Professional Documents
Culture Documents
Environment
¥ Large and small bore valves. Surface ✔ ✔ ✔ ✔ ✔
Subsea ✔ ✔
¥ Valves fitting a wide range of land, offshore and Characteristics
subsea applications. Slab Gate ✔ ✔ ✔
Expanding Gate ✔ ✔
Forged Body ✔ ✔ ✔
¥ Cast and forged bodies. Cast Body ✔ ✔
Manual ✔ ✔ ✔ ✔ ✔
¥ Expanding and slab gate designs. Actuated ✔ ✔
Clad ✔ ✔
Fire Resistant ✔ ✔ ✔ ✔
¥ Components constructed of various alloys for severe Wireline Cutting ✔ ✔ ✔
service applications.
¥ Designs suitable for actuation and compatible with a
wide range of actuators.
Comparison of Cameron Gate Valves by Application
CameronÕs more than one-half century of experience
Slab Gates Expanding Gates
designing, testing, installing and refurbishing gate Description
FL FLS FLS-R M M215
valves has established a worldwide reputation for Production
manufacturing excellence. Application
Outlet Valve ✔ ✔ ✔ ✔ ✔
Lower Master Valve ✔ ✔ ✔ ✔ ✔
Every valve must meet the exacting standards mandat- Upper Master Valve ✔ ✔ ✔ ✔ ✔
Surface Safety Valve (SSV) ✔ ✔ ✔
ed by its end use. To ensure these standards are achieved, Swab Valve ✔ ✔ ✔ ✔ ✔
Cameron uses state-of-the-art materials and machinery in Wing Valve ✔ ✔ ✔ ✔ ✔
Flowline Valve ✔ ✔ ✔ ✔ ✔
its manufacturing process. Thus, it is not surprising that Manifold Valve ✔ ✔ ✔
Drilling
Application
Mud Manifold Valve ✔ ✔ ✔
Choke and Kill Valve ✔ ✔ ✔
Fracturing Valve ✔ ✔
Service
High Temperature (350˚F+) ✔ ✔ ✔
Low Temperature (-75˚F) ✔ ✔ ✔
Salt Water ✔ ✔ ✔
Drilling Mud ✔ ✔ ✔
H2S ✔ ✔ ✔
Service
High Temperature (350˚F+) ✔ ✔ ✔
Low Temperature (-75˚F) ✔ ✔ ✔
1
Slab-Style Gates
Available Actuators
*In these sizes use FLS-R in manual applications, FLS in actuated only.
Notes: FLS-R valves are manual only, FLS and FL may be actuated or manual. This
chart represents typical valves for material classes AA, BB, CC, DD, EE, FF, and HH;
Temperature ratings K, L, P, R, S, T, U, V; and PSLs 1, 2, 3, 4. For other designs,
contact your Cameron representative.
Saf-T-Gard is a registered trademark of the Cameron Division of the Cooper Cameron Corporation.
2
Expanding-Style Gates
2-9/16 M M M M215
3-1/8 M M M ----
4-1/16 M M M ----
Note: This chart represents typical valves for material classes AA, BB, CC, DD,
EE and FF; Temperature ratings K, L, P, R, S, T, U, V; and PSLs 1, 2. For other
designs, contact your Cameron representative.
3
FL Gate Valve
FL Seal
Cameron FL Gate Valves incorporate
a single spring-loaded lip seal as
shown in this detail.
4
FL Operating and Dimensional Data
F
(inches and pounds)
2-1/16 2000 10.62 11.62 6.12 13.00 5.25 15.38 14.00 160 12-1/3
E 3000 10.62 14.62 6.75 13.00 5.62 15.38 14.00 170 12-1/3
5000 10.62 14.62 7.00 15.12 5.62 17.38 14.00 175 12-1/3
2-9/16 2000 12.38 13.12 7.12 13.88 6.00 16.12 14.00 200 15-1/8
3000 12.38 16.62 7.62 13.88 6.05 16.12 14.00 220 15-1/8
5000 12.38 16.62 9.25 16.81 7.38 19.06 14.00 230 15-1/8
3-1/8 2000 13.62 14.12 7.75 16.81 7.12 19.06 14.00 240 18-1/8
3000 13.62 17.12 7.50 16.81 7.38 19.06 14.00 260 18-1/8
D 5000 13.62 18.62 7.50 16.81 7.38 19.06 18.50 360 18-1/8
4-1/16 2000 15.38 17.12 9.75 18.44 9.12 20.69 14.00 350 23-1/4
A 3000 15.38 20.12 10.50 18.44 9.12 20.69 18.50 450 23-1/4
5000 16.54 21.62 10.81 18.44 9.12 20.69 18.50 520 23-1/4
2-1/16 2000 269.75 295.15 155.45 330.20 133.35 390.65 355.60 72.57 12-1/3
3000 269.75 371.35 171.45 330.20 142.75 390.65 355.60 77.11 12-1/3
5000 269.75 371.35 177.80 384.05 142.75 441.45 355.60 79.38 12-1/3
2-9/16 2000 314.45 333.25 180.85 352.55 152.40 409.45 355.60 90.72 15-1/8
3000 314.45 422.15 193.55 352.55 153.67 409.45 355.60 99.79 15-1/8
B 5000 314.45 422.15 234.95 426.97 187.45 484.12 355.60 104.33 15-1/8
3-1/8 2000 345.95 358.65 196.85 426.97 180.85 484.12 355.60 108.86 18-1/8
3000 345.95 434.85 190.50 426.97 187.45 484.12 355.60 117.93 18-1/8
FL Gate Valve - End View 5000 345.95 472.95 190.50 426.97 187.45 484.12 469.90 163.29 18-1/8
4-1/16 2000 390.65 434.85 247.65 468.38 231.65 525.53 355.60 158.76 23-1/4
3000 390.65 511.05 266.70 468.38 231.65 525.53 469.90 204.12 23-1/4
5000 420.12 549.15 274.57 468.38 231.65 525.53 469.90 235.87 23-1/4
AA - General Service Alloy steel Alloy steel nitrided Alloy steel nitrided Alloy steel nitrided
BB - General Service Alloy steel AISI 410 SS nitrided AISI 410 SS nitrided Solid cobalt alloy or
or chrome-plated 410, cobalt alloy hard-faced
CC - General Service 12 Cr SS AISI 410 SS nitrIted AISI 410 SS nitrided Solid cobalt alloy or
or chrome-plated 410, cobalt alloy hard-faced
DD - Sour Service* Alloy steel Alloy steel nickel-plated Alloy steel hard-faced or Solid cobalt alloy or
duplex nickel-coated 410, cobalt alloy hard-faced
EE - Sour Service* Alloy steel AISI 410 SS nitrided AISI 410 SS hard-faced Solid cobalt alloy or
410, cobalt alloy hard-faced
FF - Sour Service* 12 Cr SS AISI 410 SS nitrided AISI 410 SS hard-faced Solid cobalt alloy or
410, cobalt alloy hard-faced
HH - Sour Service* Alloy steel clad with Alloy 718 Alloy 718 hard-faced Solid cobalt alloy or
alloy 625 or solid alloy 718 alloy 718 hard-faced
5
TC10028/TC1201 Gate Valve Bro 6/4/1999 11:10 AM Page 9
6
TC10028/TC1201 Gate Valve Bro 6/4/1999 11:12 AM Page 10
3.75”
E
C
A B
FLS Operating and Dimensional Data FLS Operating and Dimensional Data
(inches and pounds) (millimeters and kilograms)
1-13/16 10,000 18.25 9.06 15.12 5.75 17.38 14.00 240 12-1/3 1-13/16 10,000 463.55 230.12 384.05 146.05 441.45 355.60 108.86 12-1/3
15,000 18.00 9.88 15.12 5.88 17.38 14.00 280 12-1/3 15,000 457.20 250.95 384.05 149.35 441.45 355.60 127.00 12-1/3
2-1/16 2000 11.62 6.12 13.00 5.25 15.38 10.00 100 12-1/3 2-1/16 2000 295.15 155.45 330.20 133.35 390.65 254.00 45.36 12-1/3
3000 14.62 6.75 13.00 5.62 15.38 14.00 185 12-1/3 3000 371.35 171.45 330.20 142.75 390.65 355.60 83.91 12-1/3
5000 14.62 7.00 15.12 5.62 17.38 14.00 185 12-1/3 5000 371.35 177.80 384.05 142.75 441.45 355.60 83.91 12-1/3
10,000 20.50 9.38 15.12 5.88 17.38 18.50 270 12-1/3 10,000 520.70 238.25 384.05 149.35 441.45 469.90 122.47 12-1/3
15,000 19.00 9.88 33.81 6.12 17.38 18.50 300 12-1/3 15,000 482.60 250.95 858.77 155.45 441.45 469.90 136.08 12-1/3
2-9/16 2000 13.12 7.12 33.81 6.00 16.12 10.00 150 15-1/8 2-9/16 2000 333.25 180.85 858.77 152.40 409.45 254.00 68.04 15-1/8
3000 16.62 7.62 33.81 6.50 16.12 14.00 230 15-1/8 3000 422.15 193.55 858.77 165.10 409.45 355.60 104.33 15-1/8
5000 16.62 9.25 16.81 7.38 19.06 14.00 230 15-1/8 5000 422.15 234.95 426.97 187.45 484.12 355.60 104.33 15-1/8
10,000 22.25 9.81 15.81 6.81 18.12 18.50 370 15-1/8 10,000 565.15 249.17 401.57 172.97 460.25 469.90 167.83 15-1/8
15,000 21.00 11.50 17.18 7.94 19.56 18.50 560 15-3/4 15,000 533.40 292.10 436.37 201.68 496.82 469.90 254.01 15-3/4
3-1/8 2000 14.12 7.75 16.81 7.12 19.06 14.00 210 18-1/8 3-1/8 2000 358.65 196.85 426.97 180.85 484.12 355.60 95.25 18-1/8
3000 17.12 7.50 16.81 7.38 19.06 14.00 280 18-1/8 3000 434.85 190.50 426.97 187.45 484.12 355.60 127.00 18-1/8
5000 18.62 7.50 16.81 7.38 19.06 18.50 340 18-1/8 5000 472.95 190.50 426.97 187.45 484.12 469.90 154.22 18-1/8
3-1/16 10,000 24.38 10.25 16.88 8.06 18.06 24.00 530 18-1/8 3-1/16 10,000 619.25 260.35 428.75 204.72 458.72 609.60 240.40 18-1/8
15,000 23.56 13.56 20.94 9.25 22.18 24.00 890 22-7/8 15,000 598.42 344.42 531.88 234.95 563.37 609.60 403.70 22-7/8
4-1/8 2000 17.12 9.75 18.44 9.12 20.69 18.50 350 23-1/4 4-1/8 2000 434.85 247.65 468.38 231.65 525.53 469.90 158.75 23-1/4
3000 20.12 10.50 18.44 9.12 20.69 18.50 450 23-1/4 3000 511.05 266.70 468.38 231.65 525.53 469.90 204.12 23-1/4
5000 21.62 10.81 18.44 9.12 20.69 18.50 540 23-1/4 5000 549.15 274.57 468.38 231.65 525.53 469.90 244.94 23-1/4
4-1/16 10,000 26.38 12.81 19.69 10.06 20.94 24.00 870 23-1/4 4-1/16 10,000 670.05 325.37 500.13 255.52 531.88 609.60 394.63 23-1/4
15,000 29.00 14.60 33.80 11.70 35.80 24.00 1555 29-1/4 15,000 736.60 370.84 858.52 297.18 909.32 609.60 705.33 29-1/4
5-1/8 3000 24.12 21.00 21.31 11.38 22.56 24.00 975 27-1/2 5-1/8 3000 612.65 533.40 541.27 289.05 573.02 609.60 422.25 27-1/2
5000 28.62 21.75 21.31 11.38 23.56 24.00 1100 27-1/2 5000 726.95 552.45 541.27 289.05 598.42 609.60 498.95 27-1/2
10,000 29.00 23.50 23.88 13.12 25.25 24.00 1310 29 10,000 736.60 596.90 606.55 333.25 641.35 609.60 594.21 29
6-1/8 2000 22.12 12.38 22.75 12.88 24.00 18.50 800 33-3/4 6-1/8 2000 561.85 314.45 577.85 327.15 609.60 469.90 362.87 33-3/4
3000 24.12 12.75 22.75 12.88 24.00 24.00 1000 33-3/4 3000 612.65 323.85 577.85 327.15 609.60 609.60 453.59 33-3/4
5000 29.00 14.12 22.75 12.88 24.00 24.00 1220 33-3/4 5000 736.60 358.65 577.85 327.15 609.60 609.60 553.38 33-3/4
6-3/8 2000 22.12 13.19 22.75 12.90 24.50 18.50 890 33-3/4 6-3/8 2000 561.85 335.03 577.85 327.66 622.30 469.90 403.70 33-3/4
3000 24.12 14.12 22.77 12.90 24.50 24.00 1020 33-3/4 3000 612.65 358.65 578.36 327.66 622.30 609.60 462.66 33-3/4
5000 29.00 14.50 22.77 12.90 24.50 24.00 1230 33-1/4 5000 736.60 368.30 578.36 327.66 622.30 609.60 557.92 33-3/4
10,000 35.00 17.40 40.10 14.70 42.10 35.00 2500 43-1/8 10,000 889.00 441.96 1018.54 373.38 1069.34 889.00 1133.98 43-1/8
7-1/16 3000 28.12 17.38 37.11 14.62 48.19 43.00 1875 46-1/2 7-1/16 3000 714.25 441.45 942.59 371.35 1224.03 1092.20 850.49 46-1/2
5000 32.00 17.38 37.11 14.62 48.19 43.00 1975 46-1/2 5000 812.80 441.45 942.59 371.35 1224.03 1092.20 895.84 46-1/2
9 5000 41.00 23.12 40.62 19.95 51.70 43.00 4100 59-1/4 9 5000 1041.40 587.25 1031.75 506.73 1313.18 1092.20 1859.73 59-1/4
7
TC10028/TC1201 Gate Valve Bro 6/4/1999 11:14 AM Page 11
FLS-R Seal
Cameron FLS-R Gate Valves incorporate
dual spring-loaded lip seals as shown
in this detail.
8
TC10028/TC1201 Gate Valve Bro 6/4/1999 11:16 AM Page 12
4-1/16 15,000 29.00 15.90 39.70 11.60 41.70 24.00 24.40 1550 19
5-1/8 10,000 29.00 15.90 40.40 12.60 42.40 24.00 26.60 1565 23.2
15,000 35.00 17.80 40.50 15.00 42.50 34.00 24.20 2980 24
D 6-3/8 10,000 35.00 17.40 45.70 14.60 47.70 34.00 30.00 2500 28.8
15,000 41.00 24.00 58.90 12.00 60.90 40.00 34.10 6780 15.4
G
7-1/16 10,000 35.00 18.90 47.70 18.10 49.70 34.00 29.00 3900 31
9 5000 41.00 23.00 53.20 9.75 55.20 24.00 33.70 4550 38.3
Additional sizes and working pressures are available. Contact your Cameron representative.
A
4-1/16 15,000 736.60 403.86 1008.38 294.64 1059.18 609.60 619.76 703.07 19
5-1/8 10,000 736.60 403.86 1026.16 320.04 1076.96 609.60 675.64 709.87 23.2
15,000 889.00 452.12 1028.70 381.00 1079.50 863.60 614.68 1351.70 24
6-3/8 10,000 889.00 441.96 1160.78 370.84 1211.58 863.60 762.00 1133.98 28.8
15,000 1041.40 609.60 1496.06 304.80 1546.86 1016.00 866.14 3075.35 15.4
7-1/16 10,000 889.00 480.06 1211.58 459.74 1262.38 863.60 736.60 1769.00 31
9 5,000 1041.40 584.20 1351.28 247.65 1402.08 609.60 855.98 2063.84 38.3
B
Additional sizes and working pressures are available. Contact your Cameron representative.
BB - General Service Alloy steel Alloy 718 AISI 410 nitrided Solid cobalt
alloy
or chrome-plated or 410, cobalt
Torque Comparison alloy hard-faced
9
TC10028/TC1201 Gate Valve Bro 6/4/1999 11:45 AM Page 13
M Gate Valves
10
TC10028/TC1201 Gate Valve Bro 6/4/1999 11:46 AM Page 14
E 2-1/16 2000 9.65 11.62 7.25 14.75 5.12 15.38 10.50 155 13
3000 9.81 14.62 7.25 14.75 5.12 15.38 12.75 155 13
5000 9.81 14.62 7.25 14.75 5.12 15.38 12.75 155 13
2-9/16 2000 12.38 13.12 8.00 15.50 5.94 16.31 12.75 210 15-1/2
3000 12.38 16.62 8.00 15.50 5.94 16.31 16.00 210 15-1/2
5000 12.38 16.62 8.00 15.50 5.94 16.31 16.00 210 15-1/2
D 3-1/8 2000 11.38 14.12 9.25 17.69 7.31 18.50 16.00 270 20
3000 11.38 17.12 9.25 17.69 7.31 18.50 16.00 270 20
5000 11.56 18.62 9.25 17.69 7.31 18.50 16.00 300 20
A 4-1/16 2000 14.62 17.12 12.25 21.31 9.06 22.50 20.00 380 24-1/2
3000 14.62 20.12 12.25 21.31 9.06 22.50 20.00 380 24-1/2
2-1/16 2000 245.11 295.15 184.15 374.65 130.05 390.65 266.70 70.31 13
3000 249.17 371.35 184.15 374.65 130.05 390.65 323.85 70.31 13
5000 249.17 371.35 184.15 374.65 130.05 390.65 323.85 70.31 13
2-9/16 2000 314.45 333.25 203.20 393.70 150.88 414.27 323.85 95.25 15-1/2
3000 314.45 422.15 203.20 393.70 150.88 414.27 406.40 95.25 15-1/2
5000 314.45 422.15 203.20 393.70 150.88 414.27 406.40 95.25 15-1/2
3-1/8 2000 289.05 358.65 234.95 449.33 185.67 469.90 406.40 122.47 20
3000 289.05 434.85 234.95 449.33 185.67 469.90 406.40 122.47 20
M Gate Valve - End View 5000 293.62 472.95 234.95 449.33 185.67 469.90 406.40 136.08 20
4-1/16 2000 371.35 434.85 311.15 541.27 230.12 571.50 508.00 172.37 24-1/2
3000 371.35 511.05 311.15 541.27 230.12 571.50 508.00 172.37 24-1/2
AA - General Service Alloy steel Alloy steel Alloy steel Alloy steel
DD - Sour Service * Alloy steel 17-4PH SS Alloy steel nitrided Alloy steel nitrided
11
TC10028/TC1201 Gate Valve Bro 6/4/1999 11:48 AM Page 15
12
TC10028/TC1201 Gate Valve Bro 6/4/1999 11:49 AM Page 16
13
Western Hemisphere
Cameron
PO Box 1212
Houston Texas 77251-1212
Tel 713 939 2211
Fax 713 939 2620
http://www.camerondiv.com
Eastern Hemisphere
Cooper Cameron (U.K.) Ltd.
205 Holland Park Avenue
London, WII 4XB
England
Tel 44 171 6020888
Fax 44 171 6027228
http://www.camerondiv.com
© Cooper Cameron Corporation, Cameron Division, Printed in USA, 3/99, TG/5M, WR10028/TC1201