Professional Documents
Culture Documents
Now you can Sublimate your favorite materials, like GlitterFlex Ultra and some DecoFilms!
Create a vector Separate the two Test cut the vinyl for
based cut file by files, and group up best results and reverse
tracing the outside your vector outlines the vector design before
of the picture/design to get the most cutting. After cutting,
you want sublimated. out of the heat weed excess vinyl from
transfer vinyl. around your cut design.
Peel the clear carrier off your Turn the sublimation print color side down
pressed design. and line it up with the vinyl.
When the sublimation ink is dry, cut Taping down the edges with ThermoTape
one of the prints out. Cutting near the helps guard against any shifting while
edges will help in lining the print up pressing.
to the vinyl already pressed on the shirt.
Use the printed sheet After heat applying Remove Teflon and sublimation
as a guide and hand DesignFilm, lay paper.
cut the material out. sublimation sheet
print side down and If there are any lines on the
Heat press at 290° cover with Teflon. DesignFilm from the paper, heat
for 12 seconds. press with Teflon for another five
Press at 390° for 20-30 seconds.
seconds.
Copyright © 2014, Specialty Materials & Digital Decoration, LLC. All rights reserved. 2929 W. 21st Street, Tulsa, OK 74107 877-437-8556