Professional Documents
Culture Documents
Technical Specification For Cladding and Floor-Tiling Granite-Porcelain, Marble and Stone
Technical Specification For Cladding and Floor-Tiling Granite-Porcelain, Marble and Stone
Shahalcrete 472 is used for cementing stone, marble and granite-porcelain tiles on indoor floors
and walls by adding cement and sand,on plaster, concrete and existing floor-tiling surfaces.
1. Clean thoroughly the back of the stone and the surface to be clad of dust, grease
and other dirt by scrubbing with brush and water.
4. In case you want to cement thick tiles of granite porcelain or natural marble
or on sand or stabilized sand you may work as follows:
a. Prepare a primer as per paragraph 2.
b. Prepare cementing mortar as follows: mix one part cement with two parts
sand or ready mortar, add Shahalcrete 472 at a rate of one tenth of the
cement, water as may be required, attach the tile with wet primer applied
to its back on the said cementing mortar.
Stepping on the cemented surface is allowed after 48 hours.
5. We recommend leaving 4-6 mm gaps between floor tiles and wall cladding tiles.
The user is responsible for the compatibility of the material to his application. In any case we
recommend testing the material and checking its suitability before carrying out large scale
application.
08
088507227 : פקס,08
088584444 : ' טל83101 קריית מלאכי167 .ד. ת,איזור התעשייה באר טוביה