JIS B 0208
Unified Fine Screw Threads
1. Scope
This Japanese Industrial Standard specifies tho basic profile, formu!
dimensions for unified fine screw threads used for aircrafts
limited necassity.
id baste
ind othor purposes of
Reference: These unified fine screw threads conform to ISO inch fine series
scrow threads specified in ISO 263 (ISO inch screw threads,
General plan and selection for screws, bolts and nuts- Diameter
range 0.06 to 6 in).
2. Basic Profile, Formulas and Baste Dim
2.1 Basic Profile The basic profile is indicated by a h
Figure:
vy line in the following
Fig. Basic Profile for Unified Fine Serew Threads
Reference: This basic profite conforms to the basic profile of ISO general
purpose screw threads specified in ISO 68 (ISO general purpose
ads- Basic profile).
2.2 Formulag The formulas used for the calculation of basic dimensions shall be
as follows:
ro ye ass cecaynts bea
SAH Deeds
Deas
where, n: number of threads per 25.4 mm
Remark: The values in parentheses are those of inch unit rounded off to
‘0.0001 inch.
—161——B 0208—
2.3 Basic Dimensions The basic dimensions shall conform to the following Tabl.
Table.
Basic Dimensions for Unified Fine Screw Threads
Unit : mm
Designation of
screw threadt
Internal head
En 0] ta. ofS
External thread
2 (Reference) mew |cte
Ne nerf uaa] aan
Ne 193 UNF see | oe | ne
he. sam | ma | ss
Ne 3 UNF aon | nam | ae
we aue | sua) am
Ne aan | nam | saw
Ne aa | em
Ne ae | a0
(No. 10-32 UNF aaa
(No. 12-28 UNF aa | Gsay
sma | ae
naw | aan
ve | en | am
num | man | enw
vate | name | ana
waa | wan | aan
anes vies | wo | neon
wwe | we | an
wis | naw | aoe
Me 12 UNF ean
M412 UNF
s.000
Note# Screw threads in column 1 shall preferentially be chosen and, if
necessary, in column 2.
‘expressed by the decimal notation.
Designations in reference column are those