agency’s request for bid validity extension.
18. Assignment
18.1 The Supplier shall not assign, in whole or in part, its obligations to perform under this
Contract, except with the Procuring Agency’s prior written consent.
19. Subcontracts
19.1 The Supplier shall not be allowed to sublet the job and award subcontracts under this
Contract.
clause: “corrupt practice” means the offering, giving, receiving or soliciting of any thing
of value to influence the action of a public official in the procurement process or in Contract
execution.
“fraudulent practice” means a misrepresentation of facts in order to influence a
procurement process or the execution of a Contract to the detriment of the Procuring
Agency, and includes collusive practice among Bidders (prior to or after bid submission)
designed to establish bid prices at artificial non-competitive levels and to deprive the
Procuring Agency of the benefits of free and open competition.
25.1 The Procuring Agency and the Supplier shall make every effort to resolve amicably by direct
informal negotiation any disagreement or dispute arising between them under or in connection with
the Contract.
25.2 If, after thirty (30) days from the commencement of such informal negotiations, the Procuring
Agency and the Supplier have been unable to resolve amicably a Contract dispute, either party may
require that the dispute be referred to the Arbitrator for resolution through arbitration.
25.3 In case of any dispute concerning the interpretation and/or application of this Contract shall be
settled through arbitration. Commissioner, PESSI or his nominee shall act as sole arbitrator. The
decisions taken and/or award made by the sole arbitrator shall be final and binding on the Parties
26. Governing Language
26.1 The Contract shall be written in English language. Subject to GCC Clause 28, the version of the
Contract written in the specified language shall govern its interpretation. All correspondence and other
documents pertaining to the Contract, which are exchanged by the Parties, shall be written in English.
27. Applicable Law
27.1 This Contract shall be governed by the laws of Pakistan and the courts of Pakistan shall
have exclusive jurisdiction.
28. Notices
28.1 Any Notice given by one party to the other pursuant to this Contract shall be sent to the
other party in writing and confirmed to other party’s address specified in SCC.
28.2 A notice shall be effective when delivered or on the notice’s effective date, whichever is
later
Special Conditions of Contract (SCC)
1. Cash receipt (in original or photo copy) as token of having purchase the tender, must
accompany the offer.
2. Reasonable/responsible person should be deputed at the time of opening of tender.
In case of misbehavior the bid security will be forfeited besides other punitive action.
3. Offer not fulfilling any of the conditions of the bidding documents shall straightway
be rejected.
4. Rates should be quoted in foreign currency for CIF basis in case of imported
equipment’s and in Pak rupees on FOR basis in case of local equipment’s, including
all taxes (in case of FOR).
5. Offer of the firm not quoting rates both in word and figures shall be rejected.
6. Attested copy of any registration certificate held by the company may be attached.
7. The bidder will certify that the price quoted against the tender is/are not more than
the prices charged from any agency for the preceding 180 days (Government and
Private) in Pakistan and in case of any discrepancy, the bidder hereby undertakes
to refund the price charged in excess.
8. The Principal of the firms must give a certificate that the rates offered are not more
than the price mentioned in their price list for the region.
9. In case the offering firm is quoting the store of any manufacturer/ foreign principal
he should submit ‘authority letter’ from a manufacturer/ foreign principal that they
will provide after sales services through its agent and in case of change of its agent,
it will provide the services itself or newly appointed Sole agent / Sole Distributor
during the warranty period. In case of failure the institution has reserved the right
to blacklist the firm and the product of their principal.
10. The Supplier shall arrange the necessary arrangements for training of hospital staff
including doctors, technician, paramedical staff and biomedical engineers. The
supplier shall provide a factory training of quoted medical equipment to the hospital
biomedical engineer and clinical training to the doctors, if specifically demanded in
the advertised specifications/ tender.
11. The bidders must certify that:
a) Item quoted is of latest and current production model and mention the year of
manufacture.
b) Item quoted is being manufacturing batch/serial number within the last two year
of date of quotation.
c) Country of manufacturer should be of USA / Europe / Japan. However, country
of origin of equipment could be from any geographical region of the world as per
laws of Pakistan.
d) In case, any imported part or accessory being provided locally or locally
manufactured part or accessory being provided locally, then the same shall be
clearly mentioned separately in the quotation and the price of said item shall be
quoted in Pak Rupees. The payment of locally provided item shall be made
after inspection / installation report.
15. L/C will be opened in the country of origin or at the head quarter of the company. In
case of wrong information security will be forfeited and company will be black listed.
16. A rough draft of L.C by the bank through Medical Superintendent SSTH Multan
Road Lahore / Zonal Head of Procuring Agency (Zone-01) will be provided to the
local bidder who will check, sign and stamp for its confirmation, before opening of
L.C within 07-working days from date of the draft.
17. Maximum of 90 clean days shall be allowed for the shipment from the date of
opening of L.C. L.C shall be expired after 21-days in case of shipment by sea and
15 days in case of shipment by Air from the last date of shipment (clean original
documents must reach the bank within this period).
18. In case of shipment by air, then the same must reach Lahore Airport within one
week from the date of shipment mentioned on Airway Bill. Furthermore, 3 weeks will
be allowed for the clearance of the consignment and delivery at consignee end. In
case of failure to meet the time line then penalty @ 1% per week shall be imposed
upon the firm.
19. In case of shipment by sea, then the same must reach Karachi Sea Port within 45
days from the date of shipment mentioned on Bill of Lading. Furthermore, 4 weeks
will be allowed for the clearance of the consignment and delivery at consignee end.
In case of failure to meet the time line then penalty @ 1% per week shall be imposed
upon the firm.
20. The payment will be made 100% via establishing the LC in favor of
manufacturer/beneficiary at sight and receiving shipping documents/ (Bill of lading)/
Airway Bill, Invoice, Packing list, Inspection certificate of the manufacturer, Country
of origin), compliance of International standards of quality as per INCOTERMS of
latest version. The payment will be made in the following manner through a letter of
credit to be opened by the Procuring Agency. The stated amount of L.C shall be
paid to Beneficiary on production of following documents
i. Supplier’s Invoice
iii. Invoice (Original) is to be stamped / sealed (three original and three copies)
certifying Merchandise to be of origin as specified.
v. One original and two copies of the negotiable, clean, on board through Bill
of Lading / one original copy of Airway Bill marked ‘freight prepaid” and
showing Medical Superintendent SSTH Multan Road Lahore / Zonal
Head of Procuring Agency (Zone-01) as purchaser.
x. The goods supplied by them are strictly in conformity with the specifications
stipulated in the supply order.
xi. The goods have been packed and marked suitably for export transportation
by sea, by Air, by Rail and by Road, which ever are applicable to the
consignment as per order.
xii. The stores supplied by them are brand new and absolutely free from any
material or manufacturing defects.
21. All banking charges outside the country of issuance, the credit on beneficiaries
account.
22. Original Document must be presented within 21-days of issuance of Bill of Lading
and 15 days of the issuance of Airway Bill to Applicant Bank.
23. After shipment the beneficiary will advise to insurance company within 03-working
days, copy of this advice be forwarded to Bank alongwith each set of documents.
24. Intimation of arrival of the consignment at Karachi / Lahore, which ever the case is
the responsibility of the local bidder.
25. Invoice exceeding the credit amount will not be acceptable.
26. The Medical Superintendent SSTH Multan Road Lahore / Zonal Head of
Procuring Agency (Zone-01) reserves the right to wave off/relax any department
tender enquiry condition of any particular offer at any stage, in the public interest.
27. If any part is not genuine and it comes to the knowledge of the PESSI (Hospitals),
the Medical Superintendent SSTH Multan Road Lahore / Zonal Head of
Procuring Agency (Zone-01) will be entitled for re-claiming or replacing and also
damages for it. Institution reserves the rights to blacklist the firm.
28. The purchaser can negotiate the quantity, quality and allied accessories of the
respective equipment with the successful bidder before issuing the purchase order.
29. For purchase on both FOR/CIF basis 10% security will be obtained from the
successful bidder in the shape of CDR.
30. If any training/demonstration is required by the operating staff, firm will provide such
facility free of cost as described in specifications of relevant equipment’s.
31. Firm will provide the profile of each of the equipment of this tender which has already
been installed/working in any government/teaching institution.
32. The successful bidder shall be required to furnish complete details of suitable layout
foundations and any type of work therein. The hospital will only provide the source
& points, rest of material involved in installation and training will be the entire
responsibility of the firm. The firm will submit schedule of maintenance for the whole
warranty period at the time of installation. The firm shall also provide check list
indicating the detail of procedures to be carried out.
33. The plants and machinery offered shall always be completed with its normal
standard accessories fitting and toll kit and spare parts, if any.
34. Inspection authority will be the officer / committee nominated by the Medical
Superintendent SSTH Multan Road Lahore / Zonal Head of Procuring Agency
(Zone-01).
35. 100% payment will be made by the Medical Superintendent SSTH Multan Road
Lahore / Zonal Head of Procuring Agency (Zone-01) on production of satisfactory
inspection and installation report duly signed by M.S of respective hospital in case
of purchase on F.O.R. Basis.
36. All applicable charges for custom clearance including detention charges if any,
insurance and transportation to the consignee’s end shall be borne by the firm
however the necessary documents for custom clearance shall be provided by
the Medical Superintendent SSTH Multan Road Lahore / Zonal Head of
Procuring Agency (Zone-01) subject to the request submitted by the firm, in
the same regard.
37. In case of non-clearance of the stores due to the late receipt of or incomplete
shipping documents (not being in-conformity with the contract) the supplier
will be fully responsible for payment of demurrage etc. and they will also be
held responsible for all consequences arising from such incomplete
documents.
Execution of Warranty
a. A Log Book for the medical equipment which needs regular after sales
services shall be maintained by the Supplier Service Engineer in
consultation with the end user department. This will include the name
of the equipment, down time, preventive maintenance schedule,
replacement of parts, down time etc.
b. The warranty period will be 2-5 years according to specifications of
relevant equipment’s and the firm will be responsible for replacing of
equipment/store.
c. Free of charges spares will be provided in case of repairs under entire
warranty period. Further the firms will ensure supply of spare parts for
05 years after the expiry of warranty period. In case of failure, the firm
will be blacklisted. Furthermore, Manufacturer shall also issue certificate
ensuring the availability of spare parts & accessories of offered system
for the next 5 years.
d. The contracting firm would supply spare parts/accessories at reasonable
rates not more than printed price list for the region by the principal after
warranty period.
e. Installation will be made by the supplier and its cost will be borne by the
firm. The period of warranty will start from the date of installation and
commissioning duly signed by the inspection committee.
f. The maintenance will be the responsibility of the manufacturer / their
agent. An annual optimal uptime of 95% is considered as acceptable
level of performance.
g. Software and hardware up gradation of the computing system should be
carried out as available during warranty period as recommended by the
manufacturer. Standard Bidding Document – Purchase of equipment
and machinery - Year 2019-20.
h. Manufacturer / Supplier shall be responsible for rectifying with all
possible speed at their own expense any defect or fault in the system
which may develop at any time during installation, commissioning
period.
i. Uptime shall be defined as the time available to the user for doing
procedures/ data acquisition and processing during working hours
throughout the year.
j. Manufacturer /Supplier shall check system performance during and
after every 4-months. An “Optimal Percentage” will be calculated by
dividing “System in Service” hours by hours available, both measured on
the basis of working hours as detailed above.
k. If the uptime percentage for the measurement period (04-months) shall
fall short of 95% the following formula will be applied to determine
additional days in the warranty / service contract period.
address
……………………………..
MEDICAL SUPERINTENDENT
SOCIAL SECURITY TEACHING
HOSPITAL MULTAN ROAD
LAHORE / ZONAL HEAD OF
PROCURING AGENCY (ZONE-
01)
.
Manufacturer’s Authorization Form
[See Clause 3.2 of the Instruction to Bidders]
To: [ n a m e o f P r o c u r i n g A g e n c y ]
WHEREAS [name of the Manufacturer] who are established and reputable Manufacturers of [name
and/or description of the goods] having factories at [address of factory] do hereby authorize [name
and address of Supplier/ Agent] to submit a bid, and subsequently negotiate and sign the Contract
with you against I FB No. [reference of the Invitation to Bid] for the goods manufactured by us.
We hereby extend our full guarantee and warranty as per Clause 15 of the General Conditions o f
Contract for the goods offered for supply by the above firm against this Invitation for Bids.
Note: This letter of authority should be on the letter head of the Manufacturer and should be
signed by a person competent and having the power of attorney to bind the Manufacturer. It
should be included by the Bidder in its bid.
CONTRACT FORM
THIS CONTRACT is made at _______on ___day of 2020, between the Medical Superintendent
SSTH Multan Road Lahore / Zonal Head of Procuring Agency (Zone-01) (hereinafter
referred to as the SSTH Multan Road Lahore (Zone-01) of the first Part: and M/s. (Firm
Name) a firm having its registered office at (address of the firm) (hereinafter called the “Supplier)
of the Second Part (hereinafter referred to individually as “Party and collectively as the “Parties”).
WHEREAS the Medical Superintendent SSTH Multan Road Lahore / Zonal Head of Procuring
Agency (Zone-01) invited bids for procurement of goods, in pursuance where of M/s.
(_________) being the Manufacturer/authorized Supplier/authorized Agent of (Item name ) in
Pakistan and ancillary services offered to supply the required item (s); and Whereas the SSTH
Multan Road Lahore (Zone-01) has accepted the bid by the Supplier for the supply of (Item
name) and services in the sum of Rs. (amount in figures and words) cost per unit, the total amount
of (quantity of goods) shall be Rs. (____________).
IN WITNESS Whereof the parties hereto have caused this contract to be executed at
_____________(the place) and shall enter into force on the day, month and year first
above mentioned.
2. 1.
2.
BID FORM
Date: _________________
Tender No._____________
To
MEDICAL SUPERINTENDENT
Social Security Hospital Multan Road Lahore /
ZONAL HEAD OF PROCURING AGENCY (ZONE-01)
Respected Sir/Madam
Having examined the Bidding Documents, the receipt of which is hereby duly
acknowledged, we the undersigned, offer the supply and deliver the goods specified
in and in conformity with the said Bidding Documents for the sum of (Total Bid
Amount) (Bid Amount in words) or such other sums as may be ascertained in
accordance with the schedule of Prices attached herewith and made part of this bid.
We undertake, if our bid is accepted, to deliver the goods in accordance with the
delivery schedule specified in the schedule of requirements.
If our bid is accepted, we shall obtain an unconditional guarantee of a bank in the sum
of 10% percent of the Contract price for the due performance of the Contract, in the
form prescribed by the SSTH Multan Road Lahore / Procuring Agency (Zone-
01).
We agree to abide by this bid for a period of (number) days from the date fixed for bid
opening under ITB Clause 18 of the instructions to Bidders and it shall remain binding
upon us and may be accepted at any time before the expiration of that period. Until a
formal Contract is prepared and executed, this bid, together with your written
acceptance thereof and your notification of award, shall constitute binding Contract
between us.
We understand that you are not bound to accept the lowest or any bid you may receive.
Name and address of bidder
(If none, state “none”
Signature
(in the capacity of)
2.
3.
Grand Total
Note: In case of discrepancy between unit price and total, the unit price shall prevail.
Price Schedule
Name of Bidder______________________________________________________________________
Name of
Unit
Sr. No. Item Make/Model Specifications Total
Price Freight
(As listed in (As listed in and country of (Complete Quantity Insurance Cost
(FOB) Charges (foreign
invitation of invitation of Manufacturer Details) (foreign currency)
currency)
bid) bid) and origin
1.
2.
3.
Grand Total
Note: In case of discrepancy between unit price and total, the unit price shall prevail.
Foreign currency rate will be considered on the date of opening of financial bid as per
rate of state bank.
LIST OF BIO MEDICAL EQUIPMENTS TO BE PROCURED FOR SSTH (ZONE-01), MULTAN ROAD LAHORE
(2019-20)
INVITATION OF BID
SR. NO. Name of Station Whers Required Estimated CIF / FOR
Equipment / SSTH LAHORE RAIC SSH SSH SSH Total Cost Basis
Instrument SHAHDR SHAIKHUPU KOTLAKH Quantity
A RA PAT
1. Ambulatory B.P 1 1 2000000 CIF
Monitoring
(RAIC-01)
2. ANAESTHESIA 1 1 2500000 CIF
MACHINE with
ventilator
(RAIC-1)
3. Cabinets Bed side 20 20 100000 FOR
(RAIC-20)
4. Cardiac 3 3 1500000 CIF
Defibrillator
With Internal and
External Pacing
pads
(RAIC-02+(01
Only with
External Pacing
Pads)
5. Cardiac Monitor 20 20 8100000 CIF
Noninvasive with 1200000
Central Monitoring
System
(RAIC-10+8)
(Central Monitor-
02)
6. Cardiac Monitors 4 4 1800000 CIF
Invasive with
central
monitoring
( RAIC-4)
7. CR System 1 1 5000000 CIF
Complete with
Printing Solutions
for x ray Viewing
and Printing
(RAIC-1)
8. ECG Machine 5 5 750000 FOR
Three Channel
(RAIC-3+2)
9. Electro Surgical 1 1 500000 CIF
Unit Bipolar 400
Watt
( RAIC-1)
10. Crash Cart / 2 2 2400000 CIF
Emergency
Trolleys
(imported) With
Defibrillator
(RAIC-02)
11. Intra-Aortic 1 1 3000000 CIF
Balloon Pump
(RAIC-1)
12. Minimally Invasive 1 1 10000000 CIF
Cardiac Surgery
Instrument Set
with Vats System
with 2 Cameras
and Continuous
co2 Insuflator
(RAIC-1)
13. Negative and 1 1 2000000 CIF
Positive Pressure
Ventilation System
Units (02 units
each)
(RAIC-1)
14. Portable 1 1 200000 FOR
Emergency Light
Single Dome
(Mobile)
(RAIC-1)
15. Portable 1 1 2500000 CIF
Echocardiography
Machine Complete
with Trolley and
sine wave UPS
(RAIC-1)
16. Semi-Automatic 12 12 8400000 CIF
Electrical Beds
with Bed side
Cabinet, Over Bed
Table, Mattress
( RAIC-12)
17. Portable Stand 12 12 20000 FOR
type BP
Apparatus (02), 80000
Portable I/V
Stand (08), 30000
Oxygen Cylinder
Complete with
Mobile Stand and
Gauge (02)
18. Hydraulic 2 2 800000 FOR
Cardiac
Stretchers
Imported
Complete with 02
Cylinder and
Gauges
(RAIC-2)
19. Suction Machine 1 1 250000 CIF
Heavy Duty
(RAIC-01)
20. Surgical Loops One 3 3 750000 CIF
Each with
Magnification of
2.5, 3.5, 4.5
(RAIC-3)
21. Syringe Pumps 16 16 2400000 CIF
(RAIC-16)
22. Temporary Pace 4 4 480000 FOR
Maker
(RAIC-2+2)
23. Vacuum Assisted 1 1 1000000 FOR
Venous Drainage
on line Blood
System
(RAIC-1)
24. Video 4 4 800000 FOR
Laryngoscope
(Glide Scope)
(RAIC-3+1)
25. Air Mattress 4 4 400000 FOR
(SSTH-4)
26. ANAESTHESIA 4 2 6 15000000 CIF
MACHINE with
ventilator
(SSTH-4, SSHD-2)
27. Apheresis 1 1 5000000 CIF
Machine (Cell
Separator)
(SSTH-1)
28. Auto Refracto 1 1 2000000 CIF
Meter with IOL
Master
(SSTH-1)
29. Autoclave 1 1 800000 FOR
Machine
(SSTH-1)
30. Automated 1 1 10000000 CIF
Chemistry
Analyzer
(SSTH-1)
31. Automated tissue 1 1 10000000 CIF
processor
(SSTH-1)
32. Automatic Tissue 1 1 2500000 CIF
Embedding
System
(SSTH-1)
33. Automatic Tissue 1 1 3500000 CIF
Steiner
(SSTH-1)
34. B. Scan 1 1 2500000 CIF
(SSTH-1)
35. Baby Suction 2 2 100000 FOR
Machine
(SSTH-2)
36. Baby Warmer 4 4 4800000 CIF
(SSTH-4)
37. Beds (Manual) 20 20 1400000 FOR
03 Folwer with
side cabinet, over
bed table Raxine
medical grade
mattress and
attendant bench
(Complete set)
(SSTH-20)
38. Cardiac 1 2 3 1500000 CIF
Defibrillator
With Internal and
External Pacing
pads
(SSTH-1,SSHD-2)
39. Cardiac Monitor 28 10 2 40 18000000 CIF
Noninvasive with
Central Monitoring
System
(SSTH-28,
SSHD-10,SKP-2)
40. Cardiac Monitors 16 1 17 7650000 CIF
Invasive with
central
monitoring
(SSTH-16,
SKP-1)
41. Centrifuge 3 3 1500000 FOR
Machine
(SSTH-3)
42. Cervical + 1 1 700000 FOR
Lumber Traction
Unit
(SSTH-1)
43. Choledoco scope 1 1 2000000 FOR
(SSTH-1)
44. Color Doppler 1 1 8000000 CIF
with Probe
Linear, Convex,
TVS
(SSTH-1)
45. Combo Unit (Tens 1 1 500000 FOR
+ Ems) Desktop
(SSTH-1)
46. CPM (Contour 1 1 500000 FOR
Passive Motion
Machine)
(SSTH-1)
47. CTG Machine 2 2 4 1400000 FOR
(SSTH-2,SSHD-2)
48. Delivery Table 2 2 1400000 FOR
(SSTH-2)
49. Dental Unit 1 1 2000000 CIF
(SSTH-1)
50. Dental X-Ray 1 1 500000 FOR
(SSTH-1)
51. Dialysis Chair 32 32 25600000 CIF
(SSTH-32)
52. Dialysis Machine 24 24 40800000 CIF
(SSTH-24)
53. Dialysis Machine 1 1 2000000 CIF
(Portable)
(SSTH-1)
54. Dialysis Machine 4 4 8000000 CIF
with WRO
System
(SSTH-4)
55. Drill System 1 1 4000000 CIF
Electric and
Battery Operated
with Complete
Accessories
(SSTH-1)
56. ECG Machine 4 4 600000 FOR
Three Channel
(SSTH-4)
57. Electric 1 1 350000 FOR
Treadmill 3.5HP
(SSTH-1)
58. Electro Surgical 5 5 2500000 CIF
Unit Bipolar 400
Watt
(SSTH-5)
59. Eliza Fully 1 1 5000000 CIF
Automated
(SSTH-1)
60. Emergency 6 6 7200000 CIF
Trolleys
(imported) With
Defibrillator
(SSTH-6)
61. Fluoroscopy X- 1 1 12500000 CIF
Ray Unit 1000
MA
(SSTH-1)
62. Gastroscope High 1 1 2000000 CIF
End with Digital
Camera
(SSHD-1)
63. Hematology 1 1 1200000 FOR
Analyzer
(SSTH-1)
64. Head Light with 3 3 1200000 FOR
Magnifying Loops
(SSTH-3)
65. ICU Ventilators 9 2 11 33000000 CIF
(SSTH-9,SSHD-2)
(01 Ventilator for
Neonatal Nursery
with Tidal
Volume 5ml to
2000ml)
66. Imaging Intensifier 1 1 2 10000000 CIF
(C-ARM)
(SSTH-1,SSHD-1)
67. Keratometer 1 1 1000000 FOR
(SSTH-1)
68. Laparoscope with 1 1 10000000 CIF
All Accessories
(SSTH-1)
69. Laparoscopic Non 3 3 600000 FOR
Traumatic Grasper
/ Clipper Crocodile
Forceps
(SSHD-3)
70. Laser Printer for 1 1 2500000 CIF
Digital X-Ray
(SSTH-1)
71. Microscope 3 3 1350000 CIF
(SSTH-3)
72. Microtome 1 1 1000000 CIF
Automated
(SSTH-1)
73. Nephroscope 1 1 500000 FOR
24cm
(SSTH-1)
74. O.T Light 1 1 75000 FOR
(Portable)
(SSHD-1)
75. Operating 1 1 2500000 CIF
Microscope for
Eye
(SSTH-1)
76. Operation 3 3 4500000 CIF
Theater Light
Double Doom
(SSTH-3)
77. Operation 3 3 10500000 CIF
Theater Table
Electrical
(SSTH-3)
78. O.T Light in Labor 1 1 200000 FOR
Room Portable
Single Dome
(Mobile)
(SKP-1)
79. Phaco 1 1 3000000 CIF
Emulsification
Machine
(SSTH-1)
80. Platelet Incubator 1 1 1000000 FOR
+ Agitator
(SSTH-1)
81. PT / APTT 1 1 400000 FOR
Analyzer
(SSTH-1)
82. Pulse Oximeter 4 4 260000 FOR
with Probe
(SSTH-4)
83. Resectoscope 1 1 2700000 CIF
With Telescope 30
Light Sources &
Ellic Evacuator
Light Cable
(SSTH-1)
84. Semi-Automatic 14 8 4 26 18200000 CIF
Electrical Beds
with Bed side
Cabinet, Over Bed
Table, Mattress
(SSTH-14,
SSHD-8,SKP-4)
85. Short Wave 1 1 1500000 CIF
Diathermy
(SSTH-1)
86. Slide Folder 1 1 74000 FOR
(SSTH-1)
87. Slit Lamp 1 1 2000000 FOR
(SSTH-1)
88. Stretcher Trolley 6 6 1500000 FOR
Imported
(SSTH-6)
89. Suction Machine 2 2 50000 FOR
(SSTH-2)
90. Suction Machine 9 2 11 2750000 CIF
Heavy Duty
(SSTH-9) (SKP-2)
91. Syringe Pumps 73 73 10950000 CIF
(SSTH-73)
92. Ultrasound 1 1 8500000 CIF
Machine Color
Doppler
(SSTH-1)
93. Ultrasound 1 1 2500000 CIF
Machine Portable
(SSTH-1)
94. Ultrasound 1 1 700000 FOR
Physiotherapy
(SSTH-1)
95. Ureterorenosco 1 1 900000 FOR
pe
(SSTH-1)
96. Ventilators 4 4 12000000 CIF
(Portable)
(SSTH-4)
97. Wax Bath 1 1 300000 FOR
Therapy Unit
(SSTH-1)
98. WRO System for 1 1 1000000 FOR
24 Dialysis
Machines
(SSTH-1)
99. X-Ray Machine 1 1 6500000 CIF
300 MA Mobile
(SSTH-1)
100. X-Ray Scanner 1 1 1200000 CIF
with LCD for
Dental
(Complete
system)
(SSTH-1)
101. Blood Bank 1 1 1000000 FOR
Refrigerator 80 to
100 Bags Capacity
/ Blood Storage
Cabinets
(KLP-01)
102. Immunoassey 1 1 5000000 CIF
(Automatic) for
Screening
(KLP-01)
103. Cryocentrifuge 1 1 1500000 CIF
with Refrigerator
02 Bag Capacity
(KLP-01)
104. Cell Separator 3 3 100000 FOR
Stands
(KLP-03)
105. Platelet Incubator 1 1 500000 CIF
with Agitator
(KLP- 01)
106. Blood Bag Sealer 1 1 450000 FOR
(KLP-01)
107. Freezer for FFPS 1 1 500000 FOR
(-20c-50c) /
Plasma Storage
Freezer
(KLP-01)
108. Centrifuge 2 2 500000 CIF
Machine
(KLP-02)
109. Blood Bag Shaker 3 3 200000 FOR
(Digital)
(KLP-03)
110. Serocentrifuge 1 1 600000 FOR
Machine
(KLP-01)
111. Water Bath 1 1 300000 FOR
(KLP-01)
Total 441519000/-
FINAL CONSOLIDETED DEMANDS AND TECHNICAL SPECIFICATIONS OF SOCIAL SECURITY HOSPITALS
(ZONE-01)
WARRANTY 3 YEARS
Country of origin Local / Imported
4. Cardiac Defibrillator 2+1 Cardiac Defibrillator With Internal And External Pacing Pads
With Internal and
External Pacing pads Biphasic transthoracic (external) defibrillator with LCD colour display
Synchronized output with ECG.
(RAIC-02+(01 Only Energy selection & delivery on control panel and paddles for external defibrillation.
with External Pacing Energy selection and delivery on control panel for internal defibrillation.
Charging Indicator
Pads)
The energy range should be adjustable for peads and adults up to 200Joules.
Charging Time for full energy should be less than 05 sec
(CIF BASIS) Screen Size of approx. 5 inch colored.
Display of HR, ECG through paddles and Lead I.II & III patient cable.
Built in recorder for printing of full summery on standard 50mm paper.
Alarms for High and low Heart rate, low battery warning.
Built-in Rechargeable battery with charger for minimum 50 shocks at max energy.
Auto tester/self check.
External Paddles (Adult, Paed, Neonate)
AED facility with cable.
Pacing facility
AC 220V / 50Hz operated.
Accessories:
Complete with standard accessories, including reusable type Adult, Paediatric & Neonatal
sensors
Original trolley/cart
Optional:
50 Qty of Reusable sensors
Internal Paddle(Adult, Paed, Neonate)
Charging Time for full energy should be less than 07 sec
ETCo2
Spo2
Disposable pacing pads
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
5. Cardiac Monitor 10+8 CARDIAC MONITOR NON INVASIVE WITH CENTRAL MONITORING
Noninvasive with
Central Monitoring For Adults & Peads
System For monitoring patients vital signs.
(RAIC-10+8)
Operating Features and Characteristics:
(Central Monitor-02) Non fade TFT,LCD color display
Electro-surgical interference suppression/protection
(CIF BASIS) Defibrillator protection
Freeze and cascade facility.
Waveform trache spee: 25 & 50 mm/sec.
Screen size: min. 15” TFT, LCD color display.
Parameters:
ECG :
Numeric: heart rate.
Waveform : real time and freeze ECG trace
Minimum 6 waveforms
NON-INVASIVE BLOOD PRESSURE (NIBP):
Method: oscillometric principle
Numeric: systolic, diastolic and mean pressure
Selectable auto inflate interval settings
Rising cuff/continuous pressure display.
Reusable cuff for adult & paeds
TEMPERATURE:
Numeric: temperature selectable in ºC/ºF.
PULSE OXIMETRY:
Numeric: 0-100% oxygen saturation measuring range.
Waveform-plethysmograph pulse.
Reusable sensor electrode.
ARRHYTHMIA ANALYSIS:
Arrhythmia analysis and ST analysis.
RESPIRATION:
Breath rate display and settable apnea alarms.
Sweep speed; 6.25, 12.5 mm/sec.
Numeric: temperature selectable in ºC/ºF.
Ac 220v/50HZ
Built-in rechargeable battery for at least 1.5-2 hour.
Accessories:
The system must be complete with all sensors, probes, cables or any
other accessories required for measuring all the above
selected parameters.
Optional:
50 Qty of Reusable sensors
Capnography
Printer 2 channels
Mounting stand preferably imported or high quality (S.S 304L) Local
with lockable draws
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
Multi-channel central station for 8/16/24 bedside monitors. (Procuring agency will specify the
exact requirement)
Operating features and characteristics:
Colored monitor
Resolution minimum 1024 x 1024
Laser printer
For connection to: Bedside monitors with 19” TFT central station monitor.
Parameters :
Selectable display of all parameters of bedside monitors
As selected.
Alarms :
All parameters alarms on central station monitor with bed no.
Identification.
All alarms of each bedside monitors selectable from central workstation.
Full Disclosure :
Other Features:
Ac 220v / 50Hz.
Keyboard and mouse
Trend data: graphical and tabular
Arrhythmia analysis feature.
Operating Requirements:
Built-in battery and charger for at least 2 hours on ac power at full parameter or imported full
sine wave ups.
Accessories:
Optional:
Qty of Reusable sensors
HIS & RIS Connectivity
High definition Slave monitor screen size:32” or larger
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
6. Cardiac Monitors 4 CARDIAC MONITOR INVASIVE WITH CENTRAL MONITORING
Invasive with central
monitoring Modular bedside monitor for Adult / Neonates/ Peads. The monitor should take different
modules for display of vital sign monitor of Adult /Neonate/Peads.
( RAIC-4) Operating Features and Characteristics:
Non fade TFT,LCD color display
Electro-surgical interference suppression/protection
(CIF BASIS)
Defibrillator protection
Freeze and cascade facility.
Waveform traces speed; 25 & 50mm/sec.
Screen size: min. 17” TFT, LCD color display.
Capability to interface with LAN/WLAN for data transfer
Parameters in module form:
ECG:
Numeric: heart rate.
Waveform : Six Wave forms minimum, real time and freeze ECG trace
NON-INVASIVE BLOOD PRESSURE (NIBP):
Method: Oscillometric principle
Numeric: systolic, diastolic and mean pressure
Selectable auto inflate interval settings
Rising cuff/continuous pressure display.
TEMPERATURE:
Numeric: temperature selectable in ºC/ºF.
PULSE OXIMETRY:
Numeric: 0-100% oxygen saturation measuring range.
Waveform-plethysmograph pulse
Reusable sensor electrode.
Reusable cuff of all sizes
ARRHYTHMIA ANALYSIS:
Arrhythmia analysis and st analysis.
RESPIRATION:
Breath rate display and settable apnea alarms.
Sweep speed; 6.25, 12.5 mm/sec.
OTHER FEATURES:
Trend data; graphical and tabular
ALARMS:
High & low (settable) on all parameters
Visual and audible indication of alarms.
OPERATING REQUIREMENTS :
Ac 220v/50HZ
Built-in rechargeable battery for at least 2 hour ac power failure at full parameter.
Accessories:
The system must be complete with all sensors, probes, cables or any other accessories required
for measuring all the above selected parameters for neonates / peads and Adults.
Optional:
IBP two Channel module , Capnography (EtC02) module
EEG Module
Printer Two Channel
50 Qty of Reusable sensors
Mounting stand preferably imported or high quality (S.S 304L) Local with lockable
draws
Warranty: 03 years
Country of Manufacturing & Origin of equipment should be:
USA, EUROPE & JAPAN.
Multi-channel central station for 8/16/24 bedside monitors. (Procuring agency will specify the
exact requirement)
Operating features and characteristics:
Colored monitor
Resolution minimum 1024 x 1024
Laser printer
For connection to: Bedside monitors with 19” TFT central station monitor.
Parameters :
Selectable display of all parameters of bedside monitors
As selected.
Alarms :
All parameters alarms on central station monitor with bed no.
Identification.
All alarms of each bedside monitors selectable from central workstation.
Full Disclosure :
Other Features:
Ac 220v / 50Hz.
Keyboard and mouse
Trend data: graphical and tabular
Arrhythmia analysis feature.
Operating Requirements:
Built-in battery and charger for at least 2 hours on ac power at full parameter or imported full
sine wave ups.
Accessories:
Optional:
Qty of Reusable sensors
HIS & RIS Connectivity
High definition Slave monitor screen size:32” or larger
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
7. CR System Complete 1 TECHNICAL SPECIFICATIONS
with Printing Solutions One Digitizer / Reader unit, multiple plates type System for General Radiography &
for x ray Viewing and Mammography.
Printing Should be capable to read X-Ray exposed Rigid Imaging Plates (IPs) of all standard sizes in
inches/cm.
(RAIC-1) The productivity of reading / digitizing should be minimum 100 IPs/hour in mixed sizes.
Reading function should be 100 ìm and 50 ìm
Should support resolution of 10 pixels / mm.
(CIF BASIS)
One CR console for Radiographer with medical application software licenses.
An additional workstation for Radiologist with 1TB HDD.
Should be capable to enter & edit Patient ID.
Should support Image Preview & Quality Assurance.
Should have Mammography Software License. (Procuring agency to specify)
Should have temporary storage capacity of up to 2,000 or more images.
Should comply with DICOM Conformance 3.0 and have standard functions for future
connectivity with PACS or other DICOM modalities inclusive of Print, Storage, etc.
DICOM 3.0 compliant Grayscale Dry LASER Printer with 3 online sizes.
Should have minimum productivity of 150 films/ hour in mixed sizes.
Printer should be capable of printing 08x10, 10x12, 11x14, 14x14 & 14x17 size films.
Minimum resolution should be10 pixels/mm with 12-bit gradation.
Imaging Plates (IP) and Cassettes
DICOM 3.0 for Send, Receive, Archive, Retrieve and Print.
POWER REQUIREMENT:
Single phase with line voltage of 220V, 50 Hz
Accessories:
Imaging Plates (IP) and Cassettes
14x17inch (Set of IPs & Cassettes
10x12inch (Set of IPs & Cassettes)
08x10inch (Set of IPs & Cassettes)
18x24cm (Set of IPs & Cassettes) for Mammography
24x30cm (Set of IPs & Cassettes) for Mammography
15x 30 cm (Set of IPs & Cassettes) for OPG
Online UPS 10 KVA with ten minutes back up time.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
8. ECG Machine Three 3+2 TECHNICAL SPECIFICATIONS
Channel Three channel ECG on at least 5 inches LCD display.
Display of Three channel ECG simultaneously.
(RAIC-3+2) Automatic Operation
Variable gain: 1/2, 1, 2 cm/mV
(FOR BASIS) Thermal recorder for printing out of Three channels simultaneously
Interpretation Software.
Recording Trace speed: 10, 25 and 50 mm/sec
Muscle artifact and AC (50Hz) interference filters
Defibrillator protection
Built in AC Supply and battery operation with 30min backup
Built-in AC interference, Noise filter and Baseline connection.
Capability to interface with LAN/WLAN for data transfer
Paper Rolls, 50
Accessories:
Complete with standard accessories, including separate patient cables for Adult use with re-
usable electrodes
Optional:
Mobile Cart (Imported)
No. of Electrodes
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
9. Electro Surgical Unit 1 TECHNICAL SPECIFICATIONS
Bipolar 400 Watt Microprocessor based electrosurgical unit for normal and under water cutting usages.
Automatic self-test function.
( RAIC-1) Operation in radio frequency range.
Controls for cutting, coagulation, spray and blends.
(CIF BASIS) Monopolar cutting power of 400 watts.
Bipolar cutting power of 80 watts.
Mono polar coagulation power of 100 Watts.
Bipolar coagulation power of 50 Watts.
Spray coagulation mode.
Different gradations of blending of cutting and coagulation power.
Digital display of all controls and set values of cutting and coagulation power.
Audio and visual alarms.
220V, 50 Hz.
Accessories:
Monopolar handle with cord.
Bipolar forceps with cord.
Trolley having anti-static lockable wheels.
Attachment for monopolar coagulation.
Knife electrode Qty 10
Surgical electrode, ball-shaped. Qty 10
Needle electrode. Qty 3
Ball electrode. Qty 10
Bipolar coagulation forceps. Qty 4
Reusable silicon patient plate. Qty 10
Double paddle foot switch, explosion proof.
Trolley with lockable antistatic castors.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
10. Crash Cart / 2 EMERGENCY TROLLEY / CRASH CART FULLY EQUIPPED
Emergency Trolleys Stainless steel / ABS top.
(imported) With Three or more drawers
Defibrillator Lower cupboard with central locking / securing all drawers and cupboard
Operated by cupboard door and use of security seals
(RAIC-02) Double hook stainless steel I.V. Pole
Push handle
(CIF BASIS) Quality cushion castors (2 x braking)
2 x stainless steel cylinder holders / strap
Cardiac board 600 x 400 x 55mm with stainless steel housing brackets at rear of
trolley.
Universal rail system fitted to width of trolley.
Accessories :
Aneroid sphygmomanometer with Peads & infant Velcro cuff and rail clamp
Electronic timer and rail clamp
Venturi suction unit with O2 outlet and 2.0 liter jar
Suction tube and connecting tubing
O2 flow meter fitted to O2venturi outlet 0-15 lpm
Pin index regulator with outlet for connection to remote venturi hose and O2 outlet
Oxygen cylinder Qty 01 fitted with trolley
Intubation set comprising:
Macintosh laryngoscope with 4/5 blade set
Magill introducing forceps
Paeds resuscitator
Disposable E.T. tubes Set
Guedel airways
Pen torch
Artery forceps
Dressing scissors
Set of plastic tubes
Examination light to rail clamp
Defibrillator:-
Biphasic transthoracic (external) defibrillator with LCD colour display
Synchronized output with ECG.
Energy selection & delivery on control panel and paddles for external defibrillation.
Energy selection and delivery on control panel for internal defibrillation.
Charging Indicator
The energy range should be adjustable for peads and adults up to 200Joules.
Charging Time for full energy should be less than 05 sec
Screen Size of approx. 5 inch colored.
Display of HR, ECG through paddles and Lead I.II & III patient cable.
Built in recorder for printing of full summery on standard 50mm paper.
Alarms for High and low Heart rate, low battery warning.
Built-in Rechargeable battery with charger for minimum 50 shocks at max energy.
Auto tester/self check.
External Paddles (Adult, Pead, Neonate)
AED facility with cable.
Pacing facility
AC 220V / 50Hz operated.
Accessories:
Complete with standard accessories, including reusable type Adult, Pediatric &
Neonatal sensors
Original trolley/cart
Optional:
Qty of Reusable sensors
Internal Paddle(Adult, Pead, Neonate)
Charging Time for full energy should be less than 07 sec
ETCo2
Spo2
Disposable pacing pads
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
11. Intra-Aortic Balloon 1 Intra Aortic Baloon Pump
Pump
TECHNICAL SPECIFICATIONS
(RAIC-1) Self contained Fiber optic based intra aortic balloon pump having mobile console with ECG.
Amplifier with possible selection 5 leads arterial blood pressure amplifier. Discriminative
Triggering circuit to command balloon actions on patient’s ECG arterial blood pressure curve or
(CIF BASIS)
internal simulator 80 BPM. Color graphic displays at least of 10” for display of arterial and
pressure heart rate balloon volume used and alarm conditions with trouble shooting
procedures. Wave form displays for ECG, arterial pressure and balloon pressure on three
channel memory type oscilloscope. Fall safe system. V Pacing switch. Progressive viewing
sequence. Integrated battery power supply to take patient to catheterization labs, operating
theatre or other hospital: 60 minute autonomy. CO2 / helium tank wrench. 5 lead ECG cable,
male connector pressure, transducer, adopter, chart recorder.
220 V, 50 Hz, Ac.
System should be complete to display all the parameters.
Accessories:
Complete with standard accessories
One spare set of patient cable.
Optional:
50 Qty of Reusable sensors
Disposable balloon catheters of varying sizes for use with the pump 25 nos.
Automatic in vivo calibration
Automatic and manual helium refilling
Control of deflation point in automatic mode
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
12. Minimally Invasive 1 Minimally Invasive Cardiac surgery Instrument Set with Vats System With 02 Cameras and
Cardiac Surgery Continuous CO2 Insufflator 02 regular battery operated sternum saw and 01 redo sternum
Instrument Set with Vats saw
System with 2 Cameras Scalpel handle Qty 02 Length 130-145 mm, for blade size 18-36, straight tip
and Continuous co2 Scalpel handle Qty 01 Length 155-165 mm, correspond with English no. 05 for blade
Insuflator size 10-15, straight tip
Micro scalpel handle Qty 01 Casper type, micro scalel handel, length 150-160 mm,
for micro scalpel blades
(RAIC-1)
Metzenbaum Scissors Qty 01 Tonnis Adson Type, length 170-180 mm, 1/1 curved,
tungsten carbide edges, wave cut.
(CIF BASIS)
Metzenbaum Scissors Qty 01 Metzenbaum, length 195-205 mm, 1/1 curved, tungsten
carbide edges
Metzenbaum Scissors Qty 01 Metzenbaum, length 150-180 mm, curved blades, wave
cut
Metzenbaum Scissors Qty 01 Metzenbaum, length 220-250 mm, 1/1 curved, wave cut,
dissecting scissor
Forward Potts Qty 02 Jacobson type, Working length 168-175 mm, blade 45o, micro
sccissors, flat handle.
Backward Potts Qty 02 Puskas type jackabson, micro sccissors, Length 190-210 mm,
blade angeled for nano blades, flat handel
Forward Jackabson Micro Sccissors Qty 01 Working length 190-210 mm, blade angel
45o, blade length 10 mm
Dietrich Sccissors Qty 01 Length 175-185 mm, 125o, blade length 8 mm
Dietrich Sccissors Qty 01 Length 175-185 mm, angel 45o, blade length 10 mm
Mayo Sccissors Qty 02 Length 165-175 mm, straight
Mayo Sccissors Qty 02 Length 165-175 mm, curved 1/1
De Backey Forceps Qty 02 Atraumatic, Working length 145-155 mm, tip length 2.8 mm
De Backey Forceps Qty 02 8”, Length 190-210 mm, tip length 1.5 mm
De Backey Forceps Qty 02 Length 190-210 mm, tip 2.8 mm
Fine Ring Forceps Titanium material Qty 02 Length 200-215 mm, ring tip vascular
forcep, tip size 1 mm straight, diamond dust tips
Fine Ring Forceps Titanium material Qty 02 Length 180-190 mm, ring tip 1 mm
straight, dia dust coating and counter balance handle
Tooth Forcep Qty 02 Length 175-187 mm, tissue forcep standard pattern
Hegar Needle Holder Qty 02 Length 200-210 mm, tip size 0.5 mm, diamond dust
Hegar Meo type
Hegar Needle Holder Qty 02 Length 180-190 mm, tip size 0.5 mm, diamond dust
Hegar Meo type
Needle Holder Qty 02 Length 145-155 mm,
De Backey Needle Holder Qty 01 Length 175-185 mm, de backey needle holder, tip
size 0.4 mm
Heaney Type Needle Holder Qty 01 Length 195-205 mm, tip 0.5 mm
Mosquito Clamp Fine Qty 06 Baby mosquito Hartman type, length 95-105 mm, 1/1
curved with tooth tip
Mosquito Qty 04 Halsted Mosquito, length 123-127 mm, straight, toothed tip
Wire holding clamp straight Qty 10 Spencer wells type, hemostatic forceps, length
173-177 mm
Towel clamp Qty 06 Towel clamp, length 85-95 mm, curved 1/1
Tubing clamp Qty 06 Length 190-210 mm, tubing clamp with guard
Haywood Smith tissue grasping forceps Qty 01 Length 245-255 mm
Roberts artery forceps Qty 02 Over holt dissecting forceps, length 215-225 mm,
curved
Roberts artery forceps Qty 02 Over holt dissecting forceps, length 222-227 mm, 1/1
curved
Yankauer suction Qty 01 With special large central bore, 4.8 mm diaphragm, olive
length 7-9 mm, length 280-290 mm
De backey sucker Qty 02 With central bore 3 mm diameter with lateral slots, length
270-280 mm
Formby sucker Qty 01 Diameter 3.3 mm, length 205-215 mm
Wire twister Qty 04 Length 145-155 mm, 0.5 mm tip size
Schmieden Taylor Scissor Qty 02 Dura scissors, Schmieden taylor dura scissors, length
150-160 mm
Langenbeck retractor Qty 02 Length 210-220 mm, kocher langenbeck retractor, blade
size 41-11 mm
Self retaining retractor Qty 01 Adson Type, length 206-215 mm, 4 x 4 prongs, blunt tip
reusable
Henley retractor Qty 01 complete set as per specs Self retaining, retractor large with
central blade of 74 x 16 mm, 30 x 16 mm, 18 x 16 mm, lateral blades 27 x 22 mm, 52 x
22 mm, 77 x 22 mm
Self retaining retractor Qty 01 complete set as per specs Popliteal retractor complete
with 60 x 50 mm 02 blades & semi sharp 40 x 35 mm 02 blades
De backey spreader / rib retractor Qty 01 De backey spreader / rib retractor, retractor
blade size 50 x 80 mm 02 blades, blades size 80 x 60 mm 02 blades
Gerbode Sternal retractor Qty 01 Gerbode type, standard spread blades 8-12 cm wide
and 3-5 cm deep, blades designed to put pressure on sternum but not on over lying
tissue
IMA retractor Qty 01 Favulor adult IMA retractor
IMA retractor Qty 01 French type, IMA couetil hook retractor French pattern, IMA
retractor complete set with short and long claw 25-40 mm deep and 15-25 mm wide
blades
O’shaughnessy forceps Qty 02 Length 225-235 mm
Wikstroem dissecting forceps Qty 02 Length 22-210 mm
Probes Qty 01 complete set De backey vascular probes set 01-2.5 mm malleable
Nerve hook Qty 01 Magner type, length 148-155 mm
Nerve hook Qty 01 Crile type, length 195-210 mm
Derra atraumatic vascular clamp Qty (03) Length 165-175 mm, blade width with one
qty each of following
Qty 01 15-17 mm
Qty 01 18-22 mm
Qty 01 24-28 mm
Derra clamp Qty 01 Lambert Kay type, length 213-217 mm, depth width 40 mm, jaw
length 93 mm
Cross clamp Qty 01 Morris, atraumatic vascular clamp, length 170-180 mm, jaw length
93 mm, angeled
Sim Qty 01 De backey atraumatic vascular clamp, length 268-274 mm, jaw length 111
mm
Fine bulldog clamp Qty 03 Vascular bulldog clamp, length upto 45 mm, jaw serration
length upto 19 mm
Muller bulldog clamps Qty 03 Closing force less then 60 grams
Suture Puller Guide Only Qty 03 Fine suture puller guide, length 160-220 mm
IDL Mirror Qty 02 Length more then 300 mm
Vessel Tip IMA Cannula Qty 06 Minimum internal Fr 14
Micro needle holder Titanium material Qty 02 Puskas Jackobson micro needle holder
for suture size 7/0 & smaller, length 195-208 mm, tip 8 mm, diamond dust jaw with
lock
Micro needle holder Titanium material Qty 01 Jackobson micro needle holder for
suture size 7/0 & smaller, length 180-190 mm, with lock and rachet
Needle holder jack Qty 02 Jackobson heavy jaw needle size 2/0 and smaller with lock
and rachet, length 185-195 mm
Tenotomy scissor Qty 01 Stevenson tenotomy scissors, curved blades, length 175-185
mm
Safety pins for instruments holding Qty 03 Reusable, sterilizable and lockable
Instrument trays for fine instruments Qty 02 Extra large size, Reusable, sterilizable and
lockable
Tungsten Carbide Needle Driver Qty 01 Needle drive with tungsten carbide inserts,
carbide inserts, curved jaws, with lock, 5mm shaft, working length 14-17 cm,
instrument length 27-32 cm, round squeeze handle
Tungsten Carbide Needle Driver Qty 01 Needle drive with tungsten carbide inserts,
straight ryder jaw, with lock, 5 mm shaft, working length 14-17 cm, instrument length
27-32 cm, round squeeze handle
Tungsten carbide needle driver Qty 01 Needle driver with tungsten carbide inserts,
curved heavy jaws, with lock, 5 mm shaft, working length 22-28 cm, instrument length
32-38 cm, round squeeze handle
Tungsten carbide needle driver Qty 01 Needle driver with tungsten carbide inserts,
straight ryder jaws, with lock, 5 mm shaft, working length 22-28 cm, instrument length
32-38 cm, round squeeze handle
MICS Tungsten carbide ring handle needle holder Qty 01 Tungsten carbide quoted
jaws, ring handle, 5mm shaft, working length 15-17 cm, instrument length 28-32 cm,
straight tip, with lock
MICS Tungsten carbide Ring handle needle holder Qty 01 Tungsten carbide quoted
extra heavy jaws, curved, 10 mm shaft, working length 20-22 cm, instrument length
32-36 cm
MICS Forceps / Grasper Qty 01 Double action, Straight short jaw 0.1 mm, 5 mm shaft,
working length 17-19 cm, instrument length 28-32cm, round squeeze handle ,
MICS Debakey Forceps / Grasper Qty 01 Dual action, 3.2 mm jaw, working length 15-
18 cm, instrument length 28-32 cm,
MICS tungsten carbide Serrated forcep / grasper Qty 01 Double action, straight jaw,
2.8 mm jaw, 5 mm shaft, working length 22-28 cm, instrument length 32-38 cm, round
squeeze handle,
MICS Resano type forceps Qty 01 Straight jaw 2.8 mm, 5 mm shaft, with lock, working
length 23-27 cm, instrument length 32-37 cm, round squeeze handle,
MICS Debakey forcep / grasper Qty 01 Double action, straight jaw 1 x 2, 2.8mm, 5
mm shaft, with lock, working length 15-19 cm, instrument length 28-34 cm, round
squeeze handle,
Mics Scissor Qty 01 Strong curved blunt end, 5mm shaft, angled 15 degrees, working
length 16-19 cm, instrument length 28-32 cm, round squeeze handle,
Mics Scissor Qty 01 Strong curved blunt end, 5mm shaft, angled 70 degrees, working
length 22-27 cm, instrument length 32-37 cm, round squeeze handle,
Mics Scissors Qty 01 Strong curved blunt end, 5 mm shaft, angled 70 degrees, working
length 15-18 cm, instrument length 28-32 cm, round squeezed handle,
Mics Scissors Qty 01 Strong curved blunt end, 5 mm shaft, angled 30 degrees, working
length 22-27 cm, instrument length 32-38 cm, round squeeze handle ,
Mics Scissors Qty 01 Strong curved blunt end, 7 mm shaft, angled 30 degrees, working
length 15-18 cm, instrument length 28-32 cm, round squeeze handle ,
MICS Ring Handle Dissecting Scissors Qty 01 Curved with blunt micro tips, blade size 3
cm, 5 mm shaft, working length 18-20 cm, instrument length 28-32 cm, should have
sleeve
MICS Rongers forceps Qty 01 Angled 30 degrees down, 3 x 10 mm jaws, working
length 26-30 cm
MICS Russian forceps Qty 01 Angled 30 degrees curved left, dual action, 3 x 10 mm
jaw, working length 20-30 cm, instrument length 30-40 cm,
MICS Suture pusher Qty 02 Shaft size 05 mm, working length 21-25 cm, total length
30-35 cm
MICS Suture Puller Qty 01 Shaft size 1.5-2 mm, working length 24-26 cm, total length
34-36 cm
Chitwood DeBakey Clamp Qty 01 10 cm curved left, ring handel, 2 x 3 DeBakey jaws,
jaw length 100 mm, with lock & rachet, shaft 10 mm, working length 25-30 cm, total
length 35-37 cm
Chitwood DeBakey Clamp Qty 01 10 cm curved left, 1 x 2 DeBakey atraumatic jaws,
jaw length 65 mm, with lock & rachet, shaft 10 mm, working length 22-24 cm, total
length 30-34 cm
Watson Chayne Type Dissector Qty 01 3 mm, 4mm curved double ended dissector,
length 23-26 cm
MICS Clip Applicator Qty 01 Clip size small, working length 15-17 cm, instrument
length 25-28 cm
Nerve hook Qty 01 Length 30-35 cm, tip size 1mm without bead, hook size 5 mm,
shaft size 3.5-4.5mm, round handle
MICS Suction Nozzle Qty 01 SS, satin finish, curved, standard, tube diameter 4-6 mm,
40-50 cm, for MICS
MICS Suction Nozzle Qty 01 SS, satin finish, curved, standard, tube diameter 3-4 mm,
30-33 cm for MICS
Micro Blade Knife Handle Qty 01 MICS scalpel for micro blades, handel for micro
blade, length 12.5-15”, must correspond with micro blades freely available in the local
market (micro blades qty 200)
MICS reusable CVS Knife Qty 01 Reusable diamond blade, wedge type
Low profile rib retractor for MICS surgery Qty 01 Low profile intercostals retractor for
MICS valve surgery chest/rib spreader with bilateral arm movement and double swivel
blades and pivot of blades. Blades concave both or one convex or other concave in
small medium large and extra large sizes and in pairs complete with re-usable
sterilization box, tray and bacterial filters
Optional;
Coloured blades with in-built light complete with light source.
Left Atrium Retractor for MICS Qty 01 Cardiovations port access type retractor, with
all various blade sizes complete with AR-A foot pad,
LA retractor with chest pad and accessories for MICS
Double level sterilization tray Qty 01 Double level sterilization tray for minimum 24
MICS instruments complete with reusable bottom and top pin mats and allied
accessory if any
Reciprocating Sternum Saw Battery Operated Qty 02 Clinical Purpose
A sternal saw is a bone cutter used to perform median sternotomy,
opening the patient's chest by splitting the breastbone, or sternum.
TECHNICAL SPECIFICATIONS
Sternum Saw Specification
Features
o Modular Cardio-thoracic handpiece with reciprocating and oscillating attachments
o 4 sawing attachments - facilitating primary, revision and paediatric surgery in one
handpiece.
o 2 cannulated drilling attachments
- Blade guard must be steerable for a smoother cut.
o Wire driver attachment
o Spigot locates attachments in 90-degree rotational increments
o Electrical protection – Type CF
o Device temperature and current draw monitored to prevent excess heat generation
o Handpiece is of metal hard anodised aluminium and stainless steel construction
o Handpiece is of high performance, hermetically sealed hybrid motor controller type
o Handpiece and attachments should be fully machine washable
o Small and light weight handpiece
o Single trigger operation with progressive stepless control with safe mode selector
o Single optimum size micro adjustable (steerable) blade guard, positional for inferior
or superior approach
Simple twist and click blade guard fitment, with tool-less handpiece release ring
o Tool-less quick fit blade locking mechanism
o Unidirectional & bidirectional cutting accessories
o Half size basket type sterilisation container, with separate insert tray
o Lithium Ion sterilisable and Aseptic Lithium Ion battery technologies have 5-bar LED
battery capacity fuel gauge
-5 blades of each attachment type
Accessories:
Complete with all standard accessories
Continuous CO2 Insufflator Qty 01 Device able to continuously deliver co2 humidified
mist jet with the delivery rate of 03 liter / min to at least 20 liters / min
MICS endoscopic camera system Qty 01 Minimally Invasive Cardiac Surgery
Endoscope system with camera and all allied equipment and accessories
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
13. Negative and Positive 1 Total 04 units required;
Pressure Ventilation 01 unit for 5000 ft3 area
System Units (02 units 02 units each for 4000 ft3 area
each) 01 unit for 3600 ft3 area
(RAIC-1) (Imported units 2 for theaters and 2 for isolation rooms with provision of positive and negative
pressure)
(CIF BASIS)
Should have provision of;
Air asepticiser, 99.5% particle and biological decontamination
Positive pressure mode
Negative pressure mode
Automatic mode
Provision from shifting from positive to negative and from negative to positive
pressure mode immediately
Should be best fit for all environments keeping in view the sterilization and
decontamination
Touch screen control panel
High efficiency heating and cooling, minimum 8kW, temperature supply between 16 0 -
300 C
Humidity control, 30-90 % Rh (accuracy less then 2 % Rh)
Should have HEPA filters for particles more then 0.3 micron upto 99.99 % interception
and capacity higher then 2500 m3 / hr
In-built G4 EU4 and carbon filters.
Complete air sterilization unit with negative ion generator and should have ability to
form atmospheric plasma (pathogen ionisator)
Complete with touch screen, control sensor accuracy and differential pressure sensors
Low noise units, should be less than 60 Db
With stainless steel or anti-oxidant aluminum type air channels
Power supply should be as per local standards
All Units are to be supplied and installed by the supplier and all wear and tear
repair/replacement of the existing structure upto end users satisfaction shall be the
responsibility of the supplier.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
14. Portable Emergency 1 TECHNICAL SPECIFICATIONS
Light Single Dome Mobile LED emergency shadow less operation theater light.
(Mobile) Hermetically dust proof LED head.
Luminance at 1m distance 130,000 lux or above.
(RAIC-1) Color temperature 4000°-5000° degree kelvin or better.
Light field diameter between 15 – 30 cm or better (required lux should be available within max.
light field area).
(FOR BASIS)
Color rendering index 94 or more.
LED life 50,000 hours or more.
Temp. rise in surgical surface <2° C
220 V / 50 Hz 1 phase.
Built-in rechargeable battery backup for at least 2 hours.
Autoclaveable handles.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
15. Portable / Laptop type 1 TECHNICAL SPECIFICATIONS
Echocardiography A complete dedicated digital Echocardiography unit for wide range of premium performance
Machine Complete with application of cardiovascular imaging in pediatrics and adult. Mobile trolley mounted system
Trolley and sine wave with built in workstation / data management system for digital acquisition, storage and review
UPS of complete ultrasound studies including static and dynamic clips in DICOM format, read/write
zoom. Studies can be reviewed and output to CD / DVD/MOD. The machine must have sharp
and high quality image reproduction with heavy duty performance. It should have minimum
(RAIC-1)
following
specification :
(CIF BASIS) DISPLAY:
High resolution 1280x 1024 non interlaced, flicker free.
Display size Min. 19” LCD,TFT, tilt able and swiveable type.
OPERATING MODES:
B, 2D M-Mode, Power Doppler, HPRF, Spectral Doppler, Color Doppler, Velocity Mode, Pw,
Doppler, Duplex And Triplex Doppler, CW Doppler Steerable and ECG Gating,
CONTROL PANEL:
Alphanumeric keyboard with built-in trackball.
Direct access to system functions through dedicated keys.
Indicator lights identify activated keys.
Audio volume control with bidirectional / stereo speakers and foot switch
User selectable image magnification control.
Adjustable transmit focusing control.
Total and Lateral Gran Compensation controls (6 or more).
CALIPER / MEASUREMENTS :
6 to 8 calipers for measurement per screen trace length measurements for:
Distance, angle, distance depth from skin line, area, circumferences, compound / volume,
slope, time, heart rate and acceleration.
APPLICATION:
Cardiac, Peripheral, pediatric, adult cephalic and transesophageal with all required software for
measurements.
OPERATING MODES:
2D tissue, 2D angio flow, color M-Mode, tissue velocity M-mode, tissue strain imaging,
continuous wave Doppler, tissue m-mode, pulse wave Doppler, tissue velocity imaging, tissue
tracking, tissue synchronization, blood flow imaging, blood flow angio flow imaging.
DISPLAY MODES:
Live and stored display format: full size and split screen. Review image format: for still and cine,
simultaneous capability B+PW, B+ CFM/TVI+PW, CW, B+ or triplex mode, , B+ color split screen
display. Tissue Imaging, 2D mode, , M-mode, color Doppler imaging, color flow imaging, color
Doppler imaging, color angio, color m-mode, blood flow imaging, blood flow angio imaging,
tissue velocity imaging mode/CRT evaluation tool, tissue synchronization imaging mode, PW /
HPRF Doppler, CW Doppler, vascular calculations/IMT, cardiac measurements.
FRAME RATE:
(machine to be quoted with Maximum available frame rate)
Min. 200fps in B-Mode and 100fps in Doppler mode.
CINE MEMORY
Min. Cine Memory for 1000 frames or 250mb min.
IMAGE VIEWING DEPTH:
20 – 280 mm or more for cardiac application
IMAGING MODES / TECHNIQUES:
Tissue harmonic Imaging, Tissue Doppler Imaging, Color Angio, Tissue Velocity Imaging
Tissue Imaging (Display real time Doppler shift information from moving tissue to better
visualize and quantity myocardial function).
Strain Imaging tools: Doppler(Doppler based as well as speckle tracking base)
Quantitative strain rate imaging; An advanced quantitative technique of Tissue
Doppler Velocity. Strain rate is a measure of the contractile motion of myocardium.
The software should have the capability to show contrast agent only, tissue only or contrast
and tissue displays.
Vascular imaging software for carotids/IMT measurement.
STRESS ECHO :
Integrated multi stage stress echo system for advance and flexible stress echo Acquisition and
measurement for LV B-Mode imaging.
Quantitative analysis for contrast during stress. examinations
Used with TDI protocols.
STORAGE DEVICE
Built-in CD / DVD Drive WITH 10 DISKETTES.
SYSTEM DYNAMIC RANGE
Dynamic range minimum 160 dB or more
COMMUNICATION SOFTWARE
System should conform to DICOM 3 communication software for:
Image Storage, print, Query / Retrieve, Network Communication.
Probes:
Should be light weight, capable of multiple centre frequencies on transmit for 2D, color Doppler
PW/CW (Steerable) Imaging and to perform Harmonics.
PORTS:
Video Output
USB / RS 232
Networking
220-240VAC 50 Hz
Accessories:
STANDARD TRANSDUCERS:
Linear Probe multi frequency to cover frequency of 6.0-8.0 MHz.
Multi frequency Phased array sector probe to cover 2.0/2.5 – 4.0MHz.
Multi frequency Phased array sector probe to cover 5.0 – 8.0MHz.
CW Pencil Probe
Online UPS for 30 min. backup time for complete unit including
Printer.(Emerson,Liebert,Chloride,MGE & Riello)
Digital B/W Thermal Printer with 50 rolls of papers.
Jelly 20 L in bottles.
Optional:
Digital Color Thermal Printer with 10 Packs of 100.
Multiplan TEE Transducer (3 – 6 MHz) for adults.
Multiplane TEE Transducer (4 – 6 MHz) for peads
Warranty 03 Years
Country of Origin USA / EUROPE / JAPAN.
16. Semi-Automatic 4+8 Motorized semiautomatic Hospital bed suitable for use in Intensive Care Unit
Electrical Beds with Bed Intensive Care bed with removable head and foot panels made of HDPE (High Density
side Cabinet, Over Bed Polyethylene)
Table, Mattress Splitted side rails made in HDPE (High Density Polyethylene)
External dimensions of Bed Minimum 21 75 x 990 mm
( RAIC-12) Safe working load minimum 250 KG
Height adjustment 400 to 800mm with control of hand held, Bilateral foot and nurse
(CIF BASIS)
control panel
Trendelenburg / anti Trendelenburg position +17º/ -17º with Automatic release by
pressing a single button up to maximum Trendelenburg position
Back raise Position angle 68º
Leg rest position angle 30º
Foot rest Position angle 25º
X-ray cassette holder with translucent HPL back-rest section To facilitate use of the C
arm / x-ray
ABS twin casters Ø150mm with protection fenders
4 sectional Modular mattress platform boards made in PPC easily removable
Pedals operated central locking system
Battery Back-up with alarm system
Auto CPR and Manual CPR both positions obtain by pressing a single button
Cardiac CHAIR position with Automatic release by pressing a single button
Angles/Level gauges to Obtain exact positions
The foot end must has a retractable rack for linen storage
MATTRESS
Mattress should made in a polyurethane foam body sectioned laterally with minimum density
of 25 Kg/m3. The design of mattress allows the surface articulations to maximize the patient
comfort. It must have a standard water proof & Fire retardant cover with anti-allergic
treatment that prevents the microorganisms spread.
BED SIDE CABINET
Made of Highly robust epoxy coated finish metallic body with steel sheets and minimum height
of 620mm. Interior shelf and ventilated bottom removable for sanitary disinfection. Bilateral
opening drawer & doors. Meal tray with protective edge, height adjustable with 360º swivel
facility. ABS shielded Ø75 mm twin casters with protective Bumpers and must have lock
capability
OVER BED TABLE
Made of epoxy coated finish steel structure with height adjustable facility. Top decorative
board thickness minimum 16mm. Lateral tilting for reading. Rolling base with 4 twin castors
minimum Ø50mm with lock capability.
ACCESSORIES
I.V. Rod. Stainless steel column. Height adjustable rod with 4 hooks.
Oxygen cylinder holder with headend/footend Fittings made of Stainless steel.
Urine bag hooks Bilateral on bed metal frame.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
17. Portable Stand type BP 2+ Best quality, Rate Required on F.O.R Basis. Subject to sample approval
Apparatus (02),
Portable I/V Stand 8+ Warranty: 01 years
(08), Country of Origin Local / Imported
Oxygen Cylinder
2
Complete with Mobile
Stand and Gauge (02)
(FOR BASIS)
18. Hydraulic Cardiac 2 TROLLEY FOR PATIENT TRANSPORT / PATIENT SHIFTING TROLLEY
Stretchers Imported 2-3 sections Patient Shifting Trolley.
Complete with 02 Back section should be adjustable from 0 – 70 Degree Approx.
Cylinder and Gauges Should have Trendelenburg / Revere Trendelenburg positions 15/-15 degree approx.
Oxygen Bottle Holder
(RAIC-2) Wire basket
4 Bumper at all corner to protect trolley
(FOR BASIS) Patient Safe Working Load capacity min 150 kg or more.
Accessories:
IV rod.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
19. Suction Machine 1 HEAVY DUTY SUCTION MACHINE
Heavy Duty Reciprocating, oil free pump mechanism.
Heavy duty Mobile Suction Unit with twin jars (Polysulfone / Polycarbonate type) of
(RAIC-01) capacity up to 4 or 5 liter each, Autoclaveable.
Aspiration rate up to 40-50 liters/minutes or more at 650-900mm.Hg
(CIF BASIS) Vacuum continuously adjustable
Triple flow safety device
Change over valve
Suction tubing of silicone with coupling connection for each jar
Noise Level 45 dB or less.
220V/50Hz.
Accessories:
10 x bacterial filter
Original trolley with lockable wheels.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
20. Surgical Loops One 3 Binocular magnifying loupes
Each with Magnification
of 2.5, 3.5, 4.5 Clinical Purpose
Use in fine surgery especially surgery on vessels, nerves and tendons
(RAIC-3) Required for cardiovascular procedures
TECHNICAL SPECIFICATIONS
(CIF BASIS)
Magnification: 2.5 X
Working Distance: 400 to 550 mm.
Field of View: 90 to 180 mm
Depth of field: 160 to 260 mm
Magnification: 3.5 X
Field of View: 95-110 cm2
Field Diameter: 11-12 x 8.5-9.5 cm
Each Unit supplied with:
This loop (3.5 X) should be customized according to end users refraction and IPD
Led mini loup light with illumination of 55000 LUX of HDi illumination at 10 inchs or better,
colour temperature 5500 kelvin or more, led operating time 10 hours or better with
appropriate spot size, complete with battery and charger
Supplied with;
∙ Storage case
∙ Magnification loupes mounted in refraction glasses and frame
∙ Protective shield
∙ Cleaning cloths
∙ Head straps
∙ User Manuals
Magnification: 4.5 X
Field of View: 63 to 67 cm2
Field Diameter: 8.5-9.5 x 6.5-7.5 cm
This loop (4.5 X) should be customized according to end users refraction and IPD
Led mini loup light with illumination of 55000 LUX of HDi illumination at 10 inchs or better,
colour temperature 5500 kelvin or more, led operating time 10 hours or better with
appropriate spot size, complete with battery and charger
Supplied with;
∙ Storage case
∙ Magnification loupes mounted in refraction glasses and frame
∙ Protective shield
∙ Cleaning cloths
∙ Head straps
∙ User Manuals
Optional;
Micro HDi camera with microphone mountable on 3.5 X and 4.5 X loops
1080p high definition with 30 or more fps rate and 24 bit high definition colours
Operating system windows 7 or advance
Approved for use in operating rooms from relevant foreign safety standard bodies
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
21. Syringe Pumps 16 TECHNICAL SPECIFICATIONS
Syringe pump for fluid administration.
(RAIC-16) Flow Rates: 0.1 - 400 ml/hr. (Approx)
Digital display of set parameters.
(CIF BASIS) Universal Syringe acceptance capability for disposable, Plastic, Size, 10, 20, 50, 60 ml.
Drive Accuracy. ±3%
Display of drug name, Infusion rate, infused volume and volume to be infused.
Automatic adaptation of controls according to syringe /infusion set.
Quick freed/rapid infusion facility.
Rechargeable battery and mains operated 220V, 50Hz.
Safety alarm audible and acoustic for occlusion end of infusion, low battery.
Battery back up 3 to 4Hours.
Should be compatible with docking station.
ACCESSORIES:
OPTIONAL :
TCI / Equivalent Technique
Docking station of two/four/six/eight or more.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
22. Temporary Pace Maker 3+1 Temporary Pace Maker (Single Chamber)
(Single Chamber 03
Dual Chamber 01) TECHNICAL SPECIFICATIONS
Temporary pacemaker for cardiac pacing
(RAIC-3+1) OPERATING FEATURES and CHARACTERIST
Asynchronous and demand mode operation
Sensing: light indication
(FOR BASIS)
Pacing: light indication
Calibrated rate, output and sensitivity control
Defibrillator protected
PARAMETERS:
Stimulation control of current output upto 2
Pulsing rate control adjustment upto 150 pp
Sensitivity control upto 8mV
Pulse width 1.5 m sec
Asynchronous and demand mode switch
INDICATORS:
Battery status light indication
OTHER FEATURES:
Portable
Accessories including case and cables
OPERATING REQUIREMENTS:
Standard alkaline battery operation
Backup operation during battery change.
Accessories:
Complete with standard accessories
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
TECHNICAL SPECIFICATIONS
Dual chamber multi-mode temporary 'pacemaker for cardiac Pacing
OPERATING FEATURES and CHARACTERISTICS:
LCD display of all pacing, sensing and warning indicators
PARAMETERS:
Multi-mode: all combinations of atrial,ventricular&dual;AA,VV,DD,A0,VO,DO,DV
Adjustable pacing rate adjustment upto 150 ppm
Adjustable pacing voltage upto 10V
Sensitivity control upto 8mV
Pulse width upto 1.5 m sec
OTHER FEATURES:
Portable
Accessories including case and cables
OPERATING REQUIREMENTS:
Standard alkaline battery operation
Accessories:
Complete with standard accessories.
Optional:
Qty of Reusable sensors/leads
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
23. Vacuum Assisted 1 Vacuum Assisted Venous Drainage On Line Blood System
Venous Drainage on line
Blood System Clinical Purpose
VAVD controller allows accurate regulation of vacuum applied to sealed blood reservoir for
(RAIC-1) minimally invasive cardiovascular procedures with small incision, particularly in pediatric
cardiac surgery and adult surgery.
TECHNICAL SPECIFICATIONS
(FOR BASIS)
Mechanical regulator to allow Vacuum through sealed venous reservoir during Cardiovascular
procedures.
Both Pressure reliefs (Negative and positive) into the Vacuum controller.
Sterile tubing set with moisture trap ( Qty: 20)
The sterile tubing set with moisture trap provides correct, easy and safe connection between
the controller and the reservoir and is recommended to be used with the controller.
Accessories:
Complete with all standard accessories
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
24. Video Laryngoscope 3+1 TECHNICAL SPECIFICATIONS
(Glide Scope) 3.5 inches full view LCD high-definition display; screen can rotate around 90 degrees
backlight LED; screen resolution 640*480.
(RAIC-3+1) 2 million high-definition anti fog camera, FOV 66 degrees, no dead angle. Illuminance
800 LUX.
(FOR BASIS) Handle for ergonomic design, feel comfortable, antibacterial, light.
The battery is a high quality lithium-ion rechargeable battery, full of electricity,
Sustainable work for more than 200 minutes, battery life 3-4 years, Charging time is 8
hours.
A key quick camera; Continuous camera; data can be output storage; can be
connected to the display.
The lenses for high-definition polymers, medical PC material
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
25. Air Mattress 4 Warranty: 01 years
Country of Origin Local / Imported
(SSTH-4)
(FOR BASIS)
26. ANAESTHESIA 6 TECHNICAL SPECIFICATION
MACHINE with Anesthesia machine to administer anesthetic agents in precise control and flow
ventilator manner for adult, pediatric and neonates.
The machine will equip to monitor the vital sign parameters and anesthetic agents
during operation.
(SSTH-4, SSHD-2)
Mobile 3-gases O2/N2O/AIR.
It must comprise of the following components:
(CIF BASIS)
Non-interchangeable pipeline inlets
Pipeline & cylinder gauges for O2, N2O and AIR
Central gas/ electronically driven unit
Pin index cylinder yokes for Oxygen & N2O (One each), as backup.
Pin index type Cylinders will be provided (2xO2 and 2xN2O: BS standard)
Gas outlet and O2 flush control
1 auxiliary O2 outlet
Two Lockable castors
Stainless steel/fiber work surface
Absorber bag support arm
Three gas digital flow meters for precise control and monitoring of gases and virtual
tube display.
Drawer unit 4- 6'' high
Scavenging system Passive / Active type
N2O Cut off
Minimum pre set flow of oxygen
ANESTHESIA VENTILATOR:
Anesthesia Ventilator with minimum 10” or more color LCD/TFT screen.
The ventilator shall be capable of ventilating adult and pediatric patients.
The ventilator shall have following features as a minimum requirement:
Volume Preset Time Cycled Ventilator (IPPV Mode)
Pressure Controlled and pressure support Modes
Breathing Mode Selection (Standby / Volume / Spontaneous and Pressure)
Built in Oxygen Monitor
Inverse I:E ratio Capability
Gas Specific Input Connectors (Air or Oxygen ISO or ANSI Standards)
Tidal Volume from (20ml to 1400ml)
Rate or Frequency 4 to 60 bpm
PEEP (4 to 20 cm H2O)
Inspiratory Pressure Limit
Power Supply 220 VAC, 50 Hz
Battery Backup (60 Minutes or more)
Low / High FiO2 Alarm
Incorrect Rate or Ratio alarm
Mains Failure alarm
Low battery alarm
Hypoxic device guard.
Pressure and Volume (Spirometery) Loops / curves.
High / Low pressure alarm.
The ventilator shall be supplied with complete drive hose and power cable.
Note: Annual maintenance kits (needs to replace annually) will be included in the warranty
period as per manufacturer’s guidelines.
MONITORING:
Vital sign monitor.
Size of minimum 15” Touch Screen or more for display of vital sign parameters
Measurement of ECG 5 leads.
NIBP with re-usable single hose cuff for children and adults
SpO2 with re-usable cable and sensors for children and adults size (Massimo Type/
Equivalent motion tolerance technology).
HR
Temperature with nasal probe.
Respiration
etCO2 (main or side stream).
Dual Channel IBP
220V, 50 Hz operated.
Note: Vial sign Monitor must be supplied by the same manufacture and must be Compatible
with the machine and Ventilator.
The warranty of equipment will be including batteries, oxygen sensor and flow sensor.
Anesthesia Accessories
Power outlet with 3/4 socket outlets to connect the auxiliary equipment.
CO2 absorber 800 – 1,500 gm or better complete with valve for bag/ventilator
Manometer
Breathing bags
Re-usable Silicon Autoclave able breathing circuit (Adult, Peads, Infant 01 each)
Mounts and Y-piece.
Additional breathing hose and connector with 03adult& 03pediatricbellows.
Monitor Accessories:
2 NIBP Cuff each
2 Spo2 probe
2 nasal temperature probe
2 ECG Leads
IBP Leads
Vaporizers:
Two pre calibrated Vaporizers of Isoflurane & Sevoflurane vaporizer, temperature and
flow compensated.
Anesthetic Agent monitoring (With monitor or within the Anesthesia Machine)
Optional:
Heart Lung / Cardiac By Pass/ Spontaneous Mode
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
27. Apheresis Machine 1 CONTINUOUS FLOW APHRESIS SYSTEM
(Cell Separator) Detailed Requirement:
Aphresis system for cell therapy, therapeutic aphresis, stem cells and transfusion
(SSTH-1) medicine
Microprocessor controlled
(CIF BASIS) Both for adults and peads applications
Continuous flow centrifuge system with low extracorporeal volume
Dual & single needle platelet collection system
Dual & single needle therapeutic plasma exchange system
Red blood cell exchange capability
White blood cell collection and depletion, lymphoplasma exchange
Automatic regulation of platelets and plasma volume
RS 232/USB port for data output
220V 50 Hz, AC
User Adjustable Settings:
programmable
Control of infusion rate of anti-coagulant
Control of patient fluid balance, volume of replacement and remove RBC volume,
patient HCT
Control procedure run time
Selectable adjustable reference range for all parameters
Safety for automatic centrifuge shut down between any pause
Platelet concentration monitor
Displayed Parameters:
Monitoring of infusion rate of anti-coagulant
Digital display of patient fluid balance, volume of replacement and remove RBC
volume,
patient HCT
Digital display of procedure run time
Alarm for low donor platelet
Accessories:
Complete with standard and operation accessories
Imported Compatible Sine wave UPS for back up of up to 30 minutes (Emerson,Liebert,
Chloride, MGE, APC or Equivalent)
Operating Manual with a Soft Copy
Service Manual with a Soft Copy
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
28. Auto Refracto Meter 1 AUTO REFRACTOMETER WITH KERATOMETER
with IOL Master With auto measurement & printout with standard accessories.
Manual or motorized chin rest movement.
(SSTH-1) Measuring range:
Spherical: ±17D or better.
(CIF BASIS) Cylinder: ±6 D or better.
Axis: 1 to 180o.
Pupil distance: Max 85mm (increment 1mm).
Display: digital on TV or LCD monitor with printer.
Electric power: 220-240V AC, 50Hz.
ACCESSORIES:
With 6 paper roll, dust cover and cleaning kit.
On locally made motorized table.
Imported Compatible Sine wave UPS for back up of up to 30 minutes (Emerson,Liebert,
Chloride, MGE, APC or Equivalent)
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
29. Autoclave Machine 1 TECHNICAL SPECIFICATIONS
Detailed Requirement:
(SSTH-1) System should be fully automatic microprocessor controlled horizontal steam sterilizer high
speed pre & post vacuum treatment
(FOR BASIS) The door system should be automatic with locking device.
The system should be based on a screw and a self-aligning nut
The sterilizer’s framework, piping and housing should be made up of stainless steel quality
Sterilizer should be equipped with a diaphragm vacuum pump, combined with a heat
exchanger, and should be a pre-vacuum and post vacuum sterilizer
The sterilizers should be equipped with 2 Water Reservoirs one for the tap water and one for
drain water
The Sterilizers should be equipped with an Energy Saving Mode which should be activated
when the unit is not in use for a certain period of time
User Adjustable Settings:
Capacity: 20-25 litter or more
Built-in steam generator
Programmable Temperature range of 121 and 137 Degree Centigrade
Pressure up to 2.3 bars (34 psi)
Displayed Parameters:
The system should have a 5” or more digital touch-screen graphic display , communication,
self and remote diagnosis and PC connection for external documentation and printing
The sterilizer should show’s real time graph of cycles while it’s running
The Sterilizer should be equipped with 5 Pre-programmed cycle and 2 test cycles
Memory for at least last 10 cycles
Accessories:
Complete with standard accessories;
The unit should be supplied with an integrated impact printer
A disposable air filter (HEPA) should be provided for filtering the atmospheric air
before entering in the chamber
Removable shelves of SS or equivalent
Operating Manual with a Soft Copy
Service Manual with a Soft Copy
Imported Compatible Sine wave UPS for back up of up to 30 minutes for software
(Emerson,Liebert, Chloride, MGE, APC or Equivalent)
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
30. Automated Chemistry 1 HIGH END FULLY AUTOMATIC RANDOM ACCESS CHEMISTRY ANALYZER
Analyzer Detailed Requirements:
Microprocessor controlled fully automated chemistry analyzer
(SSTH-1) User programmable with built in bar code reader
Sample type: Serum, Plasma, Body Fluids etc.
(CIF BASIS) Capability to re-run with automatic on board sample dilution
Automatic Sample Quality Analysis for Lipemia, Hemolysis, Icterus
CD/USB Storage System
RS 232 interface for on line computer
220V, 50 Hz operated
User Adjustable Settings:
Minimum 40 tests on panel including ISE
Minimum 60 sample/QC positions and continuous loading of samples
500 tests/hr or above for a range of chemistries (Other than ISE i.e. Na+, K+, Cl–)
Spectral Range 320-690 nm
Diffraction grating wavelength 340, 405, 492, 505, 546, 578, 630 nm or more / Filter
Wavelength 340, 405, 492, 505, 546, 578, 630 nm, one free position
Sample volume 2-50 μl
Displayed Parameters:
Touch Screen Display Monitor
On board reagent refrigeration of 2-8 Degree Centigrade / On board reagent
refrigeration compatible with the kits.
Facility to display actual temperature of reagent
Temperature control for assays at 37C
Self-calibrating against known standards + Storage of QC results
Independent stat capability, facility of reflex testing
Automatic calibration of curves and results
Automatic flagging of results outside user defined limits
Data entry by keyboard, bar code reader & LIS
Bubble and sample level detector/Liquid Level Sensing on both Reagent and Sample
Probe
Minimum data storage 10,000 tests
Parameters to be decided by the procuring agency as per requirements of end user
Accessories:
With Built-in Thermal Printer or External Laser Printer
Compatible Imported Online Sine wave UPS with Battery backup for 30 minutes
(Emerson, Liebert, Chloride, MGE, APC or Equivalent)
Compatible RO System (If required) to operate the Chemistry Analyzer
Operating Manual with a Soft Copy
Service Manual with a Soft Copy
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
31. Automated tissue 1 TECHNICAL SPECIFICATIONS
processor Detailed Requirements:
Tissue Processor for use in histopathology
(SSTH-1) Bench top unit, moveable on rollers
One basket operation/ standard tissue basket without vacuum/without fume control
Carousel-type construction with 12 processing stations: 10 reagent stations, 2 wax baths.
(CIF BASIS)
Connection for optional third wax bath. Glass beakers / White Polyacetal, solvent resistant and
dishwasher proof, with beaker carriers and minimum/maximum filling marks.
Aluminum standard tissue basket.
Locking key /password protection to prevent inadvertent changing of programmed parameters.
Appropriate drain time between stations for reduced carry-over.
Automatic heating of wax before basket transfer to a wax bath.
Crank for manual raising and rotation of carousel-for immediate tissue basket removal or
transfer to the next stations.
Automated in-process reagent rotation
Exhaust system with active carbon filters with transparent fume hood
100-240V, 50/60Hz
User Adjustable Settings:
Cassette capacity: up to 300 cassettes Storage temp of reagents should be ambient to 35deg C
Reagent temperature in processing chamber from Ambient to 55 deg C
Paraffin processed in chamber at a temperature of 60 deg C to 75 deg C
Paraffin melt time from pellets should be 4-5 hours
Battery back-up with up to four hours operation
Displayed Parameters:
Indication of station and program parameters such as number of tissue baskets, remaining
infiltration time, real time, start time (delayed start time), Overall run time and end of runtime.
Audible alarms, error messages and warning codes
Manual and automatic mode of operation.
Varity of freely selectable programs, Individually programmable for each station.
It should have a touch screen interface for easy check of status
Reaction chamber viewing window for visual verification of samples
At least Eight customized programs and eight flush options
Suitable for xylene-free processing
Access code protection to secure settings from unauthorized access
Accessories:
Up to 12 glass beakers (2 Liters)
Up to 12 beaker carrier
Up to 12 replacement glass beakers
2 wax baths, 1.8 Liters
Up to 2 standard tissue basket
1 set of replacement fuses 2 x T 10.0 A
1 set of Power cords
Compatible Imported Online Sine wave UPS with Battery backup for 30 minutes
(Emerson, Liebert, Chloride, MGE, APC or Equivalent)
Operating Manual with a soft copy
Service manual with a soft copy
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
32. Automatic Tissue 1 EMBEDDING STATION
Embedding System TECHNICAL SPECIFICATIONS
Detailed Requirement:
(SSTH-1) Hot station
An instrument used to melt paraffin to embed on tissue cassette.
(CIF BASIS) Paraffin tank holding 3 liters of paraffin
Activation of paraffin flow manually via a rotating, height-adjustable clip.
Paraffin flow controllable, 2 pre-heated removable paraffin trays.
Ample easily clean heated space with politer spot for super mega cassettes.
Removable heated forceps holder for up to 6 forceps
Extra better illumination with adjustable lamp.
RS-232/USB Interface
Power Supply: 220V, 50Hz
User Adjustable Settings:
Optimum temperature choice: 55 C to 75 C
Paraffin: 3 liters
Paraffin trays: 1.5 liters
Cassette warmer: 100 cassettes
Displayed Parameters:
Program
Temperature: Paraffin tank, steel moulds section, Operating area
Temperature choice: 55 C to 75 C
Time: Days, Starting-Ending Time, Present etc.
Constant temperature indication
Programmable start and end times
Accessories:
Complete with standard and operation accessories;
Paraffin reservoir lid
Filtering screen
Paraffin collecting trays
2 Removable cassette and mold baths
02 removable lid for cassette and base molds
Removable holder for 6 forceps
Paraffin scraper
Illumination stand
Replacement Bulb
Set of fuses
Set of power cords
Imported Compatible Sine wave UPS for back up of up to 30 minutes (Emerson,
Liebert, Chloride, MGE, APC or Equivalent)
Operating Manual with a Soft Copy
Service Manual with a Soft Copy
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
33. Automatic Tissue 1 AUTOMATIC SLIDE STAINER?
Steiner Detailed Requirements:
Fully Automated IHC & ISH Steiner Analyzer
(SSTH-1) Convertible Technology
Parallel Automation
(CIF BASIS) Continuous processing
High throughput and rapid turnaround
Designed for single load, double load and continuous throughput
Bench top unit features user-specified water stations to match your routines
Operating voltage 220V, 50 Hz
User Adjustable Settings:
Slide capacity 30-60 finished trays (10 sliding tray may be replaced continuously)
Reagent container capacity: 7 ml - 30 ml
Number of reagent containers: 24-36
Bulk reagent container capacity: 2 - 10 l
Hazardous waste container capacity: 2 to 10 l
External bulk waste container capacity: 2-10 l
Turntable rotates for convenient access to stations at the rear of the unit
Turntable Diameter : 34" (86 cm)
Accessories:
Compatible Imported Online Sine wave UPS with Battery backup for 2 hours minutes
(Emerson, Liebert, Chloride, MGE, APC or Equivalent)
Vertical Slide Carrier (60 position) -2 supplied
Staining Trough -25.3 ft. oz. (750ml) -24 supplied
Water Wash Trough - 4 supplied
Water Inlet and Outlet Hose - 9.8 ft (3m) long fitted
Operating Manual with a soft copy
Service manual with a soft copy
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
34. B. Scan 1 Digital Memory and image freezing.
LCD /TFT monitor alphanumeric or analog display of overall gain.
(SSTH-1) Near field and dynamic setting.
Depth of examination 40mm & 60mm.
(CIF BASIS) In B mode scanning angle 40o or more.
10 MHz or better B Probe.
Gray scale 256 or better.
ACCESSORIES:
With compatible laser printer.
Imported Compatible Sine wave UPS for back up of up to 30 minutes (Emerson,Liebert,
Chloride, MGE, APC or Equivalent)
Warranty: 03 years
Country of Origin USA, EUROPE & JAPAN.
35. Baby Suction Machine 2 LIGHT DUTY SUCTION MACHINE?
Reciprocating, oil free pump mechanism.
(SSTH-2) Heavy duty Mobile Suction Unit with twin jars (Polysulfone / Polycarbonate) of
capacity up to 2 or 3 liter each, Autoclave able.
(FOR BASIS) Aspiration rate up to 20-30 liters/minutes or more at 650-900mm.Hg
Vacuum continuously adjustable
Triple flow safety device
Change over valve
Suction tubing of silicone with coupling connection for each jar
Noise Level 45 dB or less.
220V/50Hz.
Accessories:
10 x bacterial filter
Original trolley with lockable wheels.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
36. Baby Warmer 4 Baby warming system.
Microprocessor controlled heating system.
(SSTH-4) Mobile with antistatic castor, lockable, bumper guard.
Manual heat output control : 0% to 100%
(CIF BASIS) Skin and Manual temp control settings.
Display range of temperature: LED / LCD
Heating power/ source : 500 W Quartz/Ceramic
Selection for operating modes: Skin or Manual
Pivot arm technology for heating. Head can be moved in both directions allowing X Ray
procedure without moving the baby.
Integrated observation lamp
Integrated baby bed 700 x 450 mm approx. with secured plexi glass side panels,
foldable down, with grid for X-ray.
Manual bed inclination.
Audio and visual alarms for Power failure, Skin Temperature deviations, High
Temperature, Skin probe defective/ unplugged.
Lockable antistatic castors
Accessories :
IV pole,
Skin probe (reusable)
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
37. Beds (Manual) 20 Full Fowler Bed
03 Folders with side Size 78.5 x 36.5 x 24 (Square Pipe Gauge 18 )
cabinet, over bed table Mattress top having full fowler adjustment with the help of screw cranks,
Raxine medical grade 4-section lying area, full gatch adjustment with 2 screw cranks,
mattress and attendant vascular position adjustable by ratchet
bench (Complete set) Mobile on 4 quality castors dia. 125mm (2 diagonal lockable), recess legs of head &
foot penal.
(SSTH-20) 3 sections of adjustable lying area made of wire mesh ( 5mm with 3” x 1” Box)
Fixed portion made from reinforced MS sheet.
(FOR BASIS) Removal booze S/S pipe 1” sqr. with heavy gauge, Fixed with wooden panel
Bed corner welded 1.5” sqr. pipe with PVC +sqr. bush for head and foot panel
Urine bag holder
Fitting for IV pole
Chemically and phosphoric treated
Paint( high quality powder coated)
Drip stand fixed with bed via detachable bracket
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
38. Cardiac Defibrillator 3 Biphasic transthoracic (external) defibrillator with LCD colour display
With Internal and Synchronized output with ECG.
External Pacing pads Energy selection & delivery on control panel and paddles for external defibrillation.
Energy selection and delivery on control panel for internal defibrillation.
(SSTH-1,SSHD-2) Charging Indicator
The energy range should be adjustable for peads and adults up to 200Joules.
(CIF BASIS) Charging Time for full energy should be less than 05 sec
Screen Size of approx. 5 inch colored.
Display of HR, ECG through paddles and Lead I.II & III patient cable.
Built in recorder for printing of full summery on standard 50mm paper.
Alarms for High and low Heart rate, low battery warning.
Built-in Rechargeable battery with charger for minimum 50 shocks at max energy.
Auto tester/self-check.
External Paddles (Adult, Pead, Neonate)
AED facility with cable.
Pacing facility
AC 220V / 50Hz operated.
Accessories:
Complete with standard accessories, including reusable type Adult, Paediatric &
Neonatal sensors
Original trolley/cart Imported
Qty of Reusable sensors
Internal Paddle(Adult, Pead, Neonate)
Charging Time for full energy should be less than 07 sec
ETCo2
Spo2
Disposable pacing pads
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
39. Cardiac Monitor 40 TECHNICAL SPECIFICATIONS
Noninvasive with Bedside monitor for Adult, Peads.
OPERATING FEATURES AND CHARACTERISTICS:
Central Monitoring Non fade Touch screen TFT color display
System Electro-surgical interference suppression/protection
Defibrillator protection
(SSTH-28, Freeze and cascade facility
SSHD-10,SKP-2) Waveform traces speed; 25/50mm/sec.
Screen size: min. 15” TFT/LCD Touch Screen color display.
(CIF BASIS) Capacity to interface with LAN/WLAN for data transfer
ECG:
Numeric: heart rate.
Waveform: Six Wave forms minimum, real time and freeze ECG trace
NON-INVASIVE BLOOD PRESSURE(NIBP):
Method: Oscillometric principle
Numeric: systolic, diastolic and mean pressure
Selectable auto inflate interval settings
Rising cuff continuous pressure display
Reusable cuff
TEMPERATURE:
Numeric: temperature selectable in °C/°F.
PULSE OXIMETRY:
Numeric: 0-100% oxygen saturation measuring range.
Waveform-Plethysmograph pulse.
Reusable sensor electrode.
ARRHYTHMIA ANALYSIS:
Arrhythmia analysis and St. analysis
RESPIRATION:
Breathe rate display and apnea alarms.
Sweep speed; 6.25, 12.5 mm/sec.
OTHER FEATURES:
Trend data; graphical and tabular
ALARMS:
High & low (settable) on all parameters
Visual and audible indication of alarms OPERATING REQUIREMENTS:
AC 220V/50HZ
Built-in rechargeable battery for at least 1 - 2 hour AC power failure at full parameter.
NOTE: The system must be complete with all sensors, probes, cables or any other accessories
required for measuring all the above selected parameters for Adults and Peads.
ACCESSORIES:
OPTIONAL:
IBP two Channel/Four Channel.
Capnography (EtCO2)
Cardiac output.
Single / Dual Channel Printer
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
40. Cardiac Monitors 17 High End Invasive Patient Monitor
Invasive with central Patient monitor for display of vital sign monitoring of Adult, Neonate and Peads.
monitoring The Monitor have plug in modules / pods for measurement, recording and display of
different Vital Signs.
(SSTH-16, Mounted on Wall.
SKP-1) The monitoring solution shall make available all the directly connected monitoring
parameters accessible at the bedside during transport.
(CIF BASIS) The monitoring solution shall be capable of displaying a minimum of ten waveform
channels, and can expand up to 16 channels when required.
Monitors can be connected with Central station wirelessly / wired
OPERATING FEATURES AND CHARACTERISTICS:
Non-fade TFT Touch color display.
Electro-surgical interference suppression/protection.
Defibrillator protection.
Freeze and cascade facility.
Waveform traces speed; 25 / 50mm/sec.
The monitoring solution should be a minimum display size of 17 inches wide Touch
screen.
Provision of Communication port for sharing and transfer of data.
PARAMETERS:
ECG:
Real time and freeze ECG trace.
Measuring Range : 15 to 300 bpm
NON-INVASIVE BLOOD PRESSURE (NIBP):
Method: Oscillometric principle.
Numeric: systolic, diastolic and mean pressure
Modes of operation: Manual, Interval, Continuous, Venous stasis.
Rising cuff/continuous pressure display.
TEMPERATURE
Numeric: temperature selectable in °C and °F.
Measuring Range: 0 to 50 °C (equal to °F).
PULSE OXIMETERY
Numeric: 1-100% oxygen saturation measuring range.
Measuring Method: Absorption.
Display Parameters: Saturation, Pulse Rate and Perfusion rate.
Massimo Technology / other patient technology with motion tolerance.
ARRHYTHMIA ANALYSIS:
Arrhythmia analysis and ST analysis.
More than 13 types of arrhythmia should be detected.
RESPIRATION:
2 sensing leads.
Measuring Range: 0 to 150 bpm.
Breathe rate display and apnea alarms.
CAPNOGRAPHY:
Measuring Parameters: End-tidal CO2, Inspired CO2 and RRC.
CO2 measuring Range: 0 to 100 mmHg.
Unit selection: %, mmHg, KPa.
Measuring Range: -40 to 400 mmHg
IBP
4 channel IBP
OTHER FEATURES:
Up to 72 hours of Trend data.
1 to 2 hours battery backup.
Nurse call Connection option should be available in monitor.
Audible and Visible alarm.
ACCESSORIES:
OPTIONALS:
PiCCO
NMT
BIS
Total Hemoglobin
Perfusion index
Total oxygen content
Carboxyhemoglobin saturation.
Hemoglobin saturation.
Pleth variability index.
Other Features:
Ac 220v / 50Hz.
Keyboard and mouse
Trend data: graphical and tabular
Arrhythmia analysis feature.
Operating Requirements:
Built-in battery and charger for at least 1 hours on ac power at full parameter or
imported full sine wave ups.
Optional:
Qty of Reusable sensors
HIS & RIS Connectivity
Data transfer and sharing provision through communication port.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
41. Centrifuge Machine 3 TECHNICAL SPECIFICATIONS
Detailed Requirement:
(SSTH-3) Bench top centrifuge machine with angle rotor
Built in speedometer, variable speed control, lid locking and braking device
(FOR BASIS) Maintenance free motor
Lid safety interlock
Noiseless and vibration free
220V 50 Hz, AC
User Adjustable Settings:
Speed 4500–5000 rpm.
Maximum capacity 8/12 x 15ml
Digital control of Timing up to 60min
Displayed Parameters:
Digital display of speed, timing
Rotor Imbalance detection
Accessories:
Complete with standard and operation accessories
Servo Controlled Voltage Stabilizer with surge protection facility
Operating Manual with a Soft Copy
Service Manual with a Soft Copy
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
42. Cervical + Lumber 1 5” or more high-visibility LCD screen.
Traction Unit Traction modes: intermittent, static, progressive, regressive, cyclic, and combinations thereof.
Selectable pulling speed.
(SSTH-1) The number of ramp steps should be selectable from 2 to 9 steps
Pause time of each step should be selectable from 2 to 20 sec.
(FOR BASIS) Free memory stores 30 treatment patterns.
Automatic calibration of traction force.
Both the set value and the actual value should be displayed on the screen.
Technical Specifications
Power supply: AC 100–240 V 50/60Hz
LCD display: 5 “or more
High/Low force range: 1–90 kg (198 lbs) / 0–89 kg (197 lbs)
Hold/Rest time range: 0–99 seconds
Number of ramp steps: 2–9 steps
Pause time of each ramp step: 2–20 seconds
Timer: 1–99 minutes
Free program memory: 30 or more
Standard Accessories
Traction Table Fixed
Patient Switch
Cervical Harness
Pelvic Harness
Power Supply Cord
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
43. Choledoco scope 1 Angle of View: 90 -120
Direction of View: 0
(SSTH-1) Inner Diameter: 1.2mm or more
Outer Diameter: 2.8mm or better
(FOR BASIS) Deflection of Tip: 270 /270 or better
Working Length: 60cm
Compatible Choledoscope adaptor with existing laparoscopic camera
Accessories:
Case for Choledochoscopse.
Pressure compensation cap for ventilation during sterilizations.
Leakage tester with bulb and monometer.
Cleaning brush.
Applicator and guide tube for Choledochoscope for use with trocar size 6mm.
grasping forceps
Micro knife pointed opening the hepatic duct and the bile duct size 5mm length 31cm.
Biopsy forceps, 1mm double action jaws length 100cm flexible.
Grasping forceps, 1mm double action jaws length 100cm flexible.
Stone basket sterile, single use length 120cm package of 10.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
44. Color Doppler with 1 Digital Color Doppler (High End).
Probe Linear, Convex, Color Doppler with Fully Digital Beam former having 2D / M-Mode and Doppler Facilities, (PW,
TVS HPRF, & Color Flow Imaging) with High Resolution Imaging Doppler Signal Quality; having
DICOM Compatibility and Upgradeable to CW and 4D Imaging in Convex, Linear and Endocavity
(SSTH-1) Probe.
1) B-MODE Specification:
(CIF BASIS) a) Sector Scan Angle Variable in Four Steps.
b) Viewing Depth: 30 cm Minimum (Both in B & W and Color).
c) Frame Rate: 500 f/sec or more
d) Built-in cine loop with ability to vary reverse and slow motion of display; Internal
Memory 2000 / 200MB or more Color Images.
e) Real time and Freeze Image Magnification at least 10X or more with panning for
Real, Freeze and Memorized Images.
2) M-MODE SPECIFICATION:
a) Magnification: X2 or more.
b) Sweep Speed: Slow, Medium and Fast.
c) Color Display of M-Mode.
3) D-MODE SPECIFICATION:
a) Pulse-Wave Doppler Measureable Velocity Range.
b) HPRF Doppler.
c) CONTINUOUS-WAVE DOPPLER:
- Measurable Velocity Range: Steerable.
- Must have Doppler Beam Steering and Bi-Directional Stereo-Audio.
d) Colorized Spectrum Display.
e) Automatic Baseline and Velocity Range Control.
f) Live Measurements for Doppler Spectrum.
4) COLOR DOPPLER MODE SPECIFICATIONS :
- Both CW and PW Doppler must be Continuous Steerable in the Color Blood Flow
Image
Mode in Real Time.
- 2D Image with Color, CW and PW Doppler.
- Windows based System for easy usage with Programmable Control Panel Keys.
- Tissue Harmonic Imaging with 4THI or more Frequency.
- Power Doppler.
- Triplex Mode for Simultaneous Display of Color B/M and D-Mode Displays.
- 200 db system dynamic range or more.
5) MEASUREMENT PACKAGE:
To provide Comprehensive Software Package for Measurement of Distance,
Circumference, Area, Time Depth, ANGLE, Velocity, Frequency, Heart Rate, Volumes,
Nuchal Thickness/
Measurement Software to be Provided as a Standard.
6) SYSTEM COMPLETE WITH FOLLOWING FACILITIES AND ACCESSORIES:
- 19-Inches Minimum LCD / LED Color Monitor, with Resolution 1280 x 1024 Pixels
minimum.
- Foot-Switch.
- 3 to 4 Active Transducer Connector for Tran thoracic Probes DVD / CD Drive for Image
Storage to be Built-in to the System.
- 100 GB or more Hard Disk Drive to be Built-in to the System.
- Built-in DICOM Compatibility. (3.0 with all components)
- Touch Command Screen Control at least 8-inches LCD / TFT or more.
- Full DICOM (Upgradable)
Probes must be supplied by same manufacturer.
7) UPGRADEABILITY :
- System Software must be Upgradable.
8) STANDARD PROBES :
- 2 – 6 MHz Multi-Frequency Convex Probe for B/M/CDI/PW and Shear wave
Elastography.
- 5-9 MHz Multi-Frequency Linear Probe with shear wave elastography.
- TVS/ENDOCAVITORY Color PROBE
NOTE: All Probes must be supplied by same Manufacturer.
9) STANDARD RECORDING DEVICES:
- Thermal Paper Printer with fifty Rolls of Paper (Black & White). WITH HD
- CINEWAVE UPS Online with 30 minutes back up time for the System.(IMPORTED)
10) Tissue Doppler Imaging Mode.
11) Pure Wave / Pulse Inversion / Differential Tissue Harmonic Imaging to Enhance Effective
Wide Band Frequency Range to provide Simultaneously Spatial Resolution, Contrast
Resolution and increased Penetration using Two Transmission Pulses at Different
Frequencies Simultaneously and Reception at Harmonic as well as Differential
Component.
12) Auto Image Optimization / Quick Scan Imaging for Automatic STC / GAIN and Doppler
Spectrum Adjustment with Optimal Image Quality by using One Touch Operation.
13) B-Flow / Dynamic Flow Imaging / E-Flow / Clarify.
14) Trapezoid Imaging / Virtual Convex Imaging with Linear Probe.
15) Compound / Aplipure Imaging for THI/both Frequency Compounding and Spatial
Compounding in B/W and Color Mode.
16) Panoramic / SIESCAPE / Logic view Imaging with Measurements.
17) TISSUE CONTRAST ENHANCEMENT SOFTWARE/SPECTRAL REDUCTION
18) N-Sight / Adaptive Suppression / Precision Imaging /Cross beam / XFlow or equivalent to
Enhance B-Mode Imaging, Xress / Ccare / DTCE or equivalent Detailed in Layers and Boundaries
and Sharpened Outlines of the Lesions and reduce Cluttering.
19) Micro CPA / Superb Micro Imaging/vascular enhancement/B flow with Color/spectral to
Clearly Show Blood Flow in tiny Vessels,
20) Shear wave Elastography with Quantification for body Organs specially Liver with
Convex & Linear Probes to visualize Tissue Stiffness by Generating Images through Shear Wave
Propagation.
21) Live Strain Rate Elastography with Quantification for Body Organs Specially Breast to
Visualize Lesions.
22) Voltage : 220V – 240V, 50 – 60 HZ
Accessories :
1. Thermal Printer 256-Gray scale (Sony, Mitsubishi or equivalent)
3. UPS: on line with sine waves 2 KVA with thirty minutes back up time. (IMPORTED)
3. 50 High Density / High Glossy thermal paper Rolls
4. Gel: 20 liters
5. Water Proof dust cover
Optional:
7-14 MHz Multi-Frequency Linear Probe for B/M/CDI/PW
Fusion Imaging of CT / MRI 3D Volume DATA to Synchronize with Ultrasound Imaging.
Complete with Hardware /needle navigation with tracking system.
Contrast Harmonic Imaging Upgradable.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
45. Combo Unit (Tens + 1 Safe-lock lever for control knobs
Ems) Desktop Minimal control knobs for ease of use
Three stimulation modes: constant, burst and modulation
(SSTH-1)
Technical Specifications:
(FOR BASIS) Power supply: 9V battery
No. of channel: 2
Current amplitude: 80mA
Pulse shape: Asymmetrical bi phase rectangular
Pulse duration: 50-200us
Output mode : Constant, Burst and modulation
Accessories:
Rubber Electrode, 40 x 41 mm, 2pcs/pack, 2x
Gel Pad, 40 x 41 mm, 4pcs/pack
Electrode Cable, 2x
Carrying Bag
Country of Origin: USA, EUROPE, JAPAN
2-Channel Electrotherapy Units with All Low- and Medium-Frequency Currents
Provided with the most common currents
4-pole IF, 2-pole IF, EMS, Russian, TENS, Hi-Voltage (HV), Micro current (MCR), DC: Galvanic,
Faradic, Diadynamic (DF, MF, CP, CP-ISO, LP, RS), Traebert (Ultra Reiz),
Diagnostic: I/T curve and AQ
120 free program memories for specific patients
Frequently-used treatment objectives
Three different treatment-end melodies.
Technical Specifications:
Power supply: AC 100-240 V 50/60 Hz
LCD: 7” touch screen LCD/TFT panel
Number of channels: 2 independently controllable
IF carrier frequency: 2, 2.5, 4 or 5 kHz
Frequency: IF 1-250 Hz, TENS 0.5-250 Hz, HV 0.5-250 Hz, MCR 0.3-400 Hz
On/Off time: 0.5-30/1-99 seconds
Vector sweep: 0, 15, 30 or 45°
Timer: 1-60 minutes
Standard Accessories:
Rubber Electrode, 60 x 50 mm, 2pcs/pack, 2x
Electrode Sponge, 80 x 65 mm, 2pcs/pack, 2x
Electrode Cable (Grey)
Electrode Cable (Blue)
Strap (L), 80 x 1200 mm, 2x
Strap (S), 80 x 600 mm, 2x
Power Supply Cord
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
46. CPM (Contour Passive 1 Knee and hip mobilization
Motion Machine) Ankle mobilization
Use of Memory Card
(SSTH-1) Speed control (flexion/extension)
Workout duration control
Resistance
(FOR BASIS)
Automatic extension increases
Automatic flexion increase
Pause during extension
Pause during flexion
Warm Up cycles
Knee movement range: 0° ÷ 110°
Ankle movement range: 20° ÷ 0° ÷ 40°
Hip movement range: -7° ÷ 115°
Automatic extension increase limit
Automatic flexion increase limit
Repetitions at extension limit
Repetitions at flexion limit
Technical Specifications:
Net weight: 14 Kg
Gross weight: 17 Kg
Packaging Dimensions (LxLxH): 103 x 38 x 38 h cm
Power supply: 90 ÷ 250 V - 50 ÷ 60 Hz
Electrical safety: Class I BS EN 60601-1
Electromagnetic compatibility: Group 1 BS EN 60601-1-2
Classification: as per EEC Directive 93/42 Class IIa
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
47. CTG Machine 4 Single, Twin or Triplet Ultrasound
Color LCD Display
(SSTH-2,SSHD-2) Fetal monitor for Antepartum monitoring
FHR range: 50-200 bpm
(FOR BASIS) Ultrasound transducer with marker and recorder for FHR
Sensitive frequency 2Mhz or less
Alarms: Low Bradycardia, High Tachycardia,
Strip chart recorder/ printer
Paper width size: 110 mm or more (The manufacturer shall ensure the availability of
printing
paper minimum for the next five years)
Paper/record Speed: 1,2,3 cm/min
220V/50Hz AC
Battery backup 1 Hour minimum
Accessories:
Mobile Imported Trolley
20 paper roles
20 bottles of gel
Dust cover
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
48. Delivery Table 2 TECHNICAL SPECIFICATIONS
Multiple delivery positions in a single unit
(SSTH-2,) Capability of mobility of transportation within the hospital
Electric functions:
(FOR BASIS) • Height adjustment
• Back section adjustment
• Leg section height adjustment
• Trendelenburg
Extra safety features:
• Manual Trendelenburg
• Manual quick release for back section
Mattress base 3 sectional
Safe working load 200 kg
Trendelenburg 10° Approx.
Back section angle 70° Approx.
Leg section angle 15° Approx.
Height Approx. min-max 650 mm - 900 mm
Bed width Approx. 1000 mm
Mattress base width Approx. 750 mm
Mattress base length Approx. min – max (1300–1900 mm)
Integrated battery back up
Remote Control Operations
Accessories:
Knee crutches, pair
Squatting bar / Hand Bar
Infusion rod
Arm rest
Bowl
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
49. Dental Unit 1 Manually / Automatically adjustable headrest with movable head pad. The headrest
extension can be pulled in or out depending on the patient's height. For upper jaw
(SSTH-1) treatment.
Right armrest Swiveling for entry and exit of patient while left one is fixed
(CIF BASIS) 2 programmable / pre-set chair positions (Mouth rinsing and entry / exit position)
2 programmable chair positions for each user profile
Chair movement through silent electric motors / electro hydraulic system.
Automatic Emergency stop of chair once it meets an obstacle and unit stop chair
instantly.
Synchronized movement of backrest and seat cushion by electric motors / electro
hydraulic system prevents construction/over extension of the patient. The position of
the patient's head on the headrest remains constant when the chair is lowered.
4-way Joystick for adjustment of chair & backrest positions / foot control.
Pneumatic Foot switch for controls of hand pieces, chip air and spray.
Dentist's Element
The control panel can be used for operating functions, preset and programmable
positions .Hand piece holders.
5 hand piece positions including 3way syringe
Hand piece priority system (if one Hand piece in use others will not operate)
Equipped with:
1 x 3-way syringe with autoclavable tip
3x fiber optic hand piece / self generating LED Light.
Removable silicone tray pad
Removable hand piece and tubing for cleaning and disinfection.
Assistant's Element
Swiveling assistant element mounted attached on water unit
Control of function keys of entry / exit position, tumble filling, flushing the cuspidor
and switch the light ON/OFF
Number of hand piece positions including 3way syringe: 3/4
Equipped with:
1 x 3-way syringe with autoclave able tip
1 x High Volume Evacuation hose, autoclave able suction hand pieces with adjustment
suction pressure
1 x saliva ejector hose , autoclave able suction hand piece with adjustment suction
pressure
Water Unit
Automatic Bowl Rinse function
Automatic Glass Fill function with time adjustment
Clean water system with the facility to change from clean (water bottle) to tap water
with switch
Self-suction or ready to connect in case of central suction.
LED Operating Light
For optimum illumination of the treatment site
Flexible positioning via three flexible joints
Anti-glare for the patient through clearly confined luminous spot
No-touch sensor for hygienic hands-free operation, Intensity change and light on/off
Light on/off through control panel and via no-touch sensor
Brightness is 25000 Lux or more, Temperature 4000-5000 Kelvin or above
02x Working Stools
360° swiveling backrest and seat with manual hand release button, mounted on 5-
castors
Generic Name High Speed Air Turbine Hand Piece
Clinical Purpose A dental Air Turbine is a small, high-speed drill used during dental procedures,
usually to remove decay and shape tooth structure prior to the insertion of a filling or crown. A
dental drill may also be used in the cleaning and shaping of root during endodontic treatment,
or to remove old or temporary fillings or crowns prior to the insertion of new or permanent
restorations.
TECHNICAL SPECIFICATIONS
Fixed connection, Midwest type
Ceramic ball bearings
Push button chuck type
Speed (Rpm): 3,50,000 - 400,000
Tipple Spray
Generic Name Electric Scalar (Built-in)
Clinical Purpose Ultrasonic scalars are used to remove calculus rapidly from the tooth surface.
The scaling tip vibrates in the ultrasonic range
TECHNICAL SPECIFICATIONS
Built-in Ultrasonic LED Scalar
Flexible and easy to use with a selection of tips designed for use in specific treatment
areas such as Scaling, periodontology, implantology, endodontics, retrograde root
treatment, micropreparation, filling therapy.
Powerful, efficient and gentle treatment
Large selection of tips for every scaler
Outstanding brightness in scalers with lights
Sterilize-able hand piece and tips
Drive: Piezoelectric
Oscillation: Linear
Oscillation frequency: 28-32 kHz
Illumination: LED
Generic Name Slow Speed Air Motor
Clinical Purpose
TECHNICAL SPECIFICATIONS
Slow Speed Air Motor with Internal water spray and speed range of 25,000 -40,000 rpm or
better-with straight and contra angle attachment
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
50. Dental X-Ray 1 TECHNICAL SPECIFICATIONS
Compatible with Digital Sensors and Traditional Films
(SSTH-1) 100% imported Scissor arm and mobile stand from the original manufacturer
Short exposure times especially suitable for digital imaging
(FOR BASIS) Microprocessor controlled
Tube Current 3.5 mA or better
Tube voltage 60-70 kV or better
Focal point 0.4-0.0mm or better with filtration system
Exposure time automatic adjustable
Patient types: Child and Adult
Automatic Selection of dose by Tooth selection
Timer with integrated circuit
Tube head with 360° rotations with beam limiter
Power on light signal, x-ray emission light signal
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
51. Dialysis Chair 32 DIALYSIS CHAIR
Safe working load up to 200 kg or better
(SSTH-32) Step less adjustment from sitting to shock position
Step less adjustment to comfort position
(CIF BASIS) Manually adjustable footrest
Hand control unit for step less adjustment
Folding upwards and rotatable armrests
Castors Ø 7.5 cm, individually lockable
Neck roll
Dimensions, length x width 200 X 75 cm
Armrests, length x width 65 X 12 cm
Upholstery, length x width x height 220 X 54 X 7 cm
Access height 64 cm or better
Adjustment range of seat inclination 46 degree
Seat inclination between 4 ° – 50 °
All dimensions are to be considered as approximate.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
52. Dialysis Machine 24 HAEMODIALYSIS MACHINE
Various Dialysis Therapies including double needle system & Single Needle with Single
(SSTH-24) Pump.
Dialysis machine system should be open consumable types
(CIF BASIS) Variable Bicarbonate & Acetate Concentration.
And no binding on consumable or disposable
Bicarbonate profiling with monitoring
Variable temperature control
Water Inlet pressure requirement: 1.5 to 6 Bar maximum
Heparin Pump Automatic stop & Bolus with flow rate from 0.1-9.9ml/hour
Programmable Ultra filtration with control or varying rate
Ultra-filtration with or without diffusion
Automatic priming with display
Dialysis machine with touch digital display size 10.4-inches or more
Touch Display 10.4-inches or more for service diagnostic and calibration
Touch Electronic control of flow rate and blood flows
Automatic clean, disinfect and rinsing mechanism, built in heat disinfect system
Should capable to record disinfection history
Should capable to record patient data without/with patient Card
Blood Pump: 0, 50 to 500 ml / minute
Variable Dialysate Flow: from 300 to 700 ml or better
Temperature Control: up to 39 deg. C. (Adjustable)
Arterial Pressure Monitor, Venous Pressure Monitor
Ultra-filtration Rate Control: Range of UFR 0.0 to 3.00 Kg - hour or above.
Air Bubble Detection: Air bubble detector alarm threshold.
Blood leak Detection, Sodium profiling
Bicarbonate profiling / Proportion /Dialysate Profiling
Dialysis Adequacy Monitoring (Kt/v) with graphical Display, Built in Heat disinfect
system
Universal Bicarbonate Cartridge Holder / Bag
Online B.P Monitoring System
Battery backup for at least 20-min, 220V, 50Hz
Accessories:
Optional:
Pediatric Mode (System should have ability to be used on pediatric patients)
DIALYZER REPROCESSOR
Consistent reprocessing of artificial kidney.
Digital display for dialyzer type selection, (low flux, High flux & High Efficiency dialyzer)
Fully automatic integrated reprocessing machine, able to clean, test and fill the
dialyzer with disinfectants.
Multiple selectable programs.
Diagnostic display, alarms, automatic calculating and filling of sterilant into a dialyzer.
Fiber bundle volume and leak test facility.
The reprocessing time will be around 8-10 minutes for each dialyzer.
Power: 220 V, 50 Hz
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
53. Dialysis Machine 1 HAEMODIALYSIS MACHINE
(Portable) Various Dialysis Therapies including double needle system & Single Needle with Single
Pump.
(SSTH-1) Dialysis machine system should be open consumable types
Variable Bicarbonate & Acetate Concentration.
(CIF BASIS) And no binding on consumable or disposable
Bicarbonate profiling with monitoring
Variable temperature control
Water Inlet pressure requirement: 1.5 to 6 Bar maximum
Heparin Pump Automatic stop & Bolus with flow rate from 0.1-9.9ml/hour
Programmable Ultra filtration with control or varying rate
Ultra-filtration with or without diffusion
Automatic priming with display
Dialysis machine with touch digital display size 10.4-inches or more
Touch Display 10.4-inches or more for service diagnostic and calibration
Touch Electronic control of flow rate and blood flows
Automatic clean, disinfect and rinsing mechanism, built in heat disinfect system
Should capable to record disinfection history
Should capable to record patient data without/with patient Card
Blood Pump: 0, 50 to 500 ml / minute
Variable Dialysate Flow: from 300 to 700 ml or better
Temperature Control: up to 39 deg. C. (Adjustable)
Arterial Pressure Monitor, Venous Pressure Monitor
Ultra-filtration Rate Control: Range of UFR 0.0 to 3.00 Kg - hour or above.
Air Bubble Detection: Air bubble detector alarm threshold.
Blood leak Detection, Sodium profiling
Bicarbonate profiling / Proportion /Dialysate Profiling
Dialysis Adequacy Monitoring (Kt/v) with graphical Display, Built in Heat disinfect
system
Universal Bicarbonate Cartridge Holder / Bag
Online B.P Monitoring System
Battery backup for at least 20-min, 220V, 50Hz
Accessories:
Optional:
Pediatric Mode (System should have ability to be used on pediatric patients)
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
54. Dialysis Machine with 4 HAEMODIALYSIS MACHINE
WRO System Various Dialysis Therapies including double needle system & Single Needle with Single
Pump.
(SSTH-4) Dialysis machine system should be open consumable types
Variable Bicarbonate & Acetate Concentration.
(CIF BASIS) And no binding on consumable or disposable
Bicarbonate profiling with monitoring
Variable temperature control
Water Inlet pressure requirement: 1.5 to 6 Bar maximum
Heparin Pump Automatic stop & Bolus with flow rate from 0.1-9.9ml/hour
Programmable Ultra filtration with control or varying rate
Ultra-filtration with or without diffusion
Automatic priming with display
Dialysis machine with touch digital display size 10.4-inches or more
Touch Display 10.4-inches or more for service diagnostic and calibration
Touch Electronic control of flow rate and blood flows
Automatic clean, disinfect and rinsing mechanism, built in heat disinfect system
Should capable to record disinfection history
Should capable to record patient data without/with patient Card
Blood Pump: 0, 50 to 500 ml / minute
Variable Dialysate Flow: from 300 to 700 ml or better
Temperature Control: up to 39 deg. C. (Adjustable)
Arterial Pressure Monitor, Venous Pressure Monitor
Ultra-filtration Rate Control: Range of UFR 0.0 to 3.00 Kg - hour or above.
Air Bubble Detection: Air bubble detector alarm threshold.
Blood leak Detection, Sodium profiling
Bicarbonate profiling / Proportion /Dialysate Profiling
Dialysis Adequacy Monitoring (Kt/v) with graphical Display, Built in Heat disinfect
system
Universal Bicarbonate Cartridge Holder / Bag
Online B.P Monitoring System
Battery backup for at least 20-min, 220V, 50Hz
Accessories:
Optional:
Pediatric Mode (System should have ability to be used on pediatric patients)
WRO SYSTEM
WRO Water Purification System
Meets the highest industry standard (AAMI) for pure water of AAMI or greater of
quality for Water to Dialysis Machines and Renal Patients for improvement in quality
of life with highest innovation.
Configuration
RO Water Purification System to operate 06-8 Dialysis Machines
Direct feed to Dialysis Machines through UV sterilizer
Mounted on SS305 SKID (corrosion proof)
RO internal Plumbing HDPVC Schedule 80
Product & Reject Flow Meters
Product & Reject ONLINE TDS / Conductivity Meter
Manual Operation in Case Electrical Control Panel Failure
Includes Pre Treatment
a. Cartridge Filter Size
b. Feed Booster Pump 220 VAC,
c. Multimedia Filter
d. ACF Chlorine (KDF) Filtration
e. Water Softener
f. UV Sterilizer
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
55. Drill System Electric 1 Drill System Electric and Battery Operated.
and Battery Operated 1.Cordless Battery operated electric hand piece with quick release drill attachments
with Complete 2. Instrument forward reverse and oscillating mode.
Accessories 3. Hand piece and all attachment fully machine washable
4. Control method : triggered
(SSTH-1) 5. Speed : 0-1000rpm or better
6. Cannulation : 4.1mm or better
(CIF BASIS)
7. Saw type reciprocating
8. Speed :6500 - cycle/min or better
9. Sagittal Saw/Oscillating saw:
10. Speed :0-11000 cycle/min or better
11. Quick change attachments locking mechanism sagittal saw attachment, Burrs/Blades,
Oscillating saw
with separate Hand Pieces,
12. Wire and pin drive attachments.
13. K-wire driver, Reamer attachment and Drill Bit attachment.
Accessories:
Sterilization Container
Optional:
Foot Control Switch
Extra Battery ( The end-user will ensure the functioning of main and extra battery on regular
basis)
Note:
The minor variation in sizes would be acceptable and shall not be considered as reason of
rejection
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
56. ECG Machine Three 4 TECHNICAL SPECIFICATIONS
Channel Three channel ECG on at least 5 inches LCD display.
Display of Three channel ECG simultaneously.
(SSTH-4) Automatic Operation
Variable gain: 1/2, 1, 2 cm/mV
(FOR BASIS) Thermal recorder for printing out of Three channels simultaneously
Interpretation Software.
Recording Trace speed: 10, 25 and 50 mm/sec
Muscle artifact and AC (50Hz) interference filters
Defibrillator protection
Built in AC Supply and battery operation with 30min backup
Built-in AC interference, Noise filter and Baseline connection.
Capability to interface with LAN/WLAN for data transfer
Paper Rolls, 50
Accessories:
Complete with standard accessories, including separate patient cables for Adult, use
with re-usable electrodes
Mobile Cart Imported
No. of Electrodes
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
57. Electric Treadmill 1 Professional treadmills for rehabilitation use that are ideal for health care facilities and large
3.5HP physiotherapy units. Powered through the mains supply, they have a console that allows the
following functions:
(SSTH-1) Speed and incline adjustment;
Liquid crystal display indicating heart rate, speed, time, distance and incline;
PROFILES:
(FOR BASIS)
10 basic profile that can be modified by varying speed, incline and time separately;
100 free profiles with the option to set time, tilt and speed for each of the 20 steps;
CARDIO:
Cardio exercise is a constant pulse rate training (until reaching 80% of one’s maximum
theoretical heart rate), as the machine automatically adjusts the speed level so the heart beat
remains within the set maximum heart rate;
FAT BURNING:
Fat burning exercise is a constant pulse training (until reaching 65% of one’s maximum
theoretical heart rate) as the machine automatically adjusts the incline level so the heart beat
remains within the set maximum heart rate;
FOUR TESTS:
Two auto tests – CHR (Constant Heart Rate) and CWL (Constant Work Level) – allow you to
exercise at a constant heart rate and load. The third test, i.e. RUNNER TEST, allows you to
exercise with an increasing load by stepping up the speed by 1 km/hper minute. The fourth
test, i.e. COOPER TEST, allows you to exercise for 12 minutes and assess the maximum distance
covered.
INDIVIDUAL DATA:
Setting the user’s individual data (age and weight);
COUNT DOWN:
Exercise program with decreasing workout duration.
Specifications:
Dimensions:
210 x 80 x 150h cm
Walking deck:
154 x 51 cm
Weight: 180 kg
Max user weight: 220 kg
Max workout speed: 25.0 km/h
Console:
Touch screen 10”
Min constant workout speed: 0.1 km/h
Max reverse motion speed: 0 - 5 km/h
Speed increments: 0.1 km/h
Incline: From 0% to 30%
Emergency stop: Button and pull-wire
Incline and speed change: Electronic
Self-centering belt alignment system: Yes
Self-lubricating belt system: Yes
Isolation transformer: 1900 VA
Max peak motor: 7 HP (AC)
Fuji Inverter drive: Yes
Power supply: 220/240 V - 50-60 Hz - 12 Amp
Incline auxiliary circuit supply: 18 V ac low voltage
Console auxiliary circuit supply: 12 V cc low voltage
Input power with motor running at max: 3000 VA
Rated input power: 2500 VA
Sound power: < 30 dB
Audible tones: When pressing keys
Shock absorbing table: Yes
Serial interface with Track master protocol: Yes
Transport wheels: Yes
Output: RS232 Sound power: < 30 dB
Audible tones: When pressing keys
Shock absorbing table: Yes
Serial interface with Track master protocol: Yes
Transport wheels: Yes
Standard Accessories:
Heart rate monitoring with chest strap
RS232 output
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
58. Electro Surgical Unit 5 TECHNICAL SPECIFICATIONS
Bipolar 400 Watt Microprocessor based electrosurgical unit for normal and under water cutting usages.
Automatic self-test function.
(SSTH-5) Operation in radio frequency range.
Controls for cutting, coagulation, spray and blends.
(CIF BASIS) Monopolar cutting power of 400 watts.
Bipolar cutting power of 80 watts.
Mono polar coagulation power of 100 Watts.
Bipolar coagulation power of 50 Watts.
Spray coagulation mode.
Different gradations of blending of cutting and coagulation power.
Digital display of all controls and set values of cutting and coagulation power.
Audio and visual alarms.
220V, 50 Hz.
Accessories:
Monopolar handle with cord.
Bipolar forceps with cord.
Trolley having anti-static lockable wheels.
Attachment for monopolar coagulation.
Knife electrode.
Surgical electrode, ball-shaped.
Wire loop electrode.
Needle electrode.
Ball electrode.
Bipolar coagulation forceps.
Reusable silicon patient plate.
Double paddle foot switch, explosion proof.
Trolley with lockable antistatic castors.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
59. Eliza Fully Automated 1 FULLY AUTOMATIC MULTI WASH AND ELISA TEST READER
Detailed Requirement:
(SSTH-1) Open system fully automated Microprocessor Controlled Micro Plate/Batch ELISA
Analyzer with LCD Monitor and data recording system
(CIF BASIS) Unit with automatic sample identification, dilution, incubation, conjugation, washing
and reading facility
(The Reader should be open and programmable, selectable interpretation facility with
LCD display, Optical density 3.0 or more)
System should have programmable incubation and micro-plate shaking
System Should be able to work in sessions
At least 3 integrated liquid buffer tanks
The washer should be of have multiple heads
LAN/ WLAN port to share the data with hospital network
RS 232 or USB Interface
220V 50 Hz, AC
User Adjustable Settings:
Programmable for 4 Plates of 96 wells with filters 405-620 nm with at least 6 filters
Throughput 4x96 samples test i.e. Infectious profile, Hormones Profile, Auto
antibodies, Vit-D level, Immunoglobulin, Tumor markers, Auto immuno panel
12 or more assays for micro-plate
Up to 12 assays profile
Unit based on at least 2 micro-plate principal and 2 incubation positions
System should have possibility to detect clot and to check volume intake
The facility for Auto clot detection, sensor probes for reagent and samples have been
added
System should have possibility to run 24 or more controls with 18 or more position for
reagents 8 or more suction channels and at least 8 dispensing channel
Displayed Parameters:
Digital display for results
Accessories:
Complete with standard and operation accessories;
Built-in or External Laser Printer
Imported Compatible Sine wave UPS for back up of up to 30 minutes (Emerson,
Liebert,Chloride, MGE, APC or Equivalent)
Operating Manual with a Soft Copy
Service Manual with a Soft Copy
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
60. Emergency Trolleys 6 EMERGENCY TROLLEY / CRASH CART FULLY EQUIPPED
(imported) With
Defibrillator Stainless steel / ABS top.
Three or more drawers
(SSTH-6) Lower cupboard with central locking / securing all drawers and cupboard
Operated by cupboard door and use of security seals
(CIF BASIS) Double hook stainless steel I.V. Pole
Push handle
Quality cushion castors (2 x braking)
2 x stainless steel cylinder holders / strap
Cardiac board 600 x 400 x 55mm with stainless steel housing brackets at rear of
trolley.
Universal rail system fitted to width of trolley.
Accessories :
Aneroid sphygmomanometer with Peads & infant Velcro cuff and rail clamp
Electronic timer and rail clamp
Venturi suction unit with O2 outlet and 2.0 liter jar
Suction tube and connecting tubing
O2 flow meter fitted to O2venturi outlet 0-15 lpm
Pin index regulator with outlet for connection to remote venturi hose and O2 outlet
Oxygen cylinder Qty 01 fitted with trolley
Intubation set comprising:
Macintosh laryngoscope with 4/5 blade set
Magill introducing forceps
Paeds resuscitator
Disposable E.T. tubes Set
Guedel airways
Pen torch
Artery forceps
Dressing scissors
Set of plastic tubes
Examination light to rail clamp
Defibrillator:-
Biphasic transthoracic (external) defibrillator with LCD colour display
Synchronized output with ECG.
Energy selection & delivery on control panel and paddles for external defibrillation.
Energy selection and delivery on control panel for internal defibrillation.
Charging Indicator
The energy range should be adjustable for peads and adults up to 200Joules.
Charging Time for full energy should be less than 05 sec
Screen Size of approx. 5 inch colored.
Display of HR, ECG through paddles and Lead I.II & III patient cable.
Built in recorder for printing of full summery on standard 50mm paper.
Alarms for High and low Heart rate, low battery warning.
Built-in Rechargeable battery with charger for minimum 50 shocks at max energy.
Auto tester/self check.
External Paddles (Adult, Pead, Neonate)
AED facility with cable.
Pacing facility
AC 220V / 50Hz operated.
Accessories:
Complete with standard accessories, including reusable type Adult, Pediatric &
Neonatal sensors
Original trolley/cart
Optional:
Qty of Reusable sensors
Internal Paddle(Adult, Pead, Neonate)
Charging Time for full energy should be less than 07 sec
ETCo2
Spo2
Disposable pacing pads
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
61. Fluoroscopy X-Ray 1 DIGITAL RADIOGRAPHY/FLUOROSCOPY (RF ROOM)
Unit 1000 MA Digital Radiography/ Fluoroscopy unit of high quality digital imaging chain, optimal dose
conservation, high patient throughput with over table tube and Flat Panel Detector.
(SSTH-1) The output of the X-ray high-voltage generator should be 80 kW. The X-ray control
should use a high-frequency inverter.
(CIF BASIS) The tabletop move approx. 20cm or more in the lateral direction. The detector
movement covers form edge to edge of the x-ray table. The table tilts should be from
the upright vertical position (approx. +90°) to the horizontal position (0°) to the head-
down-tilt position (approx. - 15°).
The tabletop should be Flat/convex type to allow patient centering.
The startup time should be short.
X-Ray Diagnostic Table:
Table tilting
Tilt range: Upright vertical position (approx.90°) Horizontal position (approx. 0°) Head-
down tilt position (approx. -15°)
Compression force of the compression cone: 80 N or more
Allowable patient mass: Max. 150kg minimum.
X-Ray High Frequency Generator:
Ratings
High-voltage generation method: Inverter method
Short-time ratings: 800mA at 100kV.
Nominal maximum electric power: 80 kW Radiography
Radiographic tube voltage setting range: 40 kV to 150 kV, in 1-kV increments
Radiographic tube current setting range: 25 mA to 1000 mA
Radiography time setting range: 1.0 ms or less
Automatic Exposure Control (AEC):
Anatomical Settings should be available
Radiographic condition automatic setting:
The radiographic conditions should be automatically set
X-ray tube anode heat monitoring:
Fluoroscopic tube current setting range: 0.5 mA to 4.0 mA in 0.1-mA increments
Automatic Brightness Control (ABC) function
Pulsed rate setting range variable up to 15 frame/s
X-Ray Tube:
Focal Spot (mm): 0.6 & 1.0/1.2.
Anode Heat Storage Capacity of 600KHU or more.
X-Ray beam limiting device:
X-ray exposure field size 43x43 cm
Built-in light field lamp.
FLAT PANEL DETECTOR: -- CSI or better with size 17”x14” inches or more.
Effective number of pixels: 2600 pixels × 2200 pixels or more (vertical × horizontal).
Pixel size: 160um or better.
DQE: 60% or better.
Spatial resolution: 3.4 lp/mm or more
DIGITAL IMAGING SYSTEM:
Basic image processor performance Images from the detector should be input in digital
format.
Image storage
Capacity of hard disk: 50,000 images for 1024 × 1024 or 1TB HDD.
2-Image display Monitors one for last imaging mode and one for live imaging mode.
System monitor display for Playback images, processed images, multi- images, etc.
Monochrome Medical grade live monitor 1280 × 1024 pixels (SXGA) for Digital
fluoroscopic images, fluorography images, playback images one in room with Original
Trolley & One on Main Console Monitor for LIH.
Fluoroscopic function
Image processing
• Recursive filter
• Last image hold
• Image flipping
• Spatial filter (edge enhancement, smoothing)
• Digital Compensation Filters.
Recording
Fluoroscopic image and last-image-hold image can be stored to hard disk.
Fluoroscopic image acquisition
• Frame rate variable up to 15 fps
Fluorography function
Images should be recorded to hard disk processed, and displayed on the monitor.
Real-time image processing: Digital Compensation Filter and Noise Reduction Filter.
Post processing
Gray scale: Adjustment of contrast and brightness
Filming
Two Tray Laser imager with multi-sizes Printing of 14 x 17 and 8 x 10.
Provision of DICOM 3.0 facility
Power Requirements
Line voltage: Three-phase, 200-440VAC
Line frequency: 50 Hz
Permissible line voltage fluctuation rate (no load): ±10%
Accessories:
Online sine wave Double Conversion 160KVA UPS for digital radiography system, with
a minimum backup time of 10 minutes on full load.
Lead apron adult large size quantity 03 imported.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
62. Gastroscope High End 1 TECHNICAL SPECIFICATIONS
with Digital Camera High Definition Video Gastroscope with CCD / CMOS and advanced technological features
Field of view 140 degree
(SSHD-1) Direction of view Forward viewing
Depth of field 2 -100 mm or better.
(CIF BASIS) Insertion tube diameter: 9.8 mm or less
Channel inner diameter: 2.8 mm or more
Bending Section: Up 210°, Down 90°, Right 100°, Left 100° or better
Working Length: 1030 mm or more
Observation facility for greater contrast of blood vessels and mucosa.
Accessories. With slandered accessories
Imported Compatible Sine wave UPS for back up of up to 30 minutes (Emerson,Liebert,
Chloride, MGE, APC or Equivalent)
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
63. Hematology Analyzer 1 HAEMATOLOGY ANALYZER (6 Part)
Detailed Requirements:
(SSTH-1) Fully Automated Microprocessor Controlled.
Fluorescence Flow Cytometry to perform WBC, WBC 6 DIFF, RET.
(FOR BASIS) Hydrodynamic focusing DC Detection Method for RBC, PLT.
Cynide Free SLS method for HGB.
License for PLT-F, Ret-He and strong scatter gram identification for MP
Auto Rerun, Repeat & Reflex functions.
Specific Body Fluids Analysis.
Sample Mode, Low WBC Mode, Pre-dilution Mode
Sample Auto Loading
Reagent Management Capacity
Random Access Retics Analysis with Reportable IRF, LFR, MFR.
RS232/USB interface
220V, 50 Hz operated
User Adjustable Settings:
Through put 60 samples/hour or more
Reportable Parameters: Minimum 40 parameters 5-Part differential including HGB,
RBC, HCT, MCV, MCH, MCHC, RDW-SD, RDW CV, MPV,WBC, NEUT%, LYMPH%,
MONO%, EO%, BASO%,IG%,NEUT#, LYMPH#,MONO#, EO#, BASO#,IG#,PLT-I, PLT-O, P-
LCR, PDW, PCT, IPF #, IPF, RET%, RET#, LFR, MFR, HFR, IRF, RET-He, WBC-BF, RBC-BF,
MN%, MN#, PMN%, PMN#, TCBF#
Sample Volume: Max 70 ul or less
Displayed Parameters:
LCD display with touch screen
Patient data entry and specimen recognition by keyboard/LCD Touch Screen/Bar Code
Patient data and results storage for 10,000 Results or more
Accessories:
With specimen mixer and auto sampler;
With Built-in Thermal Printer or External Laser Printer
Consumables, reagents, calibrators, controls for start up
Compatible Imported Online Sine wave UPS with Battery backup for 30 minutes
(Emerson, Liebert, Chloride, MGE, APC or Equivalent)
Operating Manual with a Soft Copy
Service Manual with a Soft Copy
Note:
To be used only for specialized care of bone marrow and will be certified by the end
user / procuring agency
Availability of Reagents and Kits must be ensured and guaranteed by the supplying
firm in the local market.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
64. Head Light with 3 LED Headlight white light, lightweight model, control unit and rechargeable battery
Magnifying Loops box on headband, charging unit, illumination area adjustable in diameter with 40 cm
working distance.
(SSTH-3) Including:
LED Headlight
(FOR BASIS) Battery Box
Charger USB
Headband
including:
Mains cord
Accessories:
(3 Magnifying loops ; 1 for head light ENT SSTH, 2 for Main OT SSTH)
Optional (If any):
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
69. Laparoscopic Non 3 Clip Applicator 10 mm. L.T 400
Traumatic Grasper / Crocodile Forceps 10 mm.
Clipper Crocodile Nontraumatic Forcep 5 mm.
Forceps
WARRANTY 03 YEARS
(SSHD-3)
Country of origin USA/EUROPE/JAPAN
(FOR BASIS)
70. Laser Printer for 1 PRINTING SYSTEM FOR DIGITAL X RAY
Digital X-Ray DICOM 3.0 compliant Grayscale Dry LASER Printer with 3 online sizes.
Should have minimum productivity of 150 films/ hour in mixed sizes.
(SSTH-1) Printer should be capable of printing 08x10, 10x12, 11x14, 14x14 & 14x17 size films.
Minimum resolution should be10 pixels/mm with 12-bit gradation.
(CIF BASIS) Accessories:
Online UPS 10 KVA with ten minutes back up time.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
71. Microscope 3 BINOCULAR MICROSCOPE
Detailed Requirement:
(SSTH-3) Standard microscope with infinity color corrected optics
Binocular head, adjustable inter papillary distance
(CIF BASIS) Tube head with an inclination of 30 Degree or more
Rotating quadruple/quintuple nose piece
2-layer with mechanical sliding stage, XY moving range
Condenser carrier, vertically/horizontal adjustable
Bright field condenser, N.A. of 1.25
Aperture iris diaphragm
LED illumination
220V 50 Hz, AC
User Adjustable Settings:
Coaxial coarse and fine focusing system, with focusing stop mechanism
Variable intensity control system
Eyepiece lenses:-
10x wide field, focusable,
Objective lenses (Achromat):-
4xScanning lens
10X
20X
40x
100x oil immersion
Accessories:
Complete with standard and operation accessories;
Carrying case
Dust cover
Immersion oil
Operating Manual with a Soft Copy
Service Manual with a Soft Copy
Optional:
Polarizing lense/attachment
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
72. Microtome Automated 1 AUTOMATIC MICROTOME
Detailed Requirements:
(SSTH-1) Fully automated rotary microtome
Automated sectioning can be operated via velocity knob
(CIF BASIS) Accidental start prevented by double click operation
Ergonomic removable control panel can be located on either side of the microtome
Memory function for specimen positioning
Touch-pad keyboard to select section thickness sectioning mode, speed and memory
function
Easy switch between thickness setting for TRIM and
SECTION/FINE
X/Y fine orientation with reproducible zero positioning
"Rocking mode" speeds up the trimming process by transmitting the movement of the
hand sheel directly to the object
Automatic brake following motorized action
Easily accessible emergency stop button
4 motorized modes of operation (single section, interval, multi sections, and
continuous
Programmable cutting window
Motorized specimen advance
Specimen retraction / can be deactivated
Longest stroke length available (60-70mm) allows high quality sections even of Macro
/ Super Mega cassettes
Large removable section waste tray covers the entire working area
User Adjustable Setting:
Cutting Stroke: 60-70mm
Total Specimen Advance: 28mm
Section Thickness Range: 0.5 - 100μm
Trim Thickness Range: 5 - 300μm or more
Retraction : 40μm
Sectioning Speed: 0 - 450mm/s
Accessories:
Compatible Imported Online Sine wave UPS with Battery backup for 30 minutes
(Emerson, Liebert, Chloride, MGE, APC or Equivalent)
100ml Para/Guard TM or equivalent, Standard tools, brushed aluminum cover plate,
dust cover
Universal Cassette quick release Clamp orienting head
Disposable blade holder
Disposable Microtome blades Pk/50
Operating Manual with a soft copy
Service manual with a soft copy
Optional:
Foot Paddle
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
73. Nephroscope 24cm 1 FLEXIBLE NEPHROSCOPE SYSTEM & ACCESSORIES
Flexible Nephroscope System, consisting of
(SSTH-1) Nephroscope
Dilatation Set
(FOR BASIS) Grasping forceps
Biopsy forceps
Three /Two Prong grasping forceps
Alligator type forceps
Suction Tubes
Maintenance kit, carrying case.
Sterilizing case
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
74. O.T Light (Portable) 1 MOBILE OPERATION LIGHT
Mobile LED emergency shadow less operation theater light.
(SSHD-1) Hermetically dust proof LED head.
Luminance at 1m distance 130,000 lux or above.
(FOR BASIS) Color temperature 4000°-5000° degree kelvin or better.
Light field diameter between 15 – 30 cm or better (required lux should be available
within max. light field area).
Color rendering index 94 or more.
LED life 50,000 hours or more.
Temp. rise in surgical surface <2° C
220 V / 50 Hz 1 phase.
Built-in rechargeable battery backup for at least 2 hours.
Autoclaveable handles.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
75. Operating Microscope 1 OPERATING MICROSCOPE (TEACHING OPERATING MICROSCOPE WITH ELECTORMAGNETIC
for Eye BRAKES)
Floor mounted stand, microscopic body with linear motorized zoom (1:5 or better),
(SSTH-1) Built in coaxial illumination, motorized fine focusing, coarse focusing (Manual or
Motorized).
(CIF BASIS) Electromagnetic brakes
Objective: f=200.
Motorized XY coupling.
Binocular tube inclinable at various angles
Eyepiece: 10x or 12.5x with dioptric adjustment.
Fully apochromatically corrected optics with high light transmission.
Sterilization protective caps for all drive knob 03 sets.
Halogen illumination with controllable intensity / Light Emitting Diode, with or without
fiber optic cable.
Water proof foot control panel.
Up gradable with accessories.
Adjustable speed for focus, zoom and XY.
Binocular stereoscopic assistant’s attachment with inclination
CCTV attachment including adapter, 3 CCD or CMOS Camera with or withour beam
splitter.
Digital recording system/USB recording with hard drive.
20” or better LCD or LED monitor (In case of Medical grade) / 30” or better LCD or LED
monitor
(In case of non medical grade) (i.e to specify).
Retinal vision system with attachment. Including (120o, 90o, and Macular lens)
ACCESSORIES:
Dust cover.
06 spare bulbs (in case of halogen illumination).
UPS: Online sine wave compatible UPS with 20 minutes backup
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
76. Operation Theater 3 CEILING OT LIGHT
Light Double Doom LED shadow less operation theatre ceiling light, hermetically sealed dust proof.
Adjustable light intensity 160000 LUX at 1 meter distance.
(SSTH-3) Satellite combination of 160000 LUX at 1 meter.
Color temperature 4000°-5000° Kelvin.
(CIF BASIS) Electronic control panel For light field diameter and light adjustment.
Color rendition index of 94 or more.
LED life 50,000 hours or better.
Autoclaveable handles.
Operating Voltage 220V, 50Hz.
Optional:
(i) Integrated digital camera system:
Resolution: Full HD (1,920 x 1,080 Pixels)
Video outputs: 2x HD-SDI or 1x HDMI/DVI-D
Provision of Video transmission facility
Medical graded LCD/LED 26’’ minimum along with mountings.
(ii) Third arm of 160000 LUX at 1 meter.
(iii) UPS for at-least 2 hours battery backup.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
77. Operation Theater 3 ELECTRO-HYDRAULIC/ELECTRO-MECHANICAL OPERATION TABLE
Table Electrical Weight bearing capacity of 200kg or more
4-5 Sectional Operation Table with Single Leg Section
(SSTH-3) Table top equipped with radiolucent material.
The mattress covers with washable, antistatic material.
(CIF BASIS) X-ray Cassette holder for X-Ray and C-Arm facility
Electric Height adjustment: 750 to 1000 mm or more.
Electric Trendelenburg/Reverse Trendelenburg: 25° / -25° or better.
Electric lateral tilt: 20° / -20° or better.
Manual/electric backrest adjustment:70° / -15°or better.
Manual leg section adjustment: 20° / -90° or better.
220-230 V, 50 Hz.
Hand control unit.
Override panel in the column for back up control in emergency cases.
Battery backup control of table in case of main power failure.
Accessories:
Arm rest with clamp
Fixation strap
Anesthesia screen
Adjustable leg rest pads
Large width body strap
Adjustable bottle holder rod
Shoulder support
Optional (ACCESSORIES): End-user to specify.
Provision Of Sliding Table Top
ORTHOPAEDIC ACCESSORIES
Leg traction device with boots, straps etc.
Accessory trolley.
NEUROSURGERY ACCESSORIES:
Wilson frame complete with Patient care kit
Can be used on any general surgical table
Allows 360 degree unrestricted radiolucency
Allows unrestricted C-arm access
Head Frame with following accessories
Basal frame complete
Quarter frame
Slide Adjuster for retractor
Head holder with standard head pins
Table attachment
Spatula 6 mm & 4 mm or equivalent
OPHTHALMOLOGY/ENT ACCESSORIES
Eye/ ENT head rest.
UROLOGY ACCESSORIES
Kidney elevator/ Flex, Reflex
Knee crutches with pads
Liquid Basin
Accessories trolley
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
78. O.T Light in Labor 1 TECHNICAL SPECIFICATIONS
Room Portable Single Mobile LED emergency shadow less operation theater light.
Dome (Mobile) Hermetically dust proof LED head.
Luminance at 1m distance 130,000 lux or above.
(SKP-1) Color temperature 4000°-5000° degree kelvin or better.
Light field diameter between 15 – 30 cm or better (required lux should be available within max.
light field area).
(FOR BASIS)
Color rendering index 94 or more.
LED life 50,000 hours or more.
Temp. rise in surgical surface <2° C
220 V / 50 Hz 1 phase.
Built-in rechargeable battery backup for at least 2 hours.
Autoclaveable handles.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
79. Phaco Emulsification 1 OPHTHALMIC PHACOEMULSIFICATION UNIT
Machine Main console with surgeon setting programming.
Phaco modulation choice of pulse and burst mode.
(SSTH-1) Vacumm 0-500 mmHg or better
Provision for 2.2 & 2.8 mm tips.
(CIF BASIS) Programmable foot pedal.
Peristaltic pump.
Irrigation/ Aspiration and phaco emulsification hand pieces
I/A collection cassette or bag (Quantity 3)
I/A test chamber (Quantity3)
Irrigation sleeves (Quantity3)
Phaco needle 30 deg bevel round (Quantity 3) and Bend tip (Quantity 3).
Reusable anterior vitrectomy cutter (Quantity3)
Phaco hand piece (Quantity 2) metal luer lock with sterilization box.
ACCESSORIES:
With Original trolley Dust cover
UPS: Online sine wave compatible UPS with 20 minutes backup
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
80. Platelet Incubator + 1 PLATELET INCUBATOR WITH AGITATOR
Agitator Detailed Requirement:
Internal made of stainless steel
(SSTH-1) Dual Pane, Tempered glass door
Bacteria resistant
(FOR BASIS) Forced air circulation
Key Lock
RS 232 or USB Interface
220V 50 Hz, AC
User Adjustable Settings:
40-50 Bags Storage
Continuous control of temperature
Displayed Parameters:
Digital display for temperature
Motion Failure Alarms
Accessories:
Complete with standard and operation accessories;
Chart Recorder
Operating Manual with a Soft Copy
Service Manual with a Soft Copy
With UPS sine wave dry battery with 30 mint backup
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
81. PT / APTT Analyzer 1 SEMI AUTOMATIC COAGULOMETER
Detailed Requirement:
(SSTH-1) Semi- automatic 4 channel open system
Optical system for end point reading
(FOR BASIS) RS 232 or USB Interface
220V 50 Hz, AC
User Adjustable Settings:
Minimum capacity of 8-10 cuvettes
2-reagents positions
Displayed Parameters:
Digital display for results
Accessories:
Complete with standard and operation accessories;
Built-in or External Laser Printer
Imported Compatible Sine wave UPS for back up of up to 30 minutes (Emerson,
Liebert, Chloride, MGE, APC or Equivalent)
Operating Manual with a Soft Copy
Service Manual with a Soft Copy
Optional:
Complete with automated pipettes and quick start
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
82. Pulse Oximeter with 4 Pulse Oximeter
Probe Non-invasive measurement of oxygen saturation and pulse rate with LCD screen.
Display of oxygen saturation and pulse rate.
(SSTH-4) Oxygen saturation measurement range from 0 -100%.
Pulse strength perfusion indication
(FOR BASIS) Capability of Plethesomography.
Pulse rate measurement from 20-250 bpm.
Visual and audible indication of alarms.
High and low alarms settings.
Power of 220 V/ 50 Hz
ACCESSORIES:
Complete with standard accessories, including reusable type Neonatal sensors
OPTIONAL:
02 Quantity of Reusable sensors
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
83. Resectoscope With 1 TECHNICAL SPECIFICATIONS
Telescope 30 Light Cystoscope With Accessories (For Adults)
Sources & Ellic Telescope 30¢X Degree, 4mm, Autoclaveable length 30cm
Evacuator Cystoscope-Urethroscope Sheath 19 to 25 Fr, with Obdurate
Light Cable
Cystoscope-Urethroscope Sheath 17 to 20 Fr, with Obdurate
Telescope Bridge with 1 Lockable instrument channels
(SSTH-1)
Grasping Forceps Compatible Double action jaws, Flexible Length 30 to 40 cm
(CIF BASIS) Resectoscope With Accessories (For Adults)
Telescope 25¢X- 30¢X Degree, 4mm, Autoclaveable length 30cm
Working element active / passive.
Resectoscope sheath, including connecting tubes for in and outflow
26Fr, Rotatable inner tube with ceramic insulation
Outer Sheath 26 FR
Inner Sheath 24 FR
Standard Obturator
Visual Obturator
Unipolar High Frequency cord, with 4mm plug, Length 300cm
Glass syringe 100ml to 150ml
Cutting Loop
Urethrotome (For Adults)
Telescope 0¢X - 12¢X Degree, 4mm, Autoclaveable length 30cm
Working element active/ passive.
Urethrotome Sheath, 21-22Fr, with channel for Fusiform Boogies
Obturator, for Urethrotome sheath, 21-22Fr
Supplementary Sheath, half round to insert a balloon catheter
To slip on Urethrotome sheath
Set of 4-5 Cold knife
Stone Punch (For Adults)
Stone working element
Sheath for working element
Obturator for Sheath
Evacuator
Accessories:
Fiber Optic Cable
Length: 3.5mm - 4.2mm
Sterilization Container
Inner & Outer Sheath
Light Source
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
84. Semi-Automatic 26 Motorized semiautomatic Hospital bed suitable for use in Intensive Care Unit
Electrical Beds with Bed Intensive Care bed with removable head and foot panels made of HDPE (High Density
side Cabinet, Over Bed Polyethylene)
Table, Mattress Splitted side rails made in HDPE (High Density Polyethylene)
External dimensions of Bed Minimum 21 75 x 990 mm
(SSTH-14, Safe working load minimum 250 KG
SSHD-8,SKP-4)
Height adjustment 400 to 800mm with control of hand held, Bilateral foot and nurse
control panel
(CIF BASIS)
Trendelenburg / anti Trendelenburg position +17º/ -17º with Automatic release by
pressing a single button up to maximum Trendelenburg position
Back raise Position angle 68º
Leg rest position angle 30º
Foot rest Position angle 25º
X-ray cassette holder with translucent HPL back-rest section To facilitate use of the C
arm / x-ray
ABS twin casters Ø150mm with protection fenders
4 sectional Modular mattress platform boards made in PPC easily removable
Pedals operated central locking system
Battery Back-up with alarm system
Auto CPR and Manual CPR both positions obtain by pressing a single button
Cardiac CHAIR position with Automatic release by pressing a single button
Angles/Level gauges to Obtain exact positions
The foot end must has a retractable rack for linen storage
MATTRESS
Mattress should made in a polyurethane foam body sectioned laterally with minimum density
of 25 Kg/m3. The design of mattress allows the surface articulations to maximize the patient
comfort. It must have a standard water proof & Fire retardant cover with anti-allergic
treatment that prevents the microorganisms spread.
BED SIDE CABINET
Made of Highly robust epoxy coated finish metallic body with steel sheets and minimum height
of 620mm. Interior shelf and ventilated bottom removable for sanitary disinfection. Bilateral
opening drawer & doors. Meal tray with protective edge, height adjustable with 360º swivel
facility. ABS shielded Ø75 mm twin casters with protective Bumpers and must have lock
capability
OVER BED TABLE
Made of epoxy coated finish steel structure with height adjustable facility. Top decorative
board thickness minimum 16mm. Lateral tilting for reading. Rolling base with 4 twin castors
minimum Ø50mm with lock capability.
ACCESSORIES
I.V. Rod. Stainless steel column. Height adjustable rod with 4 hooks.
Oxygen cylinder holder with headend/footend Fittings made of Stainless steel.
Urine bag hooks Bilateral on bed metal frame.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
85. Short Wave Diathermy 1 1000 W pulsed and 400 W continuous maximum power output.
Pulsed and continuous shortwave from one unit
(SSTH-1) Programmable memories
Capacitive, inductive disk or plate applicators
(CIF BASIS) Automatic tuning
Easy-to-read indications on large and high visibility
LCD screen
Technical Specifications:
Power supply: AC 100–240 V 50/60 Hz
Frequency: 27.12 MHz
Power consumption: 1 kVA max.
LCD display: 5” or more high visibility TFT/LCD Touch screen
Pulse frequency: 5, 10, 20, 30, 50, 80, 100, 200, 400, 600, 800Hz
Pulse width: 20, 40, 65, 100, 200, 400μs
Output power: 1000W
in Pulsed mode 400W
in Continuous mode
Timer: 0–30 min.
Standard accessories:
100 mm capacitive electrodes and cables, 2 pcs
Electrodes arms, 2pcs
Test tube
Power cord
User manual
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
86. Slide Folder 10 Slide Folder For Histopathology
WARRANTY 03 YEARS
(SSTH-1) Country of origin USA/EUROPE/JAPAN
(FOR BASIS)
87. Slit Lamp 1 SLIT LAMP BIOMICROSCOPE WITH DIGITAL IMAGING SYSTEM
Binocular tube with vertical type eye width adjustment.
(SSTH-1) Illumination LED or Halogen.
Eyepieces with dioptric adjustment 10X to 16X any one pair.
(FOR BASIS) Magnification range variable from 10x to 35x (5 steps or zoom).
Slit length: variable.
Tilt mechanism: 20o or better.
Slit image rotation: 0 to 180o.
Filters: Standard filters
With hanging type applanation tonometer. with extra prism and calibration kit
Including original digital camera with adapter.
PC for reporting: Core i5, 4GB RAM, 1TB hard disk or better, USB port. 19’ LCD
Chin-rest papers.
ACCESSORIES:
With original motorized table/Imported from Europe/Japan/USA.
Dust cover
Chin rest papers
Breath shield
UPS: Online sine wave compatible UPS with 20 minutes backup
Standard Accessories:
Ultrasound Probe L (5 CM2 1 & 3MHz)
Ultrasound gel (250ml)
Probe holder
Power supply cord
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
95. Ureterorenoscope 1 TECHNICAL SPECIFICATIONS
Clinical Purpose
(SSTH-1) URS is endoscopy of ureter and pelvis that is used to break the stones.
Urethrorenoscope, Autoclaveable, Semi Rigid
7-5Fr, Angle: 6 degree
(FOR BASIS) Working Length: 43cm
5, 2x6, 2Fr
Instrument Channel with lateral offset eye piece or Equivalent
Silicone automatic valve, ø 3.9 mm, 5 pieces / package
Rubber cap for instrument channel
Flexible cleaning brush for instrument channel
Grasping Forceps (Compatible with sets)
Biopsy Forceps (Compatible with sets)
2-3 prong forceps
Accessories:
Stone Cone / Basket
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
96. Ventilators 4 TRANSPORT VENTILATOR
(Portable) Microprocessor controlled ventilator with following minimum modes.
Continuous Mandatory Ventilator (CMV).
(SSTH-4) Synchronized intermittent Mandatory ventilation (SIMV)
Continuous positive airway pressure (CPAP)
(CIF BASIS) Pressure Support Ventilation
Non Invasive Ventilation
Tidal volume 100-2000ml
MONITORING DISPLAY:
Graphic Screen 12” screen or more.
Display parameters:- Airway pressure, Breath rate
Inspiratory time
Exhaled minute volume I:E ratio
Exhaled tidal volume
Trend Data.
Adjustable alarm for high/low respiratory rate.
Chargeable Built in battery backup, upto 4-6 hours and battery level indication.
12V-24V DC operations
Driving force turbine or better technology
Complete with breathing circuits, hose, test lung & universal masks or other
accessories required for proper functioning of the equipment.
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
97. Wax Bath Therapy 1 Heating water bath for paraffin or peat. The vessel with outlet: 1 x 2/3 – 200mm depth, with
Unit the lid 1 x 1/3 – 40mm depth.
Technical Specifications:
(SSTH-1) Tank Capacity: 25-30L
Peat packs operating temperature: 40 - 45 °C
(FOR BASIS) Paraffin pirating temperature:56 - 58°C
Paraffin sterilizing temperature: ± 80 °C
Temperature adjustment range: 0 - 90 °C
Protection against electrical accident: Class I
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
98. WRO System for 24 1 WRO SYSTEM
Dialysis Machines WRO Water Purification System
Meets the highest industry standard (AAMI) for pure water of AAMI or greater of
(SSTH-1) quality for Water to Dialysis Machines and Renal Patients for improvement in quality
of life with highest innovation.
(FOR BASIS) Configuration
RO Water Purification System to operate 24 Dialysis Machines
Direct feed to Dialysis Machines through UV sterilizer
Mounted on SS305 SKID (corrosion proof)
RO internal Plumbing HDPVC Schedule 80
Product & Reject Flow Meters
Product & Reject ONLINE TDS / Conductivity Meter
Manual Operation in Case Electrical Control Panel Failure
Includes Pre Treatment
a. Cartridge Filter Size
b. Feed Booster Pump 220 VAC,
c. Multimedia Filter
d. ACF Chlorine (KDF) Filtration
e. Water Softener
f. UV Sterilizer
g. Imported
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
99. X-Ray Machine 1 MOBILE X-RAY UNIT
300 MA Mobile Mobile Microprocessor based X-Ray Unit.
High frequency, 30KW X-Ray Generator.
(SSTH-1) 300 mA at 100 kv.
Digital display of all set parameters.
(CIF BASIS) Rotating anode x-ray tube, with dual focus / Single Focus
Anode heat storage capacity of at least 107 KHU or more
Electronic timer with exposure time of 1-3 msec.
Automatic over-load protection device and automatic line compensation.
The unit should be battery supported for exposure and movement (Motorized).
220 V, 50 Hz.
Accessories
Lead apron adult 01
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
100. X-Ray Scanner with 1 Digital Imaging System (Photostimulable Phosphor)
LCD for Dental Operation under normal light conditions
(Complete system) 16-bit or better
High image quality with effective resolution 14-22LP/mm or better
(SSTH-1) Rapid image availability within 7-8 sec
Image read out, erase and make ready for the next use in one step
(CIF BASIS) Standby function
Compact design place able in the direct vicinity of chair
PC interface via USB and Network
(FOR BASIS)
105. Platelet Incubator with 1 PLATELET INCUBATOR WITH AGITATOR
Agitator (20 Bags Detailed Requirement:
Capacity) Internal made of stainless steel
Dual Pane, Tempered glass door
(KLP- 01) Bacteria resistant
Forced air circulation
(FOR BASIS) Key Lock
RS 232 or USB Interface
220V 50 Hz, AC
User Adjustable Settings:
20-30 Bags Storage
Continuous control of temperature
Displayed Parameters:
Digital display for temperature
Motion Failure Alarms
Accessories:
Complete with standard and operation accessories;
Chart Recorder
Operating Manual with a Soft Copy
Service Manual with a Soft Copy
With UPS sine wave dry battery with 30 mint backup
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
106. Blood Bag Sealer 1 TECHNICAL SPECIFICATIONS
Detailed Requirement:
(KLP-01) For electric handling and processing of blood bags in the blood donor area for 5 mm tubes
Microprocessor controlled high frequency generator unit
Adjustable sealing time up to 5 sec or less
(FOR BASIS) Rechargeable battery operated unit with charging unit
Hand held sealer with 2 meter cable
220V 50 Hz, AC
User Adjustable Settings:
Battery backup for 500 sealing
Displayed Parameters:
Digital Display of Temperature, No. of Sealing etc
Over temperature alarms
Accessories:
Complete with standard and operation accessories;
Operating Manual with a Soft Copy
Service Manual with a Soft Copy
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
107. Freezer for FFPS (- 1 TECHNICAL SPECIFICATIONS
20c-50c) / Plasma Detailed Requirement:
Storage Freezer (80- Stainless Steel Interior
120 Bags 450ml) Automatic defrost (hot gas)
Automatic closing of the door
(KLP-01) Controlled fan cooling
Key operated power switch
(FOR BASIS) Safety door lock
Interior doors to minimize loss of refrigeration
Integrated RS-485/USB interface
220V 50 Hz, AC
User Adjustable Settings:
Temperature range down to -40¢XC
Gross volume of 8 cu. ft or more
Net capacity : minimum 80-120 plasma bags of 450ml
200-250 min hold over time at +25 C ambient temperature
Displayed Parameters:
Digital temperature display
Acoustical and visual alarm for temperature and power failure
Alarm system with battery backup
Door opening alarm
Accessories:
Complete with standard and operation accessories;
Servo Controlled Voltage Stabilizer with surge protection facility
Operating Manual with a Soft Copy
Service Manual with a Soft Copy
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
108. Centrifuge Machine 2 TECHNICAL SPECIFICATIONS
Detailed Requirement:
(KLP-02) Bench top centrifuge machine with angle rotor
Built in speedometer, variable speed control, lid locking and braking device
(FOR BASIS) Maintenance free motor
Lid safety interlock
Noiseless and vibration free
220V 50 Hz, AC
User Adjustable Settings:
Speed 4500–5000 rpm.
Maximum capacity 8 x 15ml
Digital control of Timing up to 60min
Displayed Parameters:
Digital display of speed, timing
Rotor Imbalance detection
Accessories:
Complete with standard and operation accessories
Servo Controlled Voltage Stabilizer with surge protection facility
Operating Manual with a Soft Copy
Service Manual with a Soft Copy
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
109. Blood Bag Shaker 3 TECHNICAL SPECIFICATIONS
(Digital) Detailed Requirement:
Accept all major brands of bag available in the local market
(KLP-03) Mixing of blood bags
LCD/LED Display of parameters
(FOR BASIS) Self Calibration
Measuring and shaking of blood bags
Battery operated
User Adjustable Settings:
Weight range 1-999 gr/ml
Displayed Parameters:
Accuracy +/- 2 %
Error Indication
Accessories:
With all Standard Accessories
Optional:
Bi-directional communication
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
110. Serocentrifuge 1 TECHNICAL SPECIFICATIONS
Machine Detailed Requirement:
Bench top centrifuge machine with angle rotor
(KLP-01) Built in speedometer, variable speed control, lid locking and braking device
Maintenance free motor
(FOR BASIS) Lid safety interlock
Noiseless and vibration free
220V 50 Hz, AC
User Adjustable Settings:
Speed 4500–5000 rpm.
Maximum capacity 12 x 15ml
Digital control of Timing up to 60min
Displayed Parameters:
Digital display of speed, timing
Rotor Imbalance detection
Accessories:
Complete with standard and operation accessories
Servo Controlled Voltage Stabilizer with surge protection facility
Operating Manual with a Soft Copy
Service Manual with a Soft Copy
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
111. Water Bath 1 TECHNICAL SPECIFICATIONS
Detailed Requirement:
(KLP-01) Microprocessor PID-temperature controller
Exterior body of steel sheet
(FOR BASIS) Double skinned tank, inner case made of stainless steel
Perforated stainless steel bottom tray
Temperature control for regulation of temperature
Gabled lid
Power Source 220V, 50HZ AC
User Adjustable Settings:
Capacity of 20-25 Liters
Adjustable temperature range from +5C above ambient up to 100C
Temperature accuracy of + 1%
Displayed Parameters:
Built in thermometer
Digital display of temperature and time
Adjustable timer for time setting
Fault indication system
Over temperature protection system
Accessories:
Three Racks of different sizes
Servo Controlled Voltage Stabilizer with surge protection facility
With drain tap
Operating Manual with a Soft Copy
Service Manual with a Soft Copy
WARRANTY 03 YEARS
Country of origin USA/EUROPE/JAPAN
TOTAL
*Note: Optional Accessories will not Included in financial bid / comparative statement.