Professional Documents
Culture Documents
Support
SAP Extractor: resending a Delta job
Article Number:000025035 | Last Updated:05/10/2016
Did this article help solve your issue?
Yes No
Description
One big advantage of using Qlik SAP Extractor connector is the use of delta capability.
But when running both full and/or delta load, a communication error may occur thus requires an IDocs to be resent to Qlikview (see here).
This will not be possible when using tRFC transfer method.
Resolution
If there is a need to resend a Delta job, the IDoc transfer method MUST be used as the tRFC transfer method does not keep track of the data in SAP.
But when using IDoc transfer method, we need to be aware of below :
*The disadvantage of IDoc is that jobs cannot execute in parallel and the row width is limited to 1000 characters. Note that IDoc method jobs can be executed
in parallel if ONLY different logical systems are used for each job.
* The INITRNR is the same as "job name" and begins with REQU_ .
Example from log file:
20160922 10:50:11 Information from server: INFOMSG : Started job: REQU_QTQVCEXTRx_xxxxxxxxxxxxxx
* For the targeted extractor: if the tRFC transfer method is activated, it first needs to be deactivated and then the IDoc transfer method can be activated.
Trademarks | Cookie & Privacy Policy | Terms of Use | License Terms
https://qliksupport.force.com/QS_CaseWizardKnowledgeArticle?id=ka5D00000004Nx6IAE 1/2
3/22/2017 Qlik Support
Copyright © 19932016 QlikTech International AB, All Rights Reserved.
https://qliksupport.force.com/QS_CaseWizardKnowledgeArticle?id=ka5D00000004Nx6IAE 2/2