Professional Documents
Culture Documents
Torq Syncrosnap Centrifugals - 60 Hertz: Sorted by Motor Manufacturer
Torq Syncrosnap Centrifugals - 60 Hertz: Sorted by Motor Manufacturer
BACKPLATE SPOOL
NOTES FIGURE REPLACEMENT FOR TORQ
POLES
MANUFACTURER
BORE CATALOG
BORE OD OD ID PART NUMBER
+.000 NUMBER
CODE
-.003
LTR.
BALDOR
.496 C 2 A RS9007A C-1001
.496 C
4 A RS9007A C-1002
NOTES: Baldor motors use a variety of switch configurations which include switches manufactured by Torq
Corporation and switches manufactured by Baldor. Careful attention must be paid to the combination used
in the motor to be repaired as this affects the way the motor operates. A Torq Centrifugal will operate at a
different speed with a Torq Stationary than it will with a Baldor Stationary.
(3) Use ONLY with Torq stationary switch and NOT with Baldor stationary.
(4) Use ONLY with Baldor stationary switch and NOT with Torq stationary.
BALDOR
.794 AB 2.61 2 2.25 1.13 (4) A RS9001A26 C-2190
NOTES: Baldor motors use a variety of switch configurations which include switches manufactured by
Torq Corporation and switches manufactured by Baldor. Careful attention must be paid to the combination
used in the motor to be repaired as this affects the way the motor operates. A Torq Centrifugal will
operate at a different speed with a Torq Stationary than it will with a Baldor Stationary.
(1) For 50/60 Hertz
(2) Early model centrifugals were made with an .812" I.D. and stamped AJ@.
(3) Use ONLY with Torq stationary switch and NOT with Baldor stationary.
(4) Use ONLY with Baldor stationary switch and NOT with Torq stationary.
PAGE 4.04B
®
TORQ SYNCROSNAP CENTRIFUGALS - 60 HERTZ
®
BALDOR
1.118 BC 3.56 2 1.75 A RS9000A19 C-3175
NOTES: Baldor motors use a variety of switch configurations which include switches manufactured by
Torq Corporation and switches manufactured by Baldor. Careful attention must be paid to the combination
used in the motor to be repaired as this affects the way the motor operates. A Torq Centrifugal will
operate at a different speed with a Torq Stationary than it will with a Baldor Stationary.
(1) For 50/60 Hertz
(2) Early model centrifugals were made with an .812" I.D. and stamped AJ@.
(3) Use ONLY with Torq stationary switch and NOT with Baldor stationary.
(4) Use ONLY with Baldor stationary switch and NOT with Torq stationary.
PAGE 4.04C