Professional Documents
Culture Documents
051/1
Accessories
0035465 000 Brass throttle screw for damping pressure surges
0214120 000 Stainless-steel throttle screw for damping pressure surges
0192700 000* 1 m of copper capillary tubing for damping pressure surges
0114467 000* 1 m of stainless-steel capillary tubing for damping pressure surges
0192222 000* Cap nut with solder connector
0311572 000* Brass screw fitting for copper tubing of Ø 6 mm
0259239 000* Brass reduction piece G½ onto 7½ " 20 UNF-2A for copper tubing of Ø 6 mm
0259983 000* Fixing bracket for rail mounting: C-rail EN-50022-C20 and C30
0296936 000* Fixing bracket for rail: top-hat rail EN 60715, 35 × 7,5 or 35 × 15
0259984 000* Bracket for 3-point fixing
0292018 001* Damping screw for damping pressure surges in low-viscosity media
*) Dimension drawing or wiring diagram are available under the same number
1) At a load of < 500 Ω, the transducer switches automatically to 0...20 mA (or 4...20 mA).
Factory setting is 0...10 V. Output is protected against short circuits and over-voltage up to 24 V~.
Operation
The pressure in the sensor acts on a bourdon tube, thereby producing a force on the conversion
spring. The resultant movement is converted into a standard electrical signal by an inductive distance
sensor. The output signal rises in proportion to the pressure.
Additional details
Materials which come into contact with the medium are:
brass, stainless steel and the seal's nitrile rubber (on the brass pressure sensor);
stainless steel (on the stainless-steel sensor) material no. 1.4104 and 1.4541.
To protect the DSU with a fuse, a fuse of at least 250 mA/250 V should be used.
Additional technical data
Complies with:-
EMC directive 2004/108/EC EN 61000-6-1/ EN 61000-6-2
EN 61000-6-3/ EN 61000-6-4
Covered by Art. 3.3. of the PED without safety function
Wiring diagram
Auto U/I
⊥
0/2...10 V
0/4...20 mA
1 2 3
24 V~/=
A05045b
xi
Dimension drawing
45
80 50 25
3
61
67
a
10
Pg11
Ø4,5 67
s
6 28
G1/2A
Type a s
DSU 101...103 131 36
DSU 106...125 146 27
DSU 201...210 131 36
DSU 216...225 109 22
M05046
Accessories
114467 192222 311572
192700 G1/2 G1/2 25,5
s27 8
s22
Ø6
G1/2
42,5
Ø26
1000
NW 1.0 (192700)
NW 1.5 (114467) s27
M00777
Ø 12
M00317a
R1/2 M00316a
30
32
40
18
13
s27
25
4,5
7/16"
20-UNF-2A M00653
12
M00315
0,
5
13
18 M00166
259984 292018
20
1,5
M4
4,5
Ø1,58
Ø0,38
4,5 7,5 s5
M3×6
11
25
37
25
10
M04566
9 3,5
58
M00654
Printed in Switzerland
Right of amendment reserved
N.B.: A comma between cardinal
numbers denotes a decimal point
© Fr. Sauter AG, CH-4016 Basle
Sauter Components 7133051003 04