You are on page 1of 3
Magnetic @ Sonde Type 108-010 and Junction Box Type 134-089 1 Description 2 Operating Instructions 3 Care and Maintenance 4 Repair 5 Illustrated Spa‘e Parts Catalogue 6 Installation / Mounting 7 Putting into Operation £22496/108-010,000012 Edfon: 06, Oct 1998 Marine Gmnblt High Seas Products Postfach 1266 D= 26100 Kiet many ‘Tel +49-4 31-3019-0, Fax +49-431-3019-291 Ea ReceptonDE@raykieicom wor raymarin.com MAGNETIC SONDE Techneal Documentation 5. lllustrated Spare Parts Catalogue 5A Magnetic Sonde, Type 108-010 NGOO1, NG002, NGoO3 All magnetic sondes with See eae z : ald # 5 a Haag | @ arn a H(D)\ H mol i Pos. | Stock no. | Designation Drawing no. _| Piece] Note [1 [4.008 849” | Magnetic sonde } 108-010 NGOOT] 7 Complete exchange only 1 | 4.003.055 | Magnetic sonde | 108-010 NGoo2| 1 | Complete exchange only 1 {4005018 | Magnetic sonde | 108-010 NGoos}_1 | Complete exchange only 52 Junction Box, Type 134-089 gata Pos. | Stock no. | Designation Drawing no. [Piece | Note 2.012798 | Junction Box | 134-089 e ‘Complete exchange only 22495 5-1 4a 42 43 434 MAGNETIC SONDE Repair Repair of the Magnetic Sonde, Type 108-010 Should the magnetic sonde or the magnetic sonde cable be damaged, the magnetic sonde is completely to be exchanged. Note: Manipulations in the interior of the magnetic sonde cannot be performed, as the sonde system has been filled up with synthetic resin. Repair of the Junction Box, Type 134-089 | case the junction box is damaged, the complete junction box is to be exchanged. Checking the Magnetic Sonde for Possible Faults Measuring the DC Resistance of the Magnetic Sonde Checking of the magnetic sonde can be performed e.g. by measuring the DC resis- tance at its connections. The measured values given in the following table should approximately be obtained. ‘Table for measuring the DC resis- tance of the magnetic sonde. Measuring between the following pins: Pin | Measured value Connection 4-5| approx. 151 Ohm] (R2-R1) 1-2] approx. 146 Ohm} (S2-S1) 1-3] approx. 146 Ohm] (S2-S3) Pinna: 3 1 2 5 4 {2-3 approx. 146 Ohm} (S1-3) Connection: 83 se si Rt Re Fig. 4-1: Internal Wiring of the Magnetic Sonde, Type 108-010 22496 4-1

You might also like