20 Questions
To Ask Yourself Before
You eae a Koi Pond
Presented by
SacramentoKoi.com
(916) 652-4231
?20 Questions to Ask Yourself Before
You Build a Koi Pond
Presented by SacramentoKoi.com
Introduction
Most people would agree that few things add more to an
attractive landscape than a beautiful, well built koi pond. The
growing popularity of koi ponds today is do to the fact that
they add not just beauty to a setting, but also a sense of
serenity. The sight of brightly colored koi, gracefully swimming
ina clear body of water, coupled with the soothing sound of
a gentle waterfall is hard to forget.
‘The problem is that most people do not realize that building
a successful koi pond is much more complicated than they
think. Many people start out thinking that to build a koi pond
all they need to do is provide a hole in the ground that will
hold water for the koi to live in. The reality is that unless the
koi pond is well thought out and properly designed, the whole
experience can be a real disappointment. A successful koi
pond needs to be designed and constructed with the following
three principles in mind.
1) Asuccessful koi pond needs to provide healthy crystal
clear water, So much of the enjoyment of a koi pond is
being able to clearly see the beauty of the koi. A pond
that is not crystal clear will rob you of this feature.
2) A successful koi pond needs to provide a safe environment for the koi. Poorly designed koi ponds can make
it easy for predators to injure or kill your koi. A properly designed koi pond will not require a net to protect
the koi.
3) A successful koi pond needs to be as easy as possible to maintain. Often times the maintenance issue is not
even considered until after the pond is built. A poorly designed koi pond can be so hard to maintain that it can
ruin your whole koi keeping experience.On the other hand, a well designed and built koi pond, can be amazingly
easy and enjoyable to maintain. You can build 2 10,000 gallon koi pond that requires less than 5 minutes a week
to maintain and you can maintain it without getting dirty.
The following 20 questions are designed to help you in planning and designing your new koi pond so that the
finished pond will be exactly what you envisioned when you started.
20 Questions to ask yourself before you build your pond.
1) How large should I make my pond?
2)Where should | place my pond?
3) Can | grow plants in my pond?
4) Which pond is better, rubber liner pond or a concrete pond?
5) How importants the shape and contour of the pond?
6) How deep should | make the pond?
7) How importants the filter?
8) How far away from my pond can | install my filter system?
Page120 Questions to Ask Yourself Before
You Build a Koi Pond
Presented by SacramentoKoi.com
9) Do Ineed a pre filter?
10) What size pump will Ineed?
11) What size pipe should | use?
12) How importants it to have a bottom drain?
13) How important is it to have a skimmer?
14) How important is it to have jets?
15) How important is it to have an auto-fill?,
16) Do | need to install an ultraviolet light?
17) Should | install under water lights in my pond?
18) Should | install an automatic feeder on my koi pond?
19) How many koi can | put in my pond?
20) What should I look for when selecting someone to build my koi pond?
1) How large should | make my pond?
One of the most common mistakes people
make with their first pond is that they build it
too small. The smallest koi pond we recommend
building is 1500 gallons, which would be
approximately 7 feet wide by 8 feet long and 4
feet deep.
That may sound huge to many beginners, but
most people who already have a koi pond will
agree that if you build a pond much smaller than
that, in time you will not be happy with it. The
problem is that koi are extremely addictive and it
is hard to be content with just a few. Also, keep
that you may start out with several 6 inch
ong koi, but within 3 or 4 years they could grow
to 24 inches or more. Most people, after a while, wish they had made their first pond bigger. On the other
hand, you can also make your pond too big. Bigger is not always better.
The largest pond we recommend building is 15,000 gallons, which would be approximately 17 feet wide by
21 feet long and 6 feet deep. If you build a pond much larger than that you run into several problems.tn a very
large pond it can become almost impossible to catch the fish
if you need to. It can also be very expensive to medicate the
pond if that becomes necessary. Additionally, all the water in
the pond will need to be filtered at least once every three
hours. Running pumps large enough to accomplish this can
cost several hundreds of dollars per month.
Finally, if you build the pond too large you may not enjoy
the koi as much, because in a very large pond the koi are not
always visible.
Page 220 Questions to Ask Yourself Before
You Build a Koi Pond
Presented by SacramentoKoi.com
2)Where should I place my pond?
There are several things to consider. First, koi ponds do better in a shaded area than in full sun. Full sun will
work, buta shaded area will generally slow the algae growth down and will prevent the water from possibly getting
too hot during the summer months.
If you chose to build in a sunny area, it might be practical to think of building some type of arbor, either now or
in the future, to give your pond some shade. Unlike a swimming pool, leaves from trees near the pond should not
create a problem if the pond is properly designed.”
In many areas local building codes require any pond deeper than 2 feet be within a fenced in area, which could
present a problem if you want to build itin your front yard. Once you have chosen a general location for the pond,
we recommend you use a garden hose to outline the exact location, size and shape of the pond. This can be
extremely helpful in giving you a better idea of exactly how the pond will look. After placing the hose where you
plan to build the pond, stand back and examine it from several locations and ask yourself. Will it be the size pond
that | want? Will it be as visible as | would like it to be from, say, the back deck, the kitchen window or from
wherever | would like to be able to see it? Keep in mind, this pond will most likely be the central feature of your
whole landscaping.
Once you have the general outline shape of the pond established you can get an approximate idea of how
many gallons it would be by multiplying the (average length) x (average width) x (average depth) x (7.5
gallons per cubic foot). Also you may use our on-line Pond Planning Calculator to help you out.
“One note of caution: Pine trees are the one exception. Pine needles tend to create a real mess in a koi pond. Unlike
leaves, needles can travel through the skimmer basket and the leaf basket on the pump and end up in your pump impeller.
If possible, do not build a koi pond near a pine tree. Redwood trees, although messy, are not near the problem pine
trees are.
3) Can | grow plants in my pond?
‘Adding plants to your koi pond can be very beautiful but at the
same time they can realy complicate things.
Here is why:
If you place shelves in the pond to support the plants and
the shelves are less than 2 feet deep, you risk the chance of
loosing your koi to predators. Even if the shelves are deeper
than 2 feet below the water level you may still have a problem.
If,for instance, you place a potted plant on the shelf and the
top of the pot is less than 2 feet from the pond surface a blue
heron may wait until a fish swims over the pot and then strike,
pinning the fish against the plant pot.
Page320 Questions to Ask Yourself Before
You Build a Koi Pond
Presented by SacramentoKoi.com
‘Most water plants do not like water movement so you cannot use jets in the pond. Therefore, most of the leaves
that fall in the pond will sink to the bottom before they reach the skimmer and may have to be netted out by
hand.
Often times new plants will have parasites on them so you will need to treat them with potassium permanganate
before you introduce them to the pond.
If parasites do get into your pond you will need to treat the whole pond. Most chemicals used to treat for parasites
in koi ponds are toxic to plants. This means you will need to remove all the plants while you treat the pond.
Additionally, you will need to treat the plants separately before you return them to the pond.
One of the more effective ways to combat string algae in a koi pond is to increase the salt level in the pond to
.4%.This is not an option when you have plants in the pond because, most plants cannot tolerate saft at this level
and will die,
‘Once koi get to be 12 inches or larger they begin to eat most plants.
Most pond plants begin to die back in the fall and create a real messin the pond.
Koi can hide under the pond plants and this can create a potential problem. Ifa koi gets sick and begins to
isolate itself, you may not notice it until itis too late. Plus, if you need to catch a koi for any reason it can bea real
challenge, if not impossible, trying to catch them among all the plants.
Some people will argue that you must have plants in the pond because the plants are necessary to consume the
nitrates that build up in the pond. That would be true if it weren't for all the algae that naturally forms in a pond.
Ahealthy pond will normally develop a 1/2 inch layer of
green algae on all the inside walls of the pond. This algae,
which feeds on nitrates just like pond plants do, is usually
more than sufficient to keep the nitrates at a safe level.
A pond with plants in it can be very attractive, but so can
a well landscaped pond which has beautiful plants
surrounding it, yet with none actually in the pond. Tom
Holder (owner of Koi Care Kennel) built this pond with
the Advantage System on it and with no plants in the
pond. He has a healthy pond that is both beautiful and
easy to maintain.
4) Which pond is better, a rubber liner pond or a concrete pond?
They both have their own advantages
Aconcrete pond is more permanent than a liner pond. This can be a real advantage if the pond is designed
and built properly but a real nightmare if it is not. The inside contour can be built so the pond has smooth
flowing walls leading from the top to the bottom drain. This can make the bottom easier to keep clean. Many
professional pond builders prefer to build concrete ponds because they can draw professional help from the
Page420 Questions to Ask Yourself Before
You Build a Koi Pond
Presented by SacramentoKoi.com
pool industry to install the rebar and gunite or shotcrete. Finding qualified people with a lot of experience
installing liner ponds is hard. In general itis easier to install
rockwork on a concrete pond compared to a liner pond if
you want the rockwork mortared in place. Liner
Construction
‘The disadvantage of a concrete pond is that they cost more
to build. This added expense may be off set to some extent
when you consider the value a well built pond may add to
property value, Most bank appraisers consider a concrete
pond similar to a concrete swimming pool, whereas, they
consider a liner pond similar to a portable pool which has,
less value. An additional disadvantage of a concrete pond
is that for the first three to five years they tend to have a
higher than normal ph. Ifa high ph is of concern to you this
can easily be overcome by letting the concrete cure and then coating the pond surface up to the water line with
an epoxy.
‘A.45 mil rubber liner pond is not as permanent, which can actually be a benefit. If the pond has some desi
flaws that you need to change or if you need to remove the pond, a rubber liner is much easier to work with.
This s a big reason most "do it yourself" pond builders choose a liner pond over a concrete pond. liner pond is
also less expensive to build and a liner pond tends to maintain a more neutral ph. The rubber liner creates a very
soft surface for the Koi but even when a liner pond is installed properly you will have a number of minor folds
in the liner surface.
Once the pond is filled with water these folds become
barely visible. Rock work around the edge ofa liner pond
can bea challenge if you don't want the liner to show. The
reason is because the rock work will need to extend down,
into the water and the mortar for the rock work will not stick
to the liner. (To solve this problem see “Advantage Pond
Design Plans” under “Rock Work")
Concrete
Construction
The problem of cutting a hole in a liner for the bottom
drains, jets, etc. is easily overcome with the proper drains
and bulkhead fittings. When installed properly a liner pond
can easily be leak free for many years.
5) How important is the shape and bottom contour of the pond?
The shape of the pond is much more important than most people realize. Many
times people will get very creative with the pond shape so that it rambles all around
the landscape and ends up looking like a piece of a puzzle. Only after the pond is
built and filled with water does the problem become apparent. You can't keep it
clean. If the pond is shaped so that it has dead areas where the water is not moving,
leaves and debris will collect there and eventually sink.
Page 5 ‘Avoid making a "Puzzle" shaped pond20 Questions to Ask Yourself Before
You Build a Koi Pond
Presented by SacramentoKoi.com
Additionally, the bottom contour of the pond is equally important. Flat bottom ponds require constant
vacuuming to keep them clean. If you are retired and have two hours each day to clean your pond you can build
it any shape you wish. On the other hand, if you want to build a pond that is almost “self cleaning’ pay close
attention to both the shape of the pond and the inside contour leading from the edges of the pond all the way
to the bottom drains. We can't express enough how important the contour of a koi pond is. A well designed pond
shape and contour can save you many hours of back breaking work and help provide a healthier environment
for the koi. See the “Advantage Koi Pond Plans" for more details on pond shape and bottom contour.
———————
Bottom Contour
6) How deep should I make the pond?
A serious koi pond should be at least 3 feet deep and no areas.
should be shallower than 2 feet. Any areas shallower than 2 feet is an
‘open invitation to dinner for both blue herons and raccoons.
If you don't think you have predators in your neighborhood just
build a shallow pond and watch what happens! Even a single safety
step to help you get out of the pond, that is less than 2 feet deep,
can cost you most of your fish. Also, all sides should go almost
straight down, not tapered. Aquascape" type ponds where the sides
of the pond gently taper in toward the bottom will not work for a
koi pond.
Even if you build a’deep area” with a cave in it for them to hide in,
you are still not safe. Blue herons will wade out into the water,
stand perfectly still for hours if neccessary, and simply wait for the koi to come
out and then strike. Do not place shelves for plants in the pond. We suggest if
you want to put plants in your pond that you hang potted plants over the side
with wires or stack blocks in the pond to support them. That way if you start
having problems you can simply remove them.
Page 620 Questions to Ask Yourself Before
You Build a Koi Pond
Presented by SacramentoKoi.com
Ifyou decide to ignore this advice you will probably (after loosing several of your favorite fish) end up covering
your pond with a net or in one case, we saw 1/2 inch rebar used to keep out raccoons.
Most people would agree that a beautiful pond is somewhat ruined when it has to be covered with something
to protect the fish. A deep pond with steep sides is the best defense against predators. Also, koi get their exercise
by swimming up and down in a pond rather than horizontally. The constant change in water pressure helps koi
develope a proper contour or shape. Note, if you plan on growing "jumbo koi" you will need to build the pond
at least 6 feet deep.
7) How important is the filter?
‘The filter is the heart of your koi pond. The filter is what
keeps the water clear and healthy for the fish. Many ponds
have failed because the owners spent all their money on a
beautiful pond and tried to save money on their filter.
The filter serves two purposes.
One, it serves as a mechanical filter removing fish
waste and anything else in the pond that would cloud
the water.
Two, it serves as a biological filter by converting the ammonia
produced by the fish into nitrites and eventually into nitrates which,
in general, are harmless to the fish.
Some filters can be very high maintenance requiring constant attention while others can be very easy to
maintain. The Advantage Bead Filter by Sacramento Koi is designed to serve as both a mechanical and a
biological filter at the same time, plus it is extremely easy to maintain. The Advantage Filter is also the only filter
on the market today that offers a factory "One Year Satisfaction Guarantee." "If,for any reason, during the first
year you are not completely satisfied with the Advantage Filter, Sacramento Koi will buy it back and even pay any
shipping expenses." The Advantage filter is also a pressurized filter. That means that you can install it above or
below the level of the pond water and up to 300 feet away from the pond. This can be a real advantage when
designing your koi pond if you wish to have the filter system out of sight.
It is well established that when it comes to selecting a filters "You can never have too big a filter." So,
when choosing a filter, selecting a filter that is slightly oversized for your pond can be a very wise investment.
8) How far away from the pond can | install the filter system?
How far from the pond can you place the filter depends to some extent on what type of filter you have.
A box type gravity flow system will require the water to gently flow into and out of the filter using gravity to
move the water in at least one of the directions. For this to happen, the filter will need to be placed relatively near
the pond and ata specific height in relation to the pond level.
Page720 Questions to Ask Yourself Before
You Build a Koi Pond
Presented by SacramentoKoi.com
With a pressurized filter such as the Advantage Bead Filter, you have much more versatility because it is
pressurized and not dependant on gravity. That means, the filter can be installed some distance from the pond
making it easier to hide. For long runs from 50 feet to 300 feet, the diameter size of the pipe traveling to and from
the filter may need to be increased, up to 3 inches, depending on the size of the pond. With the proper sized pipe,
to reduce the friction loss in long runs, the filter system will operate almost as efficiently as it would if it were next
to the pond.
9) Do Ineed a pre-filter?
A pre-flter is designed to collect solid material such as leaves, fish waste and string algae before they get to
your filter.In some small ponds, the pump and skimmer baskets may be sufficient. The larger the pond, the more
debris will be produce, therefore, the more important they become. Pre filters are especially important if you have
a filter that is hard to clean such as a gravel type filter, because you usually are only cleaning them once or twice
a year. The more waste you can keep out of them, the less often you will have to clean them. Pre filters are not
nearly as important with a good bead filter because it is so easy to remove the waste from the filter whenever
necessary.
There are basically 3 types of pre filters:
A simple holding tank, made of concrete or fiberglass, with rows of brushes or mat material suspended
init to capture debris before it gets to the pump. A typical tank may be 5 feet square and 2 to 3 feet
deep. This type of pre-filter will require you to regularly remove and clean the brushes or mat material
Vortex pre-filters are shaped like a big round tub that is tapered at the bottom. Water enters from
the side at an angel which causes the water to rotate in the tub. This causes any debris to drift to the
outer wall and then sink to the bottom of the tank where it can be drained out when needed. Clean
water exits from a pipe in the center. Vortex filters, can consume a lot of space, may require a large hole
to set in and in some situations, a sump pump to drain them.
‘The “Advantage Collector Box" is a fiberglass box
with a large rigid net in it. The large model has 4
‘openings, each with a slide valve that allow you to
select up to 4 different sources from where the water
is to be drawn from. The medium model has 3
‘openings. With the valves, you can easily regulate
the flow from each source and on occasion, flush
one line at a time to reduce the chance of debris.
collecting in the pipes. Itrequires the least amount
of space and is probably the easiest to clean. tis
designed for ponds 6,000 gallons and larger where a large amount of,
debris is expected to be present.
Page820 Questions to Ask Yourself Before
You Build a Koi Pond
Presented by SacramentoKoi.com
Ineed?
10) What size pump
In selecting a pump you have one simple goal in
mind, to move the proper amount of water for the
least amount of money. To select a pump you first
need to estimate how much water you need to
move. On large ponds you need to send all your
pond water through the filter at least once every 3
hours. On smaller ponds it is easy to filter all the
water in a much shorter time, Take the total volume
‘of water in the pond and divide it by how often you
want all the water to go through the filter. This will
give you the minimum water flow you will need from
your pump.
Next, you will need to consider how much head pressure your system will generate. You can do this by
considering how much pressure at that minimum water flow will be created by your filter, the jets, the height
of the waterfall and the plumbing,
Example:If you decide you need a 60 gallon per minute flow through your filter and you system creates 14
feet of head pressure at 60 gpm, you will need a pump that will deliver 60gpm at 14 feet of head. When you
ook fora pump examine the performance flow chart for a pump that will give you between 60 and 70 gallons
per minute at 14 feet of head. A pump that is advertised to give 60 gpm at 4 feet of head may only produce 20
‘gpm at 14 feet of head, so get the facts befor you purchase a pump. The Advantage Plug & Play Filter Systems
have been factory tested to take the guess work out of planning your filter system's water flow.
(See www-PlugAndPlayfilters.com)
Is itimportant that the pump be quiet? Make sure you purchase an efficient pump built for koi ponds. Your
pump will be running 24 hours day. Most pool pumps are not designed to run 24 hours a day and installing
‘one on a koi pond will void your warrantee in some cases. An inefficient pool type pump can cost you an extra
$100.00 a month in electricity.
Pipe Area Comparison
1 Inch Pipe = 0.78 in?
11) What Size Pipe Should | Use?
Pipe size is extremely important on koi ponds. Pool Vslnch Pipe = 1.76 in?
builders will often use smaller diameter pipe when
building a swimming pool because it is cheaper and 2 Inch Pipe = 3.14 in?
easier to work with. They can easily overcome the restriction
caused by the smaller pipe by using large high pressure
pool pumps.This is acceptable because they usually only
un these pumps 4 to 6 hours a day. Koi ponds, on the
other hand, must move large volumes of water 24 hours
a day. The smaller you make your pipe, the more pressure Mimenene = ese?
it will require to move water through it.
2iInch Pipe = 4.90 in?
3 Inch Pipe = 7.06 ir?
Page920 Questions to Ask Yourself Before
You Build a Koi Pond
Presented by SacramentoKoi.com
Pumps are rated by how much water ( gallons per minute) they can move at a certain amount of head
pressure. 1 foot of head pressure is the amount of pressure required to push water up vertically 1 foot. Example:
To move 20 gallons of water per minute through 50 feet of 1 inch pipe would require 11.4 feet of head pressure.
Ifyou increased your pipe size from 1 inch to 2 inch your head pressure would drop to 4 feet of head. The lower
you keep your head pressure, the smaller, more efficient pump you can use. This can save you a lot of money
over the years.
12) How importants it to have a bottom drain?
Another common mistake that is almost 4 Inch
impossible to correct after the pond is built is
failure to install a bottom drain. Bottom drains are a
must for a successful koi pond. To maintain proper
water quality you need to get the fish waste into the
filter so it can be removed from the system. Without
a bottom drain, the best filter in the world cannot do
it’s job properly. Some ponds may require several
bottom drains depending on their size. That shows
how important they are to a successful pond. Some manufacturers
would have you believe that a bottom drain is not required. By
simply placing rocks on the bottom of the pond and allow beneficial
bacteria to grow in the rocks you will duplicate what you find in
nature and everything will be just fine. The problem with that 3 Inch
reasoning is that in nature you often have a constant supply of fresh
water entering the river or lake and the fish population is usually about one fish per 30,000 gallons, Whereas, in a
koi pond you are constantly recycling the same water over and over again and the fish population averages about
one fish per 300 gallons. Unless you only put one koi in your pond and change the water constantly you can’t
duplicate nature. What works in nature will not work in a koi pond.
Another potential problem is when leaves collect and begin to decay amongst the rocks, they produce tannin
acid which, though it doesn't bother the fish, will turn the water a brown dirty looking root beer color. The only
way to get clear water again is to drain the pond and power wash the rotting leaves from between the rocks. This
is a major job which, at best, provides only a temporary fix until the leaves again collect in the rocks. Additionally,
this whole cleaning process is extremely stressful to any koi in the pond, because they will need to be netted up and
stored while the pond is cleaned. Then placed back into a pond that has experienced a 100% water change and
the whole ecological balance of the pond has been changed. This whole experience can be avoided by simply
leaving out the rocks, installing a bottom drain and properly contouring the bottom. That way, any fish waste or
leaves that end up on the bottom of the pond, will work their way to the drain and be removed.
13) How importants it to have a skimmer?
A skimmer can make the difference between really enjoying a pond or eventually beginning to resent it. A
properly functioning skimmer will collect the leaves and anything else that lands on the surface of your pond
into a net or basket, where it can be easily disposed of Without a skimmer, you are sentenced to a life of constantly
cleaning leaves and debris from your pond.
Page 1020 Questions to Ask Yourself Before
You Build a Koi Pond
Presented by SacramentoKoi.com
‘Skimmers are a real bargain when you consider the minimal expense
they add to your pond. Note: Even if you plan to build your pond
inside your house, where there would be no leaves, you should still
install a skimmer because in addition to leaves, they skim off the
“dissolved organic compounds" (DOC). Dissolved organic compounds
will form in any pond and if not removed will causes an unsightly
film and bubbles on the surface of the pond. A skimmer removes
this film by constantly skimming off the top surface of the pond.
(The Advantage Fish Safe Skimmer)
portant is it to have jets?
15) How important is it to have an auto-fill?
An auto-fill is one of those features that if you install one you will love it. It makes
maintaining a pond so much easier. An auto-fill does just what the name implies. It will
automatically keep the pond water at the same level all the time. As water evaporates, it
will automatically replace it. They are especially useful if you have a bead filter, because
each time you backwash the filter, the auto-fill will replace any water used during the
process. Too often you hear of someone turning on the hose to add water and then
forgetting to turn it off only to later find all their koi dead. This is because whenever you
replace more than 10% of your pond water at any one time, with city water, you need to
add a dechlorinater to neutralize the chlorine in the water which is toxic to fish. With an
auto-fill you don't run the risk of forgetting to turn off the water. Under normal use itis
generally not necessary to add dechlorinator to the pond each time the auto-fill comes
on. The reason is that you are replacing such a small percentage of water that the
chlorine evaporates before it can become a problem.
Page 11
No door tg trap koi,
tr
Cross Section
Jets are very often overlooked by beginners when building
a pond. Anyone who has ever had properly installed jets in
their pond would never consider building a pond without
them. Jets have several wonderful benefits. They provide
exercise for the fish because they love to swim in the current.
By installing the proper type of jets, in the right location and
depth in a pond, they can be used to direct leaves toward the skimmer
making the skimmer much more effective. n addition, as the water from
(Eductor Jet) the jets breaks the surface of the pond it picks up considerable amounts
of oxygen thus increasing the overall oxygen level of the pond.20 Questions to Ask Yourself Before
You Build a Koi Pond
Presented by SacramentoKoi.com
The Advantage auto-fill comes with a built in overflow capability. This is important for two reasons. he first is
that whenever the pond overfills, such as during a rain storm, the excess water will exit through the auto-ill
instead of allowing the pond to overflow. Sometimes, when a pond overflows, the fish are prone to jumping out
of the pond. The second reason is, if the auto-fill water valve were to ever stick open, once the pond level raised
to the overflow level, any excess water would flow out the overflow instead if back into the pond. This could save
your koi from a chlorine overdose.
New ponds are especially prone to algae blooms until
the whole ecological system of the pond matures, which
may take several years. Ultraviolet lights are designed to
kill any algae floating in the water. Algae blooms in
ponds can turn a perfectly clear pond into a thick pea
soup looking pond in a short period of time. The way
ultraviolet lights work is when the algae, in the water,
passes through the unit itis exposed to a very bright
ultraviolet light. This energy from the light destroys the
DNA in the algae which in turn causes it to eventually
die, As the algae cells die they will begin to stick
together so that they can be filtered out of the water.
Selecting the proper size light is very important. Ifthe light is not big enough for the pond you will notice
almost no effect. Additionally, if the water flow through the light is too fast, it will also reduce the efficiency of
the light to where it has little effect. Ultraviolet lights are not effective against string type algae because it
attaches to the pond and does not flow through the light.
Under water lights installed in a pond extends the enjoyment of the pond beyond the daylight hours. The
pond takes on a completely different look at night with lights in it, At night, because there is no glare from
sunlight on the pond surface, the koi become more
visible than ever. The only complaints we ever
hear about pond lights is that “I wish we had
installed more lights when we built the pond!We
usually recommend installing several or more
lights in a pond, depending on the size of the
pond. Generally, the purpose of adding lights to a
koi pond is to light up the koi not just the pond
When you only add one light to a pond you often
times end up with one stream of light shining
across the pond, while much of the pond is still in
the shadows. With several lights coming from
different angles the whole pond lights up and thus
the koi become very visible.
Page 1220 Questions to Ask Yourself Before
You Build a Koi Pond
Presented by SacramentoKoi.com
18) Should | install an automatic feeder on my koi pond?
‘Automatic feeders have their place.if you have a large pond and you want your koi to grow as fast as possible,
then install an automatic feeder and feed them a high protein food 5 times a day during the whole summer. On
the other hand, if you just want something to relieve you of the responsibility of feeding your koi daily, ! would
encourage you to save your money and find the time to do it yourself even if tis only once a day. By feeding
your koi on a daily basis you will become familiar with how they respond to the food. This is invaluable! The first,
time you feed them and you notice one or more of them responding differently, you know something is wrong.
It could be something as simple as your water chemistry is off or something more serious such as parasites.
Whatever it is, you will be able to get a jump on it before it becomes a real problem.When you go on vacation
just ask your neighbor if he or she would mind coming over once a day and throwing some food in the pond.
Most neighbors would jump at the chance. The real advantage of your neighbor feeding you koi while you are
‘on vacation rather than some machine, is that if there is a problem they can call someone.
19) How many koi can I put in my pond?
This is a good question and a hard one to answer.
There is an optimum number of koi for each pond.
The problem is, that number keeps changing. A well
built 1500 gallon pond will easily sustain 30 koi 6
inches long. Two years later when those same 30 koi
are now all 18 inches long you have a real problem,
because your pond is now over stocked. Because
people tend to overstock their ponds, all the
‘Advantage Koi Pond System Kits, were designed to
have an oversized filter on them. This means that
the limiting factor for how many koi you can keep in
your pond will not be limited by the filtering system.
Rather, the limiting factor will be how crowded the
koi look in the pond. Even with perfect water quality
when the koi become too crowded their
system begins to slow down and they begin to have problems. The best way to judge how many koi to keep ina
pond with the Advantage System is simply to examine how crowded they look. If they can’t swim in a relaxed
fashion itis time to remove some, even though the water quality tests fine.
20) What should | look for when selecting someone to build my koi pond?
Do not make the costly mistake of assuming that your landscaper or contractor knows how to build a koi pond
correctly. You need to do your homework and give some serious thought as to how you want your koi pond to
turn out. Review the previous questions and make notes as to what is important to you and what is not. How big
do you want the pond to be? How important is it to you that the pond be easy to maintain? How much do you
want to spend on the pond? You need to have clear in your mind what kind of pond you want. Then, when selecting
someone to build your pond, interview them concerning their workmanship and experience. If you can find
Page 1320 Questions to Ask Yourself Before
You Build a Koi Pond
Presented by SacramentoKoi.com
someone who specializes in building koi ponds, that
might be helpful. The reason we say it might be
helpful is because sometimes people who only build
koi ponds have one set way of building them and are
not open to changes.
With today’s new technology you can create a
pond that will not only give you better water quality,
but one that will be so much easier to maintain than
what was offered just 8 years ago. Unless you and
your builder can agree, beforehand, on exactly
how you want your pond to be built, the whole
experience could be a disaster.
For example: One customer contracted to have a formal shaped 3,000 gallon pond built “exactly” according to
the “Advantage Koi Pond Design Plans’ for a 3,000 gallon pond. He was a very busy doctor who needed a pond
that was as easy to maintain as possible. The contractor continued to assure him, as he was building the pond,
that he was following the plans exactly. When the pond was finally completed it was beautiful to look at with it’s
slate waterfall and edges. At night, the lights he installed help create a wonderful sight. The problem was that
there was no gradual contour leading from the sides of the pond to the bottom drain. The contractor had
completely ignored the recommended bottom contour, so the waste would be removed automatically and
instead made the whole bottom flat. The result is that, now the owner has to, on a weekly basis, vacuum the
bottom of his pond to keep it free of debris. Needless to say, the owner is furious with the contractor. The lesson
from this example is that you really need to get involved in the design of your pond.
Don't leave it all up to your contractor. Listen to his advice but it is up to you to make sure itis being built
correctly. iF you need a second opinion, feel free to give us a call at Sacramento Koi. New! We now offer an intense
‘one day class on how to build the perfect koi pond.
“Building The Perfect Koi Pond" pond bt
ing class.
This is an intense one day course conducted by Steve Walker,
President of Sacramento Koi. This class will introduce you to the
"Advantage Koi Pond System" and show you how to build a quality
koi pond. It will cover both design and basic construction. It will also
include information on koi fish and what makes them unique, so that,
you can better understand why itis necessary to build a koi pond this
way. Class starts at 8:30 am and concludes at 5:00 pm. Includes lunch
along with a pond tour of koi ponds ranging from 1,500 gallons to
10,000 gallons. Price for this class is $160 for one person. If you wish
to bring a guest, add $80 per individual.
Page 14The New Advantage "Plug and Play" Pond Filter System
The easiest filter to operate is now part of the easiest filtration system to install.
‘Advantage Bead Filter*
(916) 652-4231
Paratha arte
-Clear top closure lid to verify the bead media is loose
during backwashing cycle.
-Electrical control system. Switches on top control
‘two ofthe four plugs below.
-Four plug outlets. The right two outlets are controlled
by the switches above, One is used to
‘operate the pump while the other
outlet can be used for any optional
equipment such as an air pump or
lights. The UV light and Blower connect
‘outlets. All outlets are GFCI protected.
-Main power supply cord for electrical control
system is 12 gauge wire and 20 feet long,
~All plumbing comes precut and glued. simp
(Advantage 15,000 Galion Plug and Play System)