Professional Documents
Culture Documents
Installation Manual EnUS 2708617227
Installation Manual EnUS 2708617227
Installation Instructions
EN Multiplex Addressable
Manual Pull Stations
FMM-7045, FMM-7045-D | Installation Instructions | 1.0 Description
3.0 Specifications
L L
o o
o
p
+
o
p Table 1: Specifications
-
HUNDREDS
0
1
2
0
2 1 XXX
9 01 901
Panel Single Point
8 2 8 2
7
6 5 4
3 7
6 5 4
3 Programming
TENS ONES
Type
Control Panel D7024 or DS9400 Series FACP (with
Requirements ROM version 2.0 or greater and a
D7039 or DS9431 Multiplex Expansion
Module installed). Refer to the D7024
Operation and Installation Guide (P/N:
31499) or the DS9400M/DS9400i
1- Previous device or D7039/DS9431 Installation Guide (P/N: 44578) for
specific programming information. Refer
2- Loop (+)
to the D7039 Installation Instructions
3- Loop (-) (P/N: 38685) or the DS9431
4- Other devices Installation Instructions (P/N:
41831) for multiplex wiring information.
Multiplex Bus Alarm: 0.55 mA
Average Current Standby: 0.55 mA
Draw
Optional Replacement Glass Break Rods (FMM-
Equipment 100GR)
Operating +32°F to +120°F (0°C to +49°C) non-
Temperature condensing RH
Listings and UL864
Approvals CSFM
Nominal Bus 12 VDC
Voltage