You are on page 1of 2

As a being graduate of Mechanical Engineering i have a lot knowledge regarding my field.

I consider
Mechanical as bone of Engineering in modern world. The fundamental development is related to
Mechanical Engineering whether it is construction or modern technology. Mechanical is just another
which i want to explore more and more to enhance my knowledge.

Selecting Turkey for higher education is an old dream and other than this we have very good mutual
relations as being citizen of Pakistan. So this encouraged me to choose Turkey for my higher education.

I prefer to work on engineering materials. Materials are essential in growing world so working on
materials will help for engineering world.

I worked on plastic waste conversion to syngas which further may be used as a fuel in nuclear plants. So
eager to continue it more further if get a chancze.

I have concern that why plastic waste is not being used to generate fuel or power? I have concern that
why plastic waste is not being used to generate fuel or power?

dumping plastic waste is not the solution but we need to use it in a proper way. It is available in large
ratio around us which never end as we use plastic daily life, so why not we should bring alternative
method to take advantages of this which never end from the world.

The Global Production of Plastic is also increasing and for most countries the growing consumption of
Plastics results in an increase of waste generated by householders and industries and this is becoming a
challenge to different waste disposal methods. Energy consumption worldwide is rapidly increasing and
especially due to Plastics used in everyday life and with the increase of waste every year linked to
growing population, discarded Plastic products and packaging constitute a growing portion of the
Municipal Solid Waste (MSW) stream. Plastics contained in the MSW are mainly thermoplastics:
Polyethylene (PE), Polypropylene (PP), Polystyrene (PS), and Polyvinyl Chloride (PVC) and occupy two
thirds of Plastic sales worldwide. There are different alternative methods for the treatment of MSW and
plastic waste. The most common are Landfilling, Incineration, Mechanical Recycling and Chemical
Recycling

Gasification subjects solid plastic waste to high heat (generally above 600C) in a starved

oxygen environment. To have prevent immediate combustion oxygen ratio will be kept less,

the carbon based fraction of the solid waste decomposes into Synthetic gas (syngas) and a solid

residue, known as slag, ash, or char. Syngas is composed primarily of Carbon Monoxide,

Hydrogen, and Carbon Dioxide, with contaminants. The Syngas has sufficient calorific value

to be burned for energy in power sector for the generation of the electricity.
It will contribute to my field where this efficient method to generate fuel for nuclear power plants.
Nuclear power plants are playing essential role for our power generation, helping us to overcome
economic crisis and generate electricity as well.

Plastics are synthetic organic materials produced by Polymerization and typically classified according to
their composition and/or performance. They are of high molecular mass and may contain other
substances beside polymers to improve the performance and/or reduce costs. These polymers can be
molded or extruded into desired shapes. There are mainly two major groups of plastics: thermosets and
thermoplastics. Being ranked as one of the most lucrative industries, plastics are used in everyday life
and with the increase of waste every year linked to growing population, discarded plastic products and
packaging constitute a growing portion of the Municipal Solid Waste (MSW) stream. Plastics contained
in the MSW are mostly thermoplastics: Polyethylene (PE), Polypropylene (PP), Polystyrene (PS), and
Polyvinyl Chloride (PVC) with two thirds of plastic sales worldwide. There are different alternative
methods for the treatment of MSW and plastic waste. The most common are landfilling, incineration,
mechanical recycling and chemical recycling and energy recovery.

I think engineering material need more work, it is need of modern technology all depend upon
materials. For any design material is well researched before designing. So engineering material need
more work and research still.

You might also like