Professional Documents
Culture Documents
Blowtorches/ Gas Heaters/ Dehumidifiers Outdoor Utility Points Regulators Hose & Fittings Beacons, Event Torches Tank Fittings Extras Refrig/ Oil Spares Account
Torch Kits Blow torches and burners for a wide variety of industries
FirePower
In this section any of the Standard burners (those without /01), extension tubes, and multiple burner adaptors can be tted to
Standard Blowtorches any of the blow torch handles nos 1185, 1185/01, 1245 and 1340. The connections all have 1" x 26 tpi whit form threads.
SafeFlame Hydrogen Torch
(Note that Handle 1185/02 has a di erent burner connection and this goes with Burners 1230/01, 1470/01, 1472/01, 1473/01 -
Autotorch 2300
these burners cannot be tted to the other Torch handles - the connections all have 9/16" x 26 tpi whit form threads).
Autotorch Sys 2
Autotorch Brazing Sys The Extended torch handle 1345 can take any of the burners and the multiple burner adaptors.
Autotorch for Acetylene
New LPG Poker just introduced for the fast lighting barbecues, hog-roasts and outdoor res. No 609 and 6095
Gas Poker
Performers Kiln - see Uses of Torches below for a suggested layout for a burner in a kiln or oven.
Gas
Pressure Equipment Regulations 2016 These torches conform to these regulations.
Pre-Mixed Burners & Torches
Leak detector/lighter
More Information
Heaters/ Dehumidi ers
Regulators
Extension tube -
Tank Fittings Fishtail attachment Burner adaptor Extended torch handle
1020mm (40in) long
Extras (exc VAT) £8.17 (exc VAT) £3.88 (exc VAT) £53.19 (exc VAT) £26.98
no.1474 no.1073 no.1345 no.1140
Refrig/ Oil
Spares
Account
(exc VAT) £16.62 (exc VAT) £20.23 (exc VAT) £3.65 (exc VAT) £3.95
no.1112 no.1124 no.250 no.550
Single headed
Standard burner Standard burner Standard burner
extended torch kit
(exc VAT) £110.12 (exc VAT) £13.30 (exc VAT) £13.64 (exc VAT) £14.21
no.137/01 no.1210 no.1220 no.1230
(exc VAT) £16.60 (exc VAT) £16.89 (exc VAT) £19.76 (exc VAT) £22.29
no.1240 no.1250 no.1260 no.1270
Standard Torch Kit Standard torch kit Trident burner adaptor Triple Flint Igniter
(exc VAT) £64.66 (exc VAT) £69.91 (exc VAT) £44.42 (exc VAT) £3.10
no.110P no.140P no.1123 no.7100
Use of Torches
Bitumastic work
Roof laying
Torch-on roo ng
Weed burning
Large pipe work - e.g. weld pre-heating
Maintenance
Jewellery
Refrigeration
Steam ttings installation
Model engineering
Heating and ventilating
Agricultural machinery maintenance
General engineering repair
Appliance repair
Lighting barbecues
Lighting braziers, coal and coke res
Technoweld aluminium brazing
Kilns
Bull nch standard burners can be used for providing the burners for kilns. Most kilns have di erent requirements and so it is
hard to give speci c advice. We do have an informal information sheet on how our burners may be set up for a Kiln
suggested layout - click here. It is important to remember that the burners do require space round them to allow air to be
drawn in for combustion at the front and the back of the burners.
Flame Temperatures
Acetylene-air and MAP//Pro gas-air will give ame temperatures 200-300oC above this and component temperatures 200-
300oC higher too.
The Autotorch brazing burners can give temperatures up to 950oC under general conditions and up to 1200oC in ideal
conditions only. They can therefore bronze braze under most conditions as well as being able to make faster soft and silver
soldered joints. They are particularly good for hard/silver soldering of copper pipes.
Back to Top
Blowtorches & Gas Beacons & Lighting The Company T: 0121 765 2000
Copyright © 2019 Bull nch Gas Equipment Ltd - Diadem Works, Kings Road, Tyseley, Birmingham B11 2AJ, England - Reg No 635802