Professional Documents
Culture Documents
STEAM TURBINES
POWER AND PERFORMANCE
Over the last 100 years, GE has delivered more than 1.2 TW of power production
capability totaling over 41 percent of the world’s installed steam turbine base.
With unparalleled global experience in engineering, manufacturing, sourcing, and
services, we are delivering advanced technology steam turbine products to ensure
our customers are more profitable, successful and satisfied than ever before.
Solutions to Meet
Your Power Needs
GE’s steam turbine portfolio has the • Integral covered blades with continuous • Compact design with smaller wall
breadth and depth to help ensure that contacting surfaces provide excellent thickness provides flexible load
your specific site, operational, steam damping capability for superior cycling and faster startup times.
cycle, and application needs are met. We mechanical integrity. Family of High Efficiency
work with you from the earliest stages •N
ozzle design provides precise control Last Stage Blades
of your project, through construction, of radial clearances and throat areas to • We offer a comprehensive family of
commissioning, and operation to provide help ensure greater output and efficiency. last stage blades to meet your project’s
a highly efficient and cost effective specific conditions.
turbine that integrates smoothly with the Welded Rotors
— Up to 50 inch (1270 mm) for 60 Hz
gas turbine and overall plant operations. • With more than eight decades of
— Up to 60 inch (1524 mm) for 50 Hz
welded rotor experience, our designs
Experience, Strength are proven and reliable. • Robust mechanical design features
and Stability • Better access for ultrasonic testing enable high reliability.
A systematic and evolutionary platform equipment translates to higher reliability. • F eatures such as full tip shroud,
approach incorporates best practices enhanced tip section with low shock
Advanced Sealing Features
and technology improvements based on loss, aerodynamic part span connector,
• Shaft and tip brush seals, developed in
years of experience. Our best-in-class and increased root-reaction improve
conjunction with our global research
engineering and manufacturing centers steam turbine performance.
organization, improve leakage control
around the world enable us to provide when compared to more conventional • Advanced radial vortexing improves
an industry-leading portfolio of steam sealing technology. performance and hood integration
turbine products. over a range of loads.
• Abradable coatings on stationary
Advanced Technology seals enable the reduction of radial Self Synchronizing Clutch
clearances, decreasing long-term Reduces auxiliary startup steam demand
Features performance degradation. and enables the gas turbine to reach
High Efficiency Steam Paths 85 percent load in less than 20 minutes
• High reaction 3-D blade and nozzle Shrink Ring Design
• GE’s unique and proven shrink ring for hot start conditions.
airfoils are designed for high pressure
(HP), intermediate pressure (IP), and design reduces distortion, allowing LP Side Exhaust
low pressure (LP) steam conditions to critical clearances to be maintained Available for all D-series machines
achieve industry-leading performance. and sustaining performance over the and enables ground level condenser
life of the machine. connections, reduced centerline height,
BOP equipment to be located on one side
Combined Cycle Steam Turbines and lower plant construction costs.
PRODUCT
Up to Proven Validation Methods
GE ST-D650 43.6%
600 Series
Efficiency • GE thoroughly tests hardware to
REHEAT GE ST-D600
Up to
43.3% ensure every machine meets the
Up to 2,680 psi/185 bar
Up to 1,112°F/600°C
Efficiency
Up to
reliability and performance standards
GE ST-A650 42.7%
Efficiency
our customers demand.
400 Series GE ST-D400
Up to
41.5% • T he Low Pressure Development
REHEAT
Up to 1,800 psi/124 bar
Efficiency
Up to
Turbine, located in Schenectady,
Up to 1,112°F/600°C GE ST-A450 41.5%
Efficiency
NY, USA, is a key element out of our
Up to multiple test facilities. This test facility
GE ST-D200 39.1%
200 Series
NON-REHEAT
Efficiency uses steam to test our LP designs
Up to 2,030 psi/140 bar
GE ST-A200
Up to
37.9%
for both mechanical robustness and
Up to 1,050°F/565°C Efficiency
aerodynamic efficiency.
100 200 300 400 500 600 700
Output (MW)
gepower.com
REHEAT
suited for 50 Hz and 60 Hz H-class and F-class gas turbine power plants that have Output 150 MW–700 MW
high fuel costs and high annual Steam Turbine Efficiency Up to 43.6%
hours of operation. The single-shaft
configuration incorporates a clutch Built for Efficiency and Reliability
• Shared bearing design between sections reduces
for enhanced operational flexibility. construction time, increases power density and
The D650 turbine consists of enhances reliability by avoiding load shifts.
separate HP, IP, and either one or • HP, IP and valve units are shipped fully assembled.
two double-flow LP sections.
REHEAT
REHEAT
NON-REHEAT