Professional Documents
Culture Documents
BushmanC Hook Bail Dimensions
BushmanC Hook Bail Dimensions
3 7 13/4 11/4
WIDTH
SAFETY
INSTRU
_______ CTION
______________
_______ _____
11/4
_______ _______ ___
3 8 2
_____________
_________
10 MHI
1
3 /2 9 3
2 /4 1
1 /2
Tapered Lower Carrying Arm — facilitates entry into coil ID.
15 WARNING
20 5 12 3 2 Beveled Top Edge On Carrying Arms — standard on hooks under 20,000 lb. capacity.
25 51/2 14 31/4 2
Curved Coil Support Saddles — standard on hooks 20,000 lb. capacity and greater. SAFETY
Use stand.
G 8 31 31/2 77
A 11/2 12 31 33/4 137
B 16 31 41/4 178
D A
To ensure optimum C-hook performance, please 8 31 31/2 100
provide the following important dimensional data H 2 12 31 41/4 143
(max./min.) for coil OD and ID and overall load 16 31 43/4 185
Please complete the chart below to assure proper fit
length. between your C-hook bail and crane hook. 8 32 41/4 113
L
3 12 32 41/2 185
A max. ______" B min. ______" 16 32 5 236
Hook cap. _____________ tons D _____" H _____"
C 12 32 5 196
A min. ______" C max. ______" Manufacturer ______________ E _____" K _____" 4 16 321/2 51/4 360
20 321/2 6 420
B max. ______" C min. ______" F _____" L _____" 12 33 51/4 295
The model 610 C-hook is similar in construction 5 16 33 6 380
G _____" to the model 624 (shown on following page). 20 33 61/2 455
Max. weight _______ tons, or The lifting bail is turned 90° and burned from 12 331/2 53/4 314
the same piece of plate as the hook, making it 6 16 34 61/2 392
_______ metric tons, or an integral part of the hook. The standard “H” 20 34 7 478
dimension on the model 610 is 20”. For 12 351/2 61/2 348
_______ lb.
variations in any dimension, please consult 71/2 16 36 7 428
the factory with your application. 20 36 7 700
Because of ongoing product modification and improvement, the data in this brochure is subject to change without notice.
Note: B dimension is equal to 1/2 the width of the widest coil plus 1/2”.
© 1996 Bushman Equipment, Inc.
E Q U I P M E N T , I N C .®
P.O. Box 309 • Butler, WI 53007-0309 Bulletin CH 03 E Q U I P M E N T , I N C .®
262-790-4200 • Fax 262-790-4202 262-790-4200 • Fax 262-790-4202
E-Mail: custinfo@bushman.com • www.bushman.com E-Mail: custinfo@bushman.com • www.bushman.com
MODEL 624 C-HOOK MAX LIFTING MODEL 624-SL C-HOOK
COIL CLEAR HEAD- ARM UNIT
CAPACITY WIDTH HEIGHT ROOM HEIGHT WEIGHT
(TONS) L H A C (LB.)
MAX. LIFTING MIN. LIFTING
36 20 351/2 71/2 775 COIL ARM COIL CLEAR HEAD ARM UNIT
36 24 391/2 71/2 825 CAPACITY WIDTH LENGTH WIDTH HEIGHT ROOM HEIGHT WEIGHT
48 20 361/2 81/2 940 (TONS) W1 L W2 H A C (LB.)
5 48 24 401/2 91/2 990
60 20 371/2 91/2 1170 A 48 39 30 24 411/2 81/2 1150
60 24 411/2 91/2 1225 B 48 39 30 30 471/2 81/2 1250
B A W1
36 20 37 9 940 60 48 36 24 41 8 1600
36 24 41 9 1000 H 10 60 48 36 30 47 8
H L 1700
L 48 20 38 10 1180 72 57 42 24 42 9 2000
71/2 48 24 42 10 1250 W2 72 57 42 30 48 9 2100
60 20 38 10 1575 48 39 30 24 431/2 91/2 1500
60 24 42 10 1660 C 48 39 30 30 491/2 91/2 1700
C
36 24 43 10 1235 60 48 36 24 44 10 2100
36 30 49 10 1355 15 60 48 36 30 50 10 2200
48 24 431/2 101/2 1630 72 57 42 24 44 10 2600
48 30 491/2 101/2 1780 72 57 42 30 50 10 2800
10
60 24 44 11 1660 48 39 30 24 471/2 101/2 1900
This model coil hook has a lower member length 60 30 50 11 1780 Designed for close stacking by 48 39 30 30 531/2 101/2 2100
(“L” dimension) which equals the maximum coil 72 24 44 11 2010 shortening the distance from pick-up 60 48 36 24 471/2 101/2 2400
72 30 50 11 2130
point (center of gravity) to the end of 20 60 48 36 30 531/2 101/2 2700
width. The full length support feature increases the
48 24 431/2 91/2 1185 hook. Short lifting arm permits handling 72 57 42 24 481/2 111/2 2900
amount of surface area in contact with the coil, 48 30 491/2 91/2 1275 72 57 42 30 541/2 111/2 3100
minimizing the potential for damage to the inner all coil widths within operating range
60 24 44 10 1360 60 48 36 24 52 111/2 2400
wraps of lighter gauge coil stock. 15 60 30 50 10 1450 (widest to narrowest) without the lifting 60 48 36 30 58 111/2 2900
72 24 44 10 1835 arm extending beyond outer edge of coil. 25 72 57 42 24 52 111/2 3500
For capacities and dimensions not shown, please 72 30 50 10 1945 The reduced overall width of this style 72 57 42 30 58 111/2 3800
consult factory. 48 30 531/2 101/2 1475 lifter can help decrease aisle space 60 48 36 30 601/2 111/2 3900
48 36 591/2 101/2 1575 requirements, increasing storage 30 72 57 42 30 61 12 4100
60 24 471/2 101/2 1840 72 57 42 36 67 12 4400
20 capacity.
60 30 531/2 101/2 1965 35 72 64 56 30 64 13 4300
72 24 481/2 111/2 2200 72 64 56 36 70 13 4750
72 30 541/2 111/2 2330 For capacities and dimensions not
40 72 64 56 36 701/2 131/2 5400
60 30 561/2 111/2 2245
shown, please consult factory.
60 36 621/2 111/2 2335 Note: “B” dimension is equal to 1/2 the width of the widest coil plus 1/2”.
25 72 30 1
56 /2 1
11 /2 2815
72 36 621/2 111/2 2975
60 30 591/2 111/2 2790
30 72 30 60 12 3555
72 36 66 12 3760
Note: “B” dimension is 60 36 68 111/2 3525
equal to 1/2 the width of 35 72 30 631/2 13 3930
the widest coil plus 1/2”. 72 36 691/2 13 4150
40 72 36 691/2 131/2 4830
Bushman Equipment recommends the use of a parking All Bushman C-hook equipment is designed to meet or
stand for all C-hooks when not in use. See page 4 for exceed the requirements of ASME-ANSI Standard B30.20.
details.
E Q U I P M E N T , I N C .®
262-790-4200 • Fax 262-790-4202
E-Mail: custinfo@bushman.com • www.bushman.com