Professional Documents
Culture Documents
Shell Tellus S3 M 68
Shell Tellus S3 M 68
Shell Tellus S3 M hydraulic fluids are high performance lubricants that use exclusive zinc-free technology to
provide outstanding protection and performance in most manufacturing and many mobile equipment operations.
They resist breakdown under heat or mechanical stress, helping to prevent damaging deposits that can decrease
the efficiency of your hydraulic system.
·
under severe or extended temperature range applications.
tests such as the Denison T6H and Eaton Vickers 35VQ25 Shell Tellus S3 M has a reduced environmental impact in the
· Eaton Vickers (Brochure 694) Shell Tellus S3 M fluids are suitable for use with most
·
other mineral oil based hydraulic fluids. However,
ASTM 6158 (HM mineral oils) mineral oil hydraulic fluids should not be mixed with
Kinematic Viscosity 0
@0 C cSt ASTM D445 990
Density @15 C 0
kg/m 3 ISO 12185 870
Pour Point 0
C ISO 3016 -33
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.