Professional Documents
Culture Documents
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 225 EXCAVATOR 20S
Configuration: 225 EXCAVATOR 20S00001-UP (MACHINE)
Specifications
3304 VEHICULAR ENGINE
Media Number -SENR7590-01 Publication Date -01/10/1981 Date Updated -12/10/2001
Timing Gears
(Sleeve Metering Fuel System - PC & DI)
SMCS - 0374; 1000
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 01.09.2021
225 EXCAVATOR 20S00001-UP (MACHINE)(ZEBP0543 - 00) - Documentation Page 2 of 3
Tighten bolts which fasten into front plate to ... 17 ± 3 lb. ft.(23 ± 4 N·m)
Tighten nuts holding cover for fuel pump drive gear to ... 20 ± 5 lb. ft.(25 ± 7 N·m)
(1) With the timing pin and timing bolt correctly installed, put a clockwise force of 50 lb. ft. (70
N·m) on the drive gear for the fuel pump and tighten bolt (1) to ... 110 ± 5 lb. ft.(149 ± 7 N·m)
(2) End play for the idler gear (new) ... .004 to .016 in.(0.10 to 0.41 mm)
Bore in bearing for the idler gear (new) ... 1.3781 ± .0019 in.(35.004 ± 0.048 mm)
Diameter of shaft for idler gear (new) ... 1.3741 ± .0005 in.(34.902 ± 0.013 mm)
Clearance between shaft and bearing (new) ... .0016 to .0064 in.(0.041 to 0.163 mm)
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 01.09.2021
225 EXCAVATOR 20S00001-UP (MACHINE)(ZEBP0543 - 00) - Documentation Page 3 of 3
Maximum permissible clearance between shaft and bearing (worn) ... .009 in.(0.23 mm)
(5) End play for the balancer shafts (new) ... .0035 to .0075 in.(0.089 to 0.191 mm)
Diameter of balancer shaft bearing surface (journal) (new) ... 2.0825 ± .0005 in.(52.896 ± 0.013
mm)
Bore in bearing for balancer shaft (new) ... 2.0886 ± .0024 in.(53.050 ± 0.061 mm)
Maximum permissible clearance between balancer shaft and bearing (worn) ... .010 in.(0.25 mm)
Copyright 1993 - 2021 Caterpillar Inc. Wed Sep 1 10:14:15 UTC+0300 2021
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 01.09.2021