Professional Documents
Culture Documents
Contents
Page 1 : Instructions & Notes (This Page)
Instructions
Step 1: Perforate/Score along blue lines.
Step 5: Glue/Double Sided Tape the grey “A” and “B” (if present) letter location for each divider.
Step 6: Fold so “A” letters meet and “B” letters meet; let dry if using glue.
Step 7: Trim corners as needed to fit tray or use a corner rounder (see example yellow marks on page 1).
Notes
You can skip Step 5 by placing tape on the bottom after Step 6.
If using light paper stock, it might be handy to tape them into the tray cells with double sided tape or mount them
on light card stock.
Recommended Tools/Supplies:
Hobby Knife w/ aluminum shaft and Carl Hand Rotary Cutter w/ optional perforation blade. (~$30)
OR
Dahle 507 Trimmer w/ optional perforation blade. (~$50) Designed by Jeff Yeackle
jyeackle on BoardGameGeek
2 x 1/2 Divider
A
A
A A
2/3 + 1/3 Divider
A
A
A A
3 x 1/3 Divider
B
B
A
A
3 x 1/3 Divider