Professional Documents
Culture Documents
Catalog: For Info Rma Tion
Catalog: For Info Rma Tion
n
S p a r e p a r t s
a it o
o r m
in f
F o r
Small character ink-jet printing
it o n
r m a
in f o
F o r
Contents
General 5
n
■ Preliminary instructions / Security 7
it o
■ Recycling 9
■ How to use this catalog 10
a
Documentation 11
m
■ Documentation
r
13
f o
Keyboard Electronic compartment 15
in
■ Keyboard 17
■ Electronic compartment 18
o r
Ink circuit compartment 19
F
■ - - - Front view (1/2) 21
■ - - - Front view (2/2) 22
■ - - - Rear view 23
■ - Front view 24
■ - Rear view (1/2) 25
■ - Rear view (2/2) 26
Cabinet 27
■ Front view 29
■ Rear view 30
A36961-A.doc
3/60
Contents
Print module 31
n
■ - - General view 33
it o
■ - - General view 34
■ Exploded view (1/2) 35
a
■ Exploded view (2/2) 36
m
Accessories 37
r
■ Basic stand
o
38
f
■ Brackets 40
in
■ Alarm lights 43
■ Photocells 45
r
■ Shaft encoders 47
o
■ Anti-static brush, air blade kit 48
F
■ Head drying kit, head protection 50
A36961-A.doc
4/60
t i o n
r m a
General
i n f o
F o r
A36961-A.doc
5/60
General
it o n
r m a
in f o
F o r
A36961-A.doc
6/60
General
n
Before starting work, please read these instructions and the materials safety data sheet (MSDS)
for the consumables used.
it o
Disconnect the printer from the electrical source before opening it or changing any of its components.
a
Liability
m
Imaje shall not be held responsible if the safety instructions are not followed, nor more generally if elementary
safety rules are not applied when using and servicing Imaje equipment.
r
This equipment is certified to comply with the department of labour regulations in force on the date of manufacture.
o
Any consequences of modifications or repairs shall be the sole responsibility of the person carrying them out.
f
The same applies to use not complying with Imaje specifications.
All Imaje printers have safety labels that meet the safety standards governing printer use compliant with Imaje
in
recommendations.
Any modification carried out may be counter to printer compliance and the relevant safety standards.
Therefore, Imaje cannot be held liable for any malfunction or damage caused by any modification of the use recommended
by Imaje or for any incident arising from use of the printer for any purposes other than those for which it is designed. It is the
r
sole responsibility of the user to take the precautions required by any use to which he or she puts the printer.
o
Health / Hygiene
F
Please read the safety data sheet (MSDS) for the consumables used.
For certain consumables:
□ Wearing contact lenses when handling these consumables is strictly prohibited.
□ Ink-resistant gloves and safety goggles are recommended during filling and cleaning operations.
Max. noise level < 60 dB A.
Fire prevention
It is essential to comply with the instructions on the safety data sheet (MSDS) for the consumables used.
CAUTION: For continued protection against possible fire, use only the ink/solvent mixtures specified by Imaje.
A36961-A.doc
7/60
General
Environment
Operating temperature: On S7, S8 and 9040 lines: +5°C to +45°C (+41°F to +113°F)
On 9020-9030 printers: +5°C to +40°C (+41°F to +104°F).
n
Humidity: 0 - 90% RH with no condensation. The use of certain inks may limit the temperature and humidity ranges (see the
ink specification sheet).
it o
The printer must not be used in explosive atmospheres.
Installation
a
The printer and print head must be attached using appropriate mounting devices to ensure that they are perfectly
stable.
9040: The printer must be attached to the floor using the designated mechanism provided (4 bolts, minimum
m
diameter 6.mm, with washers, class 5.6 minimum, minimum pull-out resistance 300 daN). Nevertheless, if it is not
possible to attach the printer to the floor, the Imaje stability kit must be installed on the printer. The print heads
r
must be attached using appropriate mounting devices to ensure that they are perfectly stable.
The printer must be installed in a ventilated location, away from any source of heat, flames or sparks.
o
The printer and the print heads must be secured firmly in place with fastening devices.
f
The printer installation on the production line must not generate any risks for staff.
The operator’s work station faces the printer.
in
The printer must be connected to a single phase mains electricity network with earth ground, using the cable supplied with
the printer. The standard plug on this cable must be easily accessible.
The electrical and pneumatic installations upline of the printer must comply with applicable regulations. Machine electrical
r
specifications: refer to the specification plate located near the power receptacle (S7 and S8 lines) or inside the door near the
consumables (9020-9030 printers).
o
When the printer or a part thereof is attached to a stand, the stand must be connected to earth ground.
Earth ground all conducting parts not at a voltage reference and which are related to or close to the printer (metal frames,
F
protective guards, etc.).
For information on fastening an Imaje accessory, refer to the assembly instructions delivered with it.
Use
The printer is designed for contact-free printing by projecting ink. Any other use of the printer is prohibited, and any
consequences shall be under the entire responsibility of the user.
Consumables (inks, make-up, cleaning products, servicing products) not produced by Imaje must not be used, and any
consequences shall be under the entire responsibility of the user.
Other types of Imaje consumables should not be used without Imaje’s prior approval, and any consequences shall be under
the entire responsibility of the user.
Handling
When the printer contains consumables, it should not be tilted and should only be moved vertically. Totally drain the printer
before moving it to a non-vertical position.
Servicing
Disconnect the printer from the mains before any operations requiring components to be removed or exchanged. Use
appropriate tools for any work on the electrical and hydraulic circuits.
After each maintenance operation, the waste recepticles used should be emptied and cleaned. Do not leave rags soaked
with consumables near the printer.
We recommend that repairs be carried out only by staff who have received technical training
from Imaje.
A36961-A.doc
8/60
General
■ Recycling
The equipment described below is industrial equipment, and therefore cannot be
n
recycled or recovered as household waste but must be processed using special
methods, as shown by the symbol below:
it o
The following table indicates some of the methods available for recycling machines
when they reach the end of their life cycle. These methods are shown for guidance
a
purposes only. Other more specialized processes may be used instead of those
indicated.
r m
Please do not hesitate to contact your Imaje representative for further information.
f o
Accumulators and batteries used in the equipment must be treated using specialized
in
methods.
If the equipment is not dismantled on site, the following information must be forwarded to
r
the service-provider responsible for this operation.
o
Recycled parts Method
F
1 Stainless steel cabinet. Material 100% recyclable using any metal processing
method.
2 Containers for consumables and These items consist of plastic, metal and composite
ink circuits. materials which are impregnated with or contain ink.
Recommended method:
□ energy recovery.
A36961-A.doc
9/60
General
n
Replacement parts are available under the IMAJE Part Exchange Program.
it o
These are reconditioned parts, all worn or damaged parts have been replaced.
These parts are identified in the catalog by a specific reference prefix ENR, e.g.:
Part number
a
New Part ENMXXXXX
Replacement Part ENRXXXXX
r m
Replacement parts are available under the following conditions:
o
• a reconditioned part contains recycled components,
f
• the defective original part is returned to IMAJE and becomes the property of IMAJE,
in
• the defective original part has not been modified or damaged and no component has
been removed,
• proper use has been made of the defective original part and the maintenance
r
instructions have been complied with,
• cleaning and draining procedures for the defective original part have been followed.
F o
How to order
Orders may be sent by mail, fax or telephone. Written confirmation is required in the case
of telephone orders.
To order parts, contact the IMAJE representative.
The following information should be shown on orders for replacement parts or accessories:
part reference number, description, quantity required, required delivery date, delivery
instructions, purchase order number.
How to recognize your type of printers :
Type Usage
For wide variety of application
A36961-A.doc
10/60
t i o n
Documentation
r m a
i n f o
F o r
A36961-A.doc
11/60
Documentation
it o n
r m a
in f o
F o r
A36961-A.doc
12/60
Documentation
■ Documentation
Cdrom
it o n
This Cdrom includes the entire range of documentation for 9040, 9040 IP65, 9040
Contrast and 9040S in PDF format, i.e. User manual, Quick guide, Spare parts catalog,
Manual for serial interfaces, Instructions for accessories and space floor plans in DXF
format.
a
Part number Description
A36989 Cdrom - all languages
m
Instruction manual
o r
The Instruction Manual complies with European Directive 98/37/EC, and is translated into
f
all EU languages, as well as into Japanese, Chinese and Taiwanese.
in
Part number Description
A19919 Instruction manual - all languages
r
Catalog
F o
This catalog includes all spare parts and accessories.
Part number Description
A36960 Catalog - Accessories - Spares part - French
A36961 Catalog - Accessories - Spares part - English
A36962 Catalog - Accessories - Spares part - Spanish
User manual
This manual describes all user functions, technical characteristics and preventive
maintenance.
Part number Description
A36950 Printer manual - French
A36951 Printer manual - English
A36952 Printer manual - Spanish
A36953 Printer manual - German
A36954 Printer manual - Italian
A36955 Printer manual - Portuguese
A36956 Printer manual - Dutch
A36957 Printer manual - Brazilian
A36958 Printer manual - Chinese
A36959 Printer manual - Japanese
A36963 Printer manual - Korean
A36964 Printer manual - Swedish
A36961-A.doc
13/60
Documentation
n
This manual describes the serial and parallel interfaces
it o
Part number Description
A36980 Manual for interfaces - French
A36981 Manual for interfaces - English
a
Quick guide
m
This Quick guide describes basic functions
r
Part number Description
A36970 Quick guide - French
o
A36971 Quick guide - English
f
A36972 Quick guide - Spanish
A36973 Quick guide - Brazilian
in
A36974 Quick guide - German
A36975 Quick guide - Italian
A36976 Quick guide - Portuguese
A36977 Quick guide - Dutch
r
A36978 Quick guide - Chinese
A36979 Quick guide - Japanese
o
A36982 Quick guide - Korean
A36983 Quick guide - Finnish
F
A36984 Quick guide - Danish
A36985 Quick guide - Norwegian
A36986 Quick guide - Hungarian
A36987 Quick guide - Polish
A36988 Quick guide - Slovenian
A36995 Quick guide - Swedish
A36942 Quick guide - Czech
A36943 Quick guide - Croatian
A36944 Quick guide - Greek
A36945 Quick guide - Turkish
A36946 Quick guide - Russian
A36947 Quick guide - Bulgarian
A36948 Quick guide - Iranian
A36949 Quick guide - Arabic
A36965 Quick guide - Indonesian
A36966 Quick guide - Thai
A36967 Quick guide - Hebrew
A36968 Quick guide - Vietnamese
A36969 Quick guide - Taiwanese
A36961-A.doc
14/60
t i o n
r m a
Keyboard
o
Electronic
in f
compartment
F o r
A36961-A.doc
15/60
Electronic compartment - keyboard
it o n
r m a
in f o
F o r
A36961-A.doc
16/60
Electronic compartment - keyboard
■ Keyboard
it o n
r m a
in f o
Item
1
1
1
1
1 F o r
Part number
ENM36266
ENM36389
ENM36390
ENM36388
ENM37076
Description
Keyboard - Latin
Keyboard - Arabic
Keyboard - Chinese
Keyboard - Cyrillic
Keyboard - Hebrew
2 ENM37236 Board - backlight display converter
3 ENM36831 Ribbon cable - Bottom of mainboard / display
4 ENM37235 Display LCD
5 ENM36929 (ENR36929) Board - PC module
6 A27126 Board - PCMCIA - ATA
7 ENM36829 Flat Cable - V24/RS232 - 2 Heads
8 ENM36830 Flat Cable - V24/RS232 - 1 Head
9 ENM36801 Board - Extension - RS232 - Option
9 ENM36799 Board - Extension - Ethernet - Option
A36961-A.doc
17/60
Electronic compartment - keyboard
■ Electronic compartment
n
9 6
5
it o
8 4
r m a
o
10 7
in f
1
o r
3
F
Item Part number Description
1 ENM36610 Board - Power supply - Auto switched - 110 V-220 V
2 ENM36470 Board - Stirring motor - For
3 ENM16586 Key - Electronic compartment
4 ENM36680 Main Board - Single Jet - 1 Head
4 ENM36681 Main Board - Twinjet - 1 Head
4 ENM36682 Main Board - Single Jet - 2 Heads
4 ENM36683 Main Board - Twinjet - 2 Heads
4 ENM36684 Main Board - For
5 ENM5936 Battery - Lithium - 3V 500 mA
6 ENM14123 Safety level block
7 ENM10298 EHT block
8 ENM36790 Board - Industrial interface - With parallel interface - For 2 head printer
9 ENM36789 Board - Industrial interface - Without parallel interface - For 1 head printer
10 ENM36793 Ribbon cable - Bottom of mainboard/industrial interface
A36961-A.doc
18/60
t i o n
r m a
Ink circuit
o
compartment
i n f
F o r
A36961-A.doc
19/60
Ink circuit compartment
it o n
r m a
in f o
F o r
A36961-A.doc
20/60
Ink circuit compartment
n
20 18
it o
28
17 16
a
13
r m
14
21
o
15 9
8
f
4 12
in
5 19
3 11
10
r
23 24
1 6
9
o
7
F
2 27 25
22 26
A36961-A.doc
21/60
Ink circuit compartment
n
20 18
it o
28
17 16
a
13
r m
14
21
o
15 9
8
f
4 12
in
5 19
3 11
r
10 23 24
1 6
9
o
7
F
2 27 25
22 26
A36961-A.doc
22/60
Ink circuit compartment
■ - - - Rear view
it o n
2
1
r m a
f o
4
in
11
r
8
5
o
6
F
10
10 7
9
A36961-A.doc
23/60
Ink circuit compartment
■ - Front view
it o n
3 13
16
15 12
a
14 2
r m
9
f o
8
7
in
5
r
6
10
o
11
F
1
Item Part number Description
1 ENM6234 Ink circuit - For
2 ENM6246 Tank - Ink
3 ENM5745 Plug (x 10) - Additive/ink tank
4 ENM6256 Filter - Ink
5 ENM5553 Cartridge - Ink filter - With seals
6 ENM4485 Plug (x 5) - Draining
7 ENM4256 Screw (x20) - Stainless steel - Chc M6 x 10
8 ENM6989 Label - Ink (x 3) - Additive (x 3)
9 ENM11428 Stirring bar (x2)
10 ENM6247 Strainer - With seal
11 ENM4339 Seal (x 5) - Flat - 20 x 30 x 2
12 ENM7599 Motor - Stirring
13 ENM4337 Screw (x20) - Stainless steel - Chc M3 x 6
14 ENM7765 Filter - Coalescent - With ring
15 ENM7775 O’ring (x 4) 1/8 - (x 8) ¼
16 ENM7766 Connector (x 5) - ¼ - ¼
A36961-A.doc
24/60
Ink circuit compartment
it o n
17
1
16
2
15
a
4
3
m
19
r
10 9
6
o
18
in f
7
5
o r
13
F
12
11 14 8 10
A36961-A.doc
25/60
Ink circuit compartment
it o n
17
1
16
2
15
a
4
3
m
19
r
10 9
6
o
18
in f
7
5
o r
13
F
12
11 14 8 10
A36961-A.doc
26/60
t i o n
r m a
Cabinet
i n f o
F o r
A36961-A.doc
27/60
Cabinet
it o n
r m a
in f o
F o r
A36961-A.doc
28/60
Cabinet
■ Front view
Part number
it o n 5
a
10
1
m
6
2 7
r
9
8 11
in f o
F o r
14
13
12 4
A36961-A.doc
29/60
Cabinet
■ Rear view
Part number
it o n
1
a
3
m
10
4
o r
5
f
6 11
in
7
r
8
o
9
Item
1
2
3
4
5
6
FPart number
A35319
A35320
A35321
A35322
A35323
A35324
Description
Power cord kit - CEE standard
Power cord kit - US standard
Power cord kit - UK standard
Power cord kit - Oceanic standard
Power cord kit - Israeli standard
Power cord kit - Swiss standard
7 A35325 Power cord kit - India & South African standard
8 A35326 Power cord kit - Danish standard
9 A35327 Power cord kit - Chinese standard
10 ENM5393 Fuse (x10) - 4A - Slow blow
Connector - Plant air - 1/8G male - ¼ female - With connector
11 A16566
barbed
A36961-A.doc
30/60
t i o n
Print module
r m a
i n f o
F o r
A36961-A.doc
31/60
Print module
it o n
r m a
in f o
F o r
A36961-A.doc
32/60
Print module
■ - - General view
n
1
it o
Split electrode
a
P head (yellow ring)
r m
Flat electrode
2
f o
M head
r in
3
F o
G head Single jet Twinjet
Part number Description
For printer : ,
ENM35370 (ENR35370) Print module - Single jet - G head - 3 m - Flat electrode
ENM35372 (ENR35372) Print module - Twinjet - G head - 3 m - Flat electrode
ENM35374 (ENR35374) Print module - Single jet - G head - 5 m - Flat electrode
ENM37085 (ENR37085) Print module - Twinjet - G head - 5 m - Flat electrode
ENM35373 (ENR35373) Print module - Single jet - G head - 8.35 m - Flat electrode
ENM37086 (ENR37086) Print module - Twinjet - G head - 8.35 m - Flat electrode
ENM35371 (ENR35371) Print module - Single jet - M head - 3 m - Split electrode
ENM36400 (ENR36400) Print module - Twinjet - M head - 3 m - Split electrode
ENM35375 (ENR35375) Print module - Single jet - P head - 3 m - Split electrode
Options ● Specify the conduit angle : 0° or 90° or 180° or 270°.
Item
1 A37429 ● Option - 5 m angled conduit - G head
1 A37430 ● Option - 8 m angled conduit - G head
2 EN6266 ● Option - Angled head - 3 m, 5 m, 8 m - G head - M head
3 A37429 ● + EN6266 Option - 5 m angled conduit - Angled head
A37432 Option - Flat electrode - Single jet - M head for 5139 ink
A37433 Option - Flat electrode - Twinjet - M head for 5139 ink
A36961-A.doc
33/60
Print module
■ - - General view
Split electrode
it o n
r m a Flat electrode
o
M head
in f
o r
Twinjet
F
G head
Single jet
For printer
ENM36872 (ENR36872) Print module - Twinjet - M head - 3 m
NOTE: When ordering a print module, please specify the part number of the ink
used. Please order the required options when you order the print module.
A36961-A.doc
34/60
Print module
it o n
1
9
1 2 18
10
a
3
4 3
r m
11 18
o
2
f
12 17
in
15
6
8
r
13 3
5 7
o
19
16
F
14
A36961-A.doc
35/60
Print module
it o n
1
9
1 2 18
10
a
3
4 3
r m
11 18
o
2
f
12 17
in
15
6
8
r
13 3
5 7
o
19
16
F
14
A36961-A.doc
36/60
t i o n
r m a
Accessories
in f o
F o r
A36961-A.doc
37/60
Accessories
■ Basic stand
space plan
it o n
812m
60 x 60 mm m
a
m
0m
60
r m
1731mm
Ø 40 mm
1400 mm
o
45 x 45 mm
in f
o r
37
m
0 mm 564m m
m
.1
F
3
59
1 inch = 25.4 mm
A36961-A.doc
38/60
Accessories
it o n
7
a
5
r m
4
10 11
f o
6
in
8
3
Item
1
2
3
4 F o r 1
Part number
A17641
A28473
EA28453
EN6450
2
Description
Stand - aluminium - Complete (includes 3,4,5,6)
Stand - Stainless steel - Complete (includes 3,4,5,9,10,11)
Ground strap (x 10 m)
Maintenance tray
5 EN10013 Head support - Servicing position
6 A17974 Head support - Aluminum steel stand - With rotation
7 EN5343 Fasteners and clip - Conduit
8 EN6706 Support - Ground strap
9 A34798 Mounting bracket - Head support - Servicing position
10 A28457 Mounting bracket - Maintenance tray
11 A36925 Head support - Stainless steel stand - With rotation
A36961-A.doc
39/60
Accessories
■ Brackets
it o n
2 1
5
4
a
3
r m
11
o
6
in f
r
7
o
8 9 10
F
Item Part number Description
1 EN5915 Head mounting kit - 2 axis precision adjustment
2 EN5914 Adaptater kit - Round rod to profile
3 EN4735 Head bracket - 2 axis precision adjustment
4 EN6231 Head bracket - Angled head - Servicing position
5 A14806 Head bracket - Horizontal head
6 EN6230 Head bracket - Angled head - Fixed position
7 EN10012 Head bracket - 1 axis precision adjustment
8 ENM7329 Head bracket - Long
9 EN4768 Mounting kit - Second head
10 A11188 Nut
11 EN6637 Head bracket - Retractable
A36961-A.doc
40/60
Accessories
it o n
2
4
r m a
f o
1
r in
3
5
Item
1
2
3
4
5
F o
Part number
EN6163
ST1123
EN6450
EN6051
A37431
Description
Head bracket - Wall - Servicing position
Bracket - Wall
Maintenance tray
Marking table
Stability kit - Trolley
A36961-A.doc
41/60
Accessories
■ Alarm lights
Dimensions
it o n
30 mm
a
23 mm
21.5 mm
80 mm
10 mm
m 10 mm
Ø30 mm
o r
35
f
A (mm)
13.1 mm
in
2 elements 300
Support en L
A
6.2 mm
3 elements 335
220 mm
L bracket
r
39.9 mm
38 mm
o
80 mm
F
17 mm
3000 mm
6.2 mm
Technical specifications
LED module Current consumption Red – Orange : 30mA / Green – Blue – White : 25mA
[1-light] Contact capacity Is ≥ 50mA VS ≥ 35 VAC
Current consumption 200mA (MAX)
Supply
Contact capacity Is ≥ 200mA Vs ≥ 35 VAC
A35262-C.doc
42/2
Accessories
it o
4
n
m a
2
f o r
in
3
Item
1
2
3
4 F o r
Part number
A36285
A34791
A34792
A28466
Description
Alarm - Audible - 24V
Alarm - Illuminated - 24V - 2 elements (Red / Orange)
Alarm - Illuminated - 24V - 3 elements (Red / Green / Orange)
Mounting kit - Alarm
A36961-A.doc
43/60
Accessories
■ Photocells
Dimensions
Reflex photocell
it o n
r m a
Proximity photocell
17 32
7
in f o
Fiber optic
r
Unit : mm
1inch = 25.4 mm
F o
Technical specifications
Proximity
Reflex photocell Optic fiber
photocell
Ajustable range 0 –1,70 m 0 -200 mm 0 -55 mm
Current consumption ≤ 35 mA ≤ 30 mA
Case material Nickel platted brass Nickel platted brass Chrom platted metal
A35262-C.doc
44/3
Accessories
n
3
it o
6m
1 4
a
2
m
7
o r
3
f
6
in
Ø 18.5mm
1m
37mm
r
5 Ø 6.5mm
37
o
mm
m
F
.5m
1 inch = 25.4 mm
29
A35262-C.doc
45/3
Accessories
■ Shaft encoders
Dimensions
it o n
Cable Lg 5 m
a
M12 male 5 pins
o r m
in f
Programmation switch accessibility
(A35452 only)
r
Dimensions in mm – 1 inch = 25.4 mm
Mechanical specifications
o
Cover : zinc alloy
F
Material Body: aluminium
Shaft : Stainless steel
Axial : 50 N
Maximal loads
Radial : 100 N
Acceleration
5 2
Max 1.10 rad.s-
Continuous speed Max 9000 tr/min (rpm)
Weight 300 g
Relative humidity 98 % (without condensation)
IP (EN 60529) IP 65
Cable length 5m
Electrical specifications
A35356 A35452
Supply 5 to 30 VDC 5 to 30 VDC
Consumption 75mA 75mA
Intensity per channel 40mA 40mA
Protection against short circuits yes yes
Protection against reverse polarity yes yes
Operating temperature -30°C to 100°C -30°C to 70°C
Resolution 5000 pulses/rev 2500 to 40000 pulses/rev
A35262-C.doc
46/3
Accessories
it o n
1
5
a
6
m
4
f o r
in
7
r
2
F o
3
A35262-C.doc
47/3
Accessories
n
Certain printing applications, such as blister packs, plastic film or cables, can produce
it o
electrostatic charges that may disperse the drops ink, which will reduce print quality. Use
an anti-static brush to prevent this.
The brush, which is 70 mm (2.76 in.) long, is mounted crosswise 50 mm (1.97 in.) in front
a
of the head. It should never be more than 1mm (0.04 in.) from the object and should
preferably be in contact with the object. It must also be grounded.
m
Air blade kit
r
The air blade is used to dry:
□ The substrate prior to printing,
f o
□ The ink after to printing.
Blades are available in two lengths: 6” (153 mm) and 18” (457 mm).
in
The space between the blade and the object may be adjusted (between 0.4 and 2 in.)
(10 and 60 mm).
r
The air blade kit includes the blade, filters and a bar to remove the head and couplings
o
necessary for installation.
The connector on the kit’s inlet is ½” G female or ½” BSP 10 mm.
F
Use the cross-shaped bars to attach the air blade to the Imaje stand.
Check your plant air for the following characteristics:
□ 6” blade (153 mm): air flow and pressure at the kit’s input must be at least 300 l/min.
(10.5 scfm) at 1.8 bar (26.1 PSI)
□ 18” blade (457 mm): air flow and pressure at the kit’s input must be at least 800 l/min.
(28.25 scfm) at 1.8 bar (26.1 PSI)
□ Pressure at the kit’s input must be at least 3 bar (43.5 PSI)
□ Operating temperature must be between 14°F and 167°F (-10°C and +75°C)
□ The air must be clean, dry and oil free. It must contain at the most: 0.12 grams of
water/m3 (0.15 once of water/cubic foot), 1PPM of oil and size of particle <5 µm.
A36961-A.doc
48/60
Accessories
Part number
it o n
a
1
o r m
in f
r
5 3
4
o
2
F
6
A36961-A.doc
49/60
Accessories
it o n
65 mm
a
147,5 mm
r m
5
f o
1
o r in
F
4
A36961-A.doc
50/60
t i o n
Safety parts
r m a -
o
Tools -
i n f Options
F o r
A36961-A.doc
51/60
Safety parts – tools - options
it o n
r m a
in f o
F o r
A36961-A.doc
52/60
Safety parts – tools - options
■ Safety kit
Part number
3
4
it o n
a
2
o r m
in f
5
6
r
7
Item
1
2
F oPart number
A17538
A17955
1
Description
Safety kit (includes 2,3,4,5)
Referenced materials in the safety kit may be ordered separately
Safety glasses
Eye wash - Hand held
Eye - Cup - Individual
5 ENM4491 Gloves (x 20) - Latex
Hand cleaner - Liquid - 125 ml
7 A20872 Tee shirt - Black - Imaje - Size M
7 A20873 Tee shirt - Black - Imaje - Size L
7 A20874 Tee shirt - Black - Imaje - Size XL
7 A20875 Tee shirt - Black - Imaje - Size XXL
A36961-A.doc
53/60
Safety parts – tools - options
■ Tools
Part number
it o n
a
4 5
m
2
r
3
o
12
f
6 10
in
13 9
8
7
14
o r
11
Item
1
3
4
5
F Part number
A27831
A10413
A11007
ENM6317
Description
Suitcase-user
Referenced materials in the suitcase-user may be ordered separately (see list below)
2 A17955 Safety glasses
Magnifier - Magnification x12
Beaker - 250 ml
Cleaning flask
6 A10864 Head dryer
7 Allen wrench - 3/32”
8 A18631 Allen wrench - 2 mm
9 Allen wrench - 1.5 mm
10 Connector - Ringed - M6 - 1/8 - Teflon
11 A12027 Screwdriver - 2.5 x 50
12 ENM5932 Adjustment tool - Cannon - Punch - Ø 0.95
13 Screwdriver - Flat 1.5 - Cannon holder cam
14 ENM14434 Wrench - Cannon - Hexagonal key - 5mm
A36961-A.doc
54/60
Safety parts – tools - options
■ Options
Description
n
9040 printers offer specific operating modes which can be obtained by selecting options.
it o
The performance of 9040 printers may be increased by adding options.
a
Changes the message to be printed via a parallel interface. This option requires the
parallel interface option.
m
The printer automatically selects the next message in the library and then prints it.
r
2 - Message inversion option
o
The “D7” input on the industrial interface is used as a reverse direction command for
f
the message. This option requires the parallel interface.
in
Installation
r
Your Imaje representative will install the options on your printer.
F o 2
A36961-A.doc
55/60
it o n
r m a
in f o
F o r
A36961-A.doc
56/60
12/ 2003
05/ 2005
Revision 11/
03/
2006
2007
05/ 2008
Catalog 9040 Range
Manual’s update
n
• Mod. let. A corresponds to the first edition of this manual.
it o
• The mod. letter changes with every modification.
a
10/2006 A J05/M05
o r m
in f
F o r
This document was produced in French. The French version is deemed to be the only official version and shall constitute the authentic
document in the event of any dispute. Imaje reserves the right to change the technical characteristics of its products without prior notice.
Reproduction of this document is prohibited, either in full or in part.
Photos and drawings are not binding.
Edition anglaise.
A36961-A.doc
57/60
it o n
r m a
in f o
F o r
it o n
r m a
in f o
F o r
it o n
r m a
in f o
F o r User Documentation Department – Imaje S.A.
Imaje S.A.
Headquarter :
9, rue Gaspard Monge
BP 110
26501 Bourg-lès-Valence Cedex
France
Tel.: (33) 04 75 75 55 00
A36961-A Fax: (33) 04 75 82 98 10
http:// www.imaje.com