Professional Documents
Culture Documents
Turbidex’s enhanced ability to remove sediment Customers that switch to Turbidex report that
results in superior water clarity and down stream the pressure drops across the system decrease
cost savings on substantially. This results in longer service runs
membrane cleaning, membrane life, etc. and less frequency between backwashes.
Turbidex™ is a unique natural ore called clinoptilolite Turbidex prevents a rapid buildup of head loss and blinding
that has many outstanding advantages over common
solids reduction. Viewed under an electron scanning provides conservation of water. This ideal combination of
microscope, the granules reveal an angular shape, rough particle shape, texture and porosity make it a good choice
surface and microporous void spaces as small as 3
microns. This creates a surface area over 100 times greater important.
than silica sand. The angularity of the granules and the Substantial savings can be realized when designing
tapered internal pore spaces allow for reduction of dirt, a system using Turbidex. Its low pressure drop, high
silt and organic matter suspended in water by bridging,
straining and adhesion. The rough surface and internal lower backwash frequency allow economy in equipment
downsizing and reduced pumping requirements. Its low
density also saves on handling expense and shipping costs.
typically reduce suspended solids down to the 5 micron Turbidex can be applied to systems designed for either
or less range. Turbidex’s structure typically creates less
characteristics, Turbidex can be used to replace multimedia
penetration into the bed for higher sediment loading
Service
Service Flow
ServiceFlow
Flow Pressure
Pressure
PressureDropDrop
Drop Backwash
Backwash Bed
BackwashBed Expansion
BedExpansion
Expansion
1.0
1.0 60%
60
60
0.9
0.9
Inch/Foot of Bed Depth)
50%
50
50
0.8
0.8
E
) E
Backwash Expansion
0.7
0.7 UR
°C R
(4 TU
AT C) 40%
40
40
°F RA
R
E (4 °
Pressure Drop
)
MP °F
40 PE
0.6
0.6
% Expansion
% Expansion
°C
TE 40 16 C)
M
F( 6°
(Pounds per Square PSID/FT
PSID/FT
TE
° °C (1
0.5
0.5 60
F (27 30%
30
30 °F °C
)
80
° 60 (27
°F
80
0.4
0.4
20
20
20%
0.3
0.3
0.2
0.2
10%
10
10
0.1
0.1
0.0
0.0 0%
00
00 55 10
10 15
15 20
20 25
25 00 55 10
10 15
15 20
20 25
25
Flow Rate
GPM/FT^2
GPM/FT^2 Flow Rate
GPM/FT^2
GPM/FT^2
(Gallons per Minute/Square Foot of Bed Area) (Gallons per Minute/Square Foot of Bed Area)
55 00 / / 33 11 / / 22 11 55 00 / / 33 11
ORDER INFORMATION
Part No. Description Cu. Ft./Bag Wt./Cu. Ft.* Bags/Pallet Weight/Pallet Pallet Dimensions
A8025 Turbidex™ 1 50 lbs. 40 2050 lbs. 40” x 48” x 44”
*Weight per cubic foot is approximate.
The information and recommendations in this publication are based on data we believe to be reliable. They are offered in good faith, but do not imply
any warranty or performance guarantee, as conditions and methods of use of our products are beyond our control. As such, Hydro Source, LLC. makes
for a particular purpose. We recommend that the user determine whether the products and the information given are appropriate, and the suitability
The information and recommendations given in this publication should not be understood as recommending the use of our products in violation of any
patent or as a license to use any patents of Hydro Source, LLC.