Professional Documents
Culture Documents
BoWex® curved-tooth gear couplings are flexible shaft connections for a positive
DESCRIPTION
torque transmission and specifically suitable to compensate for axial, radial and
angular shaft misalignment. According to the well known effect of curved tooth gear
couplings, any edge pressure in the spline in case of angular and radial displacements
is avoided so that BoWex® couplings are the most free from wear during their operation.
*Note: For a complete coupling, two Hubs and a Sleeve must be selected.
DIMENSIONS
L011436
4985 East Landon Drive Anaheim, CA 92807 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
Inch Bores
Outside Length Thru Coupling
Bore
Keyway Diameter Bore Length
Item Diameter Material
(in) (in) “l1, l2” “L”
(in)
(in) (in)
KTR-BA010422061903 3/4 3/16 3.62 1.65 3.46 Sintered Steel
Metric Bores
Outside Length Thru Coupling
Bore
Keyway Diameter Bore Length
Item Diameter Material
(mm) (mm) “I1 I2” “L”
(mm)
(mm) (mm)
KTR-BA010422062001 20 6 92 42 88 Sintered Steel
Sleeve
Rated Mass Moment of
Type/ Rated Power Max. Power Max Torque Max. Speed
Item Material Torque Inertia
Design (HP) (HP) (in-lb) (rpm)
(in-lb) (lb-in-sec^2)
4985 East Landon Drive Anaheim, CA 92807 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
Axial Misalignment Parallel Misalignment
Misalignments
BoWex® Size 42
4985 East Landon Drive Anaheim, CA 92807 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com