Professional Documents
Culture Documents
Brosur Valve Showa
Brosur Valve Showa
20101
BRONZE LEAD-LESS BRONZE
Now in the world,it has misgivings about influence on the human body by toxicity of lead.Lead is contained in
SCREWED copper alloy piping equipment including valves. In Japan, it has been provided by the Ministry of Welfare and Labor
Fig No. 53 54 55 106 107 that the ooze standard of lead should be 0.001mg/L or less in case of water supply lines and water service
Item 125−Gate N.R.S. 125−Swing Check 125−Globe 125−Gate R.S. 400−Ball(Full Bore) facilities. Our lead-less bronze valve clears this standard by our original surface treatmeatment method.
Material
Class 125Lb. 10K 16bar 125Lb.
※1 Bronze
10K 16bar 125Lb. 10K 16bar 125Lb. 10K 16bar 400Lb.
SCREWED
Connection NPT PT NPT PT NPT PT NPT PT NPT PT Fig No. 53N 54N 55N 56N
Standard ASME JIS BS ASME JIS BS ASME JIS BS ASME JIS BS ASME JIS BS Item 125NPb−Gate N.R.S. 125NPb-Swing Check 125NPb−Globe 150NPb−Y.Strainer
Working Pressure ● JIS/1.37MPa(−10〜120℃) ● 2.75MPa−WOG(38℃) Material ※1 Bronze
● BS/16bar(−10〜100℃) ● 0.69MPa−WOG(150° F) Class 125Lb. 10K 16bar 125Lb. 10K 16bar 125Lb. 10K 16bar 150Lb. 10K 25bar
● ASME/200PSI−WOG(100° F) Connection NPT PT NPT PT NPT PT NPT PT
Appearance Standard ASME JIS BS ASME JIS BS ASME JIS BS ASME JIS BS
Working Pressure ● JIS/1.37MPa(−10〜120℃) ● JIS/1.96MPa(−10〜120℃)
● BS/16bar(−10〜100℃) ● BS/25bar(−10〜100℃)
● ASME/200PSI−WOG(100° F) ● ASME/300PSI−WOG(100° F)
Appearance
● ASME/200PSI−WOG(100° F)
Appearance
Dimension L H W L H H H(0pen) W L H(0pen) W L H L D
1/4 inch 8㎜ 51 37 44 73 55
3/8 10 51 37 44 76 55 70 44
1/2 15 43 77 52 64 45 53 84 55 48 114 55 80 49 53 15
Dimension L H W L H W L H W
3/4 20 49 90 59 73 53 65 82 63 56 144 63 100 57 59 20 1/4 inch 8㎜ 42 37 84
1 25 54 102 59 89 64 77 113 70 62 178 70 115 72 67 25 3/8 10 44 37 84
11/4 32 60 114 69 111 79 85 134 80 67 204 80 135 82 78 32 1/2 15 39 69 54 48 37 84 48 34 75
11/2 40 64 133 75 118 88 100 154 90 71 231 90 160 98 84 40 3/4 20 44 72 54 56 40 84 59 42 108
2 50 71 163 85 140 105 119 187 110 82 294 110 195 121 98 50
343 1 25 47 84 54 63 50 118 67 45 108
21/2 65 87 202 102 95 125 230 150
119 396 11/4 32 53 98 61 74 54 118 81 55 122
3 80 98 224 103 140 239 180
11/2 40 57 116 77 84 66 134 90 59 122
4 100
2 50 61 125 77 93 70 134 104 72 185
※1 Bronze Material Standard Designation 21/2 65 71 153 83 118 88 200 130 83 185
ASTM C83600 3 80 87 186 105 138 98 200 149 103 250
JIS CAC406(BC6) 4 100 101 222 130 160 106 200
BS EN1982 CC491K
※2 Brass Material Stadard Designation
ASTM C37700
JIS C3771B
BS EN12165
1 2
SHOWA VALVE SHOWA VALVE
CAST IRON Gate Valve N.R.S. CAST IRON Gate Valve OS&Y
125Lb.Flanged 10K Flanged PN16 Flanged PN25 Flanged 125Lb.Flanged 10K Flanged PN16 Flanged PN25 Flanged 5K Flanged 10K Flanged
Fig No. 1 3 3 104 Fig No. 6 8 183 7 38
Body A126 Class B FC200 EN1561 GJL200 EN1561 GJL250 Body A126B FC200 EN1561 GJL200 FC200
Material Material
Trim C83600 CAC406(BC6) EN1982 CC491K EN1982 CC491K Trim C83600 or F6 CAC406(BC6)orSUS403 EN1982 CC491K or 410S21 CAC406(BC6) CAC406(BC6)orSUS403orSUS304
Standard ASME EN1171(BS5150) EN1171(BS5150) Standard ASME JIS EN1171(BS5150) JIS B2031 JIS B2031
Working Pressure ● 2"〜12"/200PSI−WOG(100°F) ● 1.37MPa(−10〜120℃) ● 16bar(−10〜120℃) ● 25bar(−10〜120℃) Working Pressure ● 2"〜12"/200PSI- WOG(100°F) ● 1.37MPa(−10〜120℃) ● 16bar(−10〜120℃) ● 25bar(−10〜120℃) ● 0.69MPa(120℃) ● 1.37MPa(120℃)
Appearance Appearance
125PSI−Steam
● 14"〜20"/150PSI−WOG(100°F)
100PSI−Steam
Appearance
Appearance
Dimension L H W L H W L H W L H W
11/4 inch 32 ㎜ 140 197 140 Dimension L H(Open) W L H(Open) W L H(Open) W
11/2 40 126 174 115 140 206 140 11/2 inch 40 ㎜ 190 253 160
2 50 142 207 122 150 235 140 150 235 140 180 343 200 2 50 203 265 180 200 265 180 203 265 180
21/2 65 146 234 148 160 266 160 160 266 160 190 373 200 2 1/ 2 65 216 289 200 220 289 200 216 289 200
3 80 153 265 158 175 293 160 175 293 160 200 424 224 3 80 241 329 224 240 329 224 241 329 224
4 100 190 319 165 200 360 224 200 360 224 230 474 250 4 100 292 367 280 290 367 280 292 367 280
5 125 205 373 195 225 406 224 225 406 224 250 534 280 5 125 330 398 315 360 398 315 330 398 315
6 150 218 429 220 250 453 224 250 453 224 270 601 300 6 150 356 457 355 410 457 355 356 457 355
8 200 230 532 245 290 710 355 8 200 495 561 450 500 561 450 495 561 450
10 250 330 839 400 10 250 622 665 500 620 665 500 622 665 500
12 300 350 949 450 12 300 698 803 560 700 803 560 698 803 560
Remark Compact Type For Pumping Z・F・B Trim available With indicator as Std. 14 350 787 890 600 787 890 600 787 890 600
16 400 914 1010 710 914 1010 710 914 1010 710
18 450 965 1120 800 965 1120 800 965 1120 800
20 500 978 1230 1000 978 1230 1000 978 1230 1000
Remark Z・F・B Trim available
3 4
SHOWA VALVE SHOWA VALVE
CAST IRON U-Strainer CAST IRON Check Valve
10K Flanged PN16 Flanged 10K Flanged PN16 Flanged 125Lb.Flanged 10K Flanged PN16 Flanged PN25 Flanged
Fig No. 191A(Quick Open Type) 191B(Bolted Cover Type) Fig No. 9 10 184
Body FC200 EN1561 GJL200 FC200 EN1561 GJL200 Body A126B FC200 EN1561 GJL200
Material Material
Screen SUS304 EN10088-1,1.4301 SUS304 EN10088-1,1.4301 Trim C83600 or F6 CAC406(BC6) or SUS403 EN1982 CC491K or410S21
Standard JIS BS JIS BS Standard ASME JIS EN12334(BS5153) BS(L-dm. is SHOWA original)
Working Pressure ● 1.37MPa(−10〜120℃) ● 16bar(−10〜120℃) ● 1.37MPa(−10〜120℃) ● 16bar(−10〜120℃) Working Pressure ● 2"〜12"/200PSI-WOG(100° F) ● 1.37MPa(−10〜120℃) ● 16bar(−10〜120℃) ● 25bar(−10〜120℃)
125PSI-Steam
● 14"〜24"/ 150PSI-WOG(100°
F)
100PSI-Steam
Appearance Appearance
Dimension L H1 H2 L H1 H2 L H1 H2 L H1 H2 Dimension L H L H L H L H
2 inch 50 ㎜ 267 158 194 267 158 194 267 86 194 267 86 194 11/2 inch 40 ㎜ 190 105
21/2 65 295 167 223 295 167 223 295 95 223 295 95 223 2 50 203 110 200 110 203 110 200 115
3 80 334 185 279 334 185 279 334 112 279 334 112 279 21/2 65 216 120 220 120 216 120 224 140
4 100 427 237 273 427 237 273 427 129 273 427 129 273 3 80 241 135 240 135 241 135 248 155
5 125 ー ー ー ー ー ー ー ー ー ー ー ー 4 100 292 155 290 155 292 155 298 178
6 150 497 260 469 497 260 469 497 150 469 497 150 469 5 125 330 180 360 180 330 180 372 205
8 200 685 330 685 685 330 685 685 190 685 685 190 685 6 150 356 200 410 200 356 200 426 241
10 250 838 400 790 838 400 790 838 318 790 838 318 790 8 200 495 230 500 230 495 230 516 290
12 300 857 430 1114 857 430 1114 857 350 1114 857 350 1114 10 250 622 305 620 305 622 305
Remark Because cover can be opened and shut 12 300 698 355 700 355 698 355
one-touch,cleaning of the screen is easy. 14 350 570 410 570 410 570 410
16 400 630 470 630 470 630 470
h 18 450 700 520 700 520 700 520
●Punching Screen for U-Strainer 20 500 770 570 770 570 770 570
h P equivalent 24 600 920 650 920 650 920 650
Size2"〜4" 1.5㎜ 2.5㎜ 15mesh Type Swing Check Swing Check Swing Check Swing Check
Size6"〜12" 2.5㎜ 3.5㎜ 10mesh Remark Z・F・B Trim available Z・F・B Trim available
P
CAST IRON Y-Strainer CAST IRON Ball Valve CAST IRON Check Valve
125Lb.Flanged 10K Flanged PN16 Flanged 10K Flanged 10K Flanged Wafer
Fig No. 33 Fig No. 78
Fig No. 39 12 119 40 68WL
Body A126B FC200 EN1561 GJL200 Body FC200
Material Body FC200
Screen A182 F304 SUS304 EN10088-1,1.4301 Ball SCS13A Material
Material Trim CAC406(BC6) or SUS403 FC/Rubber(NBR) SCS13/Rubber(NBR) CAC406(BC6) /Rubber(NBR) Rubber(NBR)/CAC406(BC6)
Standard ASME JIS BS Seat PTFE
Standard JISB2031 SHOWA original SHOWA original/EN12334
Working Pressure ● 2"〜12"/200PSI-WOG(100°
F) ● 1.37MPa(−10〜120℃) ● 16bar(−10〜120℃) Shaft SUS304
Working Pressure ● 1.37MPa(−10〜120℃) ● 1.37MPa(−10〜80℃) ● 1.37MPa(−10〜80℃) ● ASME125 200PSI−WOG(below80℃)
● 2"〜12"/125PSI-Steam Design 2pcs.
● BS−PN16 16bar(below80℃)
●14"〜20"/150PSI-WOG(100°
F) Full Bore
Bore ● JIS10K 1.37MPa(below80℃)
● 2"〜12"/100PSI-Steam
Working Pressure ●1.37MPa-WOG(120℃)
Appearance Appearance Appearance
Dimension L H L H L H
11/2 inch 40 ㎜ Dimension L H L H L H L L
2 50 220 135 220 135 220 135 Dimension L H W 11/2 inch 40 ㎜ 145 120 160 100 90
21/2 65 270 179 270 179 270 179 1/ 2 inch 15 ㎜ 110 90 175 2 50 200 115 160 130 180 110 90 54
3 80 290 190 290 190 290 190 3/ 4 20 120 95 175 21/2 65 220 132 175 140 200 120 100 54
4 100 350 238 350 238 350 238 1 25 130 100 175 3 80 240 145 185 150 210 135 115 57
5 125 390 270 390 270 390 270 11/4 32 140 105 175 4 100 290 170 230 165 215 145 135 64
6 150 440 321 440 321 440 321 11/2 40 165 130 235 5 125 360 200 255 180 255 165 150 70
8 200 540 384 540 384 540 384 2 50 180 140 235 6 150 410 225 290 200 280 180 175 76
10 250 680 495 680 495 680 495 21/2 65 190 155 330 8 200 500 260 220 95
12 300 840 574 840 574 840 574 3 80 200 170 330 10 250 280 108
14 350 910 661 910 661 910 661 4 100 230 180 330 12 300 143
16 400 1000 760 1000 760 1000 760 5 125 300 230 700 14 350 184
18 450 1100 850 1100 850 1100 850 6 150 340 260 700 16 400 191
8 200 450 290 1000 18 450 203
●Punching Screen for Y-Strainer
h 10 250 530 ー ー 20 500 219
h P equivalent
12 300 620 ー ー 24 600 222
Size2"〜4" 1.5㎜ 2.5㎜ 15mesh
Remark ● Gear Ope. for Size 250mm and Type Swing Check Swing Check Lift Check Lift Check Dual Plate Check
Size5"〜12" 2.0㎜ 3.0㎜ 12mesh ● 300mm Remark With by-Pass as Std. Quick Close Type Quick Close Type Quick Close Type
Size14"〜16" 2.5㎜ 3.5㎜ 10mesh
Size18 5.0㎜ 8.0㎜ 5mesh P
5 6
SHOWA VALVE SHOWA VALVE
DUCTILE IRON Gate Valve DUCTILE IRON Swing Check Valve Lift Check Valve
150Lb.Flanged 10K Flanged 16K Flanged PN25 Flanged PT.Screwed 10K Flanged 150Lb.Flanged 10K Flanged 16K Flanged PN25 Flanged PT.Screwed 10K Flanged
Fig No. 192 69 183D 270 271 Fig No. 194 70 274 275
Body A536 65-45-12 FCD450-10 EN1563 GJL450-10 FCD-S Material Body A536 65-45-12 FCD450-10 EN1563 GJL450-10 FCD-S
Material Trim C83600 or F6 CAC406(BC6) or SUS403 EN1982 CC491K or 410S21 13Cr.
Trim C83600 or F6 CAC406(BC6) or SUS403 EN1982 CC491K or 410S21 13Cr.
Standard ASME JIS JIS(JV) BS(L-dm. is SHOWA original) JIS(JV)
Standard ASME JIS JIS(JV) EN1171(BS5150) JIS(JV) Working Pressure ● 250PSI-WOG(−29〜38℃) ●1.37MPa-Water(120℃) ● 2.16MPa-Water(120℃) ● 25bar(−10〜120℃) ● 1.37MPa-Water(120℃)
Working Pressure ● 250PSI−WOG(−29〜38℃) ●1.37MPa-Water(120℃) ●2.16MPa-Water(120℃) ●25bar(−10〜120℃) ●1.37MPa-Water(120℃) ● 150PSI-Steam ●1.18MPa-WOG(220℃) ● 1.96MPa-WOG(220℃) ● 0.98MPa-WOG(220℃)
● 150PSI-Steam ●1.18MPa-WOG(220℃) ●1.96MPa-WOG(220℃) ●0.98MPa-WOG(220℃)
Appearance
Appearance
Dimension L H L H L H L H L H L H
1/2 inch 15 ㎜ 65 40 85 40
3/4 20 80 45 95 45
1 25 90 52 110 52
11/4 32 105 58 130 58
Dimension L H(Open) W L H(Open) W L H(Open) W L H(Open) W L H(Open) W L H(Open) W 68
11/2 40 120 68 150
1/2 inch 15 ㎜ 60 159 70 90 159 70 2 50 203 110 230 110 230 115 200 110 140 76 180 76
3/4 20 70 179 80 100 179 80 21/2 65 216 120 216 120 216 130 220 120
1 25 75 215 90 110 215 90 3 80 241 135 241 135 241 155 240 155
11/4 32 85 237 100 120 237 100 4 100 292 155 292 155 292 180 290 178
5 125 330 180 330 180 330 215 360 205
11/2 40 95 284 115 130 284 115
6 150 356 200 356 200 356 240 410 241
2 50 178 308 160178 308 160 178 355 180 216 361 200 105 318 135 140 318 135 8 200 495 230 495 230 495 295 500 290
21/2 65 190 358 180190 358 180 190 407 180 241 400 200 10 250 622 305 622 305 622 335 600 355
3 80 203 404 180203 404 180 203 473 224 283 447 224 12 300 698 355 698 355 698 380 700 375
4 100 229 498 224229 498 224 229 556 250 305 529 280 Remark Bronze trim available only for water 120℃ and below.
5 125 254 588 224254 588 224 254 665 280 381 633 280
6 150 267 708 250267 708 250 267 772 300 403 746 300
8
10
200
250
292 918
330 1120
280
300
292 918 280 292
330 1120 300 330 1172
965 315
400
419
457
936
1141
355
400
DUCTILE IRON Dual Plate Check Valve
12 300 356 1312 355356 1312 355 356 1371 450 502 1334 500
14 350 381 1539 450 150Lb.Wafer 10K Wafer 16K Wafer PN25 Wafer
16 400 406 1793 500 Fig No. 114W 116WL
18 450 432 1995 560 Material Body A536 65-45-12 FCD450-10 EN1563 GJL450-10
20 500 457 2194 600 Trim Rubber(NBR)/C83600 Rubber(NBR)/CAC406 Rubber/EN1982 CC491K
24 600 508 2670 710 Standard ASME JIS EN12334
Remark Bronze trim available only for water 120℃ and below. Working Pressure ● 250PSI-WOG(below80℃) ● 1.37MPa(below80℃) ● 2.16MPa(below80℃) ● 25bar(below80℃)
Appearance
Appearance
DUCTILE IRON Y-Strainer
150Lb.Flanged 10K Flanged 16K Flanged PN25 Flanged
Fig No. 195 196
Material Body A536 65-45-12 FCD450-10 EN1563 GJL450-10
Screen A182 F304 SUS304 EN10088-1,1.4301
Dimension L H(Open) W L H(Open) W L H(Open) W L H(Open) W L H(Open) W L H(Open) W Standard ASME JIS BS
1/2 inch 15 ㎜ 65 112 70 85 112 70 Working Pressure ● 250PSI-WOG(−29〜38℃) ● 1.37MPa-Water(120℃) ● 2.16MPa-Water(120℃) ● 25bar(−10〜120℃)
7 8
SHOWA VALVE SHOWA VALVE
CAST STEEL(API/ASME/BS) General Specification and Standard CAST STEEL(JIS) General Specification and Standard
(1) Basic Standard ● Gate Valve : API 600/ASME B16.34/BS1414 (1) Basic Standard : JIS B2071 for 10K/20K Flanged (5) Pressure-Temperature Ratings
● Swing Check Valve : API 6D/ASME B16.34/BS1868 : ASME B16.34 Class 300 for 30K Flanged Max.Working Pressure(MPa)
● Globe Valve
Max.Working Temperature
: ASME B16.34/BS1873 (2) Shell Wall Thickness : JIS B2071 a1 for 10K/20K Flanged class 10K class 20K class 30K
(2) Shell Wall Thickness : API 600 : Steam、Air、Gas、Oil(425℃) ー 2.0 3.0
API 600 Class 300 for 30K Flanged Steam、Air、Gas、(400℃)
(3) Face To Face Dimensions : ASME B16.10/BS2080/ISO5752 ー 2.3 3.4
(3) Face To Face Dimensions : JIS B2071 for 10K/20K Flanged Steam、Air、Gas、 Water(350℃) ー 2.6 3.8
(4) Flange Dimensions : ASME B16.5/BS1560/ISO2229
(5) Pressure-Temperature Ratings : ASME B16.5/ASME B16.34 : ASME B16.10 Class 300 for 30K Flanged Steam、Air、Gas、 Water(300℃) 1.0 2.9 4.3
(4) Flange Dimensions : JIS B2220 Steam、Air、Gas、 Water(220℃) 1.2 3.1 4.6
Temperature(℃) -29〜38 93 149 204 260 316 343 371 399 427 Water(120℃) 1.4 3.4 5.0
Working class 150 1.97 1.79 1.59 1.38 1.17 0.97 0.86 0.76 0.66 0.55
Pressure
(MPa)
class 300
class 600
5.10
10.21
4.66
9.31
4.52
9.07
4.38
8.76
4.14
8.28
3.79
7.55
3.69
7.41
3.69
7.34
3.48
6.97
2.83
5.69 CAST STEEL(JIS) Gate Valve OS&Y
CAST STEEL(API/ASME/BS) Gate Valve OS & Y 10K Flanged 20K Flanged 30K Flanged
Fig No. 84 87 118
150Lb.Flanged 300Lb.Flanged 600Lb.Flanged Material Body
Trim
SCPH2
13Cr.
Fig No. 14 17 20 Working Pressure See(5)Pressure-Temperature Ratings
Material Body ASTM A216 WCB Appearance
Trim API Trim No8.(Body Seat=Stl.,Disc Seat=13Cr., Stem=13Cr.)
Working Pressure See(5)Pressure-Temperature Ratings
Appearance
Dimension L H L H L H
11/2 inch 40 ㎜ 165 144 241 148 241 148
2 50 203 163 267 156 267 156
2 1/ 2 65 216 174 292 177 292 177
Dimension L H L H L H 3 80 241 185 318 185 318 185
2 inch 50 ㎜ 203 156 267 167 292 215 4 100 292 211 356 224 356 224
21/2 65 216 170 292 185 330 240 5 125 330 222 400 250 400 250
3 80 241 180 318 242 356 275 6 150 356 290 444 271 444 271
8 200 495 342 533 324 533 324
4 100 292 217 356 262 432 310
10 250 622 386 622 370 622 370
6 150 356 316 445 340 559 390 12 300 698 428 711 412 711 412
8 200 495 365 533 400 660 470
10 250 622 410 622 440 787 520
12 300 698 450 711 490 CAST STEEL Globe Valve
CAST STEEL(API/ASME/BS) Globe Valve 10K Flanged 20K Flanged 30K Flanged
Fig No. 86 89 141
150Lb.Flanged 300Lb.Flanged 600Lb.Flanged Material Body SCPH2
Trim 13Cr.
Fig No. 16 19 22 Working Pressure See(5)Pressure-Temperature Ratings
Material Body ASTM A216 WCB Appearance
Trim API Trim No8.(Body Seat=Stl.,Disc Seat=13Cr., Stem=13Cr.)
Working Pressure See(5)Pressure-Temperature Ratings
Appearance
9 10
SHOWA VALVE SHOWA VALVE
FORGED STEEL General Specification and Standard FORGED STEEL Globe Valve
(1) Basic Standard ● Gate Valve : API 602/JPI-7S-57/ASME B16.34
Screw Socket Weld 10K Flanged 20K Flanged 30K Flanged 40K Flanged 150Lb. Flanged 300Lb. Flanged 600Lb. Flanged
● Check Valve : JPI-7S-57/ASME B16.34
Fig No. 210 211 212 213 214 215 216 217 218
● Globe Valve : JPI-7S-57/ASME B16.34
Body SFVC2A(ASME A105)
Material
(2) Face To Face Dimensions (Flange Type) : ASME B16.10 , ASME B16.10 Class 300 for 10K/150Lb. Flanged Trim API Trim No.8(Body Seat=Stl. Disc Seat=13Cr. Stem=13Cr.)
: JIS B2220 10K/20K/30K/40KF and ASME B16.5 Class 150/300/600 Working Pressure See(6)Pressure-Temperature Ratings
(3) Flange Dimensions (Flange Type)
Appearance
(4) Screw Dimensions (Screw Type) : JIS B0203Rc (PT) or ASME B16.11
(5) Socket Weld Dimensions (Socket Weld Type) : JIS B2316 or ASME B16.11
Temperature(℃) -29
93 149 204 260 316 343 371 399 427
〜38
Class 150 1.97 1.79 1.59 1.38 1.17 0.97 0.86 0.76 0.66 0.55
Working Pressure
(MPa) Class 300
Class 600
5.10
10.21
4.66
9.31
4.52
9.07
4.38
8.76
4.14
8.28
3.79
7.55
3.69
7.41
3.69
7.34
3.48
6.97
2.83
5.69
FORGED STEEL Lift Check Valve
Screw Socket Weld 10K Flanged 20K Flanged 30K Flanged 40K Flanged 150Lb. Flanged 300Lb. Flanged 600Lb. Flanged
FORGED STEEL Gate Valve OS&Y Fig No.
Material
Body
219 220 221 223
SFVC2A(ASME A105)
224 225 226 227 228
Fig No. 201 202 203 204 205 206 207 208 209
Body SFVC2A(ASME A105)
Material
Trim API Trim No.8(Body Seat=Stl. Disc Seat=13Cr. Stem=13Cr.)
Working Pressure See(6)Pressure-Temperature Ratings
Appearance
L
Dimension L H H
10K 20K 30K 40K 150Lb. 300Lb. 600Lb.
1/ 2 inch 15 ㎜ 79 49 152 152 165 165 152 152 165 49
L 3/ 4 20 92 54 178 178 190 190 178 178 190 54
Dimension L H(Open) W H(Open) W
10K 20K 30K 40K 150Lb. 300Lb. 600Lb. 1 25 111 73 203 203 216 216 203 203 216 73
1/ 2 inch 15 ㎜ 79 160 102 140 140 165 165 140 140 165 160 102 1 1/ 4 32 120 101 216 216 229 229 216 216 229 101
3/ 4 20 92 160 102 152 152 190 190 152 152 190 160 102 1 1/ 2 40 152 101 229 229 241 241 229 229 241 101
1 25 111 190 121 165 165 216 216 165 165 216 190 121 2 50 172 121 267 267 292 292 267 267 292 121
1 1/ 4 32 120 252 146 178 178 229 229 178 178 229 252 146
1 1/ 2 40 120 252 146 190 190 241 241 190 190 241 252 146
2 50 140 280 178 216 216 292 292 216 216 292 280 178
11 12
SHOWA VALVE SHOWA VALVE
STAINLESS STEEL Gate・S/Check・Globe Valve・ STAINLESS STEEL Gate・S/Check・Globe Valve・
Y-Strainer Y-Strainer
SCREWED 300Lb. /20K Flanged
Fig No. 95 96 97 98 Fig No. 121-3 121-4 122-3 122-4 123-3 123-4 124-3 124-4
Item 200 Gate N.R.S 200 Swing 200 Globe 200 Y-Strainer Item Gate OS&Y Swing Globe Y-Strainer
Body CF8M(SCS14A) Body CF8(SCS13A) CF8M(SCS14A) CF8(SCS13A) CF8M(SCS14A) CF8(SCS13A) CF8M(SCS14A) CF8(SCS13A) CF8M(SCS14A)
Material Material
Trim 316 S/Steel 304 S/Screen Trim 304 S/Steel 316 S/Steel 304 S/Steel 316 S/Steel 304 S/Steel 316 S/Steel 304 S/S Screen 316 S/S Screen
Class 10K 16bar150Lb. 10K 16bar 150Lb. 10K 16bar 150Lb. 10K 16bar 150Lb. Working Pressure ● 20K/3.33MPa(-10〜120℃)
● 300Lb./720PSI(100°
F)
Screw PT NPT PT NPT PT NPT PT NPT
Standard JIS BS ASME JIS BS ASME JIS BS ASME JIS BS ASME
Working Pressure ● JIS/1.37MPa(-10〜120℃) Appearance
● BS/16bar(-10〜100℃)
● ANSI/275PSI(100°F)
Appearance
● PN16/16bar(-10〜100℃)
Design 1-PC.Body 2-PC.Body 2-PC.Body
● 150Lb./275PSI(100°
Bore Reduce Full Full
F)
Working Pressure ● 5.52MPa(-10〜38℃) ● 6.89MPa(-10〜38℃) ● 10K/1.37MPa(-10〜120℃) ● 20K/2.84MPa(0〜120℃)
Appearance
L
L L L L Dimension L H W L H W H W L H W
Dimension H(Open) W H H(Open) W H 10K 150Lb.
150Lb/10K PN16 150Lb/10K PN16 150Lb/10K PN16 150Lb/10K PN16 1/4 inch 8㎜ 39 34 69 52 56 102
1/2 inch 15 ㎜ 108 130 182 120 112 130 51 108 130 178 140 120 130 79 3/8 10 44 38 81 52 56 102
3/4 20 117 150 195 120 125 150 54 117 150 181 140 140 150 87 1/2 15 59 41 96 58 65 123 110 108 85 160 140 85 160
1 25 127 160 237 120 127 160 64 127 160 208 140 150 160 114 3/4 20 60 45 96 67 68 123 120 117 90 160 152 90 160
11/4 32 140 180 294 200 140 ー 68 140 ー 243 160 180 180 118 1 25 72 52 116 78 79 153 130 127 100 160 165 100 160
11/2 40 165 200 294 200 165 200 75 165 200 245 160 190 200 135 11/4 32 77 57 116 90 84 153 140 140 105 160 ー ー ー
2 50 178 230 335 200 203 230 97 203 230 258 200 210 230 152 11/2 40 84 62 158 104 94 183 165 165 110 206 190 110 206
21/2 65 190 290 393 200 216 290 111 216 290 310 200 250 290 189 2 50 100 68 158 128 100 183 180 178 120 206 216 120 206
3 80 203 310 467 250 241 310 120 241 310 325 250 280 310 201 21/2 65 158 135 246 190 190 160 324 241 160 324
4 100 229 350 549 250 292 350 162 292 350 390 250 340 350 231 3 80 186 145 246 200 203 170 324 283 170 324
5 125 254 400 630 300 330 400 179 356 400 472 300 380 400 275 4 100 ー ー ー 230 229 185 324 305 185 324
6 150 267 480 743 300 356 480 203 406 480 531 350 420 480 325 5 125 300 356 260 650 381 260 650
8 200 292 600 910 350 495 600 236 495 600 669 350 500 600 396 6 150 340 394 280 650 403 280 650
10 250 330 730 1097 400 622 730 302 622 730 824 400 730 730 512 8 200 450 457 340 850 502 340 850
12 300 356 850 1285 400 698 850 340 698 ー 10 250 530 533 ※ ※ 568 ※ ※
12 300 610 610 ※ ※ ー ※ ※
Remark ※Gear Ope. as Std.
PN25/PN40 Flanged available
13 14
SHOWA VALVE SHOWA VALVE
PLASTIC Diaphragm Valve PLASTIC Ball Valve
Screw Socket 10K Flanged Screw Socket
Fig No. 241 242 243 Fig No. 247 248
Material HV-Diaphragm Valve Item HV-Single Union Ball Valve
Body/Bonnet U-PVC, C-PVC, PP or PVDF Body U-PVC
Diaphragm EPDM,FPM or PTEE Material Seat PTFE
Stem C3602 Ball U-PVC
Bt/Nt SUS304 Working Pressure 1.0MPa(0〜60℃)
Working U-PVC(0〜60℃) Appearance
Pressure C-PVC(0〜90℃) 1.0MPa(DN15〜80㎜)
PP(-20〜90℃) 0.7MPa 0.5MPa(DN100〜150㎜)
PVDF(-40〜120℃) 0.3MPa(DN200㎜)
Appearance
Dimension L H W
1/2 inch 15 ㎜ 96 48 78
3/4 20 112 58 92
1 25 122 65 100
11/4 32 140 76 110
Dimension L H W L H W 11/2 40 150 88 121
1/ 2 inch 15 ㎜ 180 128 95 110 126 95 2 50 183 108 147
3/ 4 20 207 138 95 120 137 95
1 25 224 144 110
ー
130 144 110 Screw Socket 10K Flange
1 1/ 4 32 ー ー 180 220 150
1 1/ 2 40 176 220 150 180 220 150 Fig No. 249 250 251
2 50 317 225 150 210 225 150 Item HV-Double Union Ball Valve
2 1/ 2 65 250 270 210 Body U-PVC,C-PVC, PP or PVDF
3 80 280 343 210 Material Seat PTFE
4 100 340 383 250 Ball U-PVC,C-PVC, PP or PVDF
5 125 ー ー ー Working U-PVC(0〜50℃)
150 480 476 410 Pressure C-PVC(0〜90℃) 1.0MPa
6
8 200 570 627 405 PP(-20〜80℃)
PVDF(-20〜100℃)
Appearance
15 16
SHOWA VALVE SHOWA VALVE
PLASTIC Swing Check Valve PLASTIC U-Type/Y-Type Strainer
10K Flanged 10K Flanged Screw Socket 10K Flanged
Fig No. 252 Fig No. 260 261 262 263
Item HV-Swing Check Valve Item HV-U-Strainer HV-Y-Strainer
Body U-PVC, C-PVC, PP or PVDF Body U-PVC or C-PVC
Material *
Material Disc U-PVC, C-PVC, PP or PVDF Screen SUS304 or SUS316
Seat EPDM, FPM, NBR, or PTFE Working 1.0MPa(DN15〜65㎜)
Hinge Pin PTFE Pressure U-PVC(0〜50℃) 0.6MPa(DN80〜100㎜)
Working U-PVC(0〜50℃) 0.6MPa(DN15〜65㎜) C-PVC(0〜90℃) 0.5MPa(DN150㎜)
Pressure C-PVC(0〜80℃) 0.5MPa(DN80〜100㎜) 0.4MPa(DN200㎜)
PP(-20〜80℃) 0.4MPa(DN125㎜) Appearance
PVDF(-20〜100℃) 0.3MPa(DN150〜200㎜)
Appearance
Dimension L H
1/2 inch 15 ㎜ 140 93 Dimension L H L H L H L H
3/4 20 140 93 1/2 inch 15 ㎜ 95 67 192 92 160 122
1 25 160 118 3/4 20 109 77 221 111 175 132
11/4 32 180 136 1 25 127 91 248 128 202 166
11/2 40 180 137 11/4 32 170 123 325 160 245 199
2 50 200 165 11/2 40 170 123 333 170 247 200
21/2 65 240 170 2 50 200 166 193 144 372 203 292 225
3 80 260 170 21/2 65 240 170
4 100 300 216 3 80 260 170
5 125 ー ー 4 100 300 216
6 150 400 286 6 150 400 286
8 200 500 336 8 200 500 336
*Select 20,40 or 60 mesh
Dimension L L H H
1/2 inch 15 ㎜ 90 111 136 153
3/4 20 107 138 152 168
1 25 120 150 164 179
11/4 32 154 190 195 213
11/2 40 154 190 195 213
2 50 177 219 240 260
21/2 65 263 307 310 332
3 80 263 308 310 332
4 100 321 364 382 404
17 18
SHOWA VALVE SHOWA VALVE
BUTTERFLY VALVE TG-Series BUTTERFLY VALVE VF-Series
WAFER LUG WAFER LUG FLANGED
Fig No. 139 140 142 143 Fig No. 229 230 231 232 233
Item TGW-Lever Type TGW-Gear Type TGL-Leven Type TGL-Gear Type Item VFW-Lever Type VFW-Gear Type VFL-Lever Type VFL-Gear Type VFF-Gear Type
Material and Material and
See(8) Material and Working Pressure See(7) Material and Working Pressure
Working Pressure Working Pressure
Appearance Appearance
Dimension L H W L H W L H W L H W Designation L H W L H W L H W L H W L H W
2 inch 50 ㎜ 43 193 162 43 198 150 43 193 162 43 198 150 11/2 inch 40 ㎜ 33 181 200 33 157 150 33 181 200 33 157 150
21/2 65 46 207 267 46 212 150 46 207 267 46 212 150 2 50 43 204 200 43 180 150 43 204 200 43 180 150
3 80 46 213 267 46 218 150 46 213 267 46 218 150 21/2 65 46 216 200 46 192 150 46 216 200 46 192 150
4 100 52 232 267 52 237 150 52 232 267 52 237 150 3 80 46 223 200 46 199 150 46 223 200 46 199 150
5 125 56 245 267 56 250 150 56 245 267 56 250 150 4 100 52 242 200 52 218 150 52 242 200 52 218 150
6 150 56 258 267 56 263 150 56 258 267 56 263 150 5 125 56 258 250 56 234 150 56 258 250 56 234 150
8 200 60 305 361 60 305 300 60 305 361 60 305 300 6 150 56 271 250 56 247 150 56 271 250 56 247 150
10 250 68 336 300 68 336 300 8 200 60 308 355 60 282 200 60 308 355 60 282 200
12 300 78 380 300 78 380 300 10 250 68 354 355 68 328 200 68 354 355 68 328 200
14 350 78 411 300 78 411 300 12 300 78 377 355 78 351 200 78 377 355 78 351 200
16 400 102 463 300 102 463 300 14 350 78 370 310 78 370 310
18 450 114 485 400 114 485 400 16 400 102 402 310 102 402 310
20 500 127 557 300 127 557 300 18 450 114 445 400 114 445 400
20 500 127 479 400 127 479 400 160 479 400
24 600 154 548 400 154 548 400 170 548 400
28 700 165 589 400
30 750 190 713 400
●TG-Series Butterfly Valve…
32 800 190 744 400
(1) Basic Standard Conforming to JIS B2032(Centric disc &., Shaft positic) 36 900 203 805 400
(2) Face to Face Dimensions Conforming to JIS B2002, ISO 5752-S and BS EN558-1 ●VF-Series Butterfry Valve…
(3) Flange Connections Available for JIS-5k・10k, ASME-125Lb・150Lb.,BS-PN16 (1) Basic Standard Conforming to JIS B2032(Centric disc &, Shaft position)
(Please clarify Flange std.on order stage) (2) Face to Face Dimensions Conforming to JIS 2002, ISO 5752-S and BS EN558-1
JIS-5k is not available for size 350mm and larger (3) Flange Connections Available for JIS-10k, ASME-125Lb・150Lb.,BS-PN16 (Please clarify Flange Std.on order stage)
(4) Design of Connections Wafer and Lug (4) Design of Connections Wafer, Lug and Flange Type
(5) Size 50〜500mm (5) Size 40〜900mm
(6) Seat Liner Type for easy maintenance(Not suitable for vacuum) (6) Seat Liner Type for easy maintenance(Not suitable for vacuum)
(7) Coating Powder Epoxy Coating(Blue Color) (7) Material and Working Pressure
(8) Material and Working Pressure
Parts Material
Material No. Working Pressure
Parts Material Body Disc Seat Shaft
Item No. Working Pressure
Body Disc Seat Shaft VFW-1、VFL-1、VFF-1 Ductile Iron EPDM
+Nylon11 410 S/Steel
VFW-2、VFL-2、VFF-2 NBR
TGー1 Ductile Iron EPDM
+Ni-Plated VFW-3、VFL-3、VFF-3 EPDM
TGー2 Cast Iron NBR Cast Iron 304 S/Steel 304 S/Steel
431 S/Steel VFW-4、VFL-4、VFF-4 NBR
TGー3 Ductile Iron EPDM VFW-5、VFL-5、VFF-5 EPDM
304 S/Steel Size 300㎜ & below : 1.18MPa 316 S/Steel 316 S/Steel
TGー4 for BS-PN16 NBR VFW-6、VFL-6、VFF-6 NBR
size 350mm Size 350㎜ & above : 0.98MPa
TGー5 EPDM VFW-7、VFL-7、VFF-7 Ductile lron EPDM
and larger 316 S/Steel (1.57MPa for BS-PN16) +Nylon11 410 S/Steel Size 300mm &.,below:1.57MPa
VFW-8、VFL-8、VFF-8 NBR
TGー6 NBR
431 S/Steel VFW-9、VFL-9、VFF-9 EPDM Size 350mm &.,above:0.98MPa
TGー7 EPDM Ductile Iron 304S/Steel 304 S/Steel
ALBC VFW-10、VFL-10、VFF-10 NBR
TGー8 NBR VFW-11、VFL-11、VFF-11 EPDM
316 S/Steel 316 S/Steel
(9) Working Temperature VFW-12、VFL-12、VFF-12 NBR
VFW-13、VFL-13、VFF-13 EPDM
304 S/Steel 304S/Steel 304 S/Steel
Seat Material VFW-14、VFL-14、VFF-14 NBR
NBR EPDM VFW-15、VFL-15、VFF-15 EPDM
316 S/Steel 316 S/Steel 316 S/Steel
VFW-16、VFL-16、VFF-16 NBR
0〜80℃ -10〜120℃
(8) Working Temperature
(10) Dewdrops-Proof Insulation is attached between body and actuater on request Seat Material
(11) Long Neck Type Sufficient space for insulation NBR EPDM CR SILICON HYPALON VITON
19 20
SHOWA VALVE SHOWA VALVE
BUTTERFLY VALVE HP-Series BUTTERFLY VALVE HP-Series
WAFER (3) Face to Face Dimensions Conforming to JIS B2002, ISO 5752-S and BS EN558-1
Fig No. 129 130 (4) Flange Connections Available for JIS-10k・16k・20k and ASME-150Lb.・300Lb
Item HPW-Lever Type HPW-Gear Type
Material See(7) Material (5) Design of Connections Wafer(Available for Lug Type)
Working Pressure See(8) Working Pressure and Temparature
Appearance (6) Size 50〜600mm
(7) Material
Parts Material
Material No.
Body Disc ※Seat Shaft
HPー1 304 S/Steel 304 S/Steel PTFE 304 S/Steel
HPー2 316 S/Steel 316 S/Steel PTFE 316 S/Steel
HPー3 Cast Steel 304 S/Steel PTFE 304 S/Steel
※ RPTFE for Temperatur more than 160℃
Dimension L H W L H W
21/2 inch 65 ㎜ 46 247 200 46 222 150
3 80 46 272 200 46 247 150 (8) Working Pressure and Temperature
4 100 52 289 250 52 264 150 Working Pressure(MPa)
5 125 56 302 355 56 282 200 Temperatur(℃) Material of Seat
Size 300mm and below Size 350mm and adove
6 150 56 317 355 56 297 200
8 200 60 341 310 ー29〜38 1.97 0.99
10 250 68 381 310 66 1.88 0.94
12 300 78 443 400 93 1.79 0.90
14 350 78 479 400 PTFE
121 1.69 0.85
16 400 102 546 400
18 450 114 571 400 149 1.59 0.80
20 500 127 606 400 177 0.97 0.49
24 600 154 785 400 RPTFE
204 0.35 0.18
21 22
SHOWA VALVE SHOWA VALVE
BUTTERFLY VALVE MS-Series BUTTERFLY VALVE MS-Series
(4) Basic Std. Metal Seal-Triple Eccentric Structare, conforming to API 609
(5) Face to Face Dimensions ●10KW/10KL/150W/150L : ISO5752 Table5-S
●10KF/150F : ISO5752 Table4-L
●20KW/20KL/300W/300L : API609 Table2-Class300
●20KF/300F : ISO5752 Table4-L
Note=API609 Table2-Class150 is available for size 350mm of 10KW/10KL/150W/150L
(6) Flange Connections ●JIS 10K for 10KW/10KL/10KF
●JIS 16K and 20K for 20KW/20KL/20KF
●ASME 150Lb. for 150KW/150KL/150KF
●ASME 300Lb. for 300KW/300KL/300KF
(7) Design ot Connections Wafer,Lug and Flanged
(8) Size 80〜600mm
(9) Material
Parts Material
Material No.
Body Disc Seat Shaft
23 24
SHOWA VALVE SHOWA VALVE
FLEXIBLE RUBBER JOINT SHOWA-Flex
Fig No. 30 80 90
Item SHOWA-FLEX SCREWED SHOWA-FLEX SINGLE SPHERE SHOWA-FLEX DOUBLE SPHERE
Conection PT or NPT 125Lb. or PN16 or 10K
Body EPDM
Material Flange ーーー Mild Steel
Union Malleable lron ーーー
Appearamce
Dimension L L L
3/ 4 inch 20 ㎜ 200
1 25 200
1 1/ 4 32 200
1 1/ 2 40 200 95 175
2 50 200 105 175
2 1/ 2 65 115 175
3 80 130 175
4 100 135 225
5 125 170 225
6 150 180 225
8 200 205 325
10 250 240 325
12 300 260 325
● Operating Condition
Fig No. 30 80 90
125Lb. PN16 10K 125Lb. PN16 10K 125Lb. PN16 10K
Operating Pressure ●1.38MPa ●1.57MPa ●1.37MPa ●1.38MPa ●1.57MPa ●1.37MPa ●1.38MPa ●1.57MPa ●1.37MPa
25 26
SHOWA VALVE
LARGE SIZE Ringset Butterfly & Check Valves LARGE SIZE Ringset Butterfly & Check Valves
Fig No. 61 62 63 64
Item Ringest Butterfly Gear Ope. Ringest Butterfly Electric Ope.
Material Cast Iron・Cast Steel・Ductile Iron・Stainless
Type Flanged Wafer Flanged Wafer
Flange 10K・125Lb・10bar・16bar
Standard AWWA C-504
Retainer
Appearance
Body
Seat ring
H H H H
Dimension L W L W L W L W
Fig63 Ringset Butterfly Valve Fig67 Ringset Check Valve RBL RBH RBL RBH RBL RBH RBL RBH
8 inch 200 ㎜ 152 380 203 95 380 203 152 743 260 95 743 260
Disc 10 250 203 415 203 100 415 203 203 781 260 100 781 260
12 300 203 468 308 110 468 308 203 808 260 110 808 260
14 350 203 493 308 120 493 308 203 854 260 120 854 260
16 400 203 573 308 135 573 308 203 920 260 135 920 260
18 450 203 593 308 145 593 308 203 945 260 145 945 260
1. What is Ringset? 20 500 203 678 460 155 678 460 203 978 260 155 978 260
22 550 203 703 460 155 703 460 203 1011 260 155 1011 260
The body of a ringset valve is provided with a seat ring which is a non-integral
24 600 203 733 460 180 733 460 203 1046 260 180 1046 260
seating to the body as shown in the right figure. The seat ring is replaceable at 26 650 305 785 608 180 785 608 305 1104 210 180 1104 210
a site, so that easier maintenance of the valve can be get. This replaceabillity 28 700 305 825 500 185 825 500 305 1159 210 185 1159 210
also brings a longservice life of the valve. 30 750 305 850 500 185 850 500 305 1191 210 185 1191 210
32 800 305 905 500 205 905 500 305 1939 210 205 1939 210
34 850 305 930 710 215 930 710 305 1282 210 215 1282 210
36 900 305 965 710 225 965 710 305 1354 210 225 1354 210
38 950 305 990 710 235 990 710 305 1460 308 235 1460 308
2.Body Materials 40 1000 305 1025 710 250 1025 710 305 1496 308 250 1496 308
The body and the disc are of grey cast iron as a basic material. Other materials, such as, cast steel, stainless steel, 44 1100 305 1085 1085 710 270 1085 1085 710 305 1420 1539 308 270 1420 1539 308
48 1200 381 1150 1180 1000 280 1150 1180 1000 381 1562 1617 308 280 1562 1617 308
spheroidal graphite iron, and carbon steel are available on request. Rubber linings for the body and the disc are also
54 1350 381 1235 1345 1000 320 1235 1345 1000 381 1673 1713 308 320 1673 1713 308
available. 340 1350 1495 1000 381 1821 1881 460 340 1821 1881 460
60 1500 381 1350 1495 1000
64 1600 457 1480 1564 1100 355 1480 1564 1100 457 1866 1950 460 355 1866 1950 460
72 1800 457 1620 1744 1100 380 1620 1744 1100 457 2091 2190 610 380 2091 2190 610
3.Materials of Seat Ring and Temperature Ratings 80 2000 559 1755 1864 1200 410 1755 1864 1200 559 2195 2304 610 410 2195 2304 610
88 2200 559 1895 2044 1200 435 1895 2044 1200 559 2398 2522 610 435 2398 2522 610
Seat ring material Applicable fluid Temperature range(℃) 96 2400 559 2035 2174 1300 460 2035 2174 1300 559 2526 2684 610 460 2526 2684 610
N.R. water, weak acid, weak alkali, etc. -20 〜60
Fig No. 65 66 67
C.R. water, air, weak acid, alkali, etc. -10 〜80
Item Ringset Check
N.B.R. mineral oil, gasoline, benzine, etc. 0 〜80 Material Cast Iron・Cast Steel・Ductile Iron・Stainless
F.P.M. hot oil, steam, air, etc. -20 〜200 Type Standard With Counter Weight With Dash Pot
Flange 10K・125Lb・10bar・16bar
E.P.D.M. steam, air, etc. -20 〜120 Standard SHOWA Original
Teflon any kind of fluid -100 〜200 Appearance
27 28
SHOWA VALVE SHOWA VALVE
LARGE SIZE Gate Valve WATER WORKS BS5163 Metal Seat Gate Valve
PN16 Flanged PN25 Flanged
Fig No. 35 104W
Item EN1074-2/5163-1 EN1074-2/5163-1
Body *Cast Iron *Cast Iron
Material Seat **Gunmetal **Gunmetal
Stem 13Cr. S/S 13Cr. S/S
Working Pressure 16bar(20℃) 25bar(20℃)
Appearance
Non-Rising Stem ● Suitable for various fluid like water, sea water, sewage, chemical liquid, powder, oil
● 100% sealing
Fig No. 1 or 3Manual 1G or 8G
Fig No. 41
Operation Gear
Connection JIS10K Flanged
Body Cast Iron or Ductile Iron
Material Size 40〜300㎜
Trim Bronze or Aluminium Bronze or Z・F・Bronze or S/Steel
Material Body FC200 or FCD450-10 + Internal & External Nylon coating
Fig1-ANSI125 : 150PSI-WOG(100°F)100PSI-Steam Disc FC200 + NBR lining
Flange Standard &
Working Pressure Fig3-BS-PN16 : 16bar(-10〜120℃) Stem SUS304 + Nylon coating
Fig3-JIS10K : 0.98MPa(-10〜120℃) Max. W/P 1.0Mpa
Appearance Range W/T 0〜80℃
Nylon Coating
Corrosion prevention
Double Packing
0 leaking
125Lb.Flanged
Dimension L H W L H W
14 inch 350㎜ 381 975 450 381 1153 308
16 400 406 1132 500 406 1345 460 Pocketless Body
Turbulet flow prevention
18 450 432 1227 560 432 1445 460
20 500 457 1339 600 457 1648 610
24 600 508 1566 710 508 1852 610 Dimension 40㎜ 50㎜ 65㎜ 80㎜ 100㎜ 125㎜ 150㎜ 200㎜ 250㎜ 300㎜
28 700 610 1780 710 610 2140 760 L 80 85 90 100 100 125 150 180 190 200
32 800 660 2396 760 H 270 290 330 400 470 560 670 860 1060 1240
36 900 711 2605 760 W 160 160 160 180 180 180 224 224 300 300
40 1000 811 2777 760
29 30
SHOWA VALVE SHOWA VALVE
Double Acting Pneumatic Operation Butterfly Valve and Ball Valve Electric Operation Butterfly Valve and Ball Valve
● Waterproof to IP65
● Both of Electric and Manual Operation
● Open/close Positioning Limit Switch
● Open/close Position lndicator
● Self-Locking Mechanism
● Insulation Class F
● Power Supply
1 Phase 100/100V 200/220V
3 Phase 200/220V 400/440V
● Selection of Actuator
Manufacturer Specify( ) Non-Specify
These valves are operated by suppling compressed air mutually to the both side of cylinder. Type of Valve ( )
Material of Valve ( )
●Operating air pressure : 0.39〜0.69 MPa Size of Valve ( )mm
Q.T.Y ( )pcs.
●Accessories : Solenoid Valve・Limit Swich (1 point & 2 points)・Speed Controller・Pressure Reducing Valve ・ Fluid Name ( )
Fluid Temperature ( )℃
Filter・Mannual Operator・Lubricator
Max. Working Pressure ( )Mpa
Power Source of Moter 1phase( )V 3phase( )V
Power Source of Control ( )V
Frequency ( )Hz
Open/Close Time Specify( )sec. Non-Specify
Potentio Meter Necessary Not-Necessary
Space Heater Necessary Not-Necessary
Torque Switch Necessary Not-Necessary
LTRH-0. LTKD-01/02
2. Rotork IQ Range
These valves are operated by compressed air in the cylinder and rebound of spring.
● Selection of Actuator
Manufacturer 1. Seibu 2. Rotork 3.Limitorque 4.Others( )
●Operating air pressure : 0.39〜0.69 MPa
Type of Valve ( )
●Accessories : Solenoid Valve・Limit Switch (1 point & 2 points)・Speed Controller・Pressure Reducing Valve・ Size of Valve ( )mm
Q.T.Y ( )pcs.
Filter・Mannual Operator・Lubricator Fluid Name ( )
Fluid Temperature ( )℃ 3. Limitorque Type SMB
Max. Working Pressure ( )Mpa
Power Source of Moter ( )V
Power Source of Control ( )V
Frequency ( )Hz
Brake Necessary Not-Necessary
Indication of Remote Control Synchro Transmitter & Receiver Potentiometer Not-Necessary
Open/Close Time Specify( )sec. Non-Specify SMB-0 SMB-00
Location Indoor Outdoor
Explosion Proof Necessary Not-Necessary
Heat Proof Necessary( )℃ Not-Necessary
31 32
SHOWA VALVE SHOWA VALVE
PRECAUTIONS FOR TROUBLE-FREE OPERATION PRECAUTIONS FOR TROUBLE-FREE OPERATION
-Use suitable seal tape or compound for screw part in order to prevent leakage,rust,etc.
a) Avoid damage by throw, fall, drag, push down, contact, etc.
-Ensure suitable quantity of seal tape or compound and correct winding method.
b) Do not damage to the protector for valve to avoid its function falls off.
-Check thread matching between valve and pipe, slightly screw by hand.
c) When hanging valve, use suitable equipment, and hang valve body or prescribed position, do not hang hand wheel or gear.
Then, hang a wrench on the connection end of valve to be screwed
d) Handle carefully the valve which is coated by corrosion-resistance or heat-resistance paint / rubber lined / powder epoxy paint
to pipe. (see fig.2)
made of ceramic or synthetic resin.
-Do not tighten with superfluous torque, It causes damage by interference
e) Handle carefully the valve which has bypass valve or attached apparatus as it tends to be damaged easily.
with tip of screw part and partition of valve. (see fig.3)
-Clean the flange and gasket surface, no adhesion of harmful scratch and foreign substance.
2. Storage
-Use regular material, form & size of bolt and nut.
-Do not use gasket for butterfly valve which gasket surface is covered by rubber seat.
a) Store the valve in dry, dark and cool conditions, preferably indoors with the actual valve temperature higher than the dew point.
-When tightening bolt, keep parallel of flange faces within proper degree.
If outdoor storage is unavoidable, support the valves off the ground and protect the valves with a watertight cover.
-Do not adjust piping distortion( ex. flange center, face to face distance etc.) by bolting.
b) Shelter valve from direct sunlight ; especially packing, gasket, rubber products, resin powder paint article and electric apparatus.
Tighten bolt by hand lightly as gasket is fastened uniformity. Then, tighten again little by little
c) Do not put on the place with vibration.
and equally by torque wrench or spanner from the diagonal lined position.
d) Do not remove the valve packaging or end port protection until necessary for installation to protect against dust, rain, water dew.
This procedure must be divided into 4〜5 steps to reach to proper torque. (see fig.4)
e) In case storage period exceeds one month, suitable lubricant or rust prevention oil onto connection part, stem, etc. is required.
-When mounting external rubber- lined or coated valve, use chamfered flat washer in order to avoid damage of the surface.
3. Mounting
4.Operation
33 34
SHOWA VALVE SHOWA VALVE