UNIVERSITY
GREENWICH
MSE452: Mechanical Vibrations
Assignment 7: Vibration Control
9.21 A shaft, having a stiffness of 3.75 MN/m, rotates at 3600 rpm. A rotor, having a
mass of 60 kg and an eccentricity of 2000 microns, is mounted on the shaft. Determine
(a) the steady state whirl amplitude of the rotor and (b) the maximum whirl amplitude of
the rotor during start-up and stopping conditions. Assume the damping ratio of the system
as 0.05.
-S
Giver s- = bok ae Aeoo xlO Mm
Kg asxlobulm u's 0.05 neo
we 360097 = 376.42 cod eee n= 2
6
° E 245 xb° _ asonojrwi/See
n= Vi = VG
co W _ SAGAaR
in” —gs0. = =e
1.50796 &
A= 2,
feo tars y™
= Coo x59) » (1506) y _ seeasuieirt
[a 15068) * @lo: os)(tseee) rye 7
0:05 . (eros
0 + 35 + Teed
@D Steady Sete
Page 1 of2
ee
Scanned with CamScannerUNIVERSITY of
GREENWICH
393 An eleorie motor, of mass 20 kg and operating speed 1350 rpm, is placed on a
fixed-fixed steel beam of width 15 cm and depth 12 em, as shown in Fig. The motor has a
rotating unbalance of 0.1 kg-m. The amplitude of vibration of the beam under steady-
state operation of the motor is suppressed by attaching an undamped vibration absorber
undemeath the motor, as shown in Fig. Determine the mass and stiffiess of the absorber
such that the amplitude of the absorber mass is less than 2 cm.
FREE BOO DLAGRAM (+)
tA HO
-
oe
Liem
PML, = Akg w= 195 2m = WBA Red 1s
Men ottym — yy, PUM al —a(Sat8))
a EL?
= \ (ous) (oDn)*
ag 15) (#Ory “L gavBRB SP
Le (ac xto) (9.16 1158016) _ Om
SIA LCD Os) ~1(3 (A) 195) |
ae (ark?
Ye. Yo
a= 4] ke, NERS
7
3 = t0(in.s) = \ARECSRTBT Ine
Amite oy, To tke I”
Mrlore
Bike amplilide =
= Men me od
ae eo
Page 2 of 2
Scanned with CamScanner