Professional Documents
Culture Documents
PRIMCO
Introduction
This is one of a series of prepregs developed for applications requiring both good mechanical
properties and low heat and smoke emission. These prepregs have qualified for aircraft interior
components such as overhead lockers and galley panels.
Composition
This prepreg is based on a 285-gsm twill glass fabric and is impregnated with resin mix 283 to a
nominal 46% resin content. It finds applications in non-visible surface areas where the surface finish
can be sacrificed for the lower cost. The construction of the fabric is as follows:
Style 2 x 2 Twill
Weight 285 gsm Nominal
Warp EC9-68 x 3 7 per cm
Weft EC9-68 x 3 7 per cm
The resin used is a proprietary, modified phenol formaldehyde resin having good adhesion to
honeycomb when cured as recommended. The prepreg has medium tack, but this could be changed
to suit the customer and application.
Cure Schedule
Release pressure.
Alternatively the laminate may be press or oven cured using the above temperature cycles.
________________________________________________________________________________________________
MS Dec-03 Primco Limited Page No 1 of 2
Tel: +44 (0) 161 653 4876 email: Sales@primco.co.uk Fax: +44 (0) 161 655 3673
Whilst the information is given in good faith, no guarantee is made, nor can Primco accept any liability of any kind to any person in respect of its contents, or any use made thereof, nor must it be assumed that any such use will not infringe any patent.
...........Continuation of Technical Data Sheet
________________________________________________________________________________________________
Mechanical Properties
Sandwich Panel
________________________________________________________________________________________________
MS Dec-03 Primco Limited Page No 2 of 2
Tel: +44 (0) 161 653 4876 email: Sales@primco.co.uk Fax: +44 (0) 161 655 3673
Whilst the information is given in good faith, no guarantee is made, nor can Primco accept any liability of any kind to any person in respect of its contents, or any use made thereof, nor must it be assumed that any such use will not infringe any patent.