~B 0206— JIS B 0206
any
Unified Coarse Screw Threads
1. Scope
This Japanese Industrial Standard specifies the basic profile, and the
formal and basic size of unified coarse screw threads used for aircrafts and
otherwise only when especially required.
Reference: This unified coarse screw threads are coincident with the
coarse series screw threads of ISO inch screw threads
specified in 1SO 263.
2, Basic Profile, Formulae and Basic Size
2.1 Basic Profile The basic profiie is shown with the thick continuous line
in Figure.
Figure Basic Profile of Unified Coarse Screw Threads
Reference: This basic profile is coincident with the basic profile of ISO
general purpose screw threads specified in 1SO 68.
2.2 Formulae Formulse used for calculation of basic size shall be as follows:
pe BBO a5 4 decd 24
don(t-2MD)rase Dy
where a: number of thrend ridges per 25.4 mm
Remark: The numerical values in parenthese shall be the unit of inch
rounded off to a place of 0.0003 inch.
M8—B 0206—
2.3 Basi
Size The basic size shall be in accordance with Table,
‘able Basi
ze of Unified Coarse Screw Threads
Nominal designation of screw thread* Pate vane
pe ’
eo foe eter
a fonees” |
No VOUUNC | ote UNE |e) aoe | oF
No, 2-56 UNC ouss unc! ss | ous | ose
No. 340 uNc | wom unc] a | ose | aus
Ro. ea UNE en une} «| case | aoa
Ne, S40 UNC ens unc] w | case | om
No. 632 UNG esse unc] x2 | om] aoe
No. 6-32 UNC 0.16032 UNC | a2 o.ma8 | 0.430,
No, 1-2 UNC ermo2e une} a | Loses | as
Ne taune | emo usc] 2 | ues | os
Me? UNC | 0.2500-20 UNG tO Lameo | 0.687 | 6.350 sae | 4076
she UNC ame unc} | can] ama] roe} nen | oan
et6 UNC amsoas unc! i | rats | ass | ses] con | eos
4 UNC 0.4375-16 UNC “ ‘ana | oo | nz | oom | 9.149
els UNC asmoos unc} is | ose] vest | tame | nan | o.ses
thet UNC esasin unc} 2 | aur | ius | m2 | zo | 06
Shel UNC TY oeaso-tt u 2.2091 Las | as.a7s | 14376 | 43.376
yew UNC 0.380-10 wo | aswe | ss | isos
‘te 9 UNC asm-9 unc} 9 | seme | 1s | sos
T= UN TY Wawa aoe | a Se aan | as
Ue 7 UNE snr unc] or | sam] cow | avsts
Nie 7 UNC | taser unc} 1 | sam | tse | sum
Te # UNE | Tamme une | 6, Pane | aan | sca
le 6 UN ssa 6 unc] ¢ | cans | ean | ans
bes une unm s unc] —s_| seam | ano | oa
7-H, ONC zee. 6S UNC | a | Same | aes | ea
Bet UNC raw ssunc| oy | some | ness | stage
tha une num -s unc] 4 | ease | sor | se
Bie 4 UNC itm « unc] «| «xe | aar | oe
a= ene seems use] 4 | gssw | sar | s0300
Me 4 UNC aswo-4 unc] 4 | eas | aor | ene
Bie FUNC awe Ne | aaa aa
He 4 UNC are une} 4 | ase | set
4 -4uNe sos unc] 6 | aasm | ar
Note * The column 1 has priority to the column 2 and the latter is selected
when required. Those given in the column of reference mean the
Fominal designation of screw thread expressed by the decimal
system.
19