Professional Documents
Culture Documents
P1000P1/P1100E1: Output Ratings
P1000P1/P1100E1: Output Ratings
www.FGWilson.com
Output Ratings
220/127V, 60 Hz - -
- -
Technical Data
Engine Make & Model: Perkins 4008TAG2A
Frequency: 50 Hz 60 Hz
Standby Level: dB 10 -
Max. Allowable Back
50 Hz 241.5 (63.8) 173.5 (45.8) 118.0 (31.2)
Pressure: kPa (in. Hg) 8.0 (2.4) -
60 Hz - - -
Exhaust Gas Flow:
(based on diesel fuel with a specific gravity of 0.85 and conforming to m³/min (cfm) -Standby: 200.0 (7063) -
BS2869, Class A2) -Prime: 200.0 (7063) -
Exhaust Gas Temperature: °C (°F)
-Standby: 465 (869) -
-Prime: 438 (820) -
2
P1000P1 / P1100E1
Motor Starting
Capability* kVA 2469 2301 2085
Short Circuit
Capacity** % 300 300 300
Reactances:
Per Unit
3
P1000P1 / P1100E1
Technical Data
3 Phase Ratings and Performance at 50 Hz, 1500 RPM 3 Phase Ratings and Performance at 60 Hz, - RPM
Definitions
Standby Rating Prime Rating Standard Reference Conditions
These ratings are applicable for supplying These ratings are applicable for supplying Note: Standard reference conditions 25°C
continuous electrical power (at variable load) continuous electrical power (at variable load) (77°F) Air Inlet Temp, 100m (328ft) A.S.L.
in the event of a utility power failure. No in lieu of commercially purchased power. 30% relative humidity. Fuel consumption data
overload is permitted on these ratings. The There is no limitation to the annual hours of at full load with diesel fuel with specific gravity
alternator on this model is peak continuous operation and this model can supply 10% of 0.85 and conforming to BS2869: 1998,
rated (as defined in ISO 8528-3). overload power for 1 hour in 12 hours. Class A2.
General Data
Documents Generating Set Standards Warranty
A full set of operation and maintenance The equipment meets the following standards: All equipment carries full manufacturer's
manuals and circuit wiring diagrams. BS5000, ISO 8528, ISO 3046, IEC 60034, warranty. Extended warranty terms available.
NEMA MG-1.22. For details on warranty cover please contact
your local dealer, or visit our website:
FG Wilson is a fully accredited ISO 9001 www.FGWilson.com
company.
In line with our policy of continuous product development, we reserve the right to change specification without notice. P1000P1 / P1100E1/4PP/0309/GB