Professional Documents
Culture Documents
page 1/2
Advantages:
- Easy application
- Non contaminating
- Waterbased
- No odour
- No mould build- up
- Can be used on all mould surfaces
- Durable; provides multiple releases per application
- temperature stably to more then 280°C
Properties:
Appearance: milky, liquid
Coverage: 20- 25 m²/l
Shelf life: 1 year
Application:
If a wax or silicone based release agent has been used previously, remove all
traces of previous product using a cleaner such as DexClean.
Aquacoat SF-176 can be applied over existing semi- permanent release agents
without a further cleaning step. However, the mould should be clean and dry
before used.
2.Gently wipe over mould surface covering an area of approximately 0,5 -1 m².
3.Wait approximately 2 minutes,and then lightly wipe over the mould surface
using a separate cloth.
5.Wait approximately 2 minutes,and then lightly wipe over the mould surface
using a separate cloth.
7.Allow a set time of 30 minutes before using the mould. If application has
been made to a warm surface, a shorter waiting period is needed.
8.For touch up apply a single coat of Aquacoat SF-176 as above and continue
processing.