Professional Documents
Culture Documents
0810 Mech Mec801 Dms Sampleqb
0810 Mech Mec801 Dms Sampleqb
Q=QUESTION question_description
A=ANSWER answer_description
A rotating, engaged
A stationary, disengaged
A disengaged, stationary
Q In arithmetic progression, the difference between two adjacent speed steps is _________.
A constant
A low
A high
A varying
Q In geometric progression, the gear ratio between two consecutive speed ranges is _________.
A varying
A low
A high
A same
Q In harmonic progression, the diameter change between two consecutive speed ranges remains ________.
A constant
A low
A high
A varying
Q For a gear box, minimum & maximum speed is 28 rpm & 340 rpm. For 12 number of speed steps and the optimum
A velocity
1.361 for the cutting tool of 20 m/s, the geometric progression ratio will be……..
A 1.254
A 1.123
A 1.087
Q Which of the following structural formula will produce an open structural diagram.
A 2(6).3(2).2(1)
A 2(1).3(2).2(6)
A 2(3).3(1).2(6)
A 2(6).3(1).2(3)
Q Speed diagram is the graphical representation of different _____ of output shaft, motor shaft and intermediate shafts.
A sizes
A materials
A orientation
A speeds
Q ……….. indicates arrangement of various gears on various shafts of the gear box in order to obtain the different output
A speeds from the single speed of the motor.
Ray diagram
A Gear diagram
A Schematic diagram
A Structure diagram
Q Which of the following is the need of the gearbox?
A To vary the speed of the vehicle
A To vary the power of the vehicle
A To vary the acceleration of the vehicle
A To vary the torque of the vehicle