Professional Documents
Culture Documents
SP5ELA Description. HSTNS-PL18 / Switching Power Supply Modification
SP5ELA Description. HSTNS-PL18 / Switching Power Supply Modification
Factory default output voltage is 12.0V, output max current 63A on main terminal. Modification for
“Ham Radio” voltage – 13.8V. Parts: R=5.1koHm, 0.125W (or 0.25W) resistor.
On board components:
1
Additional single connection from PCB micro trimmer potentiometer Pin 1 to pin 13 on board edge
connector.
2
Output terminals, back view.
*Other model - HP DPS-750RB A. Same parameters as HSTNS-PL18. Caution: PCB can be different in this
model.
**Note that a 100-300 Ohm resistor to connect pin 33 to 36 could be used for purpose (to switch PS ON
and OFF) rather than shorted wire (blue wire on photo above).
3
HSTNS-PL18 PCB with additional resistor for 13.8V output voltage. PCB Partial view.
As above, HSTNS-PL18 PCB with additional resistor for 13.8V output voltage. PCB location view.
4
** RMN: HSTNS-PL18 (Regulatory Model No.)
GPN: 506821-001 (Generic Part No.)
PN: 506822-201 (Part No.)
SPN: 511778-001 (Spare Part No.)