Professional Documents
Culture Documents
Cat Cc-4 Usa 04d105enm
Cat Cc-4 Usa 04d105enm
// Features
Recoverable formwork system for
solid and lightened slabs ensuring
high quality finish.
Hitting the wedge Turn of the wedge Drop of the wedge Drop of the formwork
2
CC-4 Aluminium Slab Formwork
Perfect for large slabs in building construction, with With the basic grid 2.32 m x 1.5 m, a prop rate of 0.29
regular geometry and spans between columns, and high props/m2 can be achieved.
demands for finishing quality.
Excellent concrete finishing: watertight joints
Consisting of Dropheads CC, Beams CC, Transversals CC between panels that inhibit concrete leaking.
TE and Panels CC; panels make up the biggest part of 1
the form face. 1 Transversal CC TE
2 Panels
Panel CC
Drophead CC
3
CC-4 Aluminium Slab Formwork
Great flexibility.
Transversal CC TR Board
Drophead CCT
Beam CC
4
CC-4 Aluminium Slab Formwork
// Benefits
Lightness: High assembly efficiency.
Remaining structure
5
CC-4 Aluminium Slab Formwork
Grid structure erection Several teams for the assembly of grids and panels can work at once
6
CC-4 Aluminium Slab Formwork
Safe dismantling
7
CC-4 Aluminium Slab Formwork
// Solutions
90º Assembly
90º assembly of beam on beam Easy assembly by sliding the panels into place
Infills at columns
8
CC-4 Aluminium Slab Formwork
Infills at walls with edge beam as infill plywood support Starting-from-a-wall with panel at the edge
9
CC-4 Aluminium Slab Formwork
Perimeter formwork
Perimeter protection
10
CC-4 Aluminium Slab Formwork
Basic components
kg
kg kg
Drophead CC 1870060 4.9 Beam CC 2.32 1870029 16 Edge beam 2.32 1870464 8.9
11
89
ULMA Form Works, Inc.
16-00 Route 208 South, Suite LL1
Fair Lawn, New Jersey 07410
Phone: (201) 882-1122
04D105ENM
info@ulmaconstruction.us
www.ulmaconstruction.us
IMPORTANT:
Any safety provisions as directed by the appropriate governing agencies must be observed when using our products. The pictures reserves the right to introduce any modifications deemed necessary for the technical development of the product.
in this document are snapshots of situations at different stages of assembly, and therefore are not complete images. For the All rights reserved. Neither all nor part of this document may be reproduced or transmitted in any way by any electronic or
purpose of safety, they should not be deemed as definitive. All of the indications regarding safety and operations contained in mechanical procedure, including photocopy, magnetic recording or any other form of information storage or retrieval system
this document, and the data on stress and loads should be respected. ULMA’s Technical Department must be consulted anytime without the written permission.
that field changes alter our equipment installation drawings. The loads featured in this document, related to the basic elements
of the product, are approximate. Our equipment is designed to work with accessories and elements made by our company only. © Copyright by ULMA C y E, S. Coop
Combining such equipment with other systems is not only dangerous but also voids any or all our warrantees. The company