Professional Documents
Culture Documents
54q
Number: DES-4421
Passing Score: 800
Time Limit: 120 min
File Version: 1.0
DES-4421
Version 1.0
Exam A
QUESTION 1
A new administrator has just taken over an MX7000 Multi-Chassis Management Group and two-racks of
PowerEdge servers. The previous administrator no longer works at the company and is not available. No one
knows the password for the OME-M interface and the default password is not working.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.dell.com/support/manuals/us/en/04/poweredge-
mx7000/omem1.00.01_ug/recovering- passwords?guid=guid-553bf2dd-c491-4117-85f5-
c2fbfde4ef12&lang=en-us
QUESTION 2
A server sled has a single mezzanine card installed in the correctly supported slot.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Reference: https://i.dell.com/sites/csdocuments/Product_Docs/en/
dell_emc_poweredge_mx7000_technical_guide.pdf
QUESTION 3
When performing “A1 the Box” management, what must be done to successfully connect to the Management
Module?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 4
What is the number of server-facing ports and the bandwidth of each port on the MXG610s? (Choose two.)
A. 8x 16 Gbps
B. 16x 32 Gbps
C. 16x 16 Gbps
D. 8x 32 Gbps
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
Reference:
https://i.dell.com/sites/csdocuments/Product_Docs/en/
DellEMCNetworkingMXG610sSpecSheet.pdf (page 1)
QUESTION 5
What can be used as the firmware update source for OME-M within an MX chassis?
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://topics-cdn.dell.com/pdf/openmanage-enterprise-modular- v10001-
poweredge- mx7000_users-guide4_en-us.pdf
QUESTION 6
A company has several MX7000-systems, four FX2 solutions, one M1000e, and several PowerEdge rack
servers.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://i.dell.com/sites/csdocuments/Product_Docs/en/PowerEdge-Modular-Quick-
Reference- Guide.pdf
QUESTION 7
An administrator is about to perform a firmware update on an MX9116n switch OS 10 from the CLI. The latest
OS 10 switch firmware image has been downloaded and their TFTP server is set up.
Upon logged in with administrator credentials on the switch, which command should be used to start the
update procedure?
A. firmwaredownload tftp://server-ip/imagename
B. install tftp://server-ip/imagename
C. fwupdate tftp://server-ip/imagename
D. upgrade tftp://server-ip/imagename
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Reference: https://topics-cdn.dell.com/pdf/smartfabric-os10-5-0_en-us.pdf
QUESTION 8
DRAG DROP
A technician is deploying a new MX7000 chassis using the Chassis Deployment Wizard.
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 9
What is a characteristic of MX7000 networking in Scalable Fabric Mode?
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://hasanmansur.com/2019/01/10/mx7000-networking-part-2-operating-modes-iom-selection/
QUESTION 10
Which I/O module is supported for Fabric B?
A. MX5016s
B. MSG610s
C. MX5000s
D. MX5108n
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://hasanmansur.com/2019/01/08/mx7000-networking-part-1-introduction-components/
QUESTION 11
What is a valid option when resetting iDRAC to factory defaults?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.dell.com/support/manuals/us/en/04/poweredge-r740/i drac_3.21.21.21_ug/reset-idrac-
and-reset-idrac-to-default?guid=guid-1b5c2d57-05c8-4098-8344-4 9c984839c30&lang=en-us
QUESTION 12
What is a characteristic of MX7000 networking in Full Switch Mode?
A. Layer 2 bridging is disabled by default and interfaces must join a bridge domain (VLAN) before being able
to forward frames.
B. Networking is enabled by default and all switch-specific OS10EE capabilities are available.
C. Networking is available on MX9116n FSE and MX7116n FEM but not on the MX5108n.
D. Switches operate as layer 2 I/O aggregation devices and are managed through OME-M.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Reference: https://infohub.delltechnologies.com/l/test2-poweredge-mx-netw orking-architecture-guide-1/
operating-modes-description-7
QUESTION 13
In an MX7000, which components are cooled by the rear fans?
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: http://bladesmadesimple.com/2018/08/a-first-look-at-the-dell-emc-poweredge-mx/
QUESTION 14
DRAG DROP
A datacenter administrator has been tasked to perform firmware updates of the whole chassis and its
components based on the latest dell.com catalog.
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 15
The MDB chassis tub assembly vertical distribution board provides connectivity to which chassis components?
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Reference: https://i.dell.com/sites/csdocuments/Product_Docs/en/
dell_emc_poweredge_mx7000_technical_guide.pdf
QUESTION 16
Which controller option the mapping of an entire MX5016s to multiple compute sleds?
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.dell.com/support/manuals/us/en/04/poweredge-mx7000 /pemx5016s_mx5000s_ism/
initial-system-setup-and-configuration-for-mx5016s?guid=guid-f 5a47d05-b0f9-4573-aa98-
350a7e7a2c3c&lang=en-us
QUESTION 17
Which protocol(s) does Redfish use?
A. JSON and OData only
B. JSON only
C. JSON, OData, and SNMP
D. OData only
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.dell.com/support/article/us/en/04/sln310624/redfish?lang=en
QUESTION 18
An MX7000 administrator has been tasked to create a Scalable Fabric Architecture on a 3 chassis setup using
Fabric B.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 19
DRAG DROP
Section: (none)
Explanation
Explanation/Reference:
QUESTION 20
An MX7000 administrator has been tasked to perform the initial configuration of a new MX platform. The
MX700 has seven MX740c, one MX5016s, two Management Modules (MMs), an LED-Only control panel, two
MX9116n in Fabric A, two MX5108n in Fabric B, and two MX5000s in Fabric C.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://infohub.delltechnologies.com/static/media/client/7phuk h/d3df87a5-ddb7-4917-969d-
24e249b52824.pdf
QUESTION 21
After installing a supported OS from a bootable ISO on an MX740c sled, an administrator discovers that not all
the hardware is property detected by the OS. They plan to reinstall the OS.
A. Update the Dell OS Driver Pack and use the OS Deployment feature
B. Modify the bootable ISO to remove faulty drivers and boot directly from the bootable ISO
C. Modify the bootable ISO to remove faulty drivers and use the OS deployment feature
D. Update the Dell OS Driver Pack and boot directly from the bootable ISO
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 22
What is the benefit of C22 power inlet connectors on the MX7000 chassis?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://i.dell.com/sites/csdocuments/Product_Docs/en/
dell_emc_poweredge_mx7000_technical_guide.pdf
QUESTION 23
At the initial release of the MX7000 for a daisy-chained configuration in a multi-chassis management group
(MCM)m what is the maximum number of member chassis allowed, not counting the lead chassis?
A. 9
B. 10
C. 16
D. 20
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.dell.com/support/manuals/us/en/04/poweredge-
mx7000/omem1.00.01_ug/chassis- groups?guid=guid-967e1786-b148-45f6-8184-
c6a70296483a&lang=en-us
QUESTION 24
In the assigned mapping of the MX5016s storage sled what is an assignment option used for independent
storage to be mapped to a compute sled?
A. Drive-assigned enables the MX5016s to be split among multiple compute sleds. Each compute node only
“sees” the disks that are assigned to it and not the others.
B. Drive-assigned enables the MXG610s to the first eight drives in the MX5016s.
C. Enclosure-assigned enables the MX5016 to be split among multiple compute sleds. Each compute node
only “sees” the disks that are assigned to it and not the others.
D. Enclosure-assigned enables the MXG610s to the first eight drives in the MX5016s.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 25
Which MX7000 feature allows an administrator to virtualize network WWN and MAC addresses?
A. FlexAddress
B. MX Scalable Architecture
C. Identity Pool
D. Virtual Top of Rack
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://i.dell.com/sites/csdocuments/Product_Docs/en/
dell_emc_poweredge_mx7000_technical_guide.pdf (p.30)
QUESTION 26
When running an Open Networking operating system, which IOM functions are provided through OME-M?
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 27
What is a benefit of SmartFabric Services Mode?
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 28
Which I/O module(s) supports Full Switch and SmartFabric operating modes?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://infohub.delltechnologies.com/l/poweredge-mx-smartfabri c-configuration-
and- troubleshooting-guide-12/operating-modes-35
QUESTION 29
A company receives their first MX7000 chassis. They connect all the provided power supply cables into two
different PDUs on different power grids for redundancy. Each of the six power supplies is cabled and has
green LEDs. One Management Module is present along with all system fans. Grid redundancy is configured
as the power redundancy mode. The chassis is fully populated with six compute sleds and one IOM but only
two of the six sleds will power on.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://i.dell.com/sites/csdocuments/Product_Docs/en/
dell_emc_poweredge_mx7000_technical_guide.pdf
QUESTION 30
DRAG DROP
An administrator is using the OME-M GUI to change the hostname on an unconfigured I/O module inserted in
slot A1. They log on to the MX7000 chassis home page.
What is the correct order of steps the administrator should take to set the management IP address?
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 31
DRAG DROP
Match each feature with its associated PowerEdge server management tool.
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 32
What is a function of the Fabric Resources Director (FReD)?
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 33
While servicing an MX7000 chassis a system administrator logs into OME-M and receives a Chassis
Mismatch error.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://topics-cdn.dell.com/pdf/openmanage-enterprise-modular- v10001-
poweredge- mx7000_users-guide4_en-us.pdf
QUESTION 34
DRAG DROP
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.dell.com/support/manuals/us/en/04/poweredge-mx840c /pemx840c_ism/system-
board- jumpers-and-connectors?guid=guid-f36ac26a-7c24-49ee-a3d3-e2235 e9ea80a&lang=en-us
QUESTION 35
An administrator has been tasked with specifying hardware for a deployment having the following
requirements:
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 36
A technician replaces a failed Management Module in an MX7000 chassis group. After the technician leaves
the site, the administrator reports that the lead chassis is no longer able to communicate with its members.
Explanation/Reference:
QUESTION 37
A technician has replaced an MX chassis tub. They complete the tub installation and power on the chassis.
They notice that the KVM is no longer functional.
What should the technician do after confirming the KVM feature is still enabled in OME-M?
A. Ensure all cables connecting the tub to the left ear control panel are connected properly
B. Ensure all power supplies are connected and powered-on
C. Ensure all cables connecting the tub to the right ear control panel are connected properly
D. Ensure all installed Management Modules are connected to the network
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 38
An administrator is configuring a fully populated MX5016s storage sled to be accessed by four MX740c
compute sleds. Each compute sled has an H745P Jumbo PERC installed. The disks in the storage sled are
evenly distributed across all compute sleds using a Drive-Assigned storage configuration.
What is the maximum number of disks that each compute sled can detect from the MX5016s?
A. 1
B. 2
C. 4
D. 16
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.dell.com/en-us/work/shop/povw/poweredge-mx5016s
QUESTION 39
Refer to the exhibit.
How many internal server-facing ports are available on this I/O module for the MX7000 chassis?
A. 2
B. 8
C. 16
D. 24
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://i.dell.com/sites/csdocuments/Product_Docs/en/
dell_emc_poweredge_mx7000_technical_guide.pdf
QUESTION 40
What automatically opens a support case with technical support and collects the PowerEdge MX system state
information that is required for troubleshooting an issue, then sends it securely to Dell EMC?
A. OpenManage Essentials
B. SupportAssist Collections
C. OpenManage Enterprise
D. SupportAssist Enterprise
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 41
An administrator is asked to install and power-on a new MX740c sled in an MX7000 chassis. The
administrator inserts the sled and presses the power button. They notice that the power button LED is blinking
green. After a short time power button turns to solid green and the server finally turns on.
What operation was in progress when the power button was blinking green?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 42
Where is a valid storage location for extracting the full MX7000 chassis logs package?
A. VMFS
B. FTP
C. CIFS
D. CSV
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.dell.com/support/manuals/us/en/04/poweredge-mx7000 /omem1.00.01_ug/sas-
iom- overview?guid=guid-35fc46f8-41b1-4b9f-9aa9-037e400ec3f6&lang=e n-us
QUESTION 43
What configuration is supported for a fully populated MX740c compute sled?
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://i.dell.com/sites/csdocuments/Product_Docs/en/poweredge-mx740c-technical-guide.pdf?
newtab=true (p.9)
QUESTION 44
An administrator has installed the iDRAC Service Module in the OS on a compute sled, they are unable to use
its features in the iDRAC web GUI.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://cdn.cnetcontent.com/syndication/mediaserver/inlinecont ent/
all/0ec/190/0ec19016bfa8284323b12b2aa8d7a07c/original.pdf
QUESTION 45
What type of connection is used by QuickSync 2?
A. Bluetooth
B. NFC
C. QuickAssist
D. LTE
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.dell.com/support/manuals/us/en/04/openmanage-mobil e-
v2.0/omm20iosug/quick- sync-2?guid=guid-49ec3277-3696-4a65-a5cb-123f09f632fe&lang=en- us
QUESTION 46
The iSM is available under which license(s)?
A. OpenManage Enterprise-Modular
B. iDRAC Express and iDRAC Enterprise
C. iDRAC Enterprise only
D. iDRAC Express only
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 47
Where in the OME-M Web interface can the Chassis Deployment Wizard be found?
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://topics-cdn.dell.com/pdf/openmanage-enterprise-modular- v10001-
poweredge- mx7000_users-guide4_en-us.pdf (15)
QUESTION 48
An administrator is connecting two MX840c to an MX5016s. The MX5016s is configured in Enclosure
Assigned mode.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://i.dell.com/sites/csdocuments/Product_Docs/en/poweredge-mx5016s-mx5000s-
technical- guide.pdf (p.10)
QUESTION 49
Which feature requires an iDRAC Enterprise license for an MX sled?
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://i.dell.com/sites/csdocuments/Product_Docs/en/poweredge-mx740c-technical-guide.pdf?
newtab=true (p.9)
QUESTION 50
Refer to the exhibit.
What is shown?
A. MX5000s
B. MX5108n
C. MX5016s
D. MXG610s
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 51
What is the maximum possible weight of a fully populated MX7000 chassis?
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.dell.com/support/manuals/us/en/04/poweredge-
mx7000/pemx7000_ts_pub/chassis- weight?guid=guid-41294709-f48d-4174-846d-2fefc1483aef&lang=en-
us
QUESTION 52
Which command(s) is supported in the current PowerEdge MX Redfish implementation?
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 53
What is a benefit of using scalable fabric architecture in the MX7000?
A. Management of all servers and fabrics is done from the last chassis in the fabric
B. Management of all fabrics is done from the third fabric in the chassis
C. Management of all servers and fabrics is done from the lead chassis
D. Management of all fabrics is done from the last chassis in the fabric
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://infohub.delltechnologies.com/static/media/client/7phuk h/d3df87a5-ddb7-4917-969d-
24e249b52824.pdf
QUESTION 54
What item is used to refer to a daisy-chained configuration of a multiple MX7000 chassis environment?
A. Wired group B.
Identity group C.
Chassis group D.
Physical group
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://topics-cdn.dell.com/pdf/openmanage-enterprise-modular- v10010-poweredge-
mx7000_users-guide4_en-us.pdf (23)