Professional Documents
Culture Documents
Catalog
OUR SIGNATURE
STOP/TURN/TAIL
JUST GOT
AN UPGRADE
*as seen on the front cover
Electrical Harness Service Tool | pg. 67 Heated 5x7 Inch Headlight | pg. 40
Model 60 Front Park Turn | pg. 18 Multi-Frequency Backup Alarms | pg. 68-69
Model 33 Hooded Grommet | pg. 52 Heated 5x7 Inch Snow Plow Kit | pg. 41
We invite you to take a moment to read about the meaning of each symbol to help guide you in
making the right purchase decision.
19 Series Male Pin Right Angle PL-3 Fit ‘N Forget S.S. Fit ‘N Forget M/C Right Angle PL-2
Fit ‘NFit
Forget
‘N Forget
S.S. S.S. Fit ‘NFit
Forget
‘N Forget
M/CM/C Right
Right
Angle
Angle
PL-2PL-2 StraightStraight
PL-2 PL-2 StraightStraight
PL-3 PL-3 FemaleFemale
Fit ‘N Forget
Fit ‘N Forget
S.S. S.S.
Fit ‘N Forget S.S. Fit ‘N Forget M/C Right Angle PL-2
Female
Female
Female
PL-10
PL-10
PL-10 Female
Female
Female
PL-3
PL-3
PL-3 Female
Female
Female
PL-2
PL-2
PL-2
NEW
Pages containing new products Signal-Stat products are
PL-10 19 Series Male Pin Right Angle PL-3
®
Straight PL-2 Straight PL-3 Female Fit ‘N Forget S.S.
Fit ‘N
FitForget
‘N Forget
S.S.S.S. Fit ‘N
FitForget
‘N Forget
M/CM/C Right
Right
Angle
Angle
PL-2PL-2 Straight PL-2 Straight PL-3 Female Fit ‘N Forget S.S.
PL-10
PL-10 19 Series
19 Series Male
Male Pin Pin Right
Right Angle
Angle PL-3PL-3 Fit ‘N Forget S.S. Fit ‘N Forget M/C Right Angle PL-2
Straight
Straight
PL-2PL-2 Straight
Straight
PL-3PL-3 Female
Female
Fit ‘NFit
Forget
‘N Forget
S.S. S.S.
FemaleFemale
PL-10 PL-10 FemaleFemale
PL-3 PL-3 FemaleFemale
PL-2 PL-2
PL
-1 PL
Fit ‘N Forget S.S. Fit ‘N Forget M/C Right Angle PL-2 0 -1
0
Fit ‘N Forget S.S. Fit ‘N Forget M/C Right Angle PL-2 each page. A matching red dot PL-10
PL-10
PL-10 product group.
19 Series
1919Series
MaleMale
Series Pin
MalePin
Pin RightRight
Angle
RightAngle
PL-3PL-3
Angle PL-3
PL-10
PL-10
19 Series Male Pin
19 Series Male Pin
Right Angle PL-3
Right Angle PL-3
is next to a part number that FitForget
Fit ‘N ‘N Forget
S.S.S.S. FitForget
Fit ‘N ‘N Forget
M/CM/C Right
Right Angle
Angle PL-2PL-2
Female PL-10
Straight PL-2
Straight
Straight
PL-2PL-2
Female PL-3
Straight PL-3
Straight
Straight
PL-3PL-3
Female PL-2
19
Female
Female
Fit ‘N
Female Fit ‘N Forget S.S.
FitForget
‘N Forget
S.S.S.S. Female PL-10
Female PL-10
Female
Fit PL-3
‘N Forget S.S.
Female PL-3
Female
Fit ‘N Forget M/C PL-2
Female PL-2
Right Angle PL-2
Se 19
Fit ‘NFit
Forget
Fit‘N‘NForget
S.S. S.S.
Forget S.S. Fit ‘NFit
Forget
Fit‘N‘NForget
M/C
Rig M/C
Forget M/C RightRight
Angle
RightAngle
PL-2PL-2
Angle PL-2
ht Rig
PL-10 19 Series Male Pin Right Angle PL-3 ht
PL-10
Super 21 Plug
19 Series Right Angle
M/C Self Seal
Fit ‘N Forget
Male Pin
Fit ‘N Forget Right Angle Straight
Rig
ht
An
g
Straight Female Female Rig
ht
An
PL-10
g
S.S.
L-3 P
L-3
PL-10
PL-10
PL-10 1919
Series
19Series
Series
Male
Male
Male
PinPin
Pin Right
Right
Right
Angle
Angle
Angle
PL-3
PL-3
PL-3 Fit ‘N Forget S.S. Fe Fit ‘N Forget M/C Right Angle PL-2 Straight
Straight
PL-2PL-2
Straight PL-2 Straight
Straight
PL-3PL-3
Straight PL-3 Female
Female
Fit ‘NFit
Female Forget
Fit‘N‘NForget
S.S. S.S.
Forget S.S.
Fit ‘N Forget
Fit ‘N S.S.
Forget S.S. m Fit ‘N Forget
Fit ‘N M/C
Forget F
Female PL-10 Female PL-3 Female PL-2 ale FemaleM/C
Male Pin Right Angle
Right
19 PL-2
Angle
Series PL-2
Hot Wire em
Female Right Angle .180 Bullet Terminal
PL ale
-1 PL Female PL-10 Female PL-3 Female PL-2
0 -1
0
Straight PL-2 Straight PL-3 Female Fit ‘N Forget S.S. Female Male Pin 19 Series Hot Wire Female Right Angle .180 Bullet Terminal
Straight PL-2 Straight PL-3 Female Fit ‘N Forget S.S.
Super
Super
21 Plug
21 Plug M/CM/C
SelfSelf
SealSeal Male
Male
PinPin Female Male Pin 19 Series Hot Wire Female Right Angle .180 Bullet Terminal
Female
Female PL-10
PL-10 Female
Female PL-3PL-3 Female
Female PL-2PL-2
Super 21 Plug Fe M/C Self Seal Male Pin
m Fe
ale m
Fit ale
M/C Self Seal Male Pin FemaleFemale
H4 Connector
H4 Connector H13 Connector
H13 Connector ‘NH5 Connector
H5 Connector Fit
Fo ‘N
Female
Female
MaleMale
Pin Pin 19 Series
19 Series
Hot Wire
Hot Wire Female
Female
Right
Right
Angle
Angle
.180.180
Bullet
Bullet
Terminal
Terminal Fe rg Fo
m et Fe rg
ale S.S m et
Female Male Pin 19 Series Hot Wire Female Right Angle .180 Bullet Terminal PL . ale S.S
Su -3 Male
Male
Male
H4H4
H4
Connector
Connector
Connector PL Ring
Ring
Ring
Terminal
Terminal
Terminal
with
with
with
.180
.180
.180
Bullet
Bullet
Bullet Female
Female
Female .180
. .180
.180
Bullet
Bullet
Bullet
pe Su -3
r2 pe
1P r2
lu 1P
g H5luConnector
Female H4 Connector H13 Connector g
Super 21 Plug M/C Self Seal Male Pin
FitFit
‘N
Fit‘N
Forget
‘NForget
Forget
S.S.
S.S.
S.S. FitFit
‘N
Fit‘N
Forget
‘NForget
Forget
M/CM/C
M/C Right
Right
Right
Angle
Angle
Angle
PL-2
PL-2
PL-2 Super 21 Plug M/C Self Seal Male Pin
Female Female Super 21 M/C Self Male Pin Female 19 Series Female Right Female H4 H13
Super 21 Plug M/C Self Seal Male Pin
Straight PL-2 Straight PL-3 Female Fit ‘N Forget S.S.
StraightStraight
PL-2 PL-2 StraightStraight
PL-3 PL-3 Female Female
Fit ‘N Forget
Fit ‘N S.S.
Forget S.S. Female
Female
PL-10
Female PL-10
PL-10 Female
Female
PL-3PL-3
Female PL-3 Female
Female
PL-2PL-2
Female PL-2
Bullet
PL Female H4 H13 Connector H5 Connector
M -2 PL
Female PL-10 Female PL-3 Female PL-2 /C Female
Female
Male
Male
PinPin 19 Series
19 Series
HotHot
Wire
Wire M Female
Female
Right
Right
Angle
Angle
.180.180
Bullet
Bullet
Terminal
Terminal -2
Female PL-10 Female PL-3 Female PL-2 Super
Super 21 Plug
21 Plug M/CM/C
SelfSelf
SealSeal Se Male
Male Pin Pin /C
lf S Female Male Pin 19 Series Hot Wire Se Female Right Angle .180 Bullet Terminal
lf S
Terminal
Fe ea
m l Fe ea
ale m l
M ale
19 Series Hot Wire Female Right Angle .180 Bullet Terminal a M
Female
Female
H4 Connector
H4 Connector H13 H13 Connectorle P
Connector H5 Connector
H5 Connector ale
in Pin
Female H4 Connector H13 Connector H5 Connector Male H4
Male
Connector
H4 Connector Ring Terminal
Ring Terminal
with .180
withBullet
.180 Bullet FemaleFemale
.180 Bullet
.180 Bullet Deutsch
Deutsch
Deutsch
Connector
Connector
Connector Modeld
Modeld
Modeld
Four
Four
Four
Position
Position
Position
.180
.180
.180 2 Position
22Position
Position
.180
.180
.180
Bullet
Bullet
Bullet
Male H4 Connector Ring Terminal with .180 Bullet Female .180 Bullet Female Male Pin 19 Series Hot Wire Female Right Angle .180 Bullet Te
Female Male Pin 19 Series Hot Wire M Female Right Angle .180 Bullet Terminal
ale M
Female Male Pin 19 Series Hot Wire Female Right Angle .180 Bullet Terminal Pin ale
Straight
Straight
Straight
PL-2
PL-2
PL-2 Straight
Straight
Straight
PL-3
PL-3
PL-3 Female
Female
Female
FitFit
‘N
Fit‘N
Forget
‘NForget
Forget
S.S.
S.S.
S.S. Pin
19 Super
Se 1Super
21 Plug
9Super
2121Plug
Plug M/C M/C
Self
M/CSeal
Self
SelfSeal
Seal MaleMale
Pin
MalePin
Pin
rie Female PL-10 Female PL-3 Female PL-2 Se
Fe PL-10s H PL-10
Female Female Female Female
PL-3 PL-3 Female Female
PL-2 PL-2 rie
m ot Fe sH
ale W m ot
H4 ire ale W
Co H4 ire
Bullet
Deutsch
Deutsch
Connector
Connector ModeldModeld
Four Position
Four Position
.180 .180 2 Position
2 Position
.180 Bullet
.180 Bullet
Fe
MaleMale
H4 Connector
H4 Connector RingRing
Terminal
Terminal
withwith
.180.180
BulletBullet Female
Female
.180.180
Bullet
Bullet m Deutsch Connector Modeld Four Position .180 2 Position .180 Bullet Fe Female H4 Connector H13 Connector H5 Connector
ale m
H1 .180 Bullet Rig ale
Male H4 Connector Ring Terminal with
3C Female .180 Bullet H1 Rig
ht 3C
on An ht
ne gle on An
cto Female H4 Connector H13 .18Connector H5 Connector ne g
Female H4 Connector H13 Connector H5 Connector r 0B
cto
r
le
0B
.18 SIG
SIG
SIG
M ull
ale M et ull
H4 ale Te et
H4 rm HotTeWire
MRK
MRK
MRK
Co in Female
Female
MaleMale
Female Pin
MalePin
Pin 19 Series
1919Series
Series Hot
HotWire
rm Wire Female
Female
RightRight
Female Angle
RightAngle
.180.180
Angle Bullet
.180Bullet
Terminal
BulletTerminal
Terminal
Female
Female
Female
PL-10
PL-10
PL-10 n Super 21 Plug Co M/C Self al Seal Male Pin
neFemale
Female
Female
PL-3
PL-3
PL-3 Female
Female
Female
PL-2
PL-2
PL-2 nn in
al
cto Super 21
Super
Plug21 Plug M/C ecSelfM/C
SealSelf Seal Male PinMale Pin
r to
r
GND
GND
GND
Deutsch Connector Modeld Four Position .180 2 Position .180 Bullet
Female Male Pin 19 Series Hot Wire Female Right Angle .180 Bullet Terminal Female
Female H4 H4 Connector
Connector H13H13
H5 Connector
Connector H5 H5 Connector
Connector
Female Male Pin 19 Series Hot Wire Female Right Angle .180 Bullet Terminal Co H5 Deutsch Connector Modeld Four Position .180 2 Position .180 Bullet
nn Heat Shrink Splice Male
Male
H4Female
H4
Connector
Connector
TA-1415 RingRing
.156 CoTerminal
Terminal
Bullet with
with
.180.180
Bullet
Bullet Female
Female
.180.180
Bullet
Bullet
ec nnShunt
to
r Heat Shrink
Heat Shrink
Splice Splice Female
Male H4 Female
TA-1415
Connector TA-1415 witheShunt
.156 Bullet
Ring Terminal .156 c.180
Bullet Shunt
to Bullet Female .180 Bullet
r
Rin
gT Rin
Ring Terminal with .180 Bullet erm gT
Ring
Female .180
De Bullet erm Male H4 Connector Ring Terminal with .180 Bullet Female .180 Bullet
Deutsch
Deutsch
Connector
Connector Modeld
Modeld
FourFour
Position
Position
.180.180 2 Position
D2e Position
.180.180
Bullet Bullet
.180 Bullet/
uts in
Terminal /
nn .18
0B nn
Ring Terminal
ec 0B
SIG SIG
.156MRKBullet
to ull ec
r et to ull
r et
Stripped
Male H4 Connector Ring Terminal with .180 Bullet Female .180 Bullet
Male H4 Connector Ring Terminal with .180 Bullet Female .180 Bullet
MRK
MRK
GND
Female
Female
H4 Connector
Female H4
H4Connector
Connector H13 H13
Connector
H13Connector
Connector H5 Connector
H5
H5Connector
Connector
Super
Super
Super
2121
Plug
21Plug
Plug M/C
M/C
M/C
Self
Self
Self
Seal
Seal
Seal Male
Male
Male
PinPin
Pin
End
Female Male Pin 19 Series Hot Wire Female Right Angle .180 Bullet Terminal
Female Female
Male PinMale Pin 19 Series
19Hot
Series
WireHot Wire Female Female
Right Angle
Right.180
Angle Bullet
.180Terminal
Bullet Terminal
Fe Heat Shrink Splice Female TA-1415 .156 Bullet Shunt
m
ale GND
Fe
m GND
ale Heat Shrink Splice Female TA-1415 .156 Bullet Shunt
M .18
Female H4 Connector He H13 Connector od H5 Connector 0B H M .18
at eld H5 Connector ull ea od 0B
Female H4 Connector S H13 Connector eld ull
hri Fo et t S
nk ur hri Fo Deutsch
Deutsch
Connector
Connector et Modeld
Modeld
Four
Four
Position
Position
.180.180 2 Position
2 Position
.180.180
Bullet
Bullet
Sp Po nk u
rP
lic sit Male
H4 H4 Connector Sp Ring
Ring Terminal
Terminal withwith
.180.180 Bullet
Bullet oFemale
e io Male Connector lic sit .180.180
Female Bullet
Bullet Deutsch Connector Modeld Four Position .180 2 Position .180 Bullet
n e io Deutsch Connector Modeld Four Position .180 2 Position .180 Bullet
HeatHeat
Shrink Shrink .18 Splice
Splice
0
Female
Female
TA-1415
TA-1415 .156.156
Bullet
Bullet
ShuntShunt n
.18
0
SIG
Modeld Four Position .180 2 Position .180 Bullet Heat Shrink Splice Female TA-1415 .156 Bullet Shunt
SIG
MRK
MRK
Deutsch Connector Fe .180
Modeld Four Position m 2 Position .180 Bullet
2P
os SIG
SIG Fe 2P GND
ale
TA
itio
n
.18
SIG Deutsch Connector male Modeld Four Position .180
os
itio
n
2 Position .180 Bullet GND
-1 TA .18
41 0B -1
Female
Female
Female
Male
Male
Male
PinPin
Pin
5
1919
Series
19Series
Series
Hot
Hot
Hot
Wire
Wire
Wire
ull
et Female
Female
Female
Right MRK
Right
Right MRK
Angle
Angle
Angle
.180
.180
.180
Bullet
Bullet
Bullet
Terminal
Terminal
Terminal
Female H4 Connector
Female Female
H4 Connector
H4 Connector
41
5
H13 Connector
H13 Connector
H13 Connector
0B H5 Connector
ull H5 Connector
H5 Connector
MRK et
MaleMale
H4 Connector
MaleH4
H4Connector
Connector RingRing
Terminal
RingTerminal
withwith
Terminal.180
with.180
Bullet
.180Bullet
Bullet Female
Female
.180.180
Female Bullet
.180Bullet
Bullet
GND
GND Heat
Heat
Shrink
Shrink
Splice
Splice Female
Female
TA-1415
TA-1415 .156.156
Bullet
Bullet
Shunt
Shunt Heat Shrink Splice Female TA-1415 .156 Bullet Shunt
SIG MRK
MRK
MRK GND
GND
Female
Female
Female
H4H4
H4
Connector
Connector
Connector
SIG
H13
H13
H13
Connector
Connector
Connector H5H5
H5
Connector
Connector
Connector GND
Deutsch
Deutsch
Connector
Connector
Deutsch Connector Modeld
Modeld
FourFour
Modeld Position
FourPosition
.180.180
Position .180 2 Position
2 2Position
.180.180
PositionBullet
.180Bullet
Bullet
GND Male H4Male
Male H4 Connector
Connector
H4 Connector Ring Terminal
Ring Terminal SIG
Ring Terminal
with .180
with
with .180 Bullet
Bullet
.180 Bullet
Female .180 Bullet
Female Female
.180 Bullet
.180 Bullet
MRK
Heat
Heat Shrink
Shrink Splice
Splice Female
Female TA-1415
TA-1415 .156.156 Bullet
Bullet Shunt
Shunt
Deutsch Connector Modeld Four Position .180 2 Position .180 Bullet MRK
Deutsch Connector GND.180
Modeld Four Position 2 Position .180 Bullet
MRK
MRK
HeatHeat
Shrink
HeatShrink
Splice
Shrink Splice
Splice Female
Female
TA-1415
Female TA-1415
TA-1415 .156.156
Bullet
.156Bullet
Shunt
BulletShunt
Shunt
TABLE OF CONTENTS
Mirrors 60-61
Marker & Clearance Lighting 22-33
West Coast 60
2 inch 22-24 Convex 61
2.5 inch 24-25
.75 inch 26-27
1 x 2 inch 27-28 Reflector Systems 62-65
1 x 4 inch 29-30
2 x 3 inch 30 Reflectors 62-65
2 x 4 inch 32 Reflective Tape 65
2 x 6 inch 32-33
Maintenance 66-67
License & Back-up 34-37
Anti-Corrosion Compounds 66-67
License Lighting 34-36 Accessories 67
Back-up Lighting 36-37
Headlights 40
Fog & Driving Lights 41
Snow Plow Lights 41-43
Adhesive Mount 44
Bracket Mount 45
STOP
LIGHTING
common size pages
4" 6 -11
CK-LIT
RU
safety benefit for following drivers
E
T
LIFETIME
to react more quickly, resulting in an AR T
Y
RAN
average distance of 3’ reaction time
0.66"
1.45" advantage for every 10 mph
• LEDs have no filament, therefore
are extremely resistant to shock &
KIT
vibration
• Less current draw, resulting in
44302R 44030R - KIT increased battery & alternator life
while allowing more power for other
vehicle requirements
LED
FLANGE MOUNT / KIT
• Faster illumination offers significant
CK-LIT
5.5"
SUPER 44
RU
safety benefit for following drivers
E
T
LIFETIME
AR T to react more quickly, resulting in an
W
N
RA
THE ORIGINAL.
Truck-Lite’s 6-diode Super 44 ® Stop/Turn/Tail puts industry-leading
design, engineering and manufacturig to work every day – for life.
Using only the highest-quality LEDs and electronics, the Super 44 ® is built
to go the distance. Just look for the iconic pentastar light pattern at
your nearest distributor.
E
T
LIFETIME
AR T
Y
RAN
NEW
1.45"
0.66"
44557R 44556R -
HARDWIRED
• Offers the same safety and low-maintenance benefits of existing LED S/T/T and BU lights now in one package
• Complies with FMVSS requirement for minimum of 75 cm2 of luminous red area
• Saves space in inventory when stocking a two-in-one product
• New combination lamps are the same size as existing Truck-Lite Model 44 lights, so they fit into existing mounting holes
• Lower-cost system when replacing other hardwired 44 products
E
T
LIFETIME
S/T/T and BU lights now in one package AR T
Y
RAN
• Complies with FMVSS requirement for
minimum of 75 cm2 of luminous red area
• Saves space in inventory when stocking a
two-in-one product
• New combination lamps are the same size
as existing Truck-Lite Model 44 lights, so
they fit into existing mounting holes
• Lower-cost system when replacing other
hardwired 44 products
LED
S/T/T + BACK-UP COMBO
• Offers the same safety and low-maintenance benefits of 5.5"
SUPER 44
CK-LIT
RU
existing LED S/T/T and BU lights now in one package
E
T
LIFETIME
AR T
• Complies with FMVSS requirement for minimum of 75 cm2 of
W
RA N
luminous red area
• Saves space in inventory when stocking a two-in-one
product
• New combination lamps are the same size as existing Truck- NEW
Lite Model 44 lights, so they fit into existing mounting holes 0.70"
• Lower-cost system when replacing other hardwired 44 1.40"
products
LED
S/T/T + BACK-UP COMBO
• Offers the same safety and low-maintenance benefits of existing 5.5"
SUPER 44
CK-LIT
RU
LED S/T/T and BU lights now in one package
E
T
LIFETIME
AR T
• Complies with FMVSS requirement for minimum of 75 cm2 of
W
RAN
luminous red area
• Saves space in inventory when stocking a two-in-one product
• New combination lamps are the same size as existing Truck-Lite
Model 44 lights, so they fit into existing mounting holes NEW
• Lower-cost system when replacing other hardwired 44 products 0.66"
1.40"
LED
® • Uses standard PL-3 connector
• When properly mounted, exceeds FMVSS-P2
DOT requirements for marker/clearance
SIGNAL-STAT
RU
CK-LIT performance
2 YEAR
E
RAN
• Epoxy-encapsulated electronics ®
E
T
• Uses standard right-angle AR T
Y
RAN
connection
E
T
• Heavy-duty bulb lasts longer AR T
Y
RAN
• Uniquely designed shock-mount
extends lamp life
KIT
40 SERIES
40700 grommet,
Right Angle Stripped End/
40002R PL-3 PC Black 12 2.1/0.48 – 94993 plug,
PL-3 Ring Terminal
40202R lamp
GROMMET MOUNT
• Grommet kit features flush mounting in a CK-LIT
RU
4-1/2” hole
1 YEAR
E
T
RAN
40 ECONOMY
Part Lens
Lamp Connector Volts Amps Major/Minor
Number Material
40282R PL-3 PC 12 2.1/0.48
INCANDESCENT
FLANGE MOUNT
CK-LIT
• Flange kits feature a high impact plastic affixed to lamp
RU
• High-impact plastic affixed to lamp
1 YEAR
E
T
AR T
W
RAN
Part Lens
Lamp Connector Volts Amps Major/Minor
Number Material
40 ECONOMY
40229R PL-3 PC 12 2.16/0.47
INCANDESCENT
GROMMET MOUNT
CK-LIT
• Uniquely designed shock-mount
RU
extends lamp life
3 YEAR
E
T
AR T
W
RAN
SUPER 40
Part Lens
Lamp Connector Volts Amps Major/Minor
Number Material
40242R PL-3 PC 12 2.16/0.47
LED
S/T/T + BACK-UP COMBO / HARDWIRED
• Offers the same safety and low
60 SERIES
CK-LIT
RU
maintenance benefits of existing LED
E
T
LIFETIME
AR T
S/T/T and BU lights now in one package
W
RAN
• Not orientation dependent; complies
with FMVSS 108 vertically or horizontally
• Save space in inventory
• Lower-cost system
• Lamps are the same size as existing
Truck-Lite Model 60 lights, which means
they fit into existing mounting holes
E
T
LIFETIME
now in one package AR T
Y
RAN
• Not orientation dependent; complies with
FMVSS 108 vertically or horizontally
• Save space in inventory
• Lower-cost system
• Lamps are the same size as existing Truck-
Lite Model 60 lights, which means they fit into
existing mounting holes
CK-LIT
RU
existing LED S/T/T and BU lights now in one package
E
T
LIFETIME
• Not orientation dependent; complies with FMVSS 108 AR T
Y
RAN
vertically or horizontally
• Save space in inventory
• Lower-cost system
• The new combination lamps are the same size as
existing Truck-Lite Model 60 lights, so they fit into
existing mounting holes
LIFETIME
60 SERIES
RAN
reaction time advantage for every 10 mph
LED
®
• Epoxy-encapsulated electronics
prevents damage from moisture &
corrosion
SIGNAL-STAT
RU
CK-LIT • Unique LED array displays full pattern
2 YEAR light output design
E
T
RAN
INCANDESCENT
OVAL, GROMMET MOUNT / KIT
CK-LIT
• Mounts horizontally or vertically
RU
• Right-angle plug assembly
2 YEAR
E
T
AR T
W
RAN
KIT
SUPER 60
60020R - KIT 60202R
LED
GROMMET MOUNT
• 24 diode pattern
SIGNAL-STAT
®
connection
T
AR T
W
RAN
Part Lens
Lamp Connector Volts Amps Major/Minor
Number Material
4550 PL-3 AC 12 0.38 / 0.03
GROMMET MOUNT
• Uses standard right angle PL-3
SIGNAL-STAT
connection
• Unique LED array displays full pattern
light output RU
CK-LIT
2 YEAR
E
• Epoxy-encapsulated electronics
T
AR T
Y
RAN
Part Lens
Lamp Connector Volts Amps Major/Minor
Number Material
4558 PL-3 AC 12 0.28 / 0.03
GROMMET MOUNT
• Heavy-duty dual-filament cartridge bulb CK-LIT
RU
• Mount horizontally or vertically 2 YEAR
E
T
• Unique shock mount absorbs shock & vibration AR T
Y
RAN
SUPER 45
Part Lens
Lamp Connector Volts Amps Major/Minor
Number Material
45202R PL-3 PC 12 2.16/0.47
RAN
the vertical plane
• Three versions: each features turn and hazard
functions, stop and tail functions or back-up functions
KIT
SUPER 45
EVERYTHING YOU
EXPECT AND MORE.
Truck-Lite’s multi-purpose maintenance spray does
everything you expect from a multi-purpose spray
while also being dielectric and non-corrosive – so
it’s safe to use on or around electronics, plastics,
rubber and silicone.
SIGNAL
LIGHTING
common size pages
4” 16 - 17
2” x 6” 18 - 20
3” x 5” 20
pedestal 21
CK-LIT
light output design
RU
• Epoxy-encapsulated electronics prevents
2 YEAR
E
T
AR T
damage from moisture and corrosion
W
RAN
• Less current draw, resulting in increased
battery and alternator life while allowing
more power for other vehicle requirements
• LEDs do not have a filament, therefore are
not susceptible to damage from shock
and vibration
INCANDESCENT
GROMMET MOUNT
• Uniquely designed shock mount extends lamp life
• Diamond Shell versions available for additional
protection
• Available with or without reflectorized lens
• 8 square inch (illuminating) stop/turn lens area for
vehicles under 80 inches wide
• Meets reflex, tail or clearance function for vehicles over
SUPER 40
80 inches wide (Use part# 40248R)
• Upgrade to LED Lighting Systems using Truck-Lite’s
Super 44 series.
INCANDESCENT
GROMMET MOUNT / KIT
CK-LIT
• Heavy-duty bulb for long-lasting life
RU
• Uniquely designed shock mount extends
2 YEAR
E
T
AR T
lamp life
W
RA N
• Available with or without reflectorized lens
• Flush-mount grommets are designed for
KIT • mounting in a 4 1/2" hole
40 SERIES
8 square inch (illuminating) stop/turn lens
area for vehicles under 80 inches wide
• Meets reflex, tail or clearance function for
vehicles over 80 inches wide 40002Y - KIT 40202Y
• Upgrade to LED lighting systems using
Truck-Lite’s Super 44 series of products
40202Y light,
Right Angle Stripped End/ PC
40002Y PL-3 Yellow Black 12 2.1 / 0.48 94993 plug,
PL-3 Ring Terminal 40700 grommet
AR T
• 8 square inch (illuminating) stop/turn lens area for
W
RAN
vehicles under 80 inches wide
• Meets reflex, tail or clearance function for vehicles over
80 inches wide
40 ECONOMY
GROMMET MOUNT
• Low-diode design – 8 LEDs
60 SERIES
CK-LIT
RU
• Faster illumination offers significant safety benefit for following
E
T
LIFETIME
drivers to react quickly, resulting in an average of 3’ reaction AR T
Y
RAN
time advantage for every 10 m.p.h.
• Meets stringent Front, Park and Turn requirements
• LEDs do not have a filament, therefore are not susceptible to
NEW damage from shock and vibration
• Less current draw, resulting in increased battery and alternator
life while allowing more power for other vehicle requirements
FLANGE MOUNT
• Low-diode design – 8 LEDs
60 SERIES
CK-LIT
RU
• Faster illumination offers significant safety benefit for following
E
T
LIFETIME
drivers to react quickly, resulting in an average of 3’ reaction AR T
Y
RAN
time advantage for every 10 m.p.h.
• Meets stringent Front, Park and Turn requirements
• LEDs do not have a filament, therefore are not susceptible to
NEW damage from shock and vibration
• Less current draw, resulting in increased battery and alternator
life while allowing more power for other vehicle requirements
GROMMET MOUNT
• Faster illumination offers significant safety benefit
60 SERIES
CK-LIT
RU
for following drivers to react quickly, resulting in
E
T
LIFETIME
an average of 3’ reaction time advantage for every AR T
W
RAN
10 m.p.h.
• Meets stringent Front, Park and Turn requirements
• LEDs do not have a filament, therefore are not
susceptible to damage from shock and vibration
• Less current draw, resulting in increased battery
and alternator life while allowing more power for
other vehicle requirements
LED
GROMMET MOUNT
• Popular for owner/operator show trucks
SIGNAL-STAT
®
RAN
INCANDESCENT
2 SCREW MOUNT, KIT
CK-LIT
• Features dual contact marker/clearance and side
RU
turn or auxiliary turn functions
1 YEAR
E
T
AR T
• Mounts on surface of vehicle or with "L" bracket
W
RAN
KIT
22 SERIES
Part Lamp Lens Lens Amps
Plug Side 1 Plug Side 2 Volts Kit Includes
Number Connector Material Color Major/Minor
Stripped End/ 22202R light,
22002R PL-3 Right Angle PL-3 PC Red 12 2.1/0.49
Ring Terminal 94993 plug
Stripped End/ 22202Y light,
22002Y PL-3 Right Angle PL-3 PC Yellow 12 2.1/0.49
Ring Terminal 94993 plug
Stripped End/ 22006R light,
22004R PL-3 Right Angle PL-3 PC Red 12 2.1/0.49
Ring Terminal 94993 plug
Stripped End/ 22006Y light,
22004Y PL-3 Right Angle PL-3 PC Yellow 12 2.1/0.49
Ring Terminal 94993 plug
E
T
• Narrow width facilitates horizontal mounting AR T
Y
RAN
• Red lamp should be used only for rear vehicle
applications
• Meets SAE J2039 recommendation for side turn signal
KIT
60 SERIES
E
T
• Upgrade to Truck-Lite LED lighting AR T
Y
RAN
systems using Super 66 or 60 Series
LED products
SUPER 60
GROMMET MOUNT
• Uses standard right angle PL-3
SIGNAL-STAT
connection
• Unique LED array displays full pattern
light output RU
CK-LIT
2 YEAR
E
AR T
W
RAN
Part Lens
Lamp Connector Volts Amps Major/Minor
Number Material
4558A PL-3 AC 12 0.28 / 0.03
INCANDESCENT
GROMMET MOUNT
CK-LIT
• Mount horizontally or vertically
RU
• Heavy-duty, dual-filament cartridge bulb
2 YEAR
E
T
AR T
• Unique shock mount absorbs shock and vibration
W
RAN
• Upgrade to LED lighting systems using Truck-Lite’s
Super 45 LED series product line
45 SERIES
Part Lens Lens Mount/ Amps
Lamp Connection Volts
Number Material Color Trim Color Major/Minor
45202Y PL-3 PC Yellow Black 12 2.16 / 0.47
LED
® • Ideal for show trucks, highway, mowing, municipal
and farm equipment
• Chrome-plated housing
DUAL FACE
Part Lamp Plug Housing Housing Amps
Plug Side 2 Lens Color Volts
Number Connector Side 1 Material Color Major/Minor
2750 Hardwired Hardwired Stripped End/Ring Terminal Red | Yellow Zinc Chrome 12 0.73/0.05
MASTER
TRAINING
The Truck-Lite Training Institute offers
lighting and harness education to technicians.
Online courses are FREE and available 24/7.
www.truck-lite.com/tti
MARKER &
CLEARANCE
LIGHTS
common size pages common size pages
E
T
LIFETIME
30 SERIES
AR T
Y
RAN
Part Lens Color Lamp Connector Volts Amps Diodes Lighting Codes
Number
30250R Red Fit 'N Forget M/C 12 0.05 2 P2|P3
30250Y Yellow Fit 'N Forget M/C 12 0.05 2 P2|P3
LED
® • Standard connection
• Unique 10 diode starburst light
2 IN ROUND
output
• Encapsulated electronics
• Not suitable for PC
requirements
INCANDESCENT
CK-LIT
• Wabash and Monon replacement
RU
• “ABS’’ version complies with FMVSS 108
1 YEAR
E
T
AR T
requirement for ABS malfunction indicator lamp
W
RAN
on trailer and ABS braking systems
• 12 volt, 15,000-hour-rated bulb life
• Lamp designed for PC requirements on a
45-degree angle in mounting devices #30720,
#00801, #00803, #00804 or surface-mount flange
30 SERIES
Part Lamp
Lens Color Volts Amps Bulbs Lighting Codes
Number Connector
30200B Blue PL-10 12 0.33 1 P2|P3|PC
30200G Green PL-10 12 0.33 1 P2|P3|PC
30200R Red PL-10 12 0.33 1 P2|P3|PC
30200Y Yellow PL-10 12 0.33 1 P2|P3|PC
30230Y Yellow PL-10 12 0.33 1 P2|P3|PC
30257Y Yellow PL-10 12 0.33 1 P2|P3|PC
RAN
requirements
30 SERIES
E
T
• Standard PL-10 connection.
2 IN BEEHIVE
AR T
Y
RAN
E
T
• Lens and housing are sonically sealed AR T
Y
RAN
• High-impact polycarbonate construction
• 12, volt 15,000-hour-rated bulb
• Suitable for PC requirements on a 45 ̊ angle
30 SERIES
Part Lamp
Lens Color Volts Amps Bulbs Lighting Codes
Number Connector
30201R Red PL-10 12 0.33 1 P2|PC
30201Y Yellow PL-10 12 0.33 1 P2|PC
E
T
LIFETIME
• Completely sealed electronics resist
10 SERIES
AR T
W
Y
RAN
corrosion and moisture
• Less current draw, resulting in increased
battery and alternator life while allowing
more power for other vehicle requirements
• Polycarbonate lens
Part Lens Color Lamp Connector Volts Amps Diodes Lighting Codes
Number
10250R Red Fit 'N Forget M/C 12 0.03 2 P2
10250Y Yellow Fit 'N Forget M/C 12 0.08 2 P2
LED
CK-LIT
• Popular on owner/operator and show
RU
trucks
2 YEAR
E
T
2.5 IN ROUND
AR T
• Standard PL-10 connection
W
RAN
• Unique 13 diode starburst light output
• Encapsulated electronics prevent
damage from moisture and corrosion
REFLECTORIZED 1050A 1050
Part Lamp
Lens Color Volts Amps Diodes Lighting Codes Reflecorized
Number Connector
1050 Red PL-10 12 0.01 13 P2 –
1050A Yellow PL-10 12 0.01 13 P2 –
1052 Red PL-10 12 0.01 4 P2 Yes
1052A Yellow PL-10 12 0.01 4 P2 Yes
INCANDESCENT
GROMMET MOUNT / REFLECTORIZED
CK-LIT
• Lens and housing are sonically sealed
RU
• High-impact polycarbonate construction
1 YEAR
E
T
AR T
• 15,000-hour-rated bulb life
W
RAN
• Available in either 12 volt or 24 volt
• Meets PC requirement on a 45 ̊ angle in mounting
devices #10708, #10720, #00803 or #00804
• Replaces Signal-Stat 1010 and 1011 series
10 SERIES
REFLECTORIZED GROMMET
MOUNT
Part Lamp
Lens Color Volts Amps Bulbs Lighting Codes Reflectorized
Number Connector
10202R Red PL-10 12 0.33 1 P2|PC –
10202Y Yellow PL-10 12 0.33 1 P2|PC –
10205R Red PL-10 12 0.33 1 A|P2|PC Yes
10205Y Yellow PL-10 12 0.33 1 A|P2|PC Yes
INCANDESCENT
GROMMET MOUNT / REFLECTORIZED
CK-LIT • Unique shock-mount extends bulb life
RU
RAN
• Meets PC requirements on a 45 ̊ degree
angle using all mounting devices
SUPER 10 SERIES
REFLECTORIZED REFLECTORIZED
Part Lamp
Lens Color Volts Amps Bulbs Lighting Codes Reflectorized
Number Connector
10212Y Yellow PL-10 12 0.33 1 P2|PC –
10213Y Yellow PL-10 12 0.33 1 P2|PC –
10208R Red PL-10 12 0.33 1 A|P2|PC Yes
10208Y Yellow PL-10 12 0.33 1 A|P2|PC Yes
m
ale
H1 Rig
H5
Co
n
AVAILABLE
ne
33 SERIES
transportation industry
De in
uts al
E
T
wit
LIFETIME
ch
Co h
n .18
ne 0B
AR T
Y
RAN
Fe
m
• Hardwired lamp design is easily retrofitted
• LEDs draw less current, allowing more power for
ale
M .18
He od 0B
at eld ull
Shri Fo et
KIT
nk u
Fe 2P
m os
ale itio
Rig
ht
33250R light,
33050R Red Hardwired Hardwired .180 Bullet 12 0.05 1 P2
33700 grommet Rig
ht
An
g le
33250Y light,
Str PL
aig -2
33700 grommet
Fe
m
ale
PL
-1
0
33275R light,
33075R Red Hardwired Hardwired .180 Bullet 12 0.14 1 PC
33700 grommet
Fe
m
ale
Fit
‘N
Fo
Fe rg
m et
33275Y light,
ale S.S
PL .
Su -3
33700 grommet
lu
g
M
ale
Pin
19
Se
rie
Fe sH
m ot
ale W
H4 ire
Co
n ne
cto
r
m
ale
H1 Rig
H5
Co
n
AVAILABLE
ne
cto
r
Rin
CK-LIT
CONNECTORS
gT
RU
erm
transportation industry
De in
uts al
E
T
wit
LIFETIME
ch
Co h
n .18
ne 0B
AR T
Y
RAN
Fe
m
• Functions as a marker, auxiliary turn and auxiliary
stop when properly installed
ale
M .18
He od 0B
at eld ull
S hri Fo et
KIT
nk u
easily retrofitted
SI
G
MR .15
K 6B
ull
GN et
Sh
LED
FLANGE MOUNT, KIT
• World smallest LED marker lamp for the transportation industry
33 SERIES
CK-LIT
RU
RAN
installed
• Best-in-class auxiliary brake function is seven times brighter than marker
KIT function
• Marker function exceeds P2 legal requirements
• Requires a 3/” mounting hole
• Hardwired lamp with .180 male bullet design can be easily retrofitted
• LEDs draw less current, allowing more power for other vehicle requirements
• LEDs do not have a filament, therefore are not susceptible to damage from
shock and vibration
• Engineered to withstand the toughest working environments
• Electronics sealed in epoxy to resist corrosion and moisture
• Complies with FMVSS-108 marker/clearance requirements
33207Y Yellow Black Hardwired Hardwired .180 Bullet 12 0.12/0.03 1 P2 33800 flange
33208R Red Chrome Hardwired Hardwired .180 Bullet 12 0.17/0.02 1 P2 33810 flange
33208Y Yellow Chrome Hardwired Hardwired .180 Bullet 12 0.12/0.03 1 P2 33810 flange
LED
• Provides a clearance/marker solution that requires no mounting
CK-LIT
RU
brackets or installation screws
E
T
LIFETIME
• Lamps adhere directly to application surface through the use of
36 SERIES
AR T
W
RAN
heavy-duty adhesive backing
• Easy-to-install, peel-off liner
• Hardwired lamp design is easily retrofitted
• Rear exit wire version requires a 3/8 mounting hole, and self-seals
hole upon installation
• Side mount options can be mounted without any mounting holes
• LEDs draw much less current, allowing more power for other
vehicle requirements
• Electronics are completely sealed in epoxy to resist damage
caused by moisture and corrosion
• Reduces lighting costs caused by heat entrapment.
CK-LIT
RU
corners on a radius
E
T
LIFETIME
• Provides a clearance/marker solution that requires no AR T
Y
RAN
mounting brackets or installation screws
• Lamps adhere directly to application surface through the
use of heavy-duty adhesive backing
• Easy-to-install, peel-off liner
• Hardwired lamp design is easily retrofitted
• Rear exit wire version requires a 3/8” mounting hole and
self-seals hole upon installation
• Side-mount options can be mounted without any
mounting holes
• LEDs draw much less current, allowing more power for
other vehicle requirements
• Electronics are completely sealed in epoxy
trucks
1X2 IN RECTANGULAR
• Standard connection
• 2 Diode (red), 3 diode (yellow) LED pattern
• Encapsulated electronics prevent damage
from moisture and corrosion
• Not suitable for PC requirements
Part Lamp
Lens Color Volts Amps Diodes Lighting Codes
Number Connector
1560 Red PL-10 12 0.05 2 P2
1560A Yellow PL-10 12 0.05 3 P2
BRACKET MOUNT
• Fits in most narrow header rails CK-LIT
RU
• Mounts vertically or horizontally
3 YEAR
E
T
RAN
• Snap-lock tabs allow quick and easy installation
• Suitable for PC requirements on a 45 ̊ angle
15 SERIES
Part Lamp
Lens Color Volts Amps Bulbs Lighting Codes
Number Connector
15200R Red PL-10 12 0.33 1 P2|PC
15200Y Yellow PL-10 12 0.33 1 P2|PC
LED
Straight PL-2 Straight PL-3 Female Fit ‘N Forget S.S.
19 SERIES
• Must be mounted horizontally
• PC-rated lamps meets requirements when mounted on a 45 degree
angle Female PL-10 Female PL-3 Female PL-2
Part Lens Color Lamp Connector Volts Amps Diodes Lighting Codes Warranty
Number
19250R Red 19 Series Male Pin 12 0.05 2 P2|PC 3-year
19250Y Yellow 19 Series Male Pin 12 0.05 4 P2|PC 3-year
19350R Red Fit 'N Forget M/C
Female Male Pin
12 19 Series Hot Wire
0.05
Female Right Angle .180 Bullet Terminal
2 P2|PC LIFETIME
19350Y Yellow Fit 'N Forget M/C 12 0.05 4 P2|PC LIFETIME
LED
RU
CK-LIT • Slim 3/4’’ wide design makes lamp AVAILABLE
perfect solution for narrow rail designs CONNECTORS
E
T
LIFETIME
• Must be mounted horizontally
Male H4 Connector Ring Terminal with .180 Bullet Female .180 Bullet
35 SERIES
AR T
W
RAN
TERMINAL
CK-LIT
• Popular in owner/operator and show
RU
trucks
2 YEAR
E
T
• Standard connection
1X4 IN RECTANGULAR
AR T
W
RAN
• 4 diode LED pattern
• Encapsulated electronics
• Not recommended for PC applications
Part Lighting
Lens Color Lamp Connector Volts Amps Diodes
Number Codes
1960 Red Male Pin 12 0.05 4 P2
1960A Yellow Male Pin 12 0.05 4 P2
BRACKET MOUNT
• Designed to fit in limited mounting areas CK-LIT
RU
• Fits in most narrow header rails
1 YEAR
E
T
• Can be mounted vertically or horizontally AR T
Y
RAN
• Snap-lock tabs allow quick and easy installation
• Replaces Signal-Stat 1900 series
19 SERIES
Part Lens Color Lamp Connector Volts Amps Bulbs Lighting Codes
Number
19200R Red 19 Series Male Pin 12 0.33 2 P2|P3|PC
19200Y Yellow Fit 'N Forget M/C 12 0.33 2 P2|P3|PC
2 SCREW, KIT
• Features unique plug-in design for
ease of installation
• Low-profile extra-strength base
KIT
• Suitable for PC requirements on a
45 ̊ angle
19 SERIES
1 YEAR
E
T
Part Lamp
Lens Color Volts Amps Bulbs Lighting Codes
Number Connector
14200R Red PL-10 12 0.33 1 A|P2
14200Y Yellow PL-10 12 0.33 1 A|P2
TESTED.
TRUSTED.
TOUGH.
REFLECTORIZED
• Innovative optic design allows one PC-rated lamp the
21 SERIES
CK-LIT
RU
ability to function as two
E
T
LIFETIME
• Draws less current, allowing more power for other AR T
W
RAN
vehicle requirements
• Uses standard mounting holes and accessories
Part Lighting
Lens Color Mount Color Lamp Connector Volts Amps Diodes
Number Codes
21251R Red Red Fit 'N Forget M/C 12 0.1 1 A|P2
21251Y Yellow Yellow Fit 'N Forget M/C 12 0.1 2 A|P2
LED
et
S.S
.
REFLECTORIZED Fit
Rig
ht
An
gle
‘N PL
Fo -3
rg
et
Str M
aig /C
2X6 IN RECTANGULAR
versions
• Optional mounting and sealing gaskets
Rig
ht
An
g le
Str PL
Fe
m
ale
Fit
‘N
Fo
Fe rg
m et
ale S.S
PL .
Su -3
pe
r2
1P
lu
g
SUPER 21®
SERIES, INCANDESCENT, 2” X 6” RECTANGULAR Fe
m
ale
INCANDESCENT
H1 Rig
H5
Co
n
CK-LIT
Rin
RU
CONNECTORS
gT
reflectorized lens
erm
De in
E
T
uts al
LIFETIME
ch wit
Co h
n .18
ne
RAN
a 45-degree angle with additional Fe
reflectors
m
ale
M .18
He od 0B
at eld ull
Shri Fo et
KIT
Sp os
lic itio
e n
SUPER 21 SERIES
.18
0
requirements
• Optional gaskets available to improve .180 BULLET 2P
STRIPPED END
Fe os
m itio
#03-5100-0-097/8 K 6B
ull
GN et
Sh
D un
t
LICENSE &
BACK-UP LIGHTS
category pages
License 34 - 36
Back-up 36 - 37
Part Lamp Plug Plug Lens Lens Mount Volts Amps Kit Includes
Number Connector Side 1 Side 2 Color Material Color
Female
15205 Hardwired Hardwired Clear PC – 12 0.03 –
PL-10
Female 15205 light, 15729 bracket
15040 Hardwired Hardwired Clear PC Gray 12 0.03
PL-10 mount, 97032 gasket
INCANDESCENT
BRACKET MOUNT / KIT
• High-impact polycarbonate, sonically sealed
KIT lens and housing
• Available in 12 or 24-volt versions
• Features 15,000-hour-long life
• Must be used with Model 15 mounting brackets
• Replaces Signal-Stat 1502W 15208
15 SERIES
• Upgrade to LED lighting systems using Truck-
Lite’s 15 Series LED license lamps
15011 - KIT
• Features snap-fit mount for quick installation
and easy replacement
• Bracket may be surface mounted
15011 - KIT
Part Lamp Lens Lens Mount Volts Amps Kit Includes Warranty
Number Connector Color Material Color
15208 light,
15011 PL-10 Clear PC Gray 12 0.33 15729 bracket lifetime
97032 grommet
INCANDESCENT
BRACKET MOUNT
• Fruehauf replacement lamp
• High-impact polycarbonate, sonically
sealed lens and housing
• Long-life, 15,000-hour bulbs
• License or utility applications
• Replaces Signal-Stat 1901W
19 SERIES
Part Lamp Lens Lens Volts Amps
Number Connector Color Material
19 Series
19206 Clear PC 12 0.33
Male Pin
INCANDESCENT
GROMMET MOUNT, ROUND
• Features chrome-plated brass housing
• Snap-fit design uses standard 1-1/4”
diameter hole
• Commonly used to illuminate a license
plate on step bumpers
• Two units required for license illumination
26 SERIES
KIT
26 SERIES
Part Lamp Plug Plug Lens Lens Mount Volts Amps Kit Includes
Number Connector Side 1 Side 2 Color Material Color
26335 Hardwired Hardwired Stripped End Clear PC Gray 12 0.59 26380 hood
output design RU
CK-LIT
2 YEAR
E
T
RAN
INCANDESCENT
• Polycarbonate lens and housing are sonically sealed
• Bulb is shock-mounted for extended life
• Legal only for back-up function
• Not recommended for dome lamp use
• Replaces Signal-Stat 4041W and 4047W
• Upgrade to LED lighting systems using Truck-Lite’s Super 44
series products
40 SERIES
Part Lamp Lens Lens Volts Amps Housing Color
Number Connector Color Material
40204 PL-2 Clear PC 12 2.1 White
INCANDESCENT
• Uniquely designed shock mount extends lamp life
• Sealed polycarbonate lens and housing resist heat and impact
• Flange and flush mount grommets designed for mounting in a
4-1/2” hole
• Not recommended for dome lamp use
• Upgrade to LED Lighting Systems using Truck-Lite’s Super 44
Series products
SUPER 40
Part Lamp Lens Lens Volts Amps
Number Connector Color Material
40244 PL-2 Clear PC 12 2.1
LED
® • Popular on owner/operator show trucks
• Uses standard right-angle connection
• 24-diode pattern
SIGNAL-STAT
• Unique LED array displays a full pattern light output design
• Epoxy-encapsulated electronics resist damage from moisture and
corrosion
• Less current draw, resulting in increased battery and alternator life
while allowing more power for other vehicle requirements
• LEDs do not have a filament, therefore are not susceptible to damage
from shock and vibration
• Two lamps required for back-up
• Legal mounted horizontally or vertically
WORK
LIGHTING
category pages
LED 38
Incandescent 39
• IP68 compliant TR
UCK-LIT
RU
CK-LIT
E
• Variety of mounting applications
T
A
LIFETIME
• Limited lifetime warranty AR T
Y
CO
M PA N Y RAN
CO
M PA N Y
LED
® • Heavy-duty, die-cast aluminum housing
• Lens manufactured with impact-resistant acrylic material
• Rear fins keep heat away from LEDs and lamp circuitry,
SIGNAL-STAT
RU
CK-LIT allowing for increased light output and light longevity
2 YEAR
E
RAN
LED
® • Heavy-duty, die-cast aluminum housing
• Lens manufactured with impact-resistant acrylic material
• Rear fins keep heat away from LEDs and lamp circuitry,
SIGNAL-STAT
RU
CK-LIT allowing for increased light output and light longevity
2 YEAR
E
RAN
INCANDESCENT
CK-LIT
• Durable synthetic rubber housing resists corrosion
RU
• Includes mounting hardware
1 YEAR
E
T
AR T
• Contains one clear Par 36 sealed trapezoid beam
W
RAN
with multipurpose terminals
• Fluted lens disperses light evenly
• Mounts on one 5/16”-18 stud
5 IN
HEADLIGHTS
& FOG LIGHTS
category pages
Headlights 40
CK-LIT
RU
3 YEAR
E
T
5 IN X 7 IN HEATED HEADLIGHT
AR T
Y
RAN
SNOW PLOW LIGHT, LED, 5"X 7" & 7”, 1 STUD MOUNT,
LED
HEATED LENS, KIT
• Headlight heats constantly under 10°C/50°F
AR T
shock and vibration, replacing headlights and turn signal
W
RAN
lights blocked by the plow assembly
• 80985 Utilizes Truck-Lite′s 27275C 5x7 inch heated
headlight
KIT • 80990 Utilizes Truck-Lite′s 27275C 7 inch heated
headlight
• Heated lens prevents snow, ice, and slush buildup
• LED design draws less current, allowing more power for
other vehicle requirements
• DOT-compliant LED headlight provides a brighter, crisper NEW
and whiter light output, closer to the color temperature of 80985 Kit Includes
daylight, dramatically improving light projection distance 80983 light, 80984 light, 80898 harness
and increasing visibility
• Advanced white LED technology reduces concerns with
EMI and offers substantially longer life than comparable
incandescent lights
• Pedestal light (front/park/turn) features a unique LED
diode array with a full pattern appearance
• Lights are hardwired with fully encapsulated electronics
to protect from damage caused by corrosive elements
• Corrosion-resistant, powder-coated aluminum housing
dissipates heat efficiently
• Impact-resistant polycarbonate lenses protect against
damage caused by debris and other hazards
Packard Connector
Aluminum/
80985 (5”x7”) Clear PC Hardwired Hardwired 12020829 12|24 3.6/1.8 Steel Black Die Cast
Zinc
Packard Connector
80990 (7”) Clar PC Hardwired
12020829/
Hardwired Packard Connector Die-Cast
12|24 3.8 / 2.1 Steel Black Aluminum
12015793
LED
BRACKET MOUNT, KIT, FREIGHTLINER
• Designed as a direct replacement for 2007-2016 Freightliner
Cascadia fog lights RIGID FOG LIGHT
• Waterproof H11 Deutsch adapter plugs directly into factory
RU
CK-LIT TR
UCK-LIT
harness
A
E
E
LIFETIME
AR T CO
• Pure white light output is closer to the color temperature of
W
RAN M PA N Y
fog lights
• Waterproof H11 to Deutsch adapter plugs directly into factory
harness TR
UCK-LIT
RU
CK-LIT
E
T
• SAE J583 compliant fog lights project high-intensity, crisp light
E
LIFETIME
• Pure white light output is closer to the color temperature of AR T
Y
CO
M PA N Y RAN
E
T
• SAE J583 compliant fog lights project high-intensity, crisp light
E
LIFETIME
• Pure white light output is closer to the color temperature of AR T
Y
CO
M PA N Y RAN
LIFETIME
• Pure white light output is closer to the color temperature of AR T
W
CO
M PA N Y RAN
LED
BRACKET MOUNT, KIT
• Designed as an aftermarket fog light kit for D-Series Universal
E
E
LIFETIME
AR T CO
daylight, dramatically improving overall visibility
W
RAN M PA N Y
LED
BRACKET MOUNT, KIT
• Designed as a universal aftermarket LED fog light kit using
E
E
LIFETIME
AR T CO
daylight, dramatically improving overall visibility
W
RAN M PA N Y
LED
BRACKET MOUNT, KIT
• Designed as a universal aftermarket LED auxiliary highbeam kit
using E-Series lights RIGID FOG LIGHT
• Full XL harness with switch included
RU
CK-LIT TR
UCK-LIT
• SAE J583 compliant fog lights project high-intensity, crisp light
A
E
E
LIFETIME
AR T CO
daylight, dramatically improving overall visibility
W
RAN M PA N Y
INTERIOR
UTILITY &
DOME LIGHTS
category pages
Adhesive Mount 44
Bracket Mount 45
• Provides robust LED white lighting solution that does not require mounting brackets or installation screws
• Light adheres directly to mounting surface with heavy-duty adhesive backing, with an easy-to-install, peel-off liner
• OmniVolt design makes the 36 Series auxiliary light perfect for any type of vehicle system
SUPER 33
• Small profile makes it ideal for interior, tool box, storage, under cabinet, and other small spaces
• Perfect for rock lights in off-road application
• Electronics are completely sealed in epoxy to resist damage caused by moisture, corrosion, shock and vibration
36205C Hardwired Hardwired .180 Bullet Clear PC Black 12|24 0.05 Side Exit
36214C Hardwired Hardwired .180 Bullet Clear PC Black 12|24 0.05 Rear Exit
36215C Hardwired Hardwired .180 Bullet Clear PC Black 12|24 0.05 Side Exit
44 truck-lite.com || (800)
truck-lite.com (800) 562-5012
562-5012
INTERIOR UTILITY & DOME LIGHTS
INCANDESCENT
• High-impact polycarbonate
construction
• Lens and housing are sonically
sealed
• 15,000 hour rated 12V bulb life
• Replaces Signal-Stat 1500W
• Utility lamp
15 SERIES
Part Lamp Lens Lens Volts Amps
Number Connector Color Material
15200C PL-10 Clear PC 12 0.33
INCANDESCENT
• High-impact polycarbonate
construction
• Lens and housing are sonically
sealed
• 15,000 hour rated 12V bulb life
• Utility lamp
19 SERIES
Part Lamp Lens Lens Volts Amps
Number Connector Color Material
19 Series Male
19200C Clear PC 12 0.33
Pin
INCANDESCENT
BRACKET MOUNT
• High-impact polycarbonate construction
• Lens and housing are sonically sealed
• 15,000 hour rated 12V bulb life
• Replaces Signal-Stat 1030W
• Utility lamp
30 SERIES
Part Lamp Lens Lens
Plug Side 1 Plug Side 2 Volts Amps
Number Connector Color Material
30200C PL-10 No Plug No Plug Clear PC 12 0.33
(800) 562-5012
(800) 562-5012 || truck-lite.com
truck-lite.com 45
LIGHT MOUNTING
LIGHT
MOUNTING
category pages
Grommet Mount 50 - 52
E
T
• Requires 94924 side entry plug AR T
Y
RAN
• Suitable for PC requirements on a 45-degree angle when
using LED or incandescent PC rated/combination lamps
• Not recommended for use with Signal-Stat LED products
• Replaces Signal-Stat 9390
RAN
• 10730 is designed for mounting grommets: #10704
and #10706
10 SERIES
CK-LIT
• High-impact plastic mount
RU
• Branch deflector cams-on 2 and 2 1/2" lamps
1 YEAR E
T
AR T
• Requires 94924 side entry plug
W
RAN
• Suitable for PC requirements on a 45-degree angle when
using LED or incandescent PC rated/combination lamps
• Not recommended for use with Signal-Stat LED products
• Replaces Signal-Stat 9390
Part Lamp
Mount Material Mount Color Plug Side 1 Plug Side 2 Kit Includes
Number Connection
Stripped End/ 10728 bracket,
10410 PC Gray PL-10 PL-10 Ring Terminal 94924 plug
10 SERIES
CK-LIT
• High-impact plastic deflector mount
RU
• Design allows surface mounting of 2-1/2" lamps
1 YEAR
E
T
AR T
• Suitable for PC requirements on a 45-degree angle when
W
RAN
using LED or incandescent PC rated/combination lamps
10 SERIES
CK-LIT
• High-impact plastic deflector mount
RU
• Design allows surface mounting of 2-1/2" lamps
1 YEAR
E
T
AR T
• Suitable for PC requirements on a 45-angle when using LED or
W
RAN
incandescent PC rated/combination lamps
CK-LIT
• Features snap-fit mount for quick installation and easy
RU
replacement
1 YEAR
E
T
AR T
• Bracket may be surface mounted
W
RAN
• Recommended mounting locations available
E
T
• Suitable for PC requirements on a 45-degree angle AR T
Y
RAN
E
T
• Provides an easy way to upgrade 2” round incandescent AR T
Y
RAN
lamps or problematic LED lamps to high quality Truck-Lite 33
Series M/C lamps
• Adapters plates utilize the same mounting holes of standard 2”
and 2.5” mounting flanges
• Constructed of impact-resistant polycarbonate for added
strength and reliability
• Flush mounts, 3/4’’ diameter lamps to vehicle with snap fit, CK-LIT
RU
no screws required
1 YEAR
E
T
• Sealing grommets secure lamps to vehicle, while assuring a AR T
W
Y
RAN
99.9 percent leak-proof seal
• Chrome-plated flange improves the appearance on vehicle
• Suitable for PC requirements when using LED PC rated/
combination lamps
• Security ring can be installed onto flange mount installations
to prevent lamps from theft (US Patent 7,572,043)
40 SERIES
CK-LIT
• Features black painted reinforced steel
RU
• Designed with 4-1/2" hole for mounting 4" lamps
1 YEAR E
T
AR T
W
RAN
1 IN X 2 IN
CK-LIT
• Designed for universal mounting applications
RU
• Features extra-strong steel construction
1 YEAR
E
T
AR T
• Intended for use with Model 15 license lamps .375 dia
W
RAN
2 IN X 6 IN
• Designed for 60 series products with
CK-LIT
RU
grommet or flange mounts
1 YEAR
E
T
AR T
W
RAN
CK-LIT
• Grommet cover features chrome-plated
RU
plastics to enhance appearance of lamps
1 YEAR
E
T
AR T
• Flange cover provides improved theft .200 dia
W
RAN
resistance of LED lamps
• Two screws required
CK-LIT
RU
• Flange cover offers improved theft resistance
1 YEAR
E
T
• Three screws required AR T
Y
RAN
E
T
• Narrow groove for panel thickness up to .125" AR T
Y
RAN
• Suitable for PC requirements on a 45-degree angle when
using LED or incandescent PC-rated/combination lamps
• Closed back versions recommended for open installation
where splash plate is not used
• Replaces Signal-Stat 9119 and 9156
E
T
• Suitable for PC requirements on a 45-degree AR T
W
Y
RAN
angle when using LED or incandescent PC-rated/
combination lamps
KIT
10 SERIES
CK-LIT • Flush mounts 2-1/2" diameter lamps
RU
RAN
• Suitable for PC requirements on a 45-degree angle when
using LED or incandescent PC-rated/combination lamps
• Closed-back versions recommended for open
installation where splash plate is not used
15 SERIES
CK-LIT • Flush mount vinyl PVC grommet
RU
RAN
angle with incandescent lamps
• Replaces Signal-State 9362
30 SERIES
CK-LIT • Flush mounts 2" diameter lamps
RU
RAN
incandescent PC-rated/combination lamps
• Replaces Signal-Stat 9139
RAN
incandescent PC-rated/combination lamps
KIT
E
T
• Suitable for PC requirements when using LED or AR T
Y
RAN
incandescent PC-rated/combination lamps
• Closed-back versions recommended for open
installation where splash plate is not used
CK-LIT
RU
1 YEAR
E
T
• Flush mounts 3/4’’ diameter lamps to vehicle with snap fit
• No screws required
AR T
Y
RAN
CK-LIT
RU
• Flush mounts, 3/4’’ diameter lamps to vehicle with snap fit
1 YEAR
E
T
• No screws required AR T
Y
RAN
• Sealing grommets secure lamps to vehicle while assuring a 99.9%
leakproof seal
• Chrome-plated flange improves the appearance on vehicle
• Suitable for PC requirements when using LED PC-rated/combination lamps
• Security ring can be installed onto flange mount installations to prevent
lamps from theft (US Patent 7,572,043)
RAN
• Benefit to OE assembly lines – smaller
NEW mounting hole to drill
40 SERIES
RU
CK-LIT • Flush mounts 4" diameter lamps in a
1 YEAR E 4 1/2" hole
T
RAN
absorbency to extend lamp life
45 SERIES
CK-LIT
• Designed for flush mounting 45 Series lamps
RU
AR T
W
RAN
60 SERIES
CK-LIT
• Flush mounts the 60 Series lamps
RU
1 YEAR • Provides lamps with additional shock absorbency to extend lamp life
E
T
AR T
W
RAN
HARNESS
SYSTEMS &
ACCESSORIES
category pages
Plugs 54 - 58
Sockets 58
Accessories 58 - 59
Conductors 59
GPT - General Purpose, Thermoplastic Insulated SXL - Standard-Duty, Cross-linked Polyolefin Insulated
> Normal resistance to heat/abbrassion > High resistance to heat/abbrassion
Number
Part Number Plug Side 2 Length Wire Type Warranty
of Wires
24”
NEW
Wire Number
Part Number Plug Side 2 Wire Type Warranty
Length of Wires
*Recommended minimum wire gauge size for stop light and ground circuits. Stop Light
Stop(Red)
Light (Red) GroundGround
(White) (White)
Single trailer (up to 50’ length) 12 Gauge
12 Gauge 10 Gauge
10 Gauge
Doubles trailer (2-28’ lengths) 12 Gauge
12 Gauge 10 Gauge
10 Gauge
Doubles trailer (2-40’ lengths) 10 Gauge
10 Gauge 8 Gauge
8 Gauge
Triples trailer (3-28’ lengths) 10 Gauge
10 Gauge 8 Gauge
8 Gauge
Cable size length of Maximum current wire resistance ohms (Ω)
gauge no. wire carrying capacity per foot SAE J560 Standards Conductor Identification
(Copper) in feet with 0.5 volt drop Wire Color Lamp and Signal Circuits
20 Ga. 10 Ft. 4.74 Amps 0.01054 Ω /ft. Wht White Ground return to towing vehicle
18 Ga. 10 Ft. 7.53 Amps 0.00663 Ω /ft. Blk *Black Clearance, side marker & license plate lamps
16 Ga. 10 Ft. 11.98 Amps 0.00417 Ω /ft.
Yel Yellow Left hand turn signal & hazard s ignal lamps
14 Ga. 10 Ft. 19.05 Amps 0.00262 Ω /ft.
12 Ga. 10 Ft. 30.30 Amps 0.00165 Ω /ft. Red Red Stop lamps and antilock devices
10 Ga. 10 Ft. 48.16 Amps 0.00103 Ω /ft. Grn Green Right hand turn signal & hazard signal lamps
8 Ga. 10 Ft. 76.59 Amps 0.00065 Ω /ft. Brn *Brown Tail, clearance, side marker lamps &
Note: This table gives you the resistance of wire per foot so with ohms law V=I x R you
identification lamps
can calculate voltage drops on any of the above wire gauges at any c urrent level Blu Blue Auxiliary/ABS power
and length. For example, voltage drop in 50 ft. 10 AWG wire with 20 amp load is
V=20 amp x (0.00103 Ω /ft.) x 50 ft. = 1.03 volts. Be sure to include both the p ositive *It is recommended to balance the circuits as practicable.
and negative leads when calculating total wire length.
16 GAUGE WIRE
.160
.011
E
Voltage Drop Per Foot
UG
67
20 G
.00
.140
GA
14 GAUGE WIRE
G
45
AU
18
.120
.0
G
E
16
UG 8
.100 GA .002 12 GAUGE WIRE
14
E
.080 UG
GA 018
12 .0
.060 E 10 GAUGE WIRE
E WIR 1
AUG .001
10 G
.040 Match the wire to the
appropriate circe size to
.020 obtain the wire’s gauge.
0 5 10 15 20 25 3 0 35 40 45 50
Wire Number
Part Number Plug Side 2 Wire Type Warranty
Length of Wires
Stripped End,Ring
94707 8in 3 GPT Lifetime
Terminal
Wire Number
Part Number Plug Side 2 Wire Type Warranty
Length of Wires
Stripped End|Ring
94993 11in 3 GPT 1-Year
Terminal
Wire Number
Part Number Plug Side 2 Wire Type Warranty
Length of Wires
Stripped End,Ring
94992 11in 2 GPT 1-Year
Terminal
Wire Number
Part Number Plug Side 2 Wire Type Warranty
Length of Wires
Stripped End,Ring
94926 11in 3 GPT 1-Year
Terminal
PLUGS
Wire Number Wire
Part Number Plug Side 2 Warranty Wire Color
Length of Wires Type
11.50”
95121 Stripped End 11.5in 1 SXL 1-Year Black
11.50”
95122 Stripped End 11.5in 1 SXL 1-Year White
PLUG, PL-10
PLUGS
Wire Number
Part Number Plug Side 2 Wire Type Warranty
Length of Wires
Stripped End,Ring
94902 7in 2 GPT 1-Year
Terminal
Stripped End,Ring
94909 12in 2 GPT 1-Year
Terminal
PLUGS
Wire Number
Part Number Plug Side 2 Wire Type Warranty
Length of Wires
Stripped End,Ring
94924 6.65in 2 GPT 1-Year
Terminal
.156 Bullet,Ring
94964 6in 2 GPT 1-Year
Terminal
Wire Number
Part Number Plug Side 2 Wire Type Warranty
Length of Wires
Wire Number
Part Number Plug Side 2 Wire Type Warranty
Length of Wires
.180 Bullet |
94718 5in 2 GPT Lifetime
Ring Terminal
E
T
• Bulb not included AR T
Y
RAN
• 18 gauge wires
• Available with black or white
194 BULB
socket
Part Compatible
Plug Side 2 Length
Number Bulbs
Stripped End /
94940 12in 194
Ring Terminal
RAN
assembly screws.
KIT
FILLER PLUG
• For use in 50 series junction box
RU
CK-LIT Part Housing
5 YEAR E Number Color
T
AR T
50830 Gray
W
RAN
50 SERIES
50 SERIES, JAM NUT
JAM NUT
CK-LIT
• Use for installation of 3-part Part Housing
RU
compression fittings in areas Number Color
1 YEAR
E
T
AR T
other than in the junction boxes 50845 Gray
W
RAN
• 1-1/8" clearance hole required
50 SERIES
2 CONDUCTOR, COMPRESSION FITTING, PVC, 0.375"
SUPER 50
CK-LIT
• 3-part fitting consisting of a Part # of Cables Material
RU
pre-tapped cap, threaded base Number Per Fitting Color
1 YEAR
E
T
RAN
available with 6 different hole sizes
to accommodate various conductor
cables
SUPER 50
CK-LIT
• 3-part fitting consisting of a pre- Part # of Cables Material
RU
tapped cap, threaded base and black Number Per Fitting Color
1 YEAR
E
T
RAN
different hole sizes to accommodate
various conductor cables
CK-LIT
• 3-part fitting consisting of a Part # of Cables Material
RU
pre-tapped cap, threaded base Number Per Fitting Color
1 YEAR
E
T
AR T
and black PVC grommet that is 50842 1 Gray
W
RAN
available with 6 different hole sizes
to accommodate various conductor
cables
MIRRORS
category pages
Convex Mirrors 61
E
T
• 5/16" stud diameter with center rod AR T
Y
RAN
• Durable, economical replacement heads
• Electrostatic-applied paint provides additional
corrosion protection
• Full vinyl gasket insulated mirror glass
2 IN ROUND
® • Eliminates blind spots
• Adhesive back mirrors will mount on
any clean flat surface
CK-LIT
• Triples viewing area
RU
• Black plastic housing
1 YEAR
E
T
AR T
• Enhances viewing area for rectangular
W
RAN
and square OEM side view mirrors
3 IN ROUND
® • Eliminates blind spots
• Adhesive back mirrors will mount on
any clean flat surface
CK-LIT
• Triples viewing area
RU
• Black plastic housing
1 YEAR
E
T
AR T
• Enhances viewing area for rectangular
W
RAN
and square OEM side view mirrors
7.5 IN ROUND
CK-LIT
• Includes L-bracket
RU
• Mounting: 5/16’’ female adjustable
1 YEAR
E
T
AR T
ball stud and bolt
W
RAN
CK-LIT
• Popular school bus convex head
RU
• Center stud
1 YEAR
E
T
AR T
• Includes L-bracket
W
RAN
• Mounting: 5/16’’ female adjustable
ball stud and bolt
REFLECTORS
& REFLECTIVE
TAPE
category pages
Reflectors 62 - 65
ReflectiveTape 65
REFLECTORS
®
Part Reflector • Permanent adhesive backing
Number Color • Mounts on any clean flat
47 Red surface
47A Yellow
47DB Red
47ADB Yellow
REFLECTORS
Part Reflector • Economical, reduced labor costs, no time
Number Color installing screw-on reflectors, molded
98175RB Red Basket reflectors
• Easy to apply – simply bend, peel and
98175R Red apply
98175YB Yellow Basket • No drilling or mechanical fasteners needed
• Meets and exceeds DOT and SAE
98175Y Yellow requirements
• Application temperature range 40 degrees
to 100 degrees Fahrenheit
REFLECTORS
Part Reflector • Fast, permanent installation
Number Color with nail, screw or rivet
98006C Clear • Designed to take extra
force in center
98006R Red • Use one #10 screw
98006Y Yellow
REFLECTORS
Part Reflector • Features acrylic lens
Number Color • Mounts with adhesive backing
98003R Red or screws
98003Y Yellow
98003RB Red Basket
98003YB Yellow Basket
ACRYLIC
Part Reflector Size
Number Color
98153 Clear 1in x 12in
98154R Red 1in x 12in
98155 Clear 1in x 11in
ACRYLIC
• Can be used as stick-on Part Reflector ®
REFLECTORS
Part Reflector • Actual size: 1.93”x4.43”
Number Color • Acrylic or polycarbonate
98001R Red reflector with adhesive backing
98001Y Yellow
REFLECTIVE TAPE
conspicuity marking tape resistant to weather, dirt,
aging and cracking
• Tough, durable film prevents lifting to look like
new, with aggressive adhesion to last long after RED|WHITE
Part Reflector application
Size
Number Color • Typically 1,000 candle power (white) for maximum
98100 White 2"x150' long side detection distance performance,
exceeding minimum requirements by four times
98101 Red|White 2"x150'
• Vivid, bright white color assures maximum
98102 Red|White 3"x150' reflectivity and superior daytime color, blending
PREMIUM
nicely with trailer skin WHITE
98104 Red|White 2"x18"
• Impact resistant, withstanding a blow from a forklift
98105 White 2"x12" or loading dock and still retro-reflects
98107 Red|White 1.5"x150' • Exceeds NHTSA and FHWA specifications
• Reflects light at all application angles on the
98108 Red|White 2"x54" roadway
98113 Red|White 2"x2' • Quick application with an easy-release liner
REFLECTIVE TAPE
• Tough, durable films resists cracking and lifting to
® look like new, long after application
• .010 thin tape with no open cell construction
• Impact-resistant, withstanding a blow from a
forklift or loading dock and still retro-reflects RED|WHITE
Part Reflector • Exceeds FHWA specifications, with DOT-C2
Size
Number Color
marking
37 Red|White 2"x150' • Reflects light at all application angles on the
roadway
CELEBRATING 65 YEARS
OF INNOVATION
AROUND THE WORLD.
MAINTENANCE
category pages
Anti-corrostion Compounds 66 - 67
Accessories 67
• Corrosion preventive compound for electrical contacts, switches and junction boxes CK-LIT
RU
• For periodic use with all electrical contact not using Fit ‘N Forget connectors
1 YEAR
E
T
• Available in a variety of sizes AR T
Y
RAN
97940 Can 8 oz
97944 Tube 2 oz
98013 Tube 5 oz
MAINTENANCE SPRAY
CK-LIT
• Quickly loosens frozen or seized parts
RU
• Invades hard-to-reach crevices and creeps through the tightest seams
1 YEAR E
T
AR T
• Displaces moisture
W
RAN
• Corrosion Control: Forms a protective thin film barrier to stop oxidation and prevent
rust from spreading
• Dissolves corrosion oxide - stops rust on contact
• Maintains lubricity under high loads for superior reduction of friction, heat and noise
• Prevents and removes corrosion build-up
• High dielectric insulation against electrolysis
• Extreme pressure lubricant
• For use on connectors including ABS, 4-13 way plugs and sockets, battery terminals
and more
• Use on fifth wheel springs and rails, glad hands, control linkages, roll-up doors, hinges
and latches, chains and pulleys and more
97946 Can 14 oz
DOCUMENT POUCH
POUCH
® • Secures documents with zipper
CK-LIT
RU
2 YEAR
E
T
AR T Part Number
W
RAN
50
DOCUMENT HOLDER
DOCUMENT HOLDER
CK-LIT
RU
1 YEAR
E
T
AR T
W
RAN
Part Number
97960
AR T
sections
W
RAN
• Precise radial closing motion/guide tracking
ensures a high-quality application
• Interchangeable crimp dies: easy and accurate
exchange and positioning of the crimp die sets
• Releasable ratchet ensures a complete crimp
process
NEW
BACK-UP
ALARMS
category pages
Bracket Mount 68 - 69
BACK-UP ALARM
• Uses multi-frequency, narrow-band technology
• Unique sound is perceived to dissipate quickly
• Encapsulated electronics extend product life - sealed in
epoxy to protect against dust, moisture and vibration
• “Narrow-band” technology
• Meets J994 Type C requirement
NEW
• Operates by emitting sound at multiple frequencies about
4,000Hz so sound dissipates more quickly than pure-tone
alarm
CUT
THROUGH
NOISE
POLLUTION
A safe
alternative
to pure-tone
alarms
Maintains a safe warning signal for those
in the danger zone of backing vehicles.
— Kenworth T680
D.O.T.
UCK-LIT
TR
A
corporate@truck-lite.com
(800) 888-7095
Customer Service
customerservice@truck-lite.com
(800) 562-5012
Technical Support
tltech@truck-lite.com
(888) 562-5012
truck-lite.com