The document discusses various machining processes including sawing with different saw types like hacksaws and band saws. It also discusses grinding processes and grinding wheels as well as drilling machines. Specific topics covered include reaming, threading, tapping, broaching, and calculating cutting speeds and feed rates. The document is presented by Ing. David Acosta Horn as part of a university course.
The document discusses various machining processes including sawing with different saw types like hacksaws and band saws. It also discusses grinding processes and grinding wheels as well as drilling machines. Specific topics covered include reaming, threading, tapping, broaching, and calculating cutting speeds and feed rates. The document is presented by Ing. David Acosta Horn as part of a university course.
The document discusses various machining processes including sawing with different saw types like hacksaws and band saws. It also discusses grinding processes and grinding wheels as well as drilling machines. Specific topics covered include reaming, threading, tapping, broaching, and calculating cutting speeds and feed rates. The document is presented by Ing. David Acosta Horn as part of a university course.
UNIVERSIDAD NACIONAL DE TRUJILLO POWER HACKSAWS The power hacksaw is very similar to the hand hacksaw. Cutting action is achieved by drawing a saw blade back and forth across a workpiece.
ING. DAVID ACOSTA HORNA - 2
UNIVERSIDAD NACIONAL DE TRUJILLO BAND SAWING MACHINES
ING. DAVID ACOSTA HORNA - 3
UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 4 UNIVERSIDAD NACIONAL DE TRUJILLO Blade Material Saw blades can be made of different types of materials. They are chosen according to the particular application and include factors such as material being cut, desired rate of cutting, and cost.
ING. DAVID ACOSTA HORNA - 5
UNIVERSIDAD NACIONAL DE TRUJILLO Tooth Set
ING. DAVID ACOSTA HORNA - 6
UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 7 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 8 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 9 UNIVERSIDAD NACIONAL DE TRUJILLO THE ABRASIVE CUTOFF SAW
ING. DAVID ACOSTA HORNA - 10
UNIVERSIDAD NACIONAL DE TRUJILLO Offhand Grinding
ING. DAVID ACOSTA HORNA - 11
UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 12 UNIVERSIDAD NACIONAL DE TRUJILLO GRINDING WHEELS Abrasive Type Grinding wheels are constructed with different abrasive types and are selected based on the types of materials they will be used for
ING. DAVID ACOSTA HORNA - 13
UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 14 UNIVERSIDAD NACIONAL DE TRUJILLO Wheel Grits (Abrasive Grain Size) Pedestal grinders are usually capable of holding two wheels, one on either end of the machine. Maximum Wheel Speed After the appropriate wheel dimensions have been selected, the next consideration is to make sure that the wheel can be safely used on the grinder.
Maximum Wheel Speed
After the appropriate wheel dimensions have been selected, the next consideration is to make sure that the wheel can be safely used on the grinder.
ING. DAVID ACOSTA HORNA - 15
UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 16 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 17 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 18 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 19 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 20 UNIVERSIDAD NACIONAL DE TRUJILLO Drilling, Threading, Tapping, and Reaming
ING. DAVID ACOSTA HORNA - 21
UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 22 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 23 UNIVERSIDAD NACIONAL DE TRUJILLO Counterboring, Countersinking, and Spotfacing
ING. DAVID ACOSTA HORNA - 24
UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 25 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 26 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 27 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 28 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 29 UNIVERSIDAD NACIONAL DE TRUJILLO THREADING AND TAPPING
ING. DAVID ACOSTA HORNA - 30
UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 31 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 32 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 33 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 34 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 35 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 36 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 37 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 38 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 39 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 40 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 41 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 42 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 43 UNIVERSIDAD NACIONAL DE TRUJILLO Drill Press
ING. DAVID ACOSTA HORNA - 44
UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 45 UNIVERSIDAD NACIONAL DE TRUJILLO UPRIGHT DRILL PRESS
ING. DAVID ACOSTA HORNA - 46
UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 47 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 48 UNIVERSIDAD NACIONAL DE TRUJILLO Gang Drill Press
ING. DAVID ACOSTA HORNA - 49
UNIVERSIDAD NACIONAL DE TRUJILLO RADIAL-ARM DRILL PRESS
ING. DAVID ACOSTA HORNA - 50
UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 51 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 52 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 53 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 54 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 55 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 56 UNIVERSIDAD NACIONAL DE TRUJILLO REAMERS
ING. DAVID ACOSTA HORNA - 57
UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 58 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 59 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 60 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 61 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 62 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 63 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 64 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 65 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 66 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 67 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 68 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 69 UNIVERSIDAD NACIONAL DE TRUJILLO Cutting Speed and RPM Calculation
ING. DAVID ACOSTA HORNA - 70
UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 71 UNIVERSIDAD NACIONAL DE TRUJILLO Feed Rates for Drill Press Operations Feed rates for drill press operations are specified in IPR (inches per revolution) or FPR (feed per revolution).
ING. DAVID ACOSTA HORNA - 72
UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 73 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 74 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 75 UNIVERSIDAD NACIONAL DE TRUJILLO SHARPER MACHINE
ING. DAVID ACOSTA HORNA - 76
UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 77 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 78 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 79 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 80 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 81 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 82 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 83 UNIVERSIDAD NACIONAL DE TRUJILLO VERTICAL SLOTTING MACHINE
ING. DAVID ACOSTA HORNA - 84
UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 85 UNIVERSIDAD NACIONAL DE TRUJILLO BROACHING
ING. DAVID ACOSTA HORNA - 86
UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 87 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 88 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 89 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 90 UNIVERSIDAD NACIONAL DE TRUJILLO ING. DAVID ACOSTA HORNA - 91 UNIVERSIDAD NACIONAL DE TRUJILLO THANKS