BIRLA INSTITUTE OF TECHNOLOGY AND SCIENCE, Pilani
Pilani Campus
Instruction Division
‘SECOND SEMESTER 2020-2021.
Course Handout Part II
Date: 15/01/2021
In addition to part 4 (General Handout for all courses appended to the time table) this portion
gives further specific details regarding the course.
LpTu 12012
Course No. ME F218
Course Title : Advanced Mechanics of Solids
Instructor-in-charge_: Prof. M. S. DASGUPTA
Tutorial Instructors: 1 S Rathore, Gaurav Watts, Venkatesh Kadbur Prabhakar Rao
1. Course Desi The course starts with generalized Hooke’s law and three dimensional stress
strain relations putting emphasis on Materials-Mechanics linkage to elucidate mechanical properties of
materials. It also includes Energy methods; Torsion of non-circular members; Shear center and
Asymmetrical bending of beams; Curved beams; Thick cylinders.
2. Scope and Objective of the Course: The course deals with in-depth analysis of some advanced
topics in Mechanics of Solids, necessary for Mechanical Engineering students, beyond what is
covered in the common course Mechanics of Solids.
3. Text books:
Ti: “Advanced Mechanics of Materials" - Arthur P., Boresi and R.J. Schinid, John Wiley, 6" Edition.
Reference books:
Ri: “Advanced Mechanics & Solids” - LS. Srinath, Tata Mc.Graw-Hill Publishing Co. 2™4 Edition, 2003
R2: “Advanced Mechanics of Solids” — Otto T. Bruhns, Springer Verlag, 2003
R3: “Advanced Mechanics of Materials” — R. Davis Cook and Warren C. Young, Prentice Hall 2"4 Edition,
1998,
4, Lecture Plan:
Module Lecture Session Chap/Sec_] Learning Outcome
& (Book)
Tutorial Session
lass
Please Do Not Print Unless NecessaryBIRLA INSTITUTE OF TECHNOLOGY AND SCIENCE, Pilani
Pilani Campus
Instruction Division
1 [Review of elementary] Introduction & review of | CH1 (TB1) | Quick revi
Mechanics of Materials | elementary mechanics of Important
and — methods —of | solids, methods of analysis, Concepts in
analysis, failure analysis | failures in design. First level course on
& properties of material |g Engg.
mechanics
2-4 [Energy methods and | Principle of stationary potential [ cH5 (181) ty to identify,
applic energy, Castigliano’s theorem, formulate and solve
Deflections in _ statically variety problems of
determinate structures and statics using energy
statically indeterminate method
structures, applications to
curved beam treated as straight
beams.
Tutorial 2
5- [Theories of stress and | Stress at a point, stress on an] cH2 (TB1) | Comprehend nuance
9 | strain arbitrarily oriented plane, of continuum|
transformation of _ stress, mechanics, its
principal stresses, differential implications and
equations of motion of a numerical problem|
deformable body, deformation, solving,
strain theory, small
displacement theory
Tutorial 3 & 4
10-|Linear stress strain | Generalized Hooke’s Law, | cua (Bi) |Computing stress
12 | temperature relations. | anisotropic and __ isotropic and strain for
elasticity, thermoelasticity for
isotropic materials, Hook’s law
for orthotropic material
Tutorial 5
anisotropic material
Please Do Not Print Unless Necessary
a
ovate achieveBIRLA INSTITUTE OF TECHNOLOGY AND SCIENCE, Pilani
Pilani Campus
Instruction Division
13-] Torsion of non-circular Jforsion of prismatic bar, Saint [CH 6.1/Formulation ani
17 | member /enant’s Semi-inverse method, | 6.6(TB1) solution of stress
linear elastic solutions, Prandtle arising out of torsion
lelastic membrane analogy in a general
structural member.
[Tutorial 6
18- | Asymmetrical bending [Non-symmetrical loading, | CH7.1- [Formulation andl
21 bending and deflection of | 7.3(T81) |solution of stress
btraight beams arising out oo
. bending in a general
Tutorial 7 structural member.
22-| Shear Center for thin) Shear flow in thin-walled beam |CH 8.11 Appreciate the|
23 |walled beam _cross| cross sections, Shear Center for | 8.3(TB1) |concept of shear
channel section. center computation]
of same.
Tutorial 8
24- | Curved beams Location of neutral axis, radial | CH9.1-9.6 | Appreciate the|
25 stress, correction off (TB1) | concept and
circumferential stress andi compute —_bendin
deflections of curved beams stress in a beam with
Tutorial 9 nite radius oo
curvature.
Save Paper.
Save Trees.
°° \Save the World. oo
Please Do Not Print Unless NecessaryBIRLA INSTITUTE OF TECHNOLOGY AND SCIENCE, Pilani
Pilani Campus
Instruction Division
_ Evaluation Scheme :
- Weightage | Duration -
Evaluation Component 7 mie Date of Evaluation
Mid Semester Test 30 60
Tutorial Evenly spaced throughout the
40 semester
Comprehensive
Cee 40 120 {As announced in the Timetable
Examination
+ Tutorials will be utilized for numerical problem solving under guidance of tutorial instructor
and the same will be evaluated. Best four performances out of evaluated ones for each
student will be counted for aggregate marks.
Chamber Consult
Notices: If any, will be displayed in Nalanda.
n Hour: To be announced in the class.
Make-up policy: No makeup is allowed for Tutorials.
WA. secre
. Save Trees.
4 °* Save the World.
Instructor-in-charge
ME F218