Professional Documents
Culture Documents
Shutdown SIS
Previous Screen
Welcome: a3yn3412
Product: MAR INE ENGINE
Mode l: C 32 MAR INE ENGINE R NY00807
C onfiguration: C 32 Marine Engine R NY00001-UP
Specifications
C32 Marine and Auxiliary Marine Engines
Media Number -SENR9772-06 Publication Date -01/06/2011 Date Updated -08/06/2011
i04400479
Cylinder Block
SMCS - 1201
Illustration 1 g02582497
Front view of the engine
Illustration 2 g02585096
Marks for tightening main bearings
Table 1
Specification for 253-9882 Cylinder Block Gp and 273-7595 Cylinder Block Gp
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage=/sis… 2/5
3/5/2014 C32 Marine Engine RNY00001-UP(SEBP4767 - 32) - Systems & Components
Item Qty
Part Specification Description
The top face of the cylinder block, bottom surface of spacer plate (1) and both sides of plate gasket (2) must be
free of fuel, oil, water, gasket adhesives, assembly compounds and any other contaminants during assembly.
225-3100
Thickness is
1 2 Spacer
8.585 ± 0.025 mm (0.3380 ± 0.0010 inch).
Plate
225-3101
Thickness of plate gasket that is between cylinder block and spacer plate is
2 2 Plate
0.208 ± 0.025 mm (0.0082 ± 0.0010 inch).
Gasket
7C-9614 Before assembly, apply Loctite low breakloose PST on the threads.
3 4 Taperlock Torque to
Plug 80 ± 15 N·m (60 ± 11 lb ft).
4N-1650 Extension of the dowels on the left bank and right bank from the cylinder block is
A 4
Dowel 18.5 ± 0.5 mm (0.73 ± 0.02 inch).
232-7607 The crankshaft caps must be installed with the identifying marks toward the front of
4 7 Crankshaft the engine. The number of the main bearing cap must also match the cast number on
Cap the left side of each main bearing saddle.
The distance from the centerline of the crankshaft bearing bore to the top of the
C - - cylinder block is
419.10 ± 0.15 mm (16.500 ± 0.006 inch).
The distance from the centerline of the crankshaft bearing bore to the bottom of the
D - - cylinder block is
165.10 ± 0.10 mm (6.500 ± 0.004 inch).
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage=/sis… 3/5
3/5/2014 C32 Marine Engine RNY00001-UP(SEBP4767 - 32) - Systems & Components
7. Tighten the bolts (6) that are placed on the main bearing tab side of the crankshaft
cap (4) from the mark by angle (F) of 120 ± 5 degrees.
8. Tighten the side bearing cap bolts (5) that are opposite the main bearing tab side of
14 234-6902 the crankshaft cap (4) to
6 80 ± 10 N·m (60 ± 7 lb ft).
Bolt
9. Tighten the side bearing cap bolts (5) that are placed on the main bearing tab side
of the crankshaft cap (4) to
80 ± 10 N·m (60 ± 7 lb ft).
Illustration 3 g02584896
Right side of the engine
Table 2
Specification for 253-9882 Cylinder Block Gp and 273-7595 Cylinder Block Gp
Item Qty
Part Specification Description
214-1728 Stud Apply blue Loctite 540 to the pipe threads of stud. Tighten the stud with the
7 1
coated pipe threads into the cylinder block.
6L-4428
Torque to
8 3 Taperlock Stud
35 ± 5 N·m (26 ± 4 lb ft).
Extension of dowels from the rear face of the cylinder block and from the front
4N-0683 Dowel
G 4 face of the cylinder block is
19.0 ± 0.5 mm (0.75 ± 0.02 inch).
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage=/sis… 4/5
3/5/2014 C32 Marine Engine RNY00001-UP(SEBP4767 - 32) - Systems & Components
C opyright 1993 - 2014 C ate rpillar Inc. Sat May 03 2014 11:32:43 GMT-0300 (Hora oficial do Brasil)
All R ights R e se rve d.
Private Ne twork For SIS Lice nse e s. a3yn3412
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage=/sis… 5/5