Professional Documents
Culture Documents
Question 1
Question 2
Question 3
A tensile test was conducted on a metal specimen, and it was found that a true strain
of 0.25 is produced when a true stress of 575 MPa is applied; for the same metal, the
value of K is 806 MPa. Calculate the true strain that results from the application of a
true stress of 600 MPa
Question 4
Given that the Elastic modulus of the material in the graph below is 111 GPa
1 Calculate the maximum elastic elongation of the material.
3.3.2 Calculate the final elongation if the total elongation during tensile test just before
breaking the tensile specimen is 53%.